Surface and Biological Activity of Some Novel Cationic Surfactants

In this study, steps were taken toward the development of bactericidal and fungicidal synthetic cationic surfactants by reacting decyl, dodecyl or tetradecyl amine with acetic or hydrochloric acid to produce a series of amine salts which consequently converted to copper or cobalt cationic complexes via complexing the first series compounds with copper (II) or cobalt (II) ions. Surface properties such as interfacial tension and emulsifying power of these surfactants were investigated. The surface parameters including critical micelle concentration (CMC), maximum surface excess (Γ_max) and minimum surface area (A _min) were studied. Free energy of micellization (ΔG°_mic) and adsorption (ΔG°_ads) were calculated. The antimicrobial activity was determined via the inhibition zone diameter of the prepared compounds, which measured against five strains of a representative group of microorganisms. FTIR spectra, elemental analysis and H¹ NMR spectrum were performed to confirm compound structure and purity.

Characterization,surface properties and biological activity of new prepared cationic surfactants

Three cationic surfactants were prepared. A condensation reaction between dimethylaminopropylamine (DMAPA) and benzaldehyde was performed. The produced Schiff base was quaternization with three fatty alkyl bromide with different carbon chain length separately to form the desired cationic surfactants. The chemical structure of synthesized cationic surfactants was confirmed by FTIR, ¹H NMR and mass spectroscopy. It was found that the chemical structure of prepared compounds has an effect on surface properties, where increasing the hydrophobic chain length decrease the values of CMC, Г_max while A_min value was increased. The thermodynamic parameters showed that adsorption and micellization processes are spontaneous. It is clear that the prepared cationic surfactants at first tend to adsorb at surface, then it aggregate to form micelle. The prepared surfactants showed good biological activity against gram positive and negative bacteria and fungi in the following order of II (C12) > I (C10) > III (C16). The serial dilution method was used to evaluate the inhibiting effect of these compounds on the sulfate reducing bacteria growth.     

Surface and Biological Activity of Organoammonium Hydrogen Selenite Surfactants

In this article we show steps taken toward the development of bactericidal and fungicidal synthetic cationic surfactants by the reaction of decyl, dodecyl or tetradecyl amine with selenious acid to produce a series of quaternary ammonium salts which consequently converted to copper and cobalt cationic complexes via complexing them with copper (II) or cobalt (II) ions. Surface properties of these surfactants were investigated. The surface properties studies included critical micelle concentration (CMC), maximum surface excess (Γ_max) and minimum surface area (A _min). Free energy of micellization ( ) and adsorption () were calculated. The antimicrobial activity was determined via the inhibition zone diameter of the prepared compounds measured against five strains of a representative group of microorganisms. FTIR spectra, elemental analyses and ¹ H-NMR spectra were obtained to insure the purity of the prepared compounds

Synthesis,surface, thermodynamic properties and Biological activity of dimethylaminopropylamine surfactants

The chemical structure of the prepared cationic surfactants which formed through condensation reaction between dimethylaminopropylamine (DMAPA) and butyraldehyde then quaternized by three fatty alkyl bromide was confirmed by FTIR, ¹HNMR and mass spectroscopy. The chemical structure of prepared compounds has an effect on surface properties. By increasing the hydrophobic chain length, the values of CMC and Г_max decrease while A_min value was increased. The Thermodynamic parameters showed that adsorption and micellization processes are spontaneous. It is clear that the prepared cationic surfactants tend to adsorb at surface, then it aggregate to form micelle. The prepared surfactants showed good biological activity against Gram-positive and negative bacteria and fungi. The prepared cationic surfactant showed aggressive effect on the sulfate reducing bacteria growth.     

Pyrazole Derived Cationic Surfactants and their Tin and Copper Complexes: Synthesis,Surface Activity,Antibacterial and Antifungal Efficacy

Five membered heterocyclic cationic 3-pyrazolium surfactants namely: 2-[2-(alkyloxy)-2-oxoethyl]-3-methyl-5-oxo-1-phenyl-4,5-dihydro-1H-3-pyrazolium bromide (decyl-; dodecyl-) and their copper and tin complexes were synthesized, their structures were confirmed using different spectroscopic tools. The IR spectra of the metal complexes showed that these compounds exhibit a tetrahedron structure with the transition metal ion (M²⁺) at the center and the cationic ligands arranged in the apexes, while the halide ions in the center. The synthesized compounds were evaluated as biocides against different types of bacteria and fungi. The biological activity data showed that the cationic surfactants exhibit moderate to high efficacy against the tested microorganisms (either bacteria or fungi). While, complexation of these cationic surfactants with Cu (II) and Sn (II) ions the antimicrobial activity was strongly increased. The surface activity of these compounds were discussed and correlated to their chemical structure and the type of substituents on the heterocyclic moiety. Meanwhile, the antimicrobial assay was correlated to the surface activities of the synthesized compounds.     

