A comparison of the electrocatalytic activities of ordered mesoporous carbons treated with either HNO3 or NaOH

Ordered mesoporous carbon (OMC) was treated with HNO₃ or NaOH. The two treated OMCs have many oxygen-containing functional groups. Those treated with HNO₃ have more acidic surface groups than those treated with NaOH. Nicotinamide adenine dinucleotide (NADH) and H₂O₂ were selected as marker molecules for the comparison of the electrocatalytic property of the OMCs. A comparison between the cyclic voltammograms shows that the oxidation peak potential of NADH is 0.614 V at a bare glassy carbon electrode (GCE), 0.205 V at OMC/GCE, 0.223 V at NaOH-treated OMC/GCE, and 0.0 V at HNO₃-treated OMC/GCE (vs. Ag/AgCl). The results indicate that the HNO₃-treated OMC/GCE exhibits the highest electrocatalytic activity for NADH oxidation. Thus, acidic groups rather than other oxygen-containing functional groups, play a very important role in the catalytic activity of OMC.     

Glassy carbon electrode modified with Nafion-Au colloids for clenbuterol electroanalysis

Stable Nafion-Au colloids were immobilized on a glassy carbon electrode (GCE) for detection of β-agonist clenbuterol by electroanalysis. The Au colloids were prepared by a one-step electrodeposition onto GCE, with obvious electrocatalytic activity present. The negatively charged Nafion film was an efficient barrier to negatively charged interfering compounds, resulting in accumulation of positively charged clenbuterol at the Nafion film. The electrochemical characters of the electrode during various modified steps in a redox probe system of K₄[Fe(CN)₆]/K₃[Fe(CN)₆] were confirmed by cyclic voltammetry (CV) and AC-impedance. In Britton-Robinson (B-R) buffer solution (pH = 2.0) and the potential range of −0.2 to 1.2 V, the Nafion-Au colloid modified electrode, compared to a bare GCE, exhibits obvious electrocatalytic activity towards the redox of clenbuterol by greatly enhancing the peak current with a linear calibration curve from 8.0 × 10⁻⁷ to 1.0 × 10⁻⁵ mol/L and a detection limit of (1.0 × 10⁻⁷ mol/L) (R = 0.996). The modified electrode shows high sensitivity, selectivity and reproducibility. The recovery for detecting clenbuterol (∼10⁻⁶ mol/L) in human serum is up to 98.19%.     

The ultrasonic electropolymerization of an 5-[o-(4-bromine amyloxy)phenyl]-10,15,20-triphenylporphrin (o-BrPETPP) film electrode and its electrocatalytic properties to dopamine oxidation in aqueous solution

5-[o-(4-Bromine amyloxy)phenyl]-10,15,20-triphenylporphrin (o-BrPETPP) was electropolymerized on a glassy carbon electrode (GCE), and the electrocatalytic properties of the prepared film electrode response to dopamine (DA) oxidation were investigated. A stable o-BrPETPP film was formed on the GCE under ultrasonic irradiation through a potentiodynamic process in 0.1 M H₂SO₄ between −1.1 V and 2.2 V versus a saturated calomel electrode (SCE) at a scan rate of 0.1 V s⁻¹. The film electrode showed high selectivity for DA in the presence of ascorbic acid (AA) and uric acid (UA), and a 6-fold greater sensitivity to DA than that of the bare GCE. In the 0.05 mol L⁻¹ phosphate buffer (pH 6.0), there was a linear relationship between the oxidation current and the concentration of DA solution in the range of 5 × 10⁻⁷ mol L⁻¹ to 3 × 10⁻⁵ mol L⁻¹. The electrode had a detection limit of 6.0 × 10⁻⁸ mol L⁻¹(S/N = 3) when the differential pulse voltammetric (DPV) method was used. In addition, the charge transfer rate constant k = 0.0703 cm s⁻¹, the transfer coefficient α = 0.709, the electron number involved in the rate determining step n_α = 0.952, and the diffusion coefficient D_o = 3.54  10⁻⁵ cm² s⁻¹ were determined. The o-BrPETPP film electrode provides high stability, sensitivity, and selectivity for DA oxidation.     

