共查询到20条相似文献,搜索用时 0 毫秒
1.
Xuejie Sun 《Electrochimica acta》2006,52(2):427-433
A new method for the fabrication of a planar silver/silver chloride reference electrode for electrochemical detection is described. The film microelectrode was directly fabricated on the surface of a glass slide through a combination of electroless deposition and electroplating. Thickness of the electrode film could be easily controlled by setting the repetition times of the deposition. The whole process can be operated in ordinary chemistry laboratory at a low cost, which makes it possible for the development of disposable devices. The electrode potential showed extreme stability in 3 mol/L KCl and water during the tested period of 14 and 10 days, respectively. pH does not have a significant effect on the performance of the electrode. In both potentiometric and amperometric applications, the film Ag/AgCl electrode demonstrated to be a good reference for electroanalysis with its performance comparable to that of commercial reference electrode and the electrodes fabricated from different batches showed good reproducibility. 相似文献
2.
Thiago R.L.C. Paixão 《Electrochimica acta》2007,52(5):2181-2188
The electrocatalytic oxidation of deoxyguanosine on a ruthenium hexacyanoferrate (RuOHCF) glassy carbon (GC) modified electrode was investigated in acid medium by using rotating disc electrode (RDE) voltammetry. Chronoamperometric experiments allowed information on the charge transport rate through the RuOHCF film and at a very short time window a diffusion-like behavior was observed with a Dct value of 2.7 × 10−11 cm2 s−1 for a film with Γ = 4.47 × 10−9 mol cm−2. The influence of systematic variation of rotation rate, film thickness and the electrode potential indicates that the rate of cross-chemical reaction between Ru(IV) centers immobilized into the film and deoxyguanosine controls the overall electrodic process and the value of the rate constant was found to be 3.2 × 106 mol−1 L1 s−1. The relatively high rate constant of the cross-reaction, the facile penetration of the substrate through the film and the fast transport of electrons suggest that the electrocatalytic process occurs throughout the film layer. 相似文献
3.
A promising electrochemical sensor was developed based on a layer by layer process by electro-polymerization of pyrrole in the presence of new coccine (NC) as dopant anion on the surface of the multi-walled carbon nanotubes (MWCNTs) pre-coated glassy carbon electrode (GCE). The modified electrode was used as a new and sensitive electrochemical sensor for voltammetric determination of sumatriptan (SUM). The electrochemical behavior of SUM was investigated on the surface of the modified electrode using linear sweep voltammetry (LSV). The results showed a remarkable increase (∼12 times) in the anodic peak current of SUM in comparison to the bare GCE. The effect of experimental variables such as, drop size of the casted MWCNTs suspension, pH of the supporting electrolyte, accumulation conditions and the number of cycles in the electro-polymerization process on the electrode response was investigated. Under the optimum conditions, the modified electrode showed a wide linear dynamic range of 0.02–10.0 μmol L−1 with a detection limit of 6 nmol L−1 for the voltammetric determination of SUM. The prepared electrode showed high sensitivity, stability and good reproducibility in response to SUM. This sensor was successfully applied for the accurate determination of trace amounts of SUM in pharmaceutical and clinical preparations. 相似文献
4.
Jinlei Zhang Dandan Zhao Shengwei Tan Zenwei Huang Yan Mi Zaiyin Huang 《Electrochimica acta》2010,55(7):2522-2526
A new method for the determination of nimesulide was established based on the multiwalled carbon nanotubes (MWCNTs) modified glassy carbon electrode (MWCNTs/GCE). In 0.2 M PBS (pH 6.6) buffer solution, the MWCNTs/GCE showed a remarkable catalytic and enhancement effect on reduction of the nimesulide. The reduction peak potential of nimesulide shifted positively from −0.665 V at bare GCE to −0.553 V at MWCNTs/GCE, and the sensitivity increased ca. 7 times. A linear dynamic range of 3.2 × 10−7-6.5 × 10−5 M (R = 0.9992) with a detection limit of 1.6 × 10−7 M was obtained. The electrochemical behaviors of nimesulide were studied and electron-transfer coefficient (α = 0.45), proton number (X = 1) and electron-transfer number (n = 2) have been determined. This method has been used to determine the content of nimesulide in medical tablets. The recovery was determined to be 93.2-106.2% by means of standard addition method. Compared with UV-vis spectrometry, the method was not remarkable difference. 相似文献
5.
