Ionic liquids and plastic crystals based on tertiary sulfonium and bis(fluorosulfonyl)imide

A new series of low-melting, low-viscosity, hydrophobic ionic liquids based on relatively small tertiary sulfonium cations ([R¹R²R³S]⁺, wherein R¹, R², R³ = CH₃ or C₂H₅, R³ = CH₂CH₂OCH₃, CH₂CH₂COOCH₃, CH₂CH₂CN) and bis(fluorosulfonyl)imide (FSI⁻) anion have been prepared and characterized. The important physicochemical and electrochemical properties of these salts, such as melting point, glass transition, viscosity, density, ionic conductivity, thermal and electrochemical stability, have been determined. The influence of structure variation in the tertiary sulfonium cations on the above physicochemical properties is discussed. Among these new salts, some of them show the desirable properties including low-melting points, low viscosities, and high conductivities, to be selected as potential candidates as electrolytes in energy devices, and two salts are ionic plastic crystals.     

Effect of the alkyl group on the synthesis and the electrochemical properties of N-alkyl-N-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)imide ionic liquids

The effect of the alkyl side group on the synthesis and the electrochemical properties of N-alkyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR_1ATFSI) ionic liquids (ILs) is reported. The investigation was focused on the PYR_1ATFSI ionic liquid family because of the interesting electrochemical properties of the members with propyl and butyl side chains. Side alkyl groups (A = C_nH_2n+1 with n ranging from 1 to 10) of different length and structure were used for the synthesis of PYR_1ATFSI materials. NMR and DSC have shown that the ionic liquids were correctly synthesized with the exception of the compounds with tertiary side chains. Most of the materials exhibited a conductivity higher than 10⁻³ S cm⁻¹ already at 12 °C. In the molten state a moderate conductivity decrease was observed with increasing the length and the branching of the side chain (C₂H_2n+1) group according with the change of viscosity of the ionic liquids. Most of the PYR_1ATFSI samples exhibited an electrochemical stability window exceeding 5 V.     

Impedance study of protecting film formation on lithium and lithiated graphite induced by bis(fluorosulfonyl) imide anion

The process of Li⁺ reduction from room temperature ionic liquids consisting of N-methyl-N-propylpyrrolidinium cation (MPPyr⁺) and bis(fluorosulfonyl) imide (FSI⁻) or bis(trifluoromethanesulfonyl) imide (TFSI⁻) anions was studied with the use of impedance spectroscopy. Reduction was carried out on both metallic lithium (Li) and graphite (G) electrodes. It has been found that the FSI anion in high amounts is able to form a protective film on both graphite and metallic lithium. The Li⁺/Li couple should rather be represented by a Li⁺/SEI/Li system. The SEI structure depends on the manner of its formation (chemical or electrochemical) and is not stable with time. The rate constant for the Li⁺ + e⁻ → Li process at the Li/SEI/Li⁺ (in MPPyrFSI) interface is k_o = 4.2 × 10⁻⁵ cm/s. In the case of carbon electrodes (G/SEI/Li⁺ interface), lithium diffusion in solid graphite is the rate determining step, reducing current by ca. two orders of magnitude, from ca. 10⁻⁴ A/cm², characteristic of the Li/SEI/Li⁺ electrode, to ca. 10⁻⁶ A/cm².     

Electrochemical and density functional theory study of bis(cyclopentadienyl) mono(β-diketonato) titanium(IV) cationic complexes

