低临界胶束浓度PEGMA-b-PCL的制备及其 药物缓释性能

以ε-己内酯（ε-CL）为疏水链段,聚乙二醇甲醚甲基丙烯酸酯（PEGMA）为亲水链段,4-氰基-4-[(十二烷基硫基硫羰基)硫基]戊酸（CDPA）为可逆加成-断裂链转移（RAFT）试剂,在以甲苯为溶剂、N2氛围、80 ℃、反应24 h的条件下,通过RAFT聚合法制备了两嵌段聚合物PEGMA-b-PCL。将其自组装为胶束用作纳米药物载体,并以姜黄素（Cur）为胶束负载药物。考察了两嵌段聚合物结构、分子量及分布,表征了胶束载体粒径、形貌,测试了胶束载体的载药和释药性能。结果表明,不同嵌段聚合物相对分子质量范围为478~7318,此类聚合物具有较低的临界胶束浓度（CMC）,在常规条件下（pH=7.4）其范围为0.920~1.600 μg/mL。胶束载体粒径范围为:68.34~186.30 nm。当n(CDPA)∶n(ε-CL)=1∶200时,胶束载药量和包封率最高,可达12.05%和75.26%。在不同pH值环境下,药物缓释性能可达15 d,其中pH=5.0时释药量可达35.38%。     

两亲性聚合物制备及其性能的研究

利用开环聚合反应制备了两亲性聚合物马来酰亚胺-聚乙二醇-聚己内酯(mal-PEG-PCL),通过1H-NMR对聚合物的结构进行了表征;以荧光染料尼罗红为探针,利用荧光分光光度法测定了聚合物的临界胶束浓度(CMC);采用透析法对脂溶性药物阿霉素(DOX)进行包载,并进一步考察载药胶束在不同pH环境下的体外释药情况。结果表明:聚合物mal-PEG-PCL的CMC为156μg·m L~(-1);载药量为14. 71%,包封率为36. 78%;体外释药初步表明36 h内载药胶束释药可达83%,并具有明显的酸响应能力。     

星形共聚物聚己内酯-聚丙烯酸羟基乙酯的合成与载药性能

通过原子转移自由基聚合(ATRP)制备了两亲性线形共聚物聚己内酯-聚丙烯酸羟基乙酯(LPCLPHEA)及四臂星形共聚物聚己内酯-聚丙烯酸羟基乙酯(4s PCL-PHEA),以芘为荧光探针,测定两种聚合物的临界胶束浓度(CMC),并以阿霉素(DOX)为模型药物,分析探讨聚合物的载药能力。实验通过红外光谱(FT-IR)、荧光分光光度计、马尔文激光粒度仪等对聚合物的结构、粒径、Zeta电位、载药等性能进行表征。结果表明,两种聚合物都能形成稳定的载药胶束,其中四臂星形结构聚合物比线形聚合物具有较低的粒径和临界胶束浓度、较高的载药量和包封率,可作为药物载药材料进行进一步研究。     

二硫键链接的两亲性嵌段合物的合成及胶束化研究

通过二硫吡啶基活化的聚乙二醇与巯基聚己内酯之间的偶联反应,在聚乙二醇单元与聚己内酯单元间引入二硫键,合成二嵌段共聚物mPEG-SS-PCL,通过核磁氢谱和红外光谱等手段对聚合物的结构进行表征。以阿霉素(DOX)为药物模型,通过紫外分光光度法分析了聚合物对脂溶性药物的包载能力,用激光粒度仪测定胶束粒径、粒径分布。结果表明,空白胶束及载药胶束的平均粒径分别为117.7nm和146.1nm,该聚合物对阿霉素具有良好的药物包载能力,最高载药量为16.28%,包封率为54.26%。     

生物可降解两亲性嵌段共聚物胶束的制备及其对叶酸的控制释放

以甲氧基聚乙二醇(mPEG)为引发剂,在辛酸亚锡催化下引发ε-环己内酯(CL)开环聚合,合成了聚乙二醇-聚己内酯两亲性嵌段共聚物(mPEG-PCL)。通过FTIR、1H-NMR及GPC等表征手段确定了mPEG-PCL的组成及结构。采用芘荧光探针法、透射电镜和动态激光光散射研究了聚合物在水中的自组装行为。结果表明:聚合物在水溶液中能够自组装形成粒径小于100 nm的规则球状胶束,且具有较低的临界胶束浓度(7.35×10-3 g/L);模型药物(叶酸)成功负载于聚合物纳米胶束内,并且能延缓叶酸的释放,其释药速率受载药量和释放介质pH的影响。     