Karla Calfumán Maria Jesús Aguirre Paulina Cañete-Rosales Soledad Bollo Rosa Llusar Mauricio Isaacs 《Electrochimica acta》2011,56(24):8484
This paper describes the electrochemical reduction of nitrite ion in neutral aqueous solution mediated by tetraruthenated metalloporphyrins (Co(II), Ni(II) and Zn(II)) electrostatically assembled onto a Nafion film previously adsorbed on glassy carbon or ITO electrodes. Scanning electron microscope (SEM-EDX) and transmission electron microscopy (TEM) results have shown that on ITO electrodes the macrocycles forms multiple layers with a disordered stacking orientation over the Nafion film occupying hydrophobic and hydrophilic sites in the polyelectrolyte. Atomic force microscopy (AFM) results demonstrated that the Nafion film is 35 nm thick and tetraruthenated metalloporphyrins layers 190 nm thick presenting a thin but compacted morphology. Scanning electrochemical microscopy (SECM) images shows that the Co(II) tetraruthenated porphyrins/Nf/GC modified electrode is more electrochemically active than their Ni and Zn analogues.These modified electrodes are able to reduce nitrite at −660 mV showing enhanced reduction current and a decrease in the required overpotential compared to bare glassy carbon electrode. Controlled potential electrolysis experiments verify the production of ammonia, hydrazine and hydroxylamine at potentials where reduction of solvent is plausible demonstrating some selectivity toward the nitrite ion. Rotating disc electrode voltammetry shows that the factor that governs the kinetics of nitrite reduction is the charge propagation in the film. 相似文献
6.
Mohammad Mazloum Ardakani Payam Ebrahimi karami Hamid Reza Zare 《Electrochimica acta》2007,52(20):6118-6124
The electrocatalytic oxidation of hydrazine has been studied on glassy carbon modified by electrodeposition of quinizarine, using cyclic voltammetry and chronoamperometry techniques. It has been shown that the oxidation of hydrazine to nitrogen occurs at a potential where oxidation is not observed at the bare glassy carbon electrode. The apparent charge transfer rate constant and transfer coefficient for electron transfer between the electrode surface and immobilized quinizarine were calculated as 4.44 s−1 and 0.66, respectively. The heterogenous rate constant for oxidation of hydrazine at the quinizarine modified electrode surface was also determined and found to be about 4.83 × 103 M−1 s−1. The diffusion coefficient of hydrazine was also estimated as 1.1 × 10−6 cm2 s−1 for the experimental conditions, using chronoamperometry. 相似文献
7.
A glassy carbon electrode modified with CeO2 nanoparticles was constructed and was characterized by electrochemical impedance spectrum (EIS) and cyclic voltammetry (CV). The resulting CeO2 nanoparticles modified glassy carbon electrode (CeO2 NP/GC electrode) was used to detect uric acid (UA) and ascorbic acid (AA) simultaneously in mixture. This modified electrode exhibits potent and persistent electron-mediating behavior followed by well-separated oxidation peaks towards UA and AA with activation overpotential. For UA and AA in mixture, one can well separate from the other with a potential difference of 273 mV, which was large enough to allow the determination of one in presence of the other. The DPV peak currents obtained in mixture increased linearly on the UA and AA in the range of 5.0 × 10−6 to 1.0 × 10−3 mol/L and 1.0 × 10−6 to 5.0 × 10−4 mol/L, with the detection limit (signal-to-noise ratio was 3) for UA and AA were 2.0 × 10−7 and 5.0 × 10−6 mol/L, respectively. The proposed method showed excellent selectivity and stability, and the determination of UA and AA simultaneously in serum was satisfactory. 相似文献
8.
Ahmad Nozad Golikand Mehdi Asgari Mohammad Ghannadi Maragheh Elaheh Lohrasbi 《Journal of Applied Electrochemistry》2009,39(1):65-70
A multi-wall carbon nanotube (MWNT) modified glassy carbon electrode (GCE) is described for the measurement of trace levels
of uranium by anodic stripping voltammetry. In a pH 4.4 NaAc-Hac buffer containing 0.010 mol L−1 Mg(NO3)2, UO2
2+ was adsorbed onto the surface of a MWNT film coated glassy carbon electrode and then reduced at −0.40 V vs. Ag/AgCl. During
the positive potential sweep the reduced uranium was oxidized and a well-defined stripping peak appeared at +0.20 V vs. Ag/AgCl.
Low concentrations of Mg2+ significantly enhanced the stripping peak currents since they induced UO2
2+ to adsorb at the electrode surface. The response was linear up to 1.2 × 10−7 mol L−1 and the relative standard deviation at 2.0 × 10−8 mol L−1 uranium was 5.2%. Potential interferences were examined. The attractive behavior of the new “mercury-free” uranium sensor
holds promise for on-site environmental and industrial monitoring of uranium. 相似文献
9.
