Electrospray Ionization Mass Spectrometry Characterization of Musts and Alembic Brazilian Cachaças Using Selected Yeast Strains

The choice of fermentation system during cachaça production can greatly influence the chemical composition of the beverage. In this work, Saccharomyces cerevisiae strains were selected based on fermentative properties and used as starters to produce alembic cachaça. In distillery scale production, the selected yeast strains exhibited greater adaptiblity to the fermentation environment and hence remained predominant throughout the process. Electrospray ionization mass spectrometry in the negative ion mode revealed that most of the compounds present in the must are different from those formed in the distillate for both cachaças obtained from spontaneous and selected strains. However, beverages produced using selected strains showed greater similarity in chemical profiles than those produced from spontaneous strain fermentation. Moreover, a smaller number of ions were detected in beverages produced by selected strain than from spontaneous strain fermentation. Our results indicate that the selected S. cerevisiae strains evaluated are able to produce cachaças less subject to variation in chemical composition. This could potentially improve brand consistency and thus commercial viability, particularly in the international market.     

d-Xylose consumption by nonrecombinant Saccharomyces cerevisiae: A review

Xylose is the second most abundant sugar in nature. Its efficient fermentation has been considered as a critical factor for a feasible conversion of renewable biomass resources into biofuels and other chemicals. The yeast Saccharomyces cerevisiae is of exceptional industrial importance due to its excellent capability to ferment sugars. However, although S. cerevisiae is able to ferment xylulose, it is considered unable to metabolize xylose, and thus, a lot of research has been directed to engineer this yeast with heterologous genes to allow xylose consumption and fermentation. The analysis of the natural genetic diversity of this yeast has also revealed some nonrecombinant S. cerevisiae strains that consume or even grow (modestly) on xylose. The genome of this yeast has all the genes required for xylose transport and metabolism through the xylose reductase, xylitol dehydrogenase, and xylulokinase pathway, but there seems to be problems in their kinetic properties and/or required expression. Self-cloning industrial S. cerevisiae strains overexpressing some of the endogenous genes have shown interesting results, and new strategies and approaches designed to improve these S. cerevisiae strains for ethanol production from xylose will also be presented in this review.     

Characteristics of wines fermented with different Saccharomyces cerevisiae strains isolated from the La Mancha region

One hundred and seventy-four strains of Saccharomyces cerevisiae from musts in fermentation were characterized using pulsed-field gel electrophoresis. Of these, 13 strains were selected for their good oenological properties and were used as inocula in laboratory-scale fermentation of an Airén must. Volatile compound and amino acid content of the resulting wines was analysed. Factorial principal component analysis of the data revealed differences between wines according to the strain used in the fermentation. Strains that produce more volatile compound and have an adecuated nitrogen assimilation are recommended to obtain quality wines.     

Yeasts Isolated from the Alcoholic Fermentation of Agave duranguensis During Mezcal Production

Mezcal is a spirit produced in some regions of México. In the state of Durango, mezcal is produced via traditional fermentation of the Agave duranguensis plant. To better understand traditional fermentation processes, it is necessary to know which yeast species are present in fermentations in different producer regions. The aim of this research was to study yeasts involved in traditional mezcal fermentation in Durango, México, and investigate the phylogeny of the native Saccharomyces cerevisiae strains involved in this process. The 5.8S-ITS genomic region was analyzed to identify strains present in the fermentation process samples in this study. To differentiate strains belonging to the genus Saccharomyces, different molecular techniques were used, including analysis of mitochondrial DNA and δ elements and sequencing of the 5.8S-ITS genomic region. Although a high diversity of microorganisms was found at the beginning of fermentation, Saccharomyces cerevisiae was the only yeast present at the end of fermentation in region I, while Torulaspora delbrueckii was found in a higher number than S. cerevisiae at the end of fermentation in the region II. Molecular techniques demonstrated that Saccharomyces cerevisiae isolated in Durango are phylogenetically independent from the strains isolated in other regions of Latin America and Europe.     