Electrocatalytic oxidation of ascorbic acid by [Fe(CN)6] redox couple electrostatically trapped in cationic N,N-dimethylaniline polymer film electropolymerized on diamond electrode

Multinegatively charged metal complex, hexacyanoferrate ([Fe(CN)₆]⁴⁻), was electrostatically trapped in the cationic polymer film of N,N-dimethylaniline (PDMA) which was electrochemically deposited on the boron-doped diamond (BDD) electrode by controlled-potential electro-oxidation of the monomer. This ferrocyanide-trapped PDMA film was used to catalyze the oxidation of ascorbic acid (AA). Increase in the oxidation current response with a negative shift of the anodic peak potential was observed at the cationic PDMA film-coated BDD (PDMA|BDD) electrode, compared with that at the bare BDD electrode. A more drastic enhancement in the oxidation peak current as well as more negative shift of oxidation potential was found at the ferrocyanide-trapped PDMA film-coated BDD ([Fe(CN)₆]^3−/4−|PDMA|BDD) electrode. This [Fe(CN)₆]^3−/4−|PDMA|BDD electrode can be used as an amperometric sensor of AA. Ferrocyanide, electrostatically trapped in the polymer film shows more electrocatalytic activity than that coordinatively attached to the polymer film or dissolved in the solution phase. The electrocatalytic current depends on the surface coverage of ferricyanide, Γ_Fe, within the polymer film. Diffusion coefficient (D) of AA in the solution was estimated by rotating disk electrode voltammetry: D = (5.8 ± 0.3) × 10⁻⁶ cm² s⁻¹. The second-order rate constant for the catalytic oxidation of AA by ferricyanide was also estimated to be 9.0 × 10⁴ M⁻¹ s⁻¹. In the hydrodynamic amperometry using the [Fe(CN)₆]^3−/4−|PDMA|BDD electrode, a successive addition of 1 μM AA caused the successive increase in current response with equal amplitude and the sensitivity was calculated as 0.233 μA cm⁻² μM⁻¹.     

An unusual H2O2 electrochemical sensor based on Ni(OH)2 nanoplates grown on Cu substrate

In this work, Ni(OH)₂ nanoplates grown on the Cu substrate were synthesized and characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Then a novel Cu-Ni(OH)₂ modified glass carbon electrode (Cu-Ni(OH)₂/GCE) was fabricated and evaluated by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and typical amperometric response (i-t) method. Exhilaratingly, the Cu-Ni(OH)₂/GCE shows significant electrocatalytic activity toward the reduction of H₂O₂. At an applied potential of −0.1 V, the sensor produces an ultrahigh sensitivity of 408.1 μA mM⁻¹ with a low detection limit of 1.5 μM (S/N = 3). The response time of the proposed electrode was less than 5 s. What's more, the proposed sensor displays excellent selectivity, good stability, and satisfying repeatability.     

Electrochemical study on cobalt film modified glassy carbon electrode and its application

A novel electroactive material for ascorbic acid (AA) determination was successfully prepared by plating/potential cycling method. The cobalt film was first deposited on the surface of glassy carbon electrode (GCE) in CoSO₄ solution by potential cycling, and then a cobalt film on the surface of GCE was activated by potential cycling in 0.1 mol L⁻¹ NaOH. The electrochemical performance of the resulted film (Co/GCE) and factors affecting its electrochemical activity were investigated by cyclic voltammetry and amperometry. This film electrode exhibited good electrocatalytic activity to the oxidation of AA. This biosensor had a fast response of AA less than 3 s and excellent linear relationships were obtained in the concentration range of 3 × 10⁻⁷ to 1 × 10⁻⁴ mol L⁻¹ with a detection limit of 2 × 10⁻⁷ mol L⁻¹ (S/N = 3) under the optimum conditions. Moreover, the selectivity, stability and reproducibility of this biosensor were evaluated with satisfactory results.     