The electrochemical behaviour of fluorinated bis(cyclopentadienyl) mono(β-diketonato) titanium(IV) complexes, of general formula [Cp₂Ti(R′COCHCOR)]⁺ClO₄⁻ with Cp = cyclopentadienyl and R′, R = CF₃, C₄H₃S; CF₃, C₄H₃O; CF₃, Ph (C₆H₅); CF₃, CH₃; CH₃, CH₃; Ph, Ph and Ph, CH₃ is described. Both metal and ligand based redox processes are observed. The chemically and electrochemically reversible Ti^IV/Ti^III couple is followed by an irreversible ligand reduction at a considerably more negative (cathodic) potential. A comparison of the ligand reduction in its free and chelated state indicates that the β-diketonato ligand (R′COCHCOR)⁻ in [Cp₂Ti(R′COCHCOR)]⁺ClO₄⁻ is electroactive at more negative potentials. A theoretical density functional theory (DFT) study shows that a highly localized metal centred frontier orbital dominates the Ti^IV/Ti^III redox chemistry resulting in a non-linear relationship between the formal redox potential (E°′) and the sum of the group electronegativities of the R and R′ groups, χ_R + χ_R′, of the ligand. Linear relationships, however, are obtained between the DFT calculated electron affinity (EA) of the complexes and χ_R + χ_R′, the pK_a of the free β-diketones R′COCH₂COR and the carbonyl stretching frequency, v_CO, of the complexes. The DFT calculated electronic structure of the second reduced species [Cp₂Ti(β-diketonato)]⁻ shows that it is best described as Ti(III) coupled to a β-diketonato radical.     

Accelerating rate calorimetry studies of the reactions between ionic liquids and charged lithium ion battery electrode materials

Using accelerating rate calorimetry (ARC), the reactivity between six ionic liquids (with and without added LiPF₆) and charged electrode materials is compared to the reactivity of standard carbonate-based solvents and electrolytes with the same electrode materials. The charged electrode materials used were Li₁Si, Li₇Ti₄O₁₂ and Li_0.45CoO₂. The experiments showed that not all ionic liquids are safer than conventional electrolytes/solvents. Of the six ionic liquids tested, 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide (EMI-FSI) shows the worst safety properties, and is much worse than conventional electrolyte. 1-Ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMI-TFSI) and 1-propyl-1-methylpyrrolidinium bis(fluorosulfonyl)imide (Py13-FSI) show similar reactivity to carbonate-based electrolyte. The three ionic liquids 1-butyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide (BMMI-TFSI), 1-butyl-1-methylpiperidinium bis(trifluoromethanesulfonyl)imide (Pp14-TFSI) and N-trimethyl-N-butylammonium bis(trifluoromethanesulfonyl)imide (TMBA-TFSI) show similar reactivity and are much safer than the conventional carbonate-based electrolyte. A comparison of the reactivity of ionic liquids with common anions and cations shows that ionic liquids with TFSI⁻ are safer than those with FSI⁻, and liquids with EMI⁺ are worse than those with BMMI⁺, Py13⁺, Pp14⁺ and TMBA⁺.     

Spectroscopic and structural studies of di-ureasils doped with lithium perchlorate

Di-urea cross-linked POE/siloxane hybrid ormolytes (di-ureasils) doped with a wide concentration range of lithium perchlorate trihydrate (LiClO₄·3H₂O) (200 ≥ n ≥ 0.5, where n expresses the salt content in terms of the number of ether oxygen atoms per Li⁺ ion) have been analysed by Fourier transform infrared and Raman (FT-IR and FT-Raman, respectively) spectroscopies and X-ray diffraction (XRD). The results obtained lead us to conclude that the xerogels with n ≥ 5 are totally amorphous. At n ≤ 1 free salt is observed. “Free” ClO₄⁻ ions appear to be the main charge carriers at the conductivity maximum located within the 25 ≤ n ≤ 8 composition range of this family of ormolytes. At n = 15 ClO₄⁻ ions coordinated in mono/tridentate (C_3v symmetry) and bidentate (C_2v symmetry) configurations were detected. In salt-rich samples with n < 15 there is a marked tendency for ionic association. The resulting decrease that occurs in the concentration of “free” ions is consistent with the observed significant decrease of the ionic conductivity. The analysis of the “amide I” and “amide II” regions provided solid proof that the Li⁺ ions bond to the urea carbonyl oxygen atoms over the entire range of salt concentration studied.     