Surface Properties,Thermodynamic Aspects and Antimicrobial Activity of Some Novel Iminium Surfactants

Novel iminium compounds namely p-benzylidene benzyldodecyl iminium chloride (I), p-benzylidene benzylhexadecyl iminium chloride (II), p-benzylidene benzyloctadecyl iminium chloride (III) were prepared and characterized using FTIR, ¹H-NMR and mass spectroscopy. The surface properties such as surface and interfacial tension, and biological activity of these surfactants were investigated. The surface parameters including critical micelle concentration, maximum surface excess, and minimum surface area. Efficiency and effectiveness were calculated, as well as free energies of micellization and adsorption. The prepared cationic surfactants exhibit a better biological activity than the used reference cetyl trimethyl ammonium bromide.     

Biological Behaviors of Guanidine-Based Cationic Surfactants

The biological properties of novel guanidine‐based cationic surfactant including mono‐alkylguanidine (CnG), N,N,N′‐dimethyl alkylguanidine (CnMG), dicephalic guanidine surfactant (CnGQ), heterogemini guanidine surfactant (diCnGQ) were investigated. Antimicrobial activity was determined via the inhibition of cell viability of the prepared compounds, which was measured against three strains of a representative group of microorganisms. The inhibitions of cell viability were basically about 90 % at the concentration of 25 mg L^?1 to alkyl guanidium salts (CnG, CnMG), and higher than 95 % at a concentration of 10 mg L^?1 to dicephalic guanidine surfactants (CnGQ) and heterogemini guanidine surfactants (diCnGQ). The interactions of bovine serum albumin (BSA) with guanidine surfactants were investigated by fluorescence technology and the effect on BSA conformation follow the order: diC12GQ > C12GQ > C12G > C12MG. At any particular concentration, the biological activity depends on the alkyl chain length to any series of guanidine‐based cationic surfactants.     

Surface Parameters and Biological Activity of <Emphasis Type="Italic">N</Emphasis>-(3-(Dimethyl Benzyl Ammonio) Propyl) Alkanamide Chloride Cationic Surfactants

Three cationic surfactants containing amide groups were prepared by quaternization of dimethylaminopropylamine with benzyl chloride. FTIR and ¹H-NMR spectroscopy were used to confirm the chemical structure of the prepared cationic surfactants. The surface parameters were estimated using surface tension measurements at three different temperatures. The prepared cationic surfactant showed a lower CMC than conventional cationic surfactants. Thermodynamic parameters of adsorption and micellization depend mainly of alkyl chain length and temperature. The adsorption process is more favorable than micellization. The biological activity of the three surfactants was estimated using inhibition zone showing that amidoamine cationic surfactants have good activity and the surfactants C12Bn is the most effective one.     

Synthesis, surface-active properties, and antimicrobial activities of new double-chain gemini surfactants

A novel series of neutral and cationic dimeric surfactants were prepared involving ketalization reaction, Williamson etherification, and regioselective oxirane ring opening with primary and tertiary alkyl amines. The critical micelle concentration (CMC), effectiveness of surface tension reduction (gamma(CMC)), surface excess concentration (Gamma), and area per molecule at the interface (A) were determined and values indicate that the cationic series is characterized by good surface-active and self-aggregation properties. For the first time, we reported the antimicrobial activities against representative bacteria and fungi for dimeric compounds. The antimicrobial activity was found to be dependent on the target microorganism (Gram-positive bacteria > fungi > Gram-negative bacteria), as well as both the neutral or ionic nature (cationic > neutral) and alkyl chain length (di-C(12) > di-C(18) > di-C(8)) of the compounds. The cationic di-C(12) derivative was found to have equipotent activity to that of benzalkonium chloride (BAC) used as standard.     

Screening for Potential Antimicrobial Activities of Some Cationic Uracil Biocides Against Wide-Spreading Bacterial Strains

Eight novel uracil-based cationic surfactants containing Schiff base species were synthesized and characterized using elemental analysis, FTIR, ¹H-NMR and ¹³C-NMR spectroscopy. The surface activities of the synthesized Schiff bases and their cationic derivatives were determined based on interfacial tension measurements and partition coefficient values in water/octanol system. The synthesized Schiff bases and their cationic derivatives were evaluated as novel biocides against different bacteria and fungi strains. The results showed that the biocidal activity of the synthesized Schiff bases was considerably increased by quaternization. The influence of the cationic surfactants as biocides was increased by increasing the hydrophobic chain length and the presence of the methoxy groups. The biocidal activity was also increased by increasing the partition coefficient in water/octanol system. The structure and surface activity/biocidal activity of the different compounds were discussed.     