Electrochemical synthesis of belt-like polyaniline network on p-phenylenediamine functionalized glassy carbon electrode and its use for the direct electrochemistry of horse heart cytochrome c

Three-dimension (3D) belt-like polyaniline (PAN) network has been prepared via electrochemical polymerization of aniline on p-phenylenediamine (PDA) functionalized glassy carbon electrode (GCE) using a three-step electrochemical deposition procedure. PDA was covalently binded on GCE via the formation of carbon-nitrogen bond between amine cation radical and the aromatic moiety of GCE surface using electrochemical oxidation procedure. X-ray photo-electron spectroscopy (XPS) and cyclic voltammetry have been performed to characterize the attachment of PDA on GCE. The images of scanning electron microscope (SEM) show that the 3D belt-like PAN network is uniform. The width and thickness of the PAN belt varies in the range of 1.5-5.5 μm and 0.1-0.8 μm, respectively. The distance between the belt-contacts ranges from 2.5 to 15 μm. The 3D belt-like PAN network modified GCE (PAN-PDA/GCE) exhibits an improved electro-activity of PAN at an extended pH up to 7.0. The PAN-PDA/GCE not only immobilizes but also leads to a direct electrochemical behavior of cytochrome c (Cyt c). The immobilized Cyt c maintains its activity, showing a surface-controlled electrode process with the electron-transfer rate constant (k_s) of 14.8 s⁻¹ and electron-transfer coefficient (α) of 0.48, and could be used for the electrocatalytic reduction of hydrogen peroxide (H₂O₂).     

CO preferential oxidation over Au/MnOx-CeO2 catalysts prepared with ultrasonic assistance: Effect of calcination temperature

The Au/MnO_x-CeO₂ catalysts used for CO preferential oxidation were prepared by deposition-precipitation with ultrasonic assistance. The effect of calcination temperature (150-350 °C) on the structures and catalytic performance of the catalysts was systematically investigated. It is found that the catalyst Au/MnO_x-CeO₂ calcined at 250 °C exhibits the best catalytic performance, giving not only the highest CO conversion of 90.9% but also the highest selectivity of oxygen to CO₂ at 120 °C. The results of XRD, TEM and XPS indicate that this catalyst possesses the smallest particle size, the highest dispersion of Au species and the largest amount of surface adsorbed oxygen species, which are favorable to CO oxidation. The H₂-TPR results reveal that the selectivity of oxygen to CO₂ is mainly determined by the reducibility of Au species in the catalysts. The strong interaction between Au species and the support in Au/MnO_x-CeO₂-250 decreases its capability for H₂ dissociation and oxidation, leading to high selectivity of oxygen to CO₂.     

Electrochemical behavior and voltammetric determination of 4-aminophenol based on graphene-chitosan composite film modified glassy carbon electrode

The graphene-chitosan composite film modified glassy carbon electrode (GCE) was fabricated and used to determine 4-aminophenol (4-AP). In 0.1 M pH 6.3 phosphate buffer solution, the redox peak currents of 4-AP increased significantly and the peak-to-peak separation decreased greatly at graphene-chitosan composite film modified GCE compared with bare GCE and chitosan modified GCE, indicating that graphene possessed electrocatalytic activity towards 4-AP. The experimental conditions were optimized and the kinetic parameters were investigated. The oxidation mechanism was discussed. Under the optimal experimental conditions, the oxidation peak current was proportional to 4-AP concentration in the range from 0.2 to 550 μM with the correlation coefficient of 0.9930. The detection limit was 0.057 μM (S/N = 3). Using the proposed method, 4-AP was successfully determined in water samples and paracetamol tablets with standard addition method, suggesting that this method can be applied to determine 4-AP in environments and pharmaceuticals.     