Room temperature living cationic polymerization of styrene with HX-styrenic monomer adduct/FeCl3 systems in the presence of tetrabutylammonium halide and tetraalkylphosphonium bromide salts

Living cationic polymerization of styrene was achieved with a series of initiating systems consisting of a HX-styrenic monomer adduct (X = Br, Cl) and ferric chloride (FeCl₃) in conjunction with added salts such as tetrabutylammonium halides (nBu₄N⁺Y⁻; Y⁻ = Br⁻, Cl⁻, I⁻) or tetraalkylphosphonium bromides [nR′₄PBr; R′ = CH₃CH₂-, CH₃(CH₂)₂CH₂-, CH₃(CH₂)₆CH₂-] or tetraphenylphosphonium bromide [(C₆H₅)₄PBr] in dichloromethane (CH₂Cl₂) and in toluene. Comparison of the molecular weight distributions (MWDs) of the polystyrenes prepared at different temperatures (e.g., −25 °C, 0 °C and 25 °C) showed that the polymerization is better controlled at ambient temperature (25 °C). The polymerization was almost instantaneous (completed within 1 min) and quantitative (yield ∼100%) in CH₂Cl₂. In CH₂Cl₂, polystyrenes with moderately narrow (M_w/M_n ∼ 1.33-1.40) and broad (M_w/M_n ∼ 1.5-2.4) MWDs were obtained respectively with and without nBu₄N⁺Y⁻. However, in toluene, the MWDs of the polystyrenes obtained respectively with and without nBu₄N⁺Y⁻/nR′₄P⁺Br⁻ were moderately narrow (M_w/M_n = 1.33-1.5) and extremely narrow (M_w/M_n = 1.05-1.17). Livingness of this polymerization in CH₂Cl₂ was confirmed via monomer-addition experiment as well as from the study of molecular weights of obtained polystyrenes prepared simply by varying monomer to initiator ratio. A possible mechanistic pathway for this polymerization was suggested based on the results of the ¹H NMR spectroscopic analysis of the model reactions as well as the end group analysis of the obtained polymer.     

Synthesis and electrochemical characterization of PEO-based polymer electrolytes with room temperature ionic liquids

New gel polymer electrolytes containing 1-butyl-4-methylpyridinium bis(trifluoromethanesulfonyl)imide (BMPyTFSI) ionic liquid are prepared by solution casting method. Thermal and electrochemical properties have been determined for these gel polymer electrolytes. The addition of BMPyTFSI to the P(EO)₂₀LiTFSI electrolyte results in an increase of the ionic conductivity, and at high BMPyTFSI concentration (BMPy⁺/Li⁺ = 1.0), the ionic conductivity reaches the value of 6.9 × 10⁻⁴ S/cm at 40 °C. The lithium ion transference numbers obtained from polarization measurements at 40 °C were found to decrease as the amount of BMPyTFSI increased. However, the lithium ionic conductivity increased with the content of BMPyTFSI. The electrochemical stability and interfacial stability for these gel polymer electrolytes were significantly improved due to the incorporation of BMPyTFSI.     

Physical and electrochemical properties of 1-(2-hydroxyethyl)-3-methyl imidazolium and N-(2-hydroxyethyl)-N-methyl morpholinium ionic liquids

Various ionic liquids (ILs) were prepared via metathesis reaction from two kinds of 1-(2-hydroxyethyl)-3-methyl imidazolium ([HEMIm]⁺) and N-(2-hydroxyethyl)-N-methyl morphorinium ([HEMMor]⁺) cations and three kinds of tetrafluoroborate ([BF₄]⁻), bis(trifluoromethanesulfonyl)imide ([TFSI]⁻) and hexafluorophosphate ([PF₆]⁻) anions. All the [HEMIm]⁺ derivatives were in a liquid state at room temperature. In particular, [HEMIm][BF₄] and [HEMIm][TFSI] showed no possible melting point from −150 °C to 200 °C by DSC analysis, and their high thermal stability until 380-400 °C was verified by TGA analysis. Also, their stable electrochemical property (electrochemical window of more than 6.0 V) and high ionic conductivity (0.002-0.004 S cm⁻¹) further confirm that the suggested ILs are potential electrolytes for use in electrochemical devices. Simultaneously, the [HEMMor]⁺ derivatives have practical value in electrolyte applications because of their easy synthesis procedures, cheap morpholinium cation sources and possibilities of high Li⁺ mobility by oxygen group in the morpholinium cation. However, [HEMMor]⁺ derivatives showing high viscosity usually had lower ionic conductivities than [HEMIm]⁺ derivatives.     