Synthesis and Characterization of Multifunctional Surfactants in Oil-Field Protection Applications

A series of cationic surfactants was prepared using economical raw materials. The chemical structures of the prepared compounds were confirmed using elemental analysis, FTIR and ¹H-NMR spectra, and melting point determination. The synthesized surfactants were evaluated as oil-field protective additives. In this regard, several surface properties of the synthesized surfactants were studied including surface tension, critical micelle concentration, effectiveness, efficiency, maximum surface excess and minimum surface area. The results obtained from the surface activity measurements were correlated to their chemical structures. The emulsification power measurements for solutions of these surfactants showed their low emulsifying tendency towards paraffin and crude oil. The synthesized surfactants also exhibited high biocidal activity towards gram-positive and gram-negative bacteria and fungi. This activity was increased by increasing the hydrophobic chain length. The corrosion inhibition measurement of these surfactants for mild steel alloys in acidic media using a weight loss technique showed good protection of mild steel alloys against acidic environments. These properties qualify the synthesized compounds as economical oil-field protective additives.

Lipopeptidic surfactants: I. Neutral N-lauroyl-I-arginine dipeptides from pure amino acids

Neutral N^α-lauroyl-dipeptides such as N^α-lauroyl arginylglycine and N^α-lauroyl-arginylphenylalanine as methyl ester (cationic surfactants) and free acid (amphoteric surfactants) derivatives have been prepared by synthetic methods. Fundamental surfactant properties and antimicrobial activity have been evaluated. The properties of these compounds have been compared to the properties of the monomer derivatives N^α-lauroyl-arginine methyl ester (cationic) and N^α-lauroyl-arginine (amphoteric). These new molecules are very soluble in water, good surfactants, and exhibit a good antimicrobial activity, independently of their ionic character.     

Synthesis and properties of cationic surfactants containing a disulfide bond

Two new cationic surfactants containing a disulfide bond were synthesized, and the physical chemical characteristics and the fundamental surface-active properties were determined. These new surfactants have potential applications in the textile and cosmetic field. These compounds have been prepared by condensation of a commercial N^α,N^α-dimethyl amino betaine with cystine dimethyl ester or cystamine by means of the mixed anhydride method. The study of their properties revealed that these molecules are soluble in water (stable at pH⩽8) and show surface activity with similar low critical micelle concentration values. Microscopic examination of water/surfactant systems containing these compounds shows that they form liquid crystals with patterns corresponding to typical hexagonal and lamellar structures.     

Synthesis and Evaluation of Bis-quaternary-Based Surfactants as Additives for Water-Based Mud

Two series of cationic gemini surfactants, alkanediyl-α,ω-bis[N,N-dimethyl alkyl (octyl or dodecyl)ammonium] dibromide (R-s-R; s = 6, 10, 12 and R = 8 and 12) were prepared and evaluated as additives for water-based mud. The chemical structures of the prepared surfactants were confirmed using FTIR and mass spectroscopy. Surface activity of these compounds has been studied and their surface properties including surface tension, emulsification power, critical micelle concentration, effectiveness, maximum surface excess and minimum surface area were determined. The results showed that the prepared compounds have significant surface activity, especially those of longer hydrophobic chain length. The prepared cationic gemini surfactants were evaluated as viscosifiers and filter loss additives for water-based mud formulated from local Na-montmorillonite clay. XRD analysis was carried out to the Na-montmorillonite clay to determine the interaction of the surfactants with inter layers of the clay structure. Rheological properties, gel strength, thixotropy, filtration properties and the effect of temperature on rheological properties of the water-based mud were studied. The results indicated that the gemini surfactants have a positive effect on the rheological and filtration properties of the Na-montmorillonite clay according to American Petroleum Institute specifications.     

Synthesis and Antibacterial Activity of Novel Amido-Amine-Based Cationic Gemini Surfactants

A series of novel cationic gemini surfactants were synthesized from corresponding amido-amines in a single step reaction. The amido-amines were obtained from long chain carboxylic acids and 3-N,N-dimethylamino-1-propyl-amine with excellent isolated yield (up to 95 %). All the synthesized quaternary ammonium compounds (QACs) were further investigated for surface active properties. The critical micelle concentration (CMC) and the effectiveness of surface tension reduction were determined. The surface tension measurements of newly synthesized gemini surfactants showed good water solubility, and low CMC values, had great efficiency in lowering the surface tension and a strong adsorption at the air/water interface than the corresponding monomeric surfactants. Further, the antibacterial activity of the synthesized QACs against both Gram-positive and Gram-negative bacteria was also investigated.     

