共查询到19条相似文献,搜索用时 93 毫秒
1.
2.
3.
结合运城发电公司600MW直接空冷机组空冷系统实际运行中存在的问题,对空冷系统防冻保护控制、空冷风机超频控制、大风快速减负荷等功能逻辑进行优化,实现了空冷系统运行的自动控制,提高空冷机组运行的经济性与安全性。 相似文献
4.
本文结合机组调试及运行期间实际运行情况详细介绍了电厂空冷机组空冷系统的控制和运行。通过对庙沟门电厂2×600MW直接空冷机组空冷控制系统控制方式的研究,保证机组满足不同工况下运行要求。 相似文献
5.
冷却空气迎面风速和温度对直接空冷系统动态特性的影响 总被引:1,自引:0,他引:1
直接空冷机组和常规湿冷机组由于在冷端系统上差别较大,使得空冷机组的控制必须考虑外部环境变化对于汽轮机冷端的影响。该文在空冷凝汽器静态变工况计算的基础上,考虑空冷系统凝汽器的蓄热效应,建立了直接空冷凝汽器动态数学模型,该模型能够分析冷却空气迎面风速和环境温度对直接空冷系统凝汽器动态特性的影响。得到了冷却空气迎面风速和环境温度对直接空冷机组背压的影响曲线,仿真结果表明随着环境温度的升高和冷却空气迎面风速的降低,系统的稳定时间变长,证明直接空冷系统凝汽器的时间常数随着空冷凝汽器的散热能力的强弱而有相应变化,并为进一步研究适用于直接空冷机组的背压保护控制策略提供了参考。 相似文献
6.
为解决火力发电厂用水问题,目前在富煤缺水地区选择空冷方式已经成为主导方向。空冷的控制对于机组的运行有着重要作用,以新疆哈密大南湖电厂2×300MW工程直接窄冷系统为例,介绍300MW及以上机组直接空冷系统的控制特点,分析控制系统设计方案。 相似文献
7.
以通辽发电总厂600 MW 直接空冷机组为研究对象,给出了不同的环境温度和运行工况下空冷机组最优经济背压值,实现了背压控制设定值的自动设定功能,避免了手动设定背压值对机组运行经济性的影响.对空冷系统冬季防冻保护控制逻辑进行了优化,实现了空冷系统的全过程自动控制,提高了空冷机组运行的经济性和安全性. 相似文献
8.
分析比较了300MW、600MW、1000MW3种机组采用间接空冷系统和直接空冷,系统方案时电功率的变化趋势,得出:机组容量为300MW、600MW时,间接空冷系统电功率小于直接空冷系统电功率;机组容量为1000MW时,间接空冷系统电功率大于直接空冷系统电功率。 相似文献
9.
为使直接空冷机组安全度夏,保证机组的出力,很多直接空冷机组都采用了喷淋降温装置,以提高直接空冷机组度夏的能力。传统的喷淋降温系统控制系统过于简单,造成大量除盐水的浪费,从而增加了机组能耗成本。本文通过对喷淋降温装置控制系统的分析,提出了较为合理的控制手段。分析结果表明,采用优化后的喷淋降温装置可有效冷却空冷发电机组温度... 相似文献
10.
直接空冷系统优化设计和环境温度变化运行经济性的分析 总被引:1,自引:0,他引:1
提出了直接空冷系统优化设计的参数和优化目标函数,并对某台600MW直接空冷机组进行了优化设计.根据直接空冷机组的传热方程,定量分析了环境温度变化对机组运行经济性的影响,结果表明环境温度变化对机组运行经济性影响较大,对此,提出了控制风机群运行状态以达到经济运行的目的. 相似文献
11.
12.
O. O. Milman A. V. Kondratev A. V. Ptakhin S. N. Dunaev A. V. Kirjukhin 《Thermal Engineering》2016,63(5):313-318
Results of experimental investigations of operation modes of air-cooled condensers (ACC) under design and varying duty conditions are presented. ACCs with varying cooling airflow rates under constant heat load and with constant cooling airflow under varying heat load are examined. Diagrams of heat transfer coefficients and condensation pressures on the heat load and cooling airflow are obtained. It is found that, if the relative heat load is in the range from 0.6 to 1.0 of the nominal value, the ACC heat transfer coefficient varies insignificantly, unlike that of the water-cooled surface condensers. The results of the determination of “zero points” are given, i.e., the attainable pressure in air-cooled condensing units (ACCU), if there is no heat load for several values of working water temperature at the input of water-jet ejectors and liquid ring vacuum pump. The results of the experimental determination of atmospheric air suction into the ACC vacuum system. The effect of additional air suctions in the steam pipe on ACCU characteristics is analyzed. The thermal mapping of ACC heat exchange surfaces from the cooling air inlet is carried out. The dependence of the inefficient heat exchange zone on the additional air suction into the ACC vacuum system is given. It is shown that, if there is no additional air suction into the ACC vacuum system, the inefficient heat exchange zone is not located at the bottom of the first pass tubes, and their portion adjacent to the bottom steam pipe works efficiently. Design procedures for the ACC varying duty of capacitors are presented, and their adequacy for the ACCU varying duty estimation is analyzed. 相似文献
13.
14.
分析了直接空冷凝汽器机组的特点,一些关键问题及预防措施,简要介绍了漳山发电空冷系统的设备及运行状况。 相似文献
15.
直接空冷机组防冻控制策略研究 总被引:2,自引:1,他引:1
在介绍直接空冷系统运行特点的基础上,对直接空冷机组的控制逻辑进行了分析,并针对目前直接空冷系统在防冻、节能方面的控制策略的设计和技术改革提出了建议。针对空冷凝汽器冻结的主要原因,提出了控制运行参数,在停机过程中合理调整冷却风机组的运行方式,退出部分空冷凝汽器,投入旁路系统以增加空冷岛的进汽量等措施。 相似文献
16.
17.
18.