Asymmetrical dicationic ionic liquids based on both imidazolium and aliphatic ammonium as potential electrolyte additives applied to lithium secondary batteries

Asymmetrical dicationic ionic liquids based on the combination of imidazolium and aliphatic ammonium cations with TFSI anion, MIC_nN₁₁₁-TFSI₂, have been synthesized for the first time, wherein MI represents imidazolium cation, N₁₁₁ represents trimethylammonium cation, and C_n represents spacer length. The physical and electrochemical properties of this family of ionic liquids were studied. 1-(3-Methylimidazolium-1-yl)ethane-(trimethylammonium) bi[bis(trifluoromethane-sulfonyl) imide] (MIC₂N₁₁₁-TFSI₂) shows solid-solid transition characteristics. 1-(3-Methylimidazolium-1-yl)pentane-(trimethylammonium) bi[bis(trifluoromethan-esulfonyl)imide] (MIC₅N₁₁₁-TFSI₂) has one of the lowest solid-liquid transformation temperatures among analogues, and belongs to the greatest thermal stable ionic liquids. Additionally, it has an order of conductivity of 10⁻¹ ms cm⁻¹, and electrochemical window of about 3.7 V at room temperature. To evaluate the potential of MIC₅N₁₁₁-TFSI₂ as an additive of electrolyte for lithium secondary batteries, cells composed of LiMn₂O₄ cathode/1 M LiPF₆ in EC:DMC (1:1, v/v) electrolytic solution containing 5 wt% of MIC₅N₁₁₁-TFSI₂/lithium metal anode have been prepared. The charge-discharge cycling test reveals that unlike the cases of Li/LiMn₂O₄ cells employing a conventional electrolyte with a monocationic ionic liquid, such as 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl) imide (EtMeImTFSI) as an additive, the performances of Li/LiMn₂O₄ cells do not drop with the addition of MIC₅N₁₁₁-TFSI₂ at 1C rate, moreover, the cell exhibits better discharge capacity and cycle durability compared with the cell using the conventional electrolyte.     

Simple introduction of anion trapping site to polymer electrolytes through dehydrocoupling or hydroboration reaction using 9-borabicyclo[3.3.1]nonane

Organoboron-based anion trapping polymer electrolytes were synthesized through hydroboration or dehydrocoupling reaction between poly(propylene oxide) (PPO) oligomer (M_n = 400, 1200, 2000 and 4000) and 9-borabicyclo[3.3.1]nonane (9-BBN). Obtained oligomers were added various lithium salts (LiN(CF₃SO₂)₂, LiSO₃CF₃, LiCO₂CF₃ or LiBr) to analyze the ionic conductivity and lithium ion transference number (tLi⁺). The ionic conductivity of the oligomer in the presence of LiN(CF₃SO₂)₂ showed higher ionic conductivity than other systems, however, the tLi⁺ was less than 0.3. When LiSO₃CF₃ or LiCO₂CF₃, was added high tLi⁺ over 0.6 was obtained. Such difference in tLi⁺ can be explained by HSAB principle. Since boron is a hard acid, soft (CF₃SO₂)₂N⁻ anion can not be trapped effectively. High ionic conductivity of 1.3 × 10⁻⁶ S cm⁻¹ and high tLi⁺ of 0.73 was obtained when PPO chain length was 2000. These values of facilely prepared polymer electrolytes are comparable to those of the PPOs having covalently bonded salt moieties on the chain ends.     

New boron compounds as additives for lithium polymer electrolytes

A new class of difluoroalkoxyborane compounds ([R_nOBF₂]₂) containing oligooxyethylene groups of various molecular weight in the form of a methyl monoether (R_n = CH₃(OCH₂CH₂)_n, n = 1, 2, 3 and 7) has been obtained in the reaction of BF₃ etherate with appropriate glycols. ¹H, ¹¹B and ¹⁹F NMR spectral analysis of the derivatives obtained was carried out and the properties as Lewis acids of these derivatives have been compared with that of corresponding trialkoxyboranes and boron trifluoride in reaction with pyridine. The strength of the interaction of [R₂OBF₂]₂ with the differing in “hardness” anions of various lithium salts has been analyzed on the basis of NMR spectra. The [R_nOBF₂]₂ obtained were used as additives for polymer electrolytes containing PEO as polymer matrix and various lithium salts at an equimolar ratio of the boron compound to salt. The highest ionic conductivities, in the order 10⁻⁵ to 10⁻⁴ S cm⁻¹ at 20-70 °C, were achieved for systems containing LiI and LiN(CF₃SO₂)₂. The lithium transference number (t₊) values, determined by the electrochemical method by steady-state technique for LiF and LiCF₃SO₃ are in the 0.6-0.8 range.     