A glassy carbon (GC) electrode surface was modified with a cadmium pentacyanonitrosylferrate (CdPCNF) film as a novel electrode material. The modification procedure of the GC surface includes two consecutive procedures: (i) the electrodeposition of metallic cadmium on the GC electrode surface from a CdCl2 solution and (ii) the chemical transformation of the deposited cadmium to the CdPCNF films in 0.05 M Na2[Fe(CN)5NO] + 0.5 M KNO3 solution. The modified GC electrode showed a well-defined redox couple due to [CdIIFeIII/II(CN)5NO]0/−1 system. The effects of supporting electrolytes and solution pH were studied on the electrochemical behavior of the modified electrode. The diffusion coefficients of alkali-metal cations in the film (D), the transfer coefficient (α) and the charge transfer rate constant at the modifying film | electrode interface (ks), were calculated in the presence of various alkali-metal cations. The stability of the modified electrode was investigated under various experimental conditions. 相似文献
10.
Bismuth-powder modified carbon paste electrode (Bi-CPE) is presented as an attractive “mercury-free” sensor applicable in electrochemical striping analysis of selected heavy metals. The electrode paste was prepared as a mixture of finely powdered metallic bismuth together with graphite powder and silicon oil. The Bi-CPE was characterized in nondeaerated solutions containing Cd(II) and Pb(II) at the μg/L level in conjunction with square-wave anodic stripping voltammetry. The electrode exhibited well-defined and separated stripping signals for both metals accompanied with a low background contribution, and a reproducibility of 5.6 and 6.0% (n = 12) for 20 μg/L Cd(II) and Pb(II), respectively. The Bi-CPE exhibited superior performance in comparison to the bare carbon paste electrode (CPE) and the bismuth paste electrode (BiPE) and surprisingly, yielded a higher response than the in situ prepared bismuth-film carbon paste electrode. The electrode displayed excellent linear behavior in the examined concentration range from 10 to 100 μg/L Cd(II) + Pb(II) (R2 = 0.998 for both), with limits of detection of 1.2 μg/L for Cd(II) and 0.9 μg/L for Pb(II). The electroanalytical performance of Bi-CPE was successfully tested in a real sample of tap water spiked with Cd(II) and Pb(II). 相似文献
11.
A carbon nanotube/Nafion composite film modified electrode is described for the sensitive and convenient determination of
Pb2+. In the presence of 1% Nafion, multi-walled carbon nanotubes (MWNT) were successfully dispersed into ethanol by ultrasonication.
After evaporating the ethanol, a MWNT/Nafion composite film-modified electrode was achieved. The resulting MWNT/Nafion film
modified electrode possesses high cation exchange capacity, large surface area, strong adsorption ability and catalytic activity.
Compared with the unmodified electrode and Nafion film-modified electrode, the MWNT/Nafion film-modified electrode remarkably
increases the stripping peak current of Pb2+. Furthermore, the influences of supporting electrolyte, volume of MWNT/Nafion suspension, accumulation potential and accumulation
time were investigated. The striping peak current of Pb2+ is proportional to its concentration over the range 8.0 × 10−8 to 6.0 × 10−6 mol L−1. The limit of detection (S/N = 3) is as low as 5.0 × 10−9 mol L−1. Finally, this newly developed method was used to determine Pb2+ in water samples. 相似文献
12.
A sensitive and selective electrochemical sensor was fabricated via the drop-casting of carbon nanoparticles (CNPs) suspension onto a glassy carbon electrode (GCE). The application of this sensor was investigated in simultaneous determination of acetaminophen (ACE) and tramadol (TRA) drugs in pharmaceutical dosage form and ACE determination in human plasma. In order to study the electrochemical behaviors of the drugs, cyclic and differential pulse voltammetric studies of ACE and TRA were carried out at the surfaces of the modified GCE (MGCE) and the bare GCE. The dependence of peak currents and potentials on pH, concentration and the potential scan rate were investigated for these compounds at the surface of MGCE. Atomic force microscopy (AFM) was used for the characterization of the film modifier and its morphology on the surface of GCE. The results of the electrochemical investigations showed that CNPs, via a thin layer model based on the diffusion within a porous layer, enhanced the electroactive surface area and caused a remarkable increase in the peak currents. The thin layer of the modifier showed a catalytic effect and accelerated the rate of the electron transfer process. Application of the MGCE resulted in a sensitivity enhancement and a considerable decrease in the anodic overpotential, leading to negative shifts in peak potentials. An optimum electrochemical response was obtained for the sensor in the buffered solution of pH 7.0 and using 2 μL CNPs suspension cast on the surface of GCE. Using differential pulse voltammetry, the prepared sensor showed good sensitivity and selectivity for the determination of ACE and TRA in wide linear ranges of 0.1-100 and 10-1000 μM, respectively. The resulted detection limits for ACE and TRA was 0.05 and 1 μM, respectively. The CNPs modified GCE was successfully applied for ACE and TRA determinations in pharmaceutical dosage forms and also for the determination of ACE in human plasma. 相似文献
13.