pH响应型mPEG-PCL嵌段共聚物胶束用作药物运输

该文合成了一种具有pH敏感性,较低毒性的两亲性嵌段共聚物以用于药物运输。聚乙二醇-聚己内酯(mPEG-PCL)是以聚乙二醇单甲醚为引发剂,开环己内酯聚合而成,阿霉素则是通过顺乌头酸裂解键连在聚己内酯的末端。该嵌段聚合物通过核磁共振、红外光谱等进行表征。共轭阿霉素后的嵌段聚合物在水溶液中能够自组装形成胶束,胶束粒径约为45.4 nm,透射电镜显示胶束具有近似的球形结构。阿霉素在pH=4.0下的释放速率明显快于pH=7.4下的释放速率。mPEG-PCL在细胞培养中无细胞毒性,包载阿霉素的胶束在人类MCF-7乳腺癌细胞上表现出迟缓的细胞毒性。通过共聚焦显微镜观察游离阿霉素和mPEG-PCL-DOX胶束在MCF-7细胞内的定位说明载体能够携带阿霉素进入细胞。     

降解法制备聚己内酯-聚乙二醇两亲性共聚物纳米胶束

用降解方法合成了聚己内酯(PCL)与聚乙二醇(PEG)两亲性嵌段聚合物聚己内酯-聚乙二醇(PCL-b-PEG),并制成了胶束溶液。用红外光谱(FTIR)、核磁共振(NMR)、荧光光谱(FS)、纳米粒度仪及透射电镜(TEM)对聚合物胶束进行了表征。结果表明,临界胶束浓度(CMC)随着聚合物分子量的增大而减小,胶束粒径随着共聚物中聚己内酯含量的增大而增大。用热重分析(TGA),差热方法(DSC)分析了该双亲性嵌段共聚物的热学性能。此方法合成胶束,步骤简单、成本低廉、胶束粒径分布较窄。     

pH值响应聚乙二醇化壳聚糖基隐形纳米胶束的制备及其载药性能

聚乙二醇单甲醚(mPEG)先经过氯乙酸羧化后,再通过酰化反应接枝到双烷基壳聚糖上,制备高接枝度的N,N-双十二烷基-3,6-O-mPEG-壳聚糖(PEDLCS)双亲性衍生物,用¹H NMR、FTIR、EA等对产物进行表征,并用透析法制得PEDLCS载酮洛芬(KP)胶束。结果表明,PEDLCS在水溶液中能自组装形成胶束,CMC值为0.1170mg/mL;载药胶束的最优投料比为KP/PEDLCS=0.8:1,载药量34.48%,包封率65.78%,粒径155.1nm,Zeta电位-31.6mV。载药胶束在不同pH值条件下的响应性实验表明,随着pH值的减小,胶束的稳定性降低,胶束粒径变大,具有可逆性。pH值响应范围符合肿瘤细胞微环境(pH值为7.2～6.0),有望成为具有pH值响应主动靶向的隐形纳米胶束。     

水溶性紫杉醇两亲性共聚物纳米胶束研究

聚乙二醇聚己内酯聚乙二醇采用三嵌段共聚物为载体包载紫杉醇形成纳米胶束,胶束具有明显的核壳结构,有效地改善了紫杉醇的水溶性。研究表明,采用蒸发溶剂法、透析法和熔融法制备的胶束对紫杉醇都呈现良好的包封效果,其中,以熔融法制得的胶束粒径最小,分布最窄。文中还考察了蒸发溶剂法实验条件对胶束的影响,发现低沸点有机溶剂有利于获得小粒径胶束,胶束平均粒径随着载药量的提高相应增大。体外释药的结果表明,载药量高的胶束释药率却相对较小。     

芦丁β-环糊精聚合物的制备及性能研究

以β-环糊精为原料,以载药量、包封率、综合评分为指标,考察了m(芦丁)∶m(β-环糊精聚合物微球)对载药量、包封率的影响。研究了不同m(芦丁)∶m(β-环糊精聚合物微球)在不同pH值条件下的释药情况。结果表明,当m(芦丁)∶m(β-环糊精聚合物微球)=0.02∶1时,包合效果较为理想。释药性能实验表明释药过程缓慢而持久,不同投料比释药在pH=1.2条件下总体较pH=7.4时更为缓慢,释药过程符合一级方程。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。