Spectroscopic study of the electrochemical behaviour of tantalum(V) chloride and oxochloride species in 1-butyl-1-methylpyrrolidinium chloride

FTIR spectroscopy was used to identify the oxochloride species of tantalum(V) in ionic liquids and to confirm the correlations between their presence in electrolytes and the changes in the route of electrochemical reduction of tantalum(V). Electrochemical behaviour of the mixtures (x)1-butyl-1-methyl-pyrrolidinium chloride-(1 − x)TaCl₅ at x = 0.80, 0.65, and 0.40 was investigated over the temperature range 90-160 °C with respect to the electrochemical deposition of tantalum and was discussed in terms of spectroscopic data. The mechanism of electrochemical reduction of tantalum(V) in the basic and acidic electrolytes depends strongly on the structure and composition of the electro active species of tantalum(V) defined by the molar composition of ionic liquids and on the competition between tantalum(V) chloride and oxochloride species. In the basic mixture at x = 0.80, with octahedral [TaCl₆]⁻ ions as the electrochemically active species only the first reduction step Ta⁵⁺ → Ta⁴⁺ at −0.31 V was observed. The competitive reduction of tantalum(V) oxochloride species occurs at more anodic potential (−0.01 V) than the reduction of the chloride complexes and can restrict the further reduction of tantalum(IV). In the basic ionic liquid at x = 0.65, the cyclic voltammograms exhibit reduction peaks at −0.31 V and −0.51 V attributed to the diffusion controlled process as [TaCl₆]⁻ + e⁻ → [TaCl₆]²⁻ and [TaCl₆]²⁻ + e⁻ → [TaCl₆]³⁻. The further irreversible reduction of tantalum(III) to metallic state may occur at −2.1 V. In the acidic ionic liquids, at x = 0.40 the electrochemical reduction of two species occurs, TaCl₆⁻ and Ta₂Cl₁₁⁻ and it is limited by two electron transfer for both of them at −0.3 V and −1.5 V, respectively.     

Solvents in salt electrolyte: Benefits and possible use as electrolyte for lithium-ion battery

An EC/DEC [40:60% (v/v)] solvent mixture has been added in various amounts to the ionic liquid (IL) hexyltrimethylammonium bis(trifluoromethylsulfonyl)imide (N₁₁₁₆-NTf₂) in the presence of LiNTf₂ (lithium bis(trifluoromethylsulfonyl)imide) as lithium salt for possible use as electrolytes in lithium-ion batteries. These electrolytes exhibit a larger thermal stability than the reference electrolyte EC/DEC [40:60] + LiNTf₂ 1 M when the percentage of the IL exceeds 30% (v/v). All studied electrolytes are glass forming ones with an ideal glass transition temperature of ca. −85 °C(±5 °C), which has been determined by application of the VTF theory to conductivity and viscosity measurements and confirmed by DSC (T_g = −90 ± 5 °C). An electrochemical window of about 5 V versus Li/Li⁺ was measured at a glassy carbon electrode. The cycling ability of the optimized electrolyte N₁₁₁₆-NTf₂/EC:DEC (40/60% (v/v)) + 1 M LiNTf₂ has been investigated at a titanate oxide (Li₄Ti₅O₁₂) and a cobalt oxide (Li_xCoO₂) electrodes. Cycling the positive and the negative electrodes was conducted successfully with a high capacity and without any significant fading.     

