共查询到20条相似文献,搜索用时 437 毫秒
1.
在过去的五年里,进口的铁矿石质量和成本都发生了一些变化。为了进一步降低采购成本,钢铁厂需对铁矿石配比和运输路线进行优化。 相似文献
2.
3.
4.
对利用两种铁矿资源的思考 总被引:5,自引:0,他引:5
对国内和国外的铁矿资源开发利用的现状进行了分析,并结合我国钢铁工业未来发展对铁矿的需求,提出了利用国外铁矿石资源的总体思路,认为充分而有效地利用国外铁矿石资源是保障我国钢铁工业稳定发展的基本战略,建议加大境外开发铁矿的力度,加强进口铁矿石的协调与管理工作,提高港口接卸能力,改善进口铁矿石陆路运输条件。 相似文献
5.
6.
铁矿石海量进口,为物流业带来了巨大商机。目前,高额的铁矿石进口物流利润,大多被国外物流企业所拿去,国内物流企业要奋起直追,力争有所作为。这不仅仅是物流业自身发展的要求,也是保障我国铁矿石进口安全的需要。 相似文献
8.
鞍钢进口铁矿石的技术经济分析 总被引:1,自引:0,他引:1
通过对鞍钢目前使用的自产铁矿石与进口铁矿石烧结和炼铁的技术经济对比分析,找到了进口铁矿石的合理方案,为鞍钢采购国外铁矿石提供 了可靠的依据。 相似文献
9.
据国内相关部门预计,到2010年我国年进口铁矿石将增加到5.4亿t,对进口铁矿石依存度将从52.5%提高到62.9%。国内更多钢铁企业都将铁矿石进口投向澳大利亚、巴西等国,而对2004、2005年开采总量分别达到1.14亿t和1.3亿t,2010年预计到达到1.67亿t的印度矿却重视不够。 相似文献
10.
11.
高炉炼铁合理配矿研究 总被引:1,自引:0,他引:1
2003年中国的生铁产量超过2亿t,作为炼铁原料的国产铁精矿和进口铁矿几乎各占一半;国产铁精矿是细粒度的磁选精矿,进口铁矿则以粉状赤铁矿为主.如何合理配矿,成为当前必须认真研究的课题.回顾了我国炼铁工作者贯彻"精料"方针取得的成就,并就国内外铁矿资源的状况、特点及合理配矿进行探讨. 相似文献
12.
铁矿在国家工业生产中占有重要地位,不同产地的铁矿在品质、有害元素含量上存在差异,为了提高海关对进口铁矿是否存在瞒报产地、以次充好等潜在风险的识别预警能力,尝试借助人工智能的方法来解决。以澳大利亚、巴基斯坦、巴西、南非、乌克兰和印度6个国家进口的共1 072批铁矿样品为研究样本,依据国家标准、行业标准对Hg、F、Cl、S、全铁(TFe)、SiO2、Al2O3、P、H2O、烧失量(L.O.I)、K2O、TiO2、MgO、CaO和Mn等15个指标进行检测。通过主成分分析提取了5个有效的主成分,累计方差贡献率为77.481%。以主成分分析提取的5个主要因子作为神经网络的输入指标,6个不同原产地作为输出指标,随机选取1 072组检测数据中的80%作为训练集,用以建立分析模型;剩下的20%作为验证集,用以验证模型的预测准确度,验证集识别准确率为100%,能够实现对6个国家铁矿原产地的准确识别。该模型的建立将直接应用于进口铁矿的产地鉴别,支撑进口铁矿的风险监管,维护贸易秩序,保障贸易便利。 相似文献
13.
陈自斌 《冶金标准化与质量》2014,(3):1-6
在全面分析研究国内外铁矿石产品品质的基础上,提出了铁矿石产品等级的划分标准,包括块矿、粉矿和精矿产品,不包括烧结矿和球团矿产品,同时确定了铁矿石产品的化学成分测定方法。 相似文献
14.