Preparation,surface-active properties,and antimicrobial activities of bis-quaternary ammonium salts from amines and epichlorohydrin

A series of new cationic surfactants, bis-quaternary ammonium salts, were prepared from tert-alkylamine and a product of the reaction of epichlorohydrin with decyl- and dodecylamine, and their surface-active properties were measured. Specifically, the critical micelle concentration (CMC), effectiveness of surface tension reduction (γ_CMC), surface excess concentration (Γ), area per molecule at the interface (A), and standard free energies of adsorption (ΔG _ads ^o) and of micellization (ΔG _mic ^o) were determined. All these surfactants showed good water solubility and low CMC, more than one order of magnitude lower than those of corresponding mono-alkylammonium salts. They also showed good foaming properties but worse wetting capabilities. Many of these compounds had antimicrobial activities against gram-positive bacteria (Staphylococcus aureus, Bacillus subtilis) and yeast (Candida albicans), but they were not active against molds.     

Synthesis and some studies on fluorinated cationic surfactants: surface and biocidal activities

Three fluorinated cationic surfactants were prepared by condensing N-(2-bromoethyl)perfluoroalkylamides with stoichiometric amounts of pyridine, triethanolamine, and triethylamine to produce three quaternary ammonium salts. The surface and biocidal properties of these surfactants were investigated to find the relation between the structure of the hydrophilic portion of the compounds and their efficiency as biocides. The properties studied included critical micelle concentration (CMC), effectiveness (II_CMC), surface excess concentration (T_max), and area occupied by a molecule (A_min). Free energies of micellization (ΔG _mic ^o) and adsorption (ΔG _ads ^o) of the surfactants in aqueous solution were calculated. The minimal inhibitory concentrations of the prepared compounds were tested against five strains as representative group of microorganisms.     

Synthesis, Surface-Active Properties, and Anthelmintic Activities of New Cationic Gemini Surfactants Against the Gastrointestinal Nematode, Heligmosomoides polygyrus bakeri, In Vitro

A novel series of cationic dimeric surfactants was prepared involving the ketalization reaction, Williamson etherification, and regioselective oxirane ring opening with tertiary alkyl amines. The synthesized compounds were obtained in high purity by a simple purification procedure using column chromatography. The critical micelle concentration (CMC), effectiveness of surface tension reduction (??_CMC), surface excess concentration (??), and area per molecule at the interface (A) were determined and values indicate that the cationic series is characterized by good surface-active and self-aggregation properties. For the first time, we reported the anthelmintic activities against the rodent gastrointestinal nematode Heligmosomoides polygyrus bakeri, in vitro for cationic gemini compounds. In the series of five tested cationic compounds (4a?Ce), three of them (4a, 4b and 4d) were shown to have an excellent anthelmintic activity in vitro at different concentrations. The anthelmintic activity was found to be dependent on the type of cationic compound, concentration and incubation time. The cationic di-C₁₂ (4a) derivate of the series was the best anthelmintic agent, its use was optimal at a minimum concentration of 50?ppm and with 60?min of incubation.     

Preparation and Application of Fluorinated Cationic Surfactants

Four fluorinated cationic surfactants were prepared by condensing 2,2,3,3, tetrafluoro-1-propyl chloroacetate with stoichiometric amounts of pyridine, 2-hydroxypyridine, 8-hydroxyquinoline and 8-hydroxyquinaldine to produce four quaternary ammonium salts. The surface and biocidal properties of these surfactants were investigated. Surface properties of their solutions including surface tension, critical micelle concentration (CMC), effectiveness (Π_cmc), maximum surface excess (Γ_max) and minimum surface area (A _min) were investigated with respect to different concentrations at 25 °C. Standard free energies of micellization and adsorption of the prepared surfactants in the aqueous solution were studied. The biocidal activity was determined via the inhibition zone diameter of prepared compounds which tested against six strains as a representative group of microorganisms.

Preparation,Characterization and Properties of Novel Cationic Gemini Surfactants with Rigid Amido Spacer Groups

A series of novel cationic gemini surfactants with rigid amido groups inserted as the spacers, named C ₁₂ ‐PPDA‐C ₁₂ , C ₁₄ ‐PPDA‐C ₁₄ and C ₁₆ ‐PPDA‐C ₁₆ , were synthesized by a two‐step reaction with dimethyl terephthalate, N,N‐dimethyl propylene diamine and alkyl bromide as raw materials. The chemical structures of the prepared compounds were confirmed by IR, ¹H and ¹³C NMR and element analysis. Surface activity properties of the synthesized compounds were investigated by surface tension, electrical conductivity and fluorescence. Increasing the number of carbon atoms in the hydrophobic alkyl chain, decreased the critical micelle concentration (CMC), surface tension at the CMC and the minimum surface area. Other relevant properties including foaming ability and emulsion stability were investigated. The results indicated that the synthesized gemini surfactants possess good surface properties, emulsifying properties and steady foam properties.