Performance evaluation of printed LiCoO2 cathodes with PVDF-HFP gel electrolyte for lithium ion microbatteries

In order to improve the discharge capacity in lithium ion microbatteries, a thick-film cathode was fabricated by a screen printing using LiCoO₂ pastes. The printed cathode showed a different discharge curves when the cell was tested using various (liquid, gel and solid-state) electrolytes. When a cell test was performed with organic liquid electrolyte, the maximum discharge capacity was 200 μAh cm⁻², which corresponded to approximately 133 mAh g⁻¹ when the loading weight of LiCoO₂ was calculated. An all-solid-state microbattery could be assembled using sputtered LiPON electrolyte, an evaporated Li anode, and printed LiCoO₂ cathode films without delamination or electrical problems. However, the highest discharge capacity showed a very small value (7 μAh cm⁻²). This problem could be improved using a poly(vinylidene fluoride-hexafluoro propylene) (PVDF-HFP) gel electrolyte, which enhanced the contact area and adhesion force between cathode and electrolyte. The discharge value of this cell was measured as approximately 164 μAh cm⁻² (≈110 mAh g⁻¹). As the PVDF-HFP electrolyte had a relatively soft contact property with higher ionic conductance, the cell performance was improved. In addition, the cell can be fabricated in a leakage-free process, which can resolve many safety problems. According to these results, there is a significant possibility that a film prepared using the aforementioned paste with screen printing and PVDF-HFP gel electrolyte is feasible for a microbattery.     

Polyvinylpyrrolidone-assisted synthesis of microscale C-LiFePO4 with high tap density as positive electrode materials for lithium batteries

Carbon-coated LiFePO₄ (C-LiFePO₄) with micron particle size (6 μm) and high tap density (1.6 g cm⁻³) was prepared from spherical FePO₄·2H₂O powder via the co-precipitation method. The C-LiFePO₄ powder was calcined at temperatures between 650 and 800 °C. The 6 μm C-LiFePO₄ prepared at 800 °C exhibited an excellent rate capability, delivering 150 mAh g⁻¹ on discharge at the 0.1 C-rate and 108 mAh g⁻¹ at the 5 C-rate. The volumetric capacity of the 6 μm C-LiFePO₄ corresponded to 225 mAh cm⁻³, since the large secondary particles (6 μm) C-LiFePO₄ sufficiently allowed tight packing of the particles. The 6 μm C-LiFePO₄ powder with high tap density makes an attractive positive electrode candidate for lithium-ion batteries designed for high energy density.     

Electrochemical performance of all-solid-state lithium secondary batteries with Li-Ni-Co-Mn oxide positive electrodes

LiNi_1/3Co_1/3Mn_1/3O₂ was applied as a promising material to the all-solid-state lithium cells using the 80Li₂S·19P₂S₅·1P₂O₅ (mol%) solid electrolyte. The cell showed the first discharge capacity of 115 mAh g⁻¹ at the current density of 0.064 mA cm⁻² and retained the reversible capacity of 110 mAh g⁻¹ after 10 cycles. The interfacial resistance was observed in the impedance spectrum of the all-solid-state cell charged to 4.4 V (vs. Li) and the transition metal elements were detected on the solid electrolyte in the vicinity of LiNi_1/3Co_1/3Mn_1/3O₂ by the TEM observations with EDX analyses. The electrochemical performance was improved by the coating of LiNi_1/3Co_1/3Mn_1/3O₂ particles with Li₄Ti₅O₁₂ film. The interfacial resistance was decreased and the discharge capacity was increased from 63 to 83 mAh g⁻¹ at 1.3 mA cm⁻² by the coating. The electrochemical performance of LiNi_1/3Co_1/3Mn_1/3O₂ was compared with that of LiCoO₂, LiMn₂O₄ and LiNiO₂ in the all-solid-state cells. The rate capability of LiNi_1/3Co_1/3Mn_1/3O₂ was lower than that of LiCoO₂. However, the reversible capacity of LiNi_1/3Co_1/3Mn_1/3O₂ at 0.064 mA cm⁻² was larger than that of LiCoO₂, LiMn₂O₄ and LiNiO₂.     

