This paper describes how morphology of PVC changes in the Brabender mixing head. At the range of temperatures used for PVC processing, the Brabender torque-time curve shows minimum torque and maximum torque. The minimum torque is associated with a breakdown of 150 μm PVC grains and 10 μm agglomerates resulting in the release of the 1μm primary particles. The torque increases from minimal interaction between primary particles to the point where primary particles agglomerate at maximum torque so that fibriles can be formed when PVC samples are swollen in acetone and sheard. Further heating reduces the viscosity resulting in lower torque even though residual primary particles still exist with much particle to particle interaction. Primary particle structure disappears at about 215° C with complete melting. 相似文献
An improvement to a previously published suspension polymerization process for the production of spherical core/shell PVAc/PVA particles is described. To increase the settling time of the beads in the suspension, an expansion stage was introduced. The core/shell structure was obtained through the partial hydrolysis of the PVAc. The particle density was manipulated through addition of a solvent during the suspension polymerization stage and posterior expansion of the polymer beads obtained at the end of the process. This technique allows for effective reduction of the density of the final polymer beads. The expansion stage exerts also a beneficial effect on particle drying, avoiding particle aggregation during post‐polymerization processing of the polymer beads.
This work provides an up‐to‐date review of the fire properties of poly(vinyl chloride) (PVC) materials, both rigid (unplasticized) and flexible (plasticized). The fire properties addressed include ignitability, ease of extinction (oxygen index), flame spread (small scale and intermediate scale), heat release, smoke obscuration, smoke toxicity, hydrogen chloride emission and decay, and performance in real‐scale fires. This comprehensive review includes a wide selection of references and tables illustrating the properties of PVC materials in comparison with those of other polymeric materials, including, in many instances, wood materials. The work puts these fire properties in perspective, showing that the heat release rate (the key fire property) of rigid PVC (and that of properly flame‐retarded flexible PVC) are among the lower values found for combustible materials. This work also shows that the smoke toxicity and smoke obscuration resulting from burning PVC materials in real‐scale fires is in the same range as those of other materials. 相似文献
The use of a fluidised bed reactor and a conductivity cell provide a technique for the study of degradation of PVC with greatly increased sensitivity. The kinetics of the reaction may be studied at 350 K and for small (1%) amounts of degradation. The effects of diffusion within the particles may be distinguished from that of diffusion in the surrounding atmosphere. The influence of temperature and particle size and sintering were examined. The catalytic effect of HCl was confirmed and an apparent activation energy of 29 kcal mol?1 was observed. 相似文献