A nitrate-selective electrode based on surfactant-modified zeolite (SMZ) particles into carbon paste was proposed (SMZ-CPE). The electrode was fully characterized in terms of composition, response time, ionic strength, thermal stability and usable pH range. The electrode containing 10% SMZ exhibited linear response range to nitrate species in the range of 1.00 × 10−6 to 1.00 × 10−3 M with a detection limit of 1.00 × 10−6 M and a Nernstian slope of 59.4 ± 0.7 mV per decade of nitrate concentration. The response of the electrode to nitrate remains constant in the pH ranges of 3.5–9.8 and 1.7–10.5 for 1.00 × 10−4 and 1.00 × 10−2 M nitrate, respectively, and in presence of 1 × 10−4 to 1 × 10−3 M NaCl. The response of the electrode reaches to its equilibrium value within several seconds (10 s) after immersing the electrode in nitrate solution. Selectivity coefficients showed multivalent anions (such as arsenate, dichromate and sulfate) have higher interferences than monovalent anions (such as iodide, fluoride, bromide, chloride and thiocyanate). The electrode was used for determination of nitrate in an ammonium nitrate fertilizer sample, using direct potentiometry, and the satisfactory results were obtained. The electrode was also used for the potentiometric titration of nitrate. The validation of the obtained results in each case was proved by statistical “t” and “g” tests. 相似文献
14.
A novel modified glassy carbon electrode with a film of nanodiamond-graphite/chitosan is constructed and used for the sensitive voltammetric determination of azathioprine (Aza). The surface morphology and thickness of the film modifier are characterized using atomic force microscopy. The electrochemical response characteristics of the electrode toward Aza are investigated by means of cyclic voltammetry. The modified electrode showed an efficient catalytic role for the electrochemical reduction of Aza, leading to a remarkable decrease in reduction overpotential and enhancement of the kinetics of the electrode reaction with a significant increase of peak current. The effects of experimental variables, such as the deposited amount of modifier suspension, the pH of the supporting electrolyte, the accumulation potential and time were investigated. Under optimal conditions, the modified electrode showed a wide linear response to the concentration of Aza in the range of 0.2-100 μM with a detection limit of 65 nM. The prepared modified electrode showed several advantages: simple preparation method, high stability and uniformity in the composite film, high sensitivity, excellent catalytic activity in physiological conditions and good reproducibility. The modified electrode can be successfully applied to the accurate determination of trace amounts of Aza in pharmaceutical and clinical preparations. 相似文献
15.
A novel technique is utilized to detect trace amounts of phloroglucinol. In pH 5.0, 0.1 mol L−1 HAc–NaAc buffer solution, phloroglucinol exhibited a stable and sensitive oxidation signal at a glassy carbon electrode modified
with multi-wall carbon nanotube. By using the surfactant cetyl pyridinium chloride, the electrochemical response was greatly
enhanced. The mechanism was systematically explored. In the range 9.0 × 10−7–3.0 × 10−4 mol L−1, the oxidation peak currents of phloroglucinol have a linear relationship with concentration: the limit of detection was
estimated to be 2.5 × 10−7 mol L−1 (S/N = 3). The method was adopted to detect the content of phloroglucinol injection, and the recovery was from 97.5% to 103.0%. 相似文献
16.
Electrochemical determination of bromide at a multiwall carbon nanotubes-chitosan modified electrode
A multiwall carbon nanotubes (MWNTs)-chitosan modified glassy carbon electrode (GCE) exhibits attractive ability for highly sensitive cathodic stripping voltammetric measurements of bromide (Br−). In pH 1.8 H2SO4 solution, a substantial increase in the stripping peak current of Br− (compared to bare GCE and chitosan modified GCE) is observed using MWNTs-chitosan modified electrode. Operational parameters were optimized and the electrochemical behaviors of Br− were studied by different electrochemical methods. The kinetics parameters were measured, the number of electron transfer (n) was 1 and the transfer coefficient (α) is 0.17. A wide linear calibration range (3.6 × 10−7-1.4 × 10−5 g mL−1) was achieved, with a detection limit of 9.6 × 10−8 g mL−1. The mechanism of electrode reaction was fully discussed. 相似文献
17.