Cathodic deposition of molybdenum and vanadium mixed oxyhydroxide films from V-substituted polymolybdophosphate

We report a new electrochemical route for fabricating molybdenum and vanadium mixed oxyhydroxide films on Au electrode from Keggin-type vanadium-substituted polymolybdophosphate. The process involves a potentiodynamic reduction of aqueous 9-molybdo(VI)-3-vanadophosphosphate(V) ([PMo₉V₃O₄₀]⁶⁻) in the potential region between 0 and −0.7 V versus Ag/AgCl. The resulting MoV oxyhydroxide film electrode gave a stable redox behavior in Na₂SO₄ electrolyte of pH 3. X-ray photoelectron spectroscopy revealed that this results from oxidation/reduction of Mo⁵⁺/Mo⁶⁺ in the film which accompanies extraction/insertion of protons for charge compensation. The deposited V ions remained in the film upon repetitive potential cycling without affecting their oxidation state. Voltammetric data in the presence of sodium nitrite showed electrocatalytic activity of the MoV oxyhydroxide toward the electroreduction of nitrite.     

Nonenzymatic glucose sensor based on flower-shaped Au@Pd core-shell nanoparticles-ionic liquids composite film modified glassy carbon electrodes

A novel nonenzymatic glucose sensor based on flower-shaped (FS) Au@Pd core-shell nanoparticles-ionic liquids (ILs i.e., trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl) imide, [P(C₆)₃C₁₄][Tf₂N]) composite film modified glassy carbon electrodes (GCE) was reported. The Au@Pd nanocatalysts were prepared by seed-mediated growth method, forming the three-dimensional FS nanoparticles, where tens of small Pd nanoparticles (∼3 nm) aggregated on gold seeds (∼20 nm). The FS Au@Pd nanoparticle was a good candidate for the catalytic efficiency of nanometallic surfaces because of its flower-shaped nature, which has greater adsorption capacity. XPS analysis and zeta potential indicated that the surface of Pd atoms is positively charged, profiting the oxidation process of glucose. And ILs acted as bridge connecting Au@Pd one another and bucky gel as platform within the whole nanocomposite. So the modified electrode has higher sensitivity and selectivity owing to intrinsic synergistic effects of this nanocomposite. Amperometric measurements allow observation of the electrochemical oxidation of glucose at 0.0 V (vs. Ag/AgCl), the glucose oxidation current is linear to its concentration in the range of 5 nM-0.5 μM, and the detection limit was found to be 1.0 nM (S/N = 3). The as-prepared nonenzyme glucose sensor exhibited excellent stability, repeatability, and selectivity.     

Amperometric bienzyme glucose biosensor based on carbon nanotube modified electrode with electropolymerized poly(toluidine blue O) film

The amperometric bienzyme glucose biosensor utilizing horseradish peroxidase (HRP) and glucose oxidase (GOx) immobilized in poly(toluidine blue O) (PTBO) film was constructed on multi-walled carbon nanotube (MWNT) modified glassy carbon electrode. The HRP layer could be used to analyze hydrogen peroxide with toluidine blue O (TBO) mediators, while the bienzyme system (HRP + GOx) could be utilized for glucose determination. Glucose underwent biocatalytic oxidation by GOx in the presence of oxygen to yield H₂O₂ which was further reduced by HRP at the MWNT-modified electrode with TBO mediators. In the absence of oxygen, glucose oxidation proceeded with electron transfer between GOx and the electrode mediated by TBO moieties without H₂O₂ production. The bienzyme electrode offered high sensitivity for amperometric determination of glucose at low potential, displaying Michaelis-Menten kinetics. The bienzyme glucose biosensor displayed linear response from 0.1 to 1.2 mM with a sensitivity of 113 mA M⁻¹ cm⁻² at an applied potential of −0.10 V in air-saturated electrolytes.     