The preparation of nano-sulfur/MWCNTs and its electrochemical performance

In this work, a novel nano-sulfur/MWCNTs composite with modified multi-wall carbon nano-tubes (MWCNTs) as sulfur-fixed matrix for Li/S battery is reported. Based on different solubility of sulfur in different solvents, nano-sulfur/MWCNTs composite was prepared by solvents exchange method. The composite was characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The modified MWCNTs are considered that not only acts as a conducting material, but also a matrix for sulfur. The electrochemical performance of the nano-sulfur/MWCNTs composite was tested. The results indicated that nano-sulfur/MWCNTs composite had the specific capacity of 1380 mAh g⁻¹, 1326 mAh g⁻¹ and 1210 mAh g⁻¹ in the initial cycle at 100 mA g⁻¹, 200 mA g⁻¹ and 300 mAh g⁻¹ discharge rates respectively, and remained a reversible capacity of 1020 mAh g⁻¹, 870 mAh g⁻¹ and 810 mAh g⁻¹ after 30 cycles. The electrochemical performances confirm that the modified MWCNTs as sulfur-fixed matrix show better ability than any other carbon in cathode of Li/S batteries that had been reported.     

Enhanced electrochemical properties of LiFePO4/C synthesized with two kinds of carbon sources,PEG-4000 (organic) and Super p (inorganic)

Olivine structured LiFePO₄/C cathode was synthesized via a freeze-drying route and followed by microwave heating with two kinds of carbon sources: PEG-4000 (organic) and Super p (inorganic). XRD patterns indicate that the as-prepared sample has an olivine structure and carbon modification does not affect the structure of the sample. Image of SEM shows a uniform and optimized particles size, which greatly improves the electrochemical properties. TEM result reveals the amorphous carbon around the surface of the particles. At a low rate of 0.1 C, the LiFePO₄/C sample presents a high discharge capacity of 157.8 mAh g⁻¹ which is near the theoretical capacity (170 mAh g⁻¹), and it still attains to 149.1 mAh g⁻¹ after 200 cycles. It also exhibits an excellent rate capacity with high discharge capacities of 143.2 mAh g⁻¹, 137.5 mAh g⁻¹, 123.7 mAh g⁻¹ and 101.6 mAh g⁻¹ at 0.5 C, 1.0 C, 2.0 C and 5.0 C, respectively. EIS results indicate that the charge transfer resistance of LiFePO₄ decreases greatly after carbon coating.     

Electrospun hydrophilic fumed silica/polyacrylonitrile nanofiber-based composite electrolyte membranes

Hydrophilic fumed silica (SiO₂)/polyacrylonitrile (PAN) composite electrolyte membranes were prepared by electrospinning composite solutions of SiO₂ and PAN in N,N-dimethylformamide (DMF). Among electrospinning solutions with various SiO₂ contents, the 12 wt% SiO₂ in PAN solution has highest zeta potential (−40.82 mV), and exhibits the best dispersibility of SiO₂ particles. The resultant 12 wt% SiO₂/PAN nanofiber membrane has the smallest average fiber diameter, highest porosity, and largest specific surface area. In addition, this membrane has a three-dimensional network structure, which is fully interconnected with combined mesopores and macropores because of a good SiO₂ dispersion. Composite electrolyte membranes were prepared by soaking these porous nanofiber membranes in 1 M lithium hexafluorophosphate (LiPF₆) in ethylene carbonate (EC)/dimethyl carbonate (DMC) (1:1 vol%). It is found that 12 wt% SiO₂/PAN electrolyte membrane has the highest conductivity (1.1 × 10⁻² S cm⁻¹) due to the large liquid electrolyte uptake (about 490%). In addition, the electrochemical performance of composite electrolyte membranes is also improved after the introduction of SiO₂. For initial cycle, 12 wt% SiO₂/PAN composite electrolyte membrane delivers the discharge capacity of 139 mAh g⁻¹ as 98% of theoretical value, and still retains a high value of 127 mAh g⁻¹ as 89% at 150th cycle, which is significantly higher that of pure PAN nanofiber-based electrolyte membranes.     

