Influence de la variation de la viscosite avec la temperature sur le frottement avec transfert de chaleur en regime turbulent etabli

Experimental research about measurement of local friction pressure drop in fully developed turbulent flow of water in a smooth and uniformly heated circular tube has been investigated.The effect of variable viscosity with temperature in the laminar boundary layer is isolated by varying the heat flux at constant values of the local bulk Reynolds and Prandtl numbers. This severe method shows that the usual dependence of friction ratio $\text{f}{}_{\mathrm{H}}\text{f}{}_{\mathrm{iso}}$ on viscosity ratio $\text{μ}{}_{\mathrm{p}}\text{μ}{}_{\mathrm{b}}$ is more complex than the simple power law appearing in the familiar empirical results. It has been found that the exponent is a complicated function of Reynolds number and the viscosity ratio and is independent of the Prandtl number in our experimental range.We propose a new relationship for the friction coefficient ratio in which the viscosity ratio is changed by the more accurate parameter: $\text{x}\text{\$}\text{?}\text{= (-μ}{}_{\mathrm{b}}\text{-1/μ}{}_{\mathrm{p}}\text{)(μ}{}_{\mathrm{b}}\text{/μ}{}_{\mathrm{b}}\text{/μ}{}_{\mathrm{p}}\text{)}{}^{0.17}$ which is directly proportional to the heat flux when the Reynolds and the Prandtl numbers are fixed. The dispersion is caracterised by a standard deviation σ = ±0·7%, 98% of the points are within 2σ = ±1·4%. The agreement between prediction and the previously existing results can be considered satisfactory for Reynolds number from 2 × 10⁴ to 30 × 104 and Prandtl number from 2 to 6.     

Estimation de la résistance thermique de contact durant la solidification du verre

Estimation of the thermal contact resistance during glass solidification. This paper presents an experimental study of thermal contact conditions during glass moulding. Our goal was to develop an experimental setup to simulate the real contact conditions during the glass solidification and to build a numerical procedure to estimate the thermal parameters characterizing heat transfer at the contact interface (mould–glass). The semi-transparent character of glass was taken into account when building the theoretical heat transfer model. Thus a heat radiation–conduction model was built to simulate heat transfer at the interface during the glass cooling. The study shows that when the coupled conduction–radiation effect is taken into account, the parameter estimation is better. Thermal contact resistance mold–glass was estimated and the quality of heat transfer at the interface was analyzed.