1-Alkyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide ionic liquids as highly safe electrolyte for Li/LiFePO4 battery

Several 1-alkyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide ionic liquids (alkyl-DMimTFSI) were prepared by changing carbon chain lengths and configuration of the alkyl group, and their electrochemical properties and compatibility with Li/LiFePO₄ battery electrodes were investigated in detail. Experiments indicated the type of ionic liquid has a wide electrochemical window (−0.16 to 5.2 V vs. Li⁺/Li) and are theoretically feasible as an electrolyte for batteries with metallic lithium as anode. Addition of vinylene carbonate (VC) improves the compatibility of alkyl-DMimTFSI-based electrolytes towards lithium anode and LiFePO₄ cathode, and enhanced the formation of solid electrolyte interface to protect lithium anodes from corrosion. The electrochemical properties of the ionic liquids obviously depend on carbon chain length and configuration of the alkyl, including ionic conductivity, viscosity, and charge/discharge capacity etc. Among five alkyl-DMimTFSI-LiTFSI-VC electrolytes, Li/LiFePO₄ battery with the electrolyte-based on amyl-DMimTFSI shows best charge/discharge capacity and reversibility due to relatively high conductivity and low viscosity, its initial discharge capacity is about 152.6 mAh g⁻¹, which the value is near to theoretical specific capacity (170 mAh g⁻¹). Although the battery with electrolyte-based isooctyl-DMimTFSI has lowest initial discharge capacity (8.1 mAh g⁻¹) due to relatively poor conductivity and high viscosity, the value will be dramatically added to 129.6 mAh g⁻¹ when 10% propylene carbonate was introduced into the ternary electrolyte as diluent. These results clearly indicates this type of ionic liquids have fine application prospect for lithium batteries as highly safety electrolytes in the future.     

Enhanced luminescence of novel Ca3B2O6:Dy phosphors by Li-codoping for LED applications

The Ca_3−xB₂O₆:xDy³⁺ (0.0 ≤ x ≤ 0.105) and Ca_2.95−yDy_0.05B₂O₆:yLi⁺ (0 ≤ y ≤ 0.34) phosphors were synthesized at 1100 °C in air by solid-state reaction route. The as-synthesized phosphors were characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM), photoluminescence excitation (PLE) and photoluminescence (PL) spectra. The PLE spectra show the excitation peaks from 300 to 400 nm is due to the 4f-4f transitions of Dy³⁺. This mercury-free excitation is useful for solid state lighting and light-emitting diodes (LEDs). The emission of Dy³⁺ ions upon 350 nm excitation is observed at 480 nm (blue) due to the ⁴F_9/2 → ⁶H_15/2 transitions, 575 nm (yellow) due to ⁴F_9/2 → ⁶H_13/2 transitions and a weak 660 nm (red) due to ⁴F_9/2 → ⁶H_11/2 emissions, respectively. The optimal PL intensity of the Ca_3−xB₂O₆:xDy³⁺ phosphors is found to be x = 0.05. Moreover, the PL results from Ca_2.95−yDy_0.05B₂O₆:yLi⁺ phosphors show that Dy³⁺ emissions can be enhanced with the increasing codopant Li⁺ content till y = 0.22. By simulation of white light, the CIE of the investigated phosphors can be tuned by varying the content of Li⁺ ions, and the optimal CIE value (0.300, 0.298) is realized when the content of Li⁺ ions is y = 0.22. All the results imply that the Ca_2.95−yDy_0.05B₂O₆:yLi⁺ phosphors could be potentially used as white LEDs.     

Di-ureasil xerogels containing lithium bis(trifluoromethanesulfonyl)imide for application in solid-state electrochromic devices

In this study we report the characterization of a prototype solid-state electrochromic device based on poly(ethylene oxide) (PEO)/siloxane hybrid networks doped with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). The polymer networks prepared, designated as di-ureasils and represented as d-U(2000), were produced by a sol-gel procedure and are composed of a siliceous framework to which both ends of polyether chains containing about 40 CH₂CH₂O units are covalently bonded through urea linkages. Samples with compositions of 200 ≥ n ≥ 0.5 (where n is the molar ratio of CH₂CH₂O to Li⁺) were characterized by thermal analysis, complex impedance measurements and cyclic voltammetry at a gold microelectrode. Electrolyte samples were obtained as self-supporting, transparent, amorphous films and at room temperature the highest conductivity was observed with the d-U(2000)₃₅LiTFSI composition (3.2 × 10⁻⁵ Ω⁻¹ cm⁻¹). We report the results of preliminary evaluation of these polymer electrolytes as multi-functional components in prototype electrochromic displays. Device performance parameters such as coloration efficiency, optical contrast and image stability were also evaluated. The electrolytes with n > 8 presented an optical density above 0.56 and display assemblies exhibited good open-circuit memory and stable electrochromic performances.     