Electrochemical investigations of ionic liquids with vinylene carbonate for applications in rechargeable lithium ion batteries

Ionic liquids based on methylpropylpyrrolidinium (MPPY) and methylpropylpiperidinium (MPPI) cations and bis(trifluoromethanesulfonyl)imide (TFSI) anion have been synthesized and characterized by thermal analysis, cyclic voltammetry, impedance spectroscopy as well as galvanostatic charge/discharge tests. 10 wt% of vinylene carbonate (VC) was added to the electrolytes of 0.5 M LiTFSI/MPPY.TFSI and 0.5 M LiTFSI/MPPI.TFSI, which were evaluated in Li || natural graphite (NG) half cells at 25 °C and 50 °C under different current densities. At 25 °C, due to their intrinsic high viscosities, the charge/discharge capacities under the current density of 80 μA cm⁻² were much lower than those under the current density of 40 μA cm⁻². At 50 °C, with reduced viscosities, the charge/discharge capacities under both current densities were almost indistinguishable, which were also close to the typical values obtained using conventional carbonate electrolytes. In addition, the discharge capacities of the half cells were very stable with cycling, due to the effective formation of solid electrolyte interphase (SEI) on the graphite electrode. On the contrary, the charge/discharge capacities of the Li || LiCoO₂ cells using both ionic liquid electrolytes under the current density of 40 μA cm⁻² decreased continually with cycling, which were primarily due to the low oxidative stability of VC on the surface of LiCoO₂.     

Small capacity decay of lithium iron phosphate (LiFePO4) synthesized continuously in supercritical water: Comparison with solid-state method

Nanosize lithium iron phosphate (LiFePO₄) particles are synthesized using a continuous supercritical hydrothermal synthesis method at 25 MPa and 400 °C under various flow rates. The properties of LiFePO₄ synthesized in supercritical water including purity, crystallinity, atomic composition, particle size, surface area and thermal stability are compared with those of particles synthesized using a conventional solid-state method. Smaller size particles ranging 200-800 nm, higher BET surface area ranging 6.3-15.9 m² g⁻¹ and higher crystallinity are produced in supercritical water compared to those of the solid-state synthesized particles (3-15 μm; 2.4 m² g⁻¹). LiFePO₄ synthesized in supercritical water exhibit higher discharge capacity of 70-80 mAh g⁻¹ at 0.1 C after 30 cycles than that of the solid-state synthesized LiFePO₄ (60 mAh g⁻¹), which is attributed to the smaller size particles and the higher crystallinity. Smaller capacity decay at from 135 to 125 mAh g⁻¹ is observed during the 30 cycles in carbon-coated LiFePO₄ synthesized using supercritical water while rapid capacity decay from 158 to 140 mAh g⁻¹ is observed in the carbon-coated LiFePO₄ synthesized using the solid-state method.     

A proton-conducting composite membrane: Sn0.95Al0.05P2O7 and polystyrene-b-poly(ethylene/propylene)-b-polystyrene

An anhydrous proton conductor, Sn_0.95Al_0.05P₂O₇ (SAPO), composed of polystyrene-b-poly(ethylene/propylene)-b-polystyrene (SEPS), was developed and characterized using morphological, structural, and electrochemical analyses. In the composite membrane with 20 wt% SEPS, a homogeneous distribution of SAPO particles in the matrix was obtained in the thickness range of 65-90 μm, yielding a proton conductivity of 3.4 × 10⁻³ S cm⁻¹ at 200 °C, tensile strength of 4.6 MPa and an elongation at break of 711.0% at room temperature. Fuel cell tests verified that the open-circuit voltage was maintained at a constant value of approximately 1 V between 100 and 250 °C. The peak power densities achieved with unhumidified H₂ and air were 77.0 mW cm⁻² at 100 °C, 121.0 mW cm⁻² at 150 °C, and 163.1 mW cm⁻² at 225 °C.     

LiCoO2 thin film cathode fabrication by rapid thermal annealing for micro power sources

The rapid thermal annealing (RTA) process was employed to obtain crystalline LiCoO₂ thin films. XRD analyses of the LiCoO₂ thin film show increased crystallinity with an increase in the RTA time. The Auger electron spectroscopic analysis of the LiCoO₂ film strongly suggests that the RTA process is more advantageous to obtain a stable inter layer between the substrate and the deposited film and between each deposited layer than the conventional annealing process. All-solid-state thin film cells composed of Li/lithium phosphorous oxynitride (Lipon)/LiCoO₂ systems were fabricated using the LiCoO₂ cathode treated with RTA. The optimum condition of RTA would be 900 s at 650 °C, which exhibited a good rate capability for high power applications. Two cells were connected in parallel to obtain a higher discharge current, and they showed a specific capacity of 38.4 μAh cm⁻² μm⁻¹ even at a 25C rate (current density: 7.96 mA cm⁻²).     