Monolayer covalent modification of 5-hydroxytryptophan on glassy carbon electrodes for simultaneous determination of uric acid and ascorbic acid

5-Hydroxytryptophan (5-HTP) was covalently grafted on the surface of glassy carbon electrodes (GCEs) using cyclic voltammetric method in a phosphate buffer solution. The prepared electrode, denoded as 5-HTP/GCE, was characterized by X-ray photoelectron spectroscopy, cyclic voltammetry and differential pulse voltammetry (DPV). Tryptophan grafted GCE (TRP/GCE) and 5-hydroxytryptamine grafted GCE (5-HTP/GCE) were also prepared by the same method for comparison. It was found that the electrocatalytic activities toward the oxidation of uric acid (UA) and ascorbic acid (AA) was in the order of 5-HT/GCE > 5-HTP/GCE > TRP/GCE for UA oxidation and 5-HT/GCE = 5-HTP/GCE > TRP/GCE for AA oxidation. However, the CV current sensitivity was estimated as 4:2:1 for 5-HTP/GCE:5-HT/GCE:TRP/GCE. The DPV peaks for UA and AA oxidation appeared at 0.07 V and 0.34 V versus SCE, respectively, allowing simultaneous determination in mixtures. A linearly response in the range of: 5.0 × 10⁻⁷ to 1.1 × 10⁻⁵ M with the detection limit (s/n = 3) of 2.8 × 10⁻⁷ M for UA determination, and a linear response in the range of: 5.0 × 10⁻⁶ to 1.0 × 10⁻⁴ M with the detection limit of 4.2 × 10⁻⁶ M for AA determination were obtained. This electrode was used for UA and AA determinations in human urine samples satisfactorily.     

Open-circuit-potentials of gas/electrode/YSZ boundary versus molten carbonate reference electrode at medium temperatures: II. Potential response of Au, Pt and Ni-cermet electrodes in CH4 + O2 and H2 + O2 gas mixtures

Values of open-circuit-potentials (OCP) have been determined for pairs of electrodes: Au and Pt, Ni-Ce_0.8Sm_0.2O_1.9 cermet and Au, Pt and Sm_0.5Sr_0.5CoO₃ composite at the YSZ electrolyte, in the uniform atmospheres of xCH₄ + yO₂ + (1 − x − y)Ar gas mixtures with variable x and y coefficients, at 600 °C. The determined dependencies of OCP values on the initial gas mixture compositions have been compared with the respective dependencies calculated for equilibrium or quasi-equilibrium compositions of these gas mixtures. The OCP values for the pair of Pt and Au electrodes have been measured also in the xH₂ + yO₂ + (1 − x − y)Ar uniform gas mixtures but no distinct difference of the OCP values has been observed in this atmosphere. For some pairs of electrodes investigated in xCH₄ + yO₂ + (1 − x − y)Ar atmospheres the measured OCP values have shown differences up to ca 0.9-1.0 V. These differences were stable within large range of compositions of this gas mixture. Within this gas composition range one of the electrodes conserves the potential of oxygen electrode determined by oxygen partial pressure in the initial gas mixture and is insensitive to reaction occurring in the gas phase. These results are discussed on the basis of equilibria or some quasi-equilibria, that establish in the C-H-O gas mixture and the solid carbon deposition is considered. For a given pair of dissimilar electrodes, their selective sensibility to the electrochemical process of oxygen electrode has been confirmed. Within large range of gas mixture concentrations, in the Pt-Au electrode pair Au has shown behavior of the oxygen electrode, whereas the OCP values of the Pt electrode are within the range of hydrogen electrode, also at gas compositions corresponding to the solid carbon stability. With this pair the OCP differences of ca. 600 mV have been obtained. Among three electrodes studied the cermet Ni-Ce_0.8Sm_0.2O_1.9 electrode shows the best electrocatalytic properties resulting in the OCP values following exactly the respective equilibrium dependence. In the pair Ni-Ce_0.8Sm_0.2O_1.9 and Au a stable potential difference of ca. 900 mV have been established. Unexpectedly, Pt electrode in the pair with the Sm_0.5Sr_0.5CoO₃ composite electrode plays role of the oxygen electrode quite insensitive to other components of the equilibrated initial gas mixture. This surprising fact seems indicate that in conditions of the experiments performed the electrocatalytic behavior of the electrode depends not only of the material of this electrode but also on the properties of the second electrode in the given pairs of electrodes.     