15.
对进口铁矿石评价的新法初探 总被引:1,自引:0,他引:1
介绍了对进口铁矿石评价的传统方法及其存在的问题。提出了一种新的“硅平衡单烧”评价法,并结合马钢的原料状况,用新评价法对7种进口铁矿石从烧结和冶金性能两个方面进行比较。结果表明,巴西A粉矿、C粉矿、澳D矿应为首选配用矿种;B粉矿的综合性能稍差于A粉矿;E、G矿的配入量不宜过高;F粉矿的综合性能较差,应适当减少其配用量。 相似文献
16.
高铝铁矿和高锰铁矿是两种储量丰富但又极难分选的铁矿资源,实现铁、锰、铝的高效综合利用具有重要意义.本文研究了这两种铁矿石工艺矿物学,考查了单矿种及两者的混合矿种的直接还原行为及还原过程中的矿物组成演变,揭示了相应的还原机理.结果表明:高铝铁矿难还原,其机理为经还原后仅部分铁氧化物转化为金属铁,其余的铁与铝、硅矿物形成难还原的铁橄榄石和铁尖晶石;高锰铁矿易还原,其中的铁氧化物大部分被还原成金属铁,锰氧化物与铝、硅矿物结合形成锰尖晶石和锰橄榄石,促进了铁氧化物的还原.而且在相同还原条件下,高锰铁矿球团金属化率比高铝铁矿高30个百分点,前者还原性明显优于后者.两种矿进行共还原,当高锰铁矿配比达到60%时,球团金属化率就可大于90%.锰氧化物的存在对高铝铁矿石中铁氧化物的还原具有显著的促进作用. 相似文献
17.
U. Srivastava 《Mineral Processing and Extractive Metallurgy Review》2013,34(4):361-371
The conventional routes for making iron and steel require that the ore be upgraded through a series of physical separation processes in sequence. The unit operations involved include crushing, grinding, separation, dewatering, pelletization, blast furnace processing, and basic oxygen furnace processing. This complex sequence is not cost effective for many low-grade ores that are resistant to physical concentration. For example, many ores contain iron oxide in a nonmagnetic form and are so fine-grained that it is uneconomical to grind them to a fine enough size to separate the iron oxides from the gangue. Exploitation of these iron minerals needs to take a different approach, using fewer process steps than are required for conventional ironmaking. Results are presented showing that it is possible to produce metallic iron directly from low-grade ores. The metal is in a form that can be easily separated to produce a high-grade iron product, and the iron recovery is greater than can be achieved from difficult-to-process ores by conventional means. 相似文献
18.
《钢铁冶炼》2013,40(8):613-619
AbstractTin, zinc bearing complex iron ores are typically intractable and have not been efficiently utilised in China. In this investigation, the process mineralogy of the tin, zinc bearing iron ores and reduction behaviours of iron, tin and zinc oxides by CO were investigated. A selective reduction roasting process was initially developed to separate tin and zinc from the complex iron ores. Under optimum conditions, most of the tin and zinc were effectively removed from the iron ore pellets, and the roasted pellets could be used as high quality ironmaking burdens for large scale blast furnaces. 相似文献
19.
20.
The worldwide steel companies are expected to use low grade iron ores such as pisolitic iron ores, high Al2O3 iron ores and ultrafine iron ores etc. in their sinter blends due to the depletion of high grade iron ores or for the economic reason. This study investigated the methods for improving sintering characteristics without deteriorating sintering productivity and sinter quality by blending mini-pellets comprising high Al2O3 pisolitic iron ores and ultrafine iron ores containing low alumina. The results showed that the blending of iron ore mini-pellets produced by selective granulation is an effective way to improve sintering productivity and sinter quality without increasing the Al2O3 content in sinter as well as to effectively utilise high Al2O3 iron ores and ultrafine iron ores in the sintering process. 相似文献