Synthesis and characterization of high-density LiFePO4/C composites as cathode materials for lithium-ion batteries

To achieve a high-energy-density lithium electrode, high-density LiFePO₄/C composite cathode material for a lithium-ion battery was synthesized using self-produced high-density FePO₄ as a precursor, glucose as a C source, and Li₂CO₃ as a Li source, in a pipe furnace under an atmosphere of 5% H₂-95% N₂. The structure of the synthesized material was analyzed and characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The electrochemical properties of the synthesized LiFePO₄/carbon composite were investigated by cyclic voltammetry (CV) and the charge/discharge process. The tap-density of the synthesized LiFePO₄/carbon composite powder with a carbon content of 7% reached 1.80 g m⁻³. The charge/discharge tests show that the cathode material has initial charge/discharge capacities of 190.5 and 167.0 mAh g⁻¹, respectively, with a volume capacity of 300.6 mAh cm⁻³, at a 0.1C rate. At a rate of 5C, the LiFePO₄/carbon composite shows a high discharge capacity of 98.3 mAh g⁻¹ and a volume capacity of 176.94 mAh cm⁻³.     

Polyethylene multiwalled carbon nanotube composites

Polyethylene (PE) multiwalled carbon nanotubes (MWCNTs) with weight fractions ranging from 0.1 to 10 wt% were prepared by melt blending using a mini-twin screw extruder. The morphology and degree of dispersion of the MWCNTs in the PE matrix at different length scales was investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM) and wide-angle X-ray diffraction (WAXD). Both individual and agglomerations of MWCNTs were evident. An up-shift of 17 cm⁻¹ for the G band and the evolution of a shoulder to this peak were obtained in the Raman spectra of the nanocomposites, probably due to compressive forces exerted on the MWCNTs by PE chains and indicating intercalation of PE into the MWCNT bundles. The electrical conductivity and linear viscoelastic behaviour of these nanocomposites were investigated. A percolation threshold of about 7.5 wt% was obtained and the electrical conductivity of PE was increased significantly, by 16 orders of magnitude, from 10⁻²⁰ to 10⁻⁴ S/cm. The storage modulus (G′) versus frequency curves approached a plateau above the percolation threshold with the formation of an interconnected nanotube structure, indicative of ‘pseudo-solid-like’ behaviour. The ultimate tensile strength and elongation at break of the nanocomposites decreased with addition of MWCNTs. The diminution of mechanical properties of the nanocomposites, though concomitant with a significant increase in electrical conductivity, implies the mechanism for mechanical reinforcement for PE/MWCNT composites is filler-matrix interfacial interactions and not filler percolation. The temperature of crystallisation (T_c) and fraction of PE that was crystalline (F_c) were modified by incorporating MWCNTs. The thermal decomposition temperature of PE was enhanced by 20 K on addition of 10 wt% MWCNT.     

Effect of zwitterionic salt on the electrochemical properties of a solid polymer electrolyte with high temperature stability for lithium ion batteries

In this study, we prepare a kind of solid polymer electrolyte (SPE) based on N-ethyl-N′-methyl imidazolium tetrafluoroborate (EMIBF₄), LiBF₄ and poly(vinylidene difluoride-co-hexafluoropropylene) [P(VdF-HFP)] copolymer. The resultant SPE displays high thermal stability above 300 °C and high room temperature ionic conductivity near to 10⁻³ S cm⁻¹. Its electrochemical properties are improved with incorporation of a zwitterionic salt 1-(1-methyl-3-imidazolium)propane-3-sulfonate (MIm3S). When the SPE contains 1.0 wt% of the MIm3S, it has a high ionic conductivity of 1.57 × 10⁻³ S cm⁻¹ at room temperature, the maximum lithium ions transference number of 0.36 and the minimum apparent activation energy for ions transportation of 30.9 kJ mol⁻¹. The charge-discharge performance of a Li₄Ti₅O₁₂/SPE/LiCoO₂ cell indicates the potential application of the as-prepared SPE in lithium ion batteries.     