A novel hydrogen peroxide biosensor based on Au-graphene-HRP-chitosan biocomposites

Graphene was prepared successfully by introducing -SO₃⁻ to separate the individual sheets. TEM, EDS and Raman spectroscopy were utilized to characterize the morphology and composition of graphene oxide and graphene. To construct the H₂O₂ biosensor, graphene and horseradish peroxidase (HRP) were co-immobilized into biocompatible polymer chitosan (CS), then a glassy carbon electrode (GCE) was modified by the biocomposite, followed by electrodeposition of Au nanoparticles on the surface to fabricate Au/graphene/HRP/CS/GCE. Cyclic voltammetry demonstrated that the direct electron transfer of HRP was realized, and the biosensor had an excellent performance in terms of electrocatalytic reduction towards H₂O₂. The biosensor showed high sensitivity and fast response upon the addition of H₂O₂, under the conditions of pH 6.5, potential −0.3 V. The time to reach the stable-state current was less than 3 s, and the linear range to H₂O₂ was from 5 × 10⁻⁶ M to 5.13 × 10⁻³ M with a detection limit of 1.7 × 10⁻⁶ M (S/N = 3). Moreover, the biosensor exhibited good reproducibility and long-term stability.     

Voltammetric determination of bisoprolol fumarate in pharmaceutical formulations and urine using single-wall carbon nanotubes modified glassy carbon electrode

The electrochemistry of bisoprolol fumarate (BF) has been investigated by differential pulse voltammetry at a single-wall carbon nanotubes (SWNTs) modified glassy carbon electrode (GCE). The prepared electrode showed an excellent electrocatalytic activity towards the oxidation of BF leading to a marked improvement in sensitivity as compared to bare glassy carbon electrode where electrochemical activity for the analyte cannot be observed. The SWNTs-modified GCE exhibited a sharp anodic peak at a potential of ∼950 mV for the oxidation of BF. Under optimum conditions linear calibration curve was obtained over the BF concentration range 0.01-0.1 mM in 0.5 M phosphate buffer solution (pH 7.2) with a correlation coefficient of 0.9789 and detection limit of 8.27 × 10⁻⁷ M. The modified electrode has been applied for the drug determination in human urine with no prior extraction and in commercial tablets. The proposed method has also been validated.     

Performance evaluation of CNT/polypyrrole/MnO2 composite electrodes for electrochemical capacitors

A ternary composite of CNT/polypyrrole/hydrous MnO₂ is prepared by in situ chemical method and its electrochemical performance is evaluated by using cyclic voltammetry (CV), impedance measurement and constant-current charge/discharge cycling techniques. For comparative purpose, binary composites such as CNT/hydrous MnO₂ and polypyrrole/hydrous MnO₂ are prepared and also investigated for their physical and electrochemical performances. The specific capacitance (SC) values of the ternary composite, CNT/hydrous MnO₂ and polypyrrole/hydrous MnO₂ binary composites estimated by CV technique in 1.0 M Na₂SO₄ electrolyte are 281, 150 and 35 F g⁻¹ at 20 mV s⁻¹ and 209, 75 and 7 F g⁻¹ at 200 mV s⁻¹, respectively. The electrochemical stability of ternary composite electrode is investigated by switching the electrode back and forth for 10,000 times between 0.1 and 0.9 V versus Ag/AgCl at 100 mV s⁻¹. The electrode exhibits good cycling stability, retaining up to 88% of its initial charge at 10,000th cycle. A full cell assembled with the ternary composite electrodes shows a SC value of 149 F g⁻¹ at a current loading of 1.0 mA cm⁻² during initial cycling, which decreased drastically to a value of 35 F g⁻¹ at 2000th cycle. Analytical techniques such as scanning electron microscopy (SEM), X-ray diffraction spectroscopy (XRD), Brunauer-Emmet-Teller (BET) surface area measurement and inductively coupled plasma-atomic emission spectrometry (ICP-AES) are also used to characterize the composite materials.     

