共查询到20条相似文献,搜索用时 125 毫秒
1.
《阀门》2014,(5)
正西安亚星泵阀制造有限责任公司是一家民营高新技术企业,专业从事化肥、尿素、氯碱工业用高中压阀门及管件,拥有自主知识产权多项:1.尿素管线用高压截止阀ZL 98 2 32658.02.夹套无内漏保温截止阀ZL 2014 20169366.73.不停车更换玻璃板液位计ZL 2007 20032709.54.高压差放氨阀ZL 2006 20135881.95.高压截止节流阀ZL 2006 20135881.96.无堵卡高效止回阀ZL 2007 20032711.27.组合式高压止回阀ZL 002 26849.38.直线式升降高、中、低压截止阀ZL 01 240509.4以上专利产品,均处于国内领先水平,深受尿素生产企业的青睐。目前客户遍布山东、山西、河南、四川、重庆、云南、福建、黑龙江、内蒙古、辽宁和吉林等二十多个省市,由于业务范围不断扩大,企 相似文献
2.
4.
5.
6.
7.
基于Ansys对艇用止回阀抗冲击要求进行分析,求解了止回阀冲击应力结果,并对其进行评定。获得了止回阀抗冲击分析的常用方法,缩短了研发周期。 相似文献
8.
介绍了一种专利止回阀——压缩机用双气阀式止回阀,与其他止回阀相比较,优点是更换方便,噪声低,使用寿命长。 相似文献
9.
10.
11.
12.
根据加速寿命试验和并行节能技术原理,针对FAST液压促动器中故障致命度较大的元件提出并设计出一种能同时测试多个齿轮泵、溢流阀及单向阀样本的加速寿命试验台。与普通可靠性试验台相比,该试验台具有单次试验样本种类多、数量多、试验周期短及能耗低等优点。试验在多种应力等级下进行,以冲击载荷作为加速因子进行齿轮泵的冲击寿命试验及单向阀和溢流阀的加速启闭试验。文章详细介绍了试验台的总体设计方案及所采用的关键技术,该试验台的设计方法可为其他核心液压元件加速寿命试验台的设计提供参考。 相似文献
13.
JIN Jiamei WANG Yin YANG Ying ZHANG Jianhui State Key Laboratory of Mechanics Control of Mechanical Structures Nanjing University of Aeronautics Astronautics Nanjing China Received September revised October accepted October published electronically October 《机械工程学报(英文版)》2011,(6):1130-1135
There are two kinds of piezoelectric pumps:check valve pumps and valve-less pumps.Whether to use a check valve or not depends upon the application occasion.To achieve large backpressure for higher flow rates,the pump with check valve is desirable.However,adding check valves implies more complex structure and higher probability of valve blocking,etc.In order to solve the problem,effective driving and transport mechanics with compact construction and reliable service are being sought.In this paper,using the second-order longitudinal vibration mode of a bar-shaped piezoelectric vibrator for driving fluid,a piezoelectric pump is successfully made.The proposed piezoelectric pump consists of coaxial cylindrical shells and a bar-shaped piezoelectric vibrator,which has a disk part and a cone part.The lead zirconium titanate ceramic rings fixed in the vibrator are polarized along the thickness direction.When the second-order longitudinal vibration of the vibrator along its axis is excited,the disk part of the vibrator changes periodically the volume of the chamber and the cone part acts as a pin valve,driving the fluid from the inlet port to the outlet port.Finite elements analysis on the proposed pump model is carried out to verify its operation principle and design by the commercial FEM software ANSYS.Components of the piezoelectric pump were manufactured,assembled,and tested for flow rate and backpressure to validate the concepts of the proposed pump and confirm the simulation results of modal and harmonic analyses.The test results show that the performance of the proposed piezoelectric pump is about 910 mL/min in flow rate with a highest pressure level of 1.5 kPa under 400 V peak-to-peak voltage and 51.7 kHz operating frequency.It is confirmed that this bar-shaped piezoelectric transducer can be effectively applied in fluid transferring mechanism of pump through this research. 相似文献
14.
15.
16.
S. Rittidech N. Pipatpaiboon S. Thongdaeng 《Journal of Mechanical Science and Technology》2010,24(2):545-550
This research investigated the thermal performance of various horizontal closed-loop oscillating heat-pipe systems with check
valves (HCLOHPs/CVs). Numerous test systems were constructed using copper capillary tubes with assorted inner diameters, evaporator
lengths, and check valves. The test systems were evaluated under normal operating conditions using ethanol, R123, and distilled
water as working fluids. The system’s evaporator sections were heated by hot water from a hot bath, and the heat was removed
from the condenser sections by cold water from a cool bath. The adiabatic sections were well insulated with foam insulators.
The heat-transfer performance of the various systems was evaluated in terms of the rate of heat transferred to the cold water
at the condenser. The results showed that the heat-transfer performance of an HCLOHP/CV system could be improved by decreasing
the evaporator length. The highest performance of all tested systems was obtained when the maximum number of system check
valves was 2. The maximum heat flux occurred with a 2 mm inner diameter tube, and R123 was determined to be the most suitable
working fluid. 相似文献
17.
在讨论宝钢N2 炼钢煤气冷却高压给水系统控制过程的基础上 ,通过空排止回阀系统动态特性试验研究 ,并根据企业节能技术改造实践和现场长期运行使用情况 ,分析了空排止回阀系统的开发应用前景及其社会经济效益 相似文献
18.
介绍了空排止回阀的用途、结构特点及原理。并以公称压力20MPa,公称通径175mm的空排止回阀为例,简述了旁通节流部分的设计与计算。 相似文献
20.
叙述了艇用止回阀的阻力系数设计过程中待确定的要点,并基于COSMOSFlow Works对艇用止回阀的阻力系数进行模拟仿真求解,求解了止回阀内部压力特性的结果,给出了预计的确定阀门阻力系数的一般方法。 相似文献