Synthesis of Pt nanocatalyst with micelle-encapsulated multi-walled carbon nanotubes as support for proton exchange membrane fuel cells

Micelle-encapsulated multi-walled carbon nanotubes (MWCNTs) with sodium dodecyl sulfate (SDS) were used as catalyst support to deposit platinum nanoparticles. High resolution transmission electron microscopy (HRTEM) images reveal the crystalline nature of Pt nanoparticles with a diameter of ∼4 nm on the surface of MWCNTs. A single proton exchange membrane fuel cell (PEMFC) with total catalyst loading of 0.2 mg Pt cm⁻² (anode 0.1 and cathode 0.1 mg Pt cm⁻², respectively) has been evaluated at 80 °C with H₂ and O₂ gases using Nafion-212 electrolyte. Pt/MWCNTs synthesized by using modified SDS-MWCNTs with high temperature treatment (250 °C) showed a peak power density of 950 mW cm⁻². Accelerated durability evaluation was carried out by conducting 1500 potential cycles between 0.1 and 1.2 V with 50 mV s⁻¹ scan rate, H₂/N₂ at 80 °C. The membrane electrode assembly (MEA) with Pt/MWCNTs showed superior performance stability with a power density degradation of only ∼30% compared to commercial Pt/C (70%) after potential cycles.     

Dispersions of carbon nanotubes in sulfonated poly[bis(benzimidazobenzisoquinolinones)] and their proton-conducting composite membranes

A sulfonated poly[bis(benzimidazobenzisoquinolinones)] (SPBIBI) possessing a conjugated pyridinone ring was shown to be effective for dispersing multiwalled carbon nanotubes (MWCNTs) in DMSO. The dispersions in which the SPBIBI to MWCNTs mass ratio was 4:1 demonstrated the highest MWCNTs concentrations, i.e., 1.5-2.0 mg mL⁻¹, and were found to be stable for more than six months at room temperature. Through casting of these dispersions, MWCNTs/SPBIBI composite membranes were successfully fabricated on substrates as proton exchange membranes for fuel cell applications and showed no signs of macroscopic aggregation. The properties of composite membranes were investigated, and it was found that the homogeneous dispersion of the MWCNTs in the SPBIBI matrix altered the morphology structures of the composite membranes, which lead to the formation of more regular and smaller cluster-like ion domains. As a result, and in comparison to a pristine SPBIBI membrane, the composite membranes displayed more significant proton conductivities, especially at low relative humidity, without sacrificing other excellent properties, such as thermal, dimensional and oxidative stabilities. For instance, the composite membranes with an MWCNTs content only of 0.5 wt% exhibited proton conductivities of 0.021 S cm⁻¹ at 50 RH% and 70 °C, a value almost fourfold as high as that of the pristine SPBIBI membranes under identical conditions (0.005 S cm⁻¹). The result was comparable to Nafion 117 (0.021 S cm⁻¹). The homogenous dispersion of the MWCNTs and the efficient enhancement the SPBIBI performance were attributed to the π-π interaction between the pyridinone ring and the sidewalls of the MWCNTs which changed the morphological structure of composite membranes as revealed by TEM. A combination of a low methanol crossover with excellent thermo-oxidative and water stabilities indicated that the SPBIBI composite membranes were good candidate materials for proton exchange membranes in fuel cell applications.     

Enhanced electrochemical performances of LiNi0.5Mn1.5O4 spinel via ethylene glycol-assisted synthesis

A simple and effective method, ethylene glycol-assisted co-precipitation method, has been employed to synthesize LiNi_0.5Mn_1.5O₄ spinel. As a chelating agent, ethylene glycol can realize the homogenous distributions of metal ions at the atomic scale and prevent the growth of LiNi_0.5Mn_1.5O₄ particles. XRD reveals that the prepared material is a pure-phase cubic spinel structure (Fd3m) without any impurities. SEM images show that it has an agglomerate structure with the primary particle size of less than 100 nm. Electrochemical tests demonstrate that the as-prepared LiNi_0.5Mn_1.5O₄ possesses high capacity and excellent rate capability. At 0.1 C rate, it shows a discharge capacity of 137 mAh g⁻¹ which is about 93.4% of the theoretical capacity (146.7 mAh g⁻¹). At the high rate of 5 C, it can still deliver a discharge capacity of 117 mAh g⁻¹ with excellent capacity retention rate of more than 95% after 50 cycles. These results show that the as-prepared LiNi_0.5Mn_1.5O₄ is a promising cathode material for high power Li-ion batteries.     

Preparation of an electrochemically modified graphite electrode and its electrochemical performance for pseudo-capacitors in a sulfuric acid electrolyte

A graphite electrode was activated using recurrent electrochemical galvanic pulses. After activation, the original smooth surface was changed into an obviously porous, rough surface with microcrystalline flake structures with a larger number of O-containing functional groups. The material had a high capacitance and a satisfactory high-rate performance. The superior volumetric capacitance in active layer was ca. 428 F cm⁻³. Eighty-eight percentage of the capacitance remained after the discharge current increased from 2 mA (1.71 F cm⁻²) to 100 mA (1.50 F cm⁻²) in 2.3 M H₂SO₄.     