Electrochemical behavior of cysteine at a CuGeO3 nanowires modified glassy carbon electrode

A CuGeO₃ nanowire modified glassy carbon electrode was fabricated and characterized by scanning electron microscopy. The results of electrochemical impedance spectroscopy reveal that electron transfer through nanowire film is facile compared with that of bare glassy carbon electrode. The modified electrode exhibited a novel electrocatalytic behavior to the electrochemical reactions of l-cysteine in neutral solution, which was not reported previously. Two pairs of semi-reversible electrochemical peaks were observed and assigned to the processes of oxidation/reduction and adsorption/desorption of cysteine at the modified electrode, respectively. The electrochemical response of cysteine is poor in alkaline condition and is enhanced greatly in acidic solution, suggesting that hydrogen ions participate in the electrochemical oxidation process of cysteine. The intensities of two anodic peaks varied linearly with the concentration of cysteine in the range of 1 × 10⁻⁶ to 1 × 10⁻³ mol L⁻¹, which make it possible to sensitive detection of cysteine with the CuGeO₃ nanowire modified electrode. Furthermore, the modified electrode exhibited good reproducibility and stability.     

An enzyme-based microfluidic biofuel cell using vitamin K3-mediated glucose oxidation

Viamin K₃-modified poly-l-lysine (PLL-VK₃) was synthesized and used as the electron transfer mediator during catalytic oxidation of NADH by diaphorase (Dp) at the anode of biofuel cell. PLL-VK₃ and Dp were co-immobilized on an electrode and then coated with NAD⁺-dependent glucose dehydrogenase (GDH). The resulting enzymatic bilayer (abbreviated PLL-VK₃/Dp/GDH) catalyzed glucose oxidation. Addition of carbon black (Ketjenblack, KB) into the bilayer enlarged the effective surface area of the electrode and consequentially increased the catalytic activity. An oxidation current of ca. 2 mA cm⁻² was observed when the electrochemical cell contained a stirred 30 mM glucose, 1.0 mM NAD⁺, pH 7.0 phosphate-buffered electrolyte solution. The performance of glucose/O₂ biofuel cells, constructed as fluidic chips with controllable fuel flow and containing a KB/PLL-VK₃/Dp/GDH-coated anode and an Ag/AgCl or a polydimethylsiloxane-coated Pt cathode, were evaluated. The open circuit voltage of the cell with the PDMS-coated Pt cathode was 0.55 V and its maximum power density was 32 μW cm⁻² at 0.29 V when a pH 7.0-buffered fuel containing 5.0 mM glucose and 1.0 mM NAD⁺ was introduced into the cell at a flow rate of 1.0 mL min⁻¹. The cell's output increased as the flow rate increased. During 18 h of continuous operation of the cell with a load of 100 kΩ, the output current density declined by ca. 50%, probably due to swelling of the enzyme bilayer.     

Electrochemical characteristics of dopamine oxidation at palladium hexacyanoferrate film, electroless plated on aluminum electrode

A novel electrode material was obtained at an aluminum electrode (Al) by a simple electroless method including two consecutive procedures: (i) the electroless deposition of metallic palladium on the Al electrode surface from PdCl₂ + 25% ammonia solution and (ii) the chemical transformation of deposited palladium to the palladium hexacyanoferrate (PdHCF) films in a solution containing 0.5 M K₃[Fe(CN)₆]. The modified Al electrode demonstrated a well-behaved redox couple due to the redox reaction of the PdHCF film. The PdHCF film showed an excellent electrocatalytic activity toward the oxidation of dopamine (DA). The effect of solution pH on the voltammetric response of DA has been investigated. A linear calibration graph was obtained over the DA concentration range 2-51 mM. The rate constant k and transfer coefficient α for the catalytic reaction and the diffusion coefficient of DA in the solution D, were found to be 4.67 × 10² M⁻¹ s⁻¹, 0.63 and 2.5 × 10⁻⁶ cm² s⁻¹, respectively. The interference of ascorbic acid was investigated and greatly reduced using a thin film of Nafion on the modified electrode. The modified electrode indicated reproducible behavior and a high level stability during electrochemical experiments, making it particularly suitable for the analytical purposes.