Voltammetric investigation of the dissociative electron transfer to polychloromethanes at catalytic and non-catalytic electrodes

The electrochemical behavior of CCl₄, CHCl₃ and CH₂Cl₂ has been investigated by cyclic voltammetry at glassy carbon and silver electrodes in DMF + 0.1 M Et₄NClO₄ in the absence and presence of a good proton donor. At both electrodes, each compound exhibits a series of reduction peaks which represent sequential hydrodechlorination steps up to methane. The nature of the electrode material and the proton availability of the medium affect drastically the voltammetric pattern of the compounds. Silver exhibits extraordinary electrocatalytic properties toward the reduction process, with positive shifts of the peak potentials of about 0.57-0.95 V as compared to glassy carbon. Reduction of any polychloromethane, CH_nCl_(4−n) (n = 0-2), yields the carbanion CH_nCl_(3−n)⁻ which partitions into two reaction channels: (i) protonation and (ii) Cl⁻ elimination to give a carbene :CH_nCl_(2−n). If a strong proton donor is added into the solution, sequential hydrodechlorination becomes the principal reaction route at both electrodes. When, instead, purposely added acid is not present in solution, both reaction pathways ought to be considered. In these conditions, when possible, self-protonation reactions play an important role in the overall reduction process.     

Electrochemical behavior of Ge and GeX2 (X = O, S) glasses: Improved reversibility of the reaction of Li with Ge in a sulfide medium

Sulfide glasses have been considered as new anode materials for lithium-ion batteries because their high ionic conductivity (approximately ≥10⁻⁴ S/cm) (more than one order of magnitude higher than oxide glasses (approximately ≤10⁻⁶ S/cm)) was expected to accelerate Li⁺ ion insertion into and extraction from anode materials during charge and discharge reactions. This intrinsic property can yield the reversible lithium-alloying reaction by minimizing the aggregation of lithium-alloy phases leading to the improvement of cycling behavior. To examine sulfide glasses as new anode materials, GeS₂ glass was chosen for study in this work due to its stability in air-atmospheres. The electrochemical properties of the GeS₂ glass were compared with those of the Ge metal and GeO₂ glass. The initial insertion of lithium into the GeX₂ (X = O, S) glasses leads to the formation of Li₂X (X = O, S) phases associated with the irreversible capacity on the first cycle. The improved reversibility of the reaction of lithium with Ge was observed in the Li₂S medium rather than Li₂O one, which leads to the improvement of cycle performance in the GeS₂ glass anode.     

Relationship between glass network structure and conductivity of Li2O-B2O3-P2O5 solid electrolyte

Solid state glass electrolyte, xLi₂O-(1 − x)(yB₂O₃-(1 − y)P₂O₅) glasses were prepared with wide range of composition, i.e. x = 0.35 - 0.5 and y = 0.17 - 0.67. This material system is one of the parent compositions for chemically and electrochemically stable solid-state electrolyte applicable to thin film battery. Lithium ion conductivity of Li₂O-B₂O₃-P₂O₅ glasses was studied in the correlation to the structural variation of glass network by using FTIR and Raman spectroscopy. The measured ionic conductivity of the electrolyte at room temperature increased with x and y. The maximum conductivity of this glass system was 1.6 × 10⁻⁷ Ω⁻¹ cm⁻¹ for 0.45Li₂O-0.275B₂O₃-0.275P₂O₅ at room temperature. It was shown that the addition of P₂O₅ reduces the tendency of devitrification and increases the maximum amount of Li₂O added into glass former without devitrification. As Li₂O and B₂O₃ contents increased, the conductivity of glass electrolyte increased due to the increase of three-coordinated [BO₃] with a non-bridging oxygen (NBO).