Synthesis and characterization of high-density non-spherical Li(Ni1/3Co1/3Mn1/3)O2 cathode material for lithium ion batteries by two-step drying method

Non-spherical Li(Ni_1/3Co_1/3Mn_1/3)O₂ powders have been synthesized using a two-step drying method with 5% excess LiOH at 800 °C for 20 h. The tap-density of the powder obtained is 2.95 g cm⁻³. This value is remarkably higher than that of the Li(Ni_1/3Co_1/3Mn_1/3)O₂ powders obtained by other methods, which range from 1.50 g cm⁻³ to 2.40 g cm⁻³. The precursor and Li(Ni_1/3Co_1/3Mn_1/3)O₂ are characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and scanning electron microscope (SEM). XPS studies show that the predominant oxidation states of Ni, Co and Mn in the precursor are 2⁺, 3⁺ and 4⁺, respectively. XRD results show that the Li(Ni_1/3Co_1/3Mn_1/3)O₂ material obtained by the two-step drying method has a well-layered structure with a small amount of cation mixing. SEM confirms that the Li(Ni_1/3Co_1/3Mn_1/3)O₂ particles obtained by this method are uniform. The initial discharge capacity of 167 mAh g⁻¹ is obtained between 3 V and 4.3 V at a current of 0.2 C rate. The capacity of 159 mAh g⁻¹ is retained at the end of 30 charge-discharge cycle with a capacity retention of 95%.     

LiNi0.8Co0.15Al0.05O2 cathode materials prepared by TiO2 nanoparticle coatings on Ni0.8Co0.15Al0.05(OH)2 precursors

Synthesis, electrochemical, and structural properties of LiNi_0.8Co_0.15Al_0.05O₂ cathodes prepared by TiO₂ nanoparticles coating on a Ni_0.8Co_0.15Al_0.05(OH)₂ precursor have been investigated by the variation of coating concentration and annealing temperature. TiO₂-coated cathodes showed that Ti elements were distributed throughout the particles. Among the coated cathodes, the 0.6 wt% TiO₂-coated cathode prepared by annealing at 750 °C for 20 h exhibited the highest reversible capacity of 176 mAh g⁻¹ and capacity retention of 92% after 40 cycles at a rate of 1C (=190 mA g⁻¹). On the other hand, an uncoated cathode showed a reversible first discharge capacity of 186 mAh g⁻¹ and the same capacity retention value to the TiO₂-coated sample at a 1C rate. However, under a 1C rate cycling at 60 °C for 30 cycles, the uncoated sample showed a reversible capacity of 40 mAh g⁻¹, while a TiO₂-coated one showed 71 mAh g⁻¹. This significant improvement of the coated sample was due to the formation of a possible solid solution between TiO₂ and LiNi_0.8Co_0.15Al_0.05O₂. This effect was more evident upon annealing the charged sample while increasing the annealing temperature, and at 400 °C, the coated one showed a more suppressed formation of the NiO phase from the spinel LiNi₂O₄ phase than the uncoated sample.     

An optimized Ni doped LiFePO4/C nanocomposite with excellent rate performance

Both Ni doping and carbon coating are adopted to synthesize a nano-sized LiFePO₄ cathode material through a simple solid-state reaction. It is found that the Ni²⁺ has been successfully doped into LiFePO₄ without affecting the phospho-olivine structure from the XRD result. The images of SEM and TEM show that the size of particles is distributed in the range of 20-60 nm, and all the particles are coated with carbon completely. The results of XPS show the valence state of Fe and Ni in the LiFePO₄. The electronic conductivity of the material is as high as 2.1 × 10⁻¹ S cm⁻¹, which should be ascribed to the coefficient of the conductive carbon network and Ni doping. As a cathode material for lithium-ion batteries, the Ni doped LiFePO₄/C nanocomposite delivers a discharge capacity of 170 mAh g⁻¹ at 0.2 C, approaching the theoretical value. Moreover, the material shows excellent high-rate charge and discharge capability and long-term cyclability. At the high rates of 10 and 15 C, this material exhibits high capacities of 150 and 130 mAh g⁻¹, retaining 95% after 5500 cycles and 93% after 7200 cycles, respectively. Therefore, the as-prepared material is capable of such large-scale applications as electric vehicles and plug-in hybrid electric vehicles.