Cuihong Zhang 《Electrochimica acta》2010,55(8):2835-137
A novel route (electrodeposition) for the fabrication of porous ZnO nanofilms attached multi-walled carbon nanotubes (MWCNTs) modified glassy carbon electrodes (GCEs) was proposed. The morphological characterization of ZnO/MWCNT films was examined by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). The performances of the ZnO/MWCNTs/GCE were characterized with cyclic voltammetry (CV), Nyquist plot (EIS) and typical amperometric response (i-t). The potential utility of electrodes constructed was demonstrated by applying them to the analytical determination of hydroxylamine concentration. An optimized limit of detection of 0.12 μM was obtained at a signal-to-noise ratio of 3 and with a fast response time (within 3 s). Additionally, the ZnO/MWCNTs/GCE exhibited a wide linear range from 0.4 to 1.9 × 104 μM and higher sensitivity. The ease of fabrication, high stability, and low cost of the modified electrode are the promising features of the proposed sensor. 相似文献
18.
A novel ECR-modified electrode is fabricated by electrodeposition of Eriochrome Cyanine R (ECR) at a glassy carbon (GC) electrode by cyclic voltammetry (CV) in double-distilled water. The characterization of the ECR film modified electrode is carried out by atomic force microscopy (AFM), infrared spectra (IR), spectroelectrochemistry and cyclic voltammetry. The results show that a slightly heterogeneous film formed on the surface of the modified electrode, and the calculated surface concentration of ECR is 2 × 10−10 mol/cm−2. The ECR film modified GC electrode shows excellent electrocatalytic activities toward the oxidation of serotonin (5-HT) and norepinephrine (NE). Furthermore, the modified electrode can separately detect 5-HT and NE, even in the presence of 200-fold concentration of ascorbic acid (AA) and 25-fold concentration of uric acid (UA). Using differential pulse voltammetry (DPV), the peak currents of 5-HT and NE recorded in pH 7 solution are linearly dependent on their concentrations in the range of 0.05-5 μM and 2-50 μM, respectively. The limits of detection are 0.05 and 1.5 μM for 5-HT and NE, respectively. The ECR film modified electrode can be stored stable for at least 1 week in 0.05 M PBS (pH 7) at 4 °C in a refrigerator. Owing to its excellent selectivity and sensitivity, the modified electrode could provide a promising tool for the simultaneous determination of 5-HT and NE in complex biosamples. 相似文献
19.
Novel inorganic film modified electrodes have been prepared by chemical deposition of a thin palladium pentacyanonitrosylferrate (PdPCNF) film on the surface of aluminum substrate. The modification process including the electroless deposition of metallic palladium on the aluminum electrode surface from PdCl2+25% ammonia solution and chemical derivatization of deposited palladium to the PdPCNF film in 0.1 M Na2[Fe(CN)5NO]+0.5 M KNO3+HNO3 solution (pH 1.5-2.5), are described. The aluminum-based modified electrodes exhibit, one pair of well-defined voltammetric peaks which correspond to the Fe(III)/Fe(II) transition in complex structure. The effect of pH, ammonium, alkali metal and alkaline earth metal cations of supporting electrolyte on the electrochemical characteristics of the modified electrode was studied in detail. Diffusion coefficients of hydrated ammonium and alkali metal cations in the film (D), transfer coefficient (α) and transfer rate constant for electron (ks), were determined. The high stability of this modified electrode makes it attractive in practical application. 相似文献
20.
We report synthesis of colloids with polymer core and inorganic shell consisting of silver nanoparticles (AgNPs) which can be used as building blocks for the preparation of conducting composite films. Polymer colloids based on copolymer of styrene and butyl acrylate with variable film formation temperature and functional surface have been prepared by surfactant-free emulsion polymerization. Polymer particles with average size between 140 nm and 220 nm and narrow size distribution were used as templates for deposition of AgNPs by microwave-assisted reduction of silver precursors in aqueous medium. The loading of the AgNPs on the polymer particle surface has been increased up to 60 wt.-%. Obtained hybrid colloids were used for preparation of composite films. The electrical conductivity of the composite films starts to increase if the AgNPs loading on the polymer particle surface is above 20 wt.-%. 相似文献