Solid-state fermentation by S. cerevisiae with high resistance to ferulic acid improves the physicochemical properties of wheat bran and quality of bran-rich Chinese steamed bread

Wheat bran has numerous health benefits, but its poor processing and sensory properties limit its application in the staple food industry. Fermentation by S. cerevisiae changes the performance of wheat bran. However, high levels of ferulic acid (FA) inhibit S. cerevisiae. The effects of solid-state fermentation of S. cerevisiae with high resistance to FA on the physicochemical properties of wheat bran and the quality of bran-rich Chinese steamed bread (CSB) were investigated. The results showed that the growth of S. cerevisiae was inhibited by FA in a dose-dependent manner. Short-term adaptation strategies efficiently improved the tolerance of S. cerevisiae to FA stress. Compared with the parental strain (PS), fermentation of the short-term adapted strains (adapted strains) significantly increased the FA, total phenol, and soluble dietary fiber content in wheat bran. Wheat bran fermented by the adapted strains had a higher antioxidant capacity than wheat bran fermented by PS. In addition, compared with the PS, the wheat bran fermented by the adapted strains can decrease the hardness, improve the specific volume, and the quality of CSB. Thus, solid-state fermentation of the adapted strain is a potentially effective method to improve the nutritional and physicochemical properties of wheat bran as a cereal food ingredient.     

Selection of indigenous Saccharomyces cerevisiae strains for Nero d'Avola wine and evaluation of selected starter implantation in pilot fermentation

The present research studied Saccharomyces cerevisiae yeasts isolated from Nero d'Avola grapes, collected in different areas of the Sicily region. RAPD-PCR analysis with M13 primer was used for preliminary discrimination among 341 S. cerevisiae isolates. Inoculated fermentations with S. cerevisiae strains, exhibiting different RAPD-PCR fingerprinting, revealed the impact of selected strains on volatile compound concentration. Two selected strains were used in fermentation at cellar level and the restriction analysis of mtDNA on yeast colonies isolated during fermentation was used to control strain implantation. This study represents an important step to establish a collection of indigenous S. cerevisiae strains isolated from a unique environment, such as Nero d'Avola vineyards. Different starter implantation throughout inoculated fermentation represents an additional character, which might be considered during the selection program for wine starter cultures.     

Use of PCR‐DHPLC (Polymerase Chain Reaction—Denaturing High Performance Liquid Chromatography) for the Rapid Differentiation of Industrial Saccharomyces pastorianus and Saccharomyces cerevisiae Strains

Strain specific detection and control of Saccharomyces pastorianus and Saccharomyces cerevisiae starter cultures is of great importance for the fermentation industry. The preconditions of strain specific fermentation characteristics can be ensured by periodic analysis and confirmation of the strain identity. With regard to industrial S. pastorianus and S. cerevisiae strains and a focus on brewing strains, the differentiation methods most available are time‐consuming and not very discriminative. In this work PCR‐DHPLC analysis was investigated as a novel approach for the differentiation of industrially used S. pastorianus and S. cerevisiae strains. The PCR‐DHPLC‐system was specific for S. cerevisiae strains and S. pastorianus hybrid strains that contain IGS2 rDNA, which originates from the S. cerevisiae ancestor. For the DNA of 177 strains of 41 non‐target species, which are typical for beverage and fermentation surroundings, the absence of PCR‐amplificates could be confirmed by DHPLC analysis. It was shown that single strains of S. cerevisiae and S. pastorianus could be differentiated. A strain specific differentiation within the group of top‐fermenting Saccharomyces cerevisiae strains could also be performed. For the group of bottom fermenting S. pastorianus brewing strains, strain‐to‐strain specific differences in the DHPLC chromatograms could be observed which can be used to differentiate and to compare two single strains with each other, although the comparison of chromatograms of an unknown S. pastorianus strain with a set of known S. pastorianus chromatograms could only reveal tendencies towards grouping into types. The differential DHPLC chromatogram characteristics (fluorescence intensities, number of peaks/side‐peaks/peak‐shoulders) within S. pastorianus are present, but not as distinctive as for S. cerevisiae. Additionally PCR‐DHPLC has advantages compared to other differentiation methods, such as species specificity, speed (2.5 h for one sample) and precision with the described limits.     

Saccharomyces cerevisiae and Hanseniaspora uvarum mixed starter cultures: Influence of microbial/physical interactions on wine characteristics

The growing trend in the wine industry is the revaluation of the role of non-Saccharomyces yeasts, promoting the use of these yeasts in association with Saccharomyces cerevisiae. Non-Saccharomyces yeasts contribute to improve wine complexity and organoleptic composition. However, the use of mixed starters needs to better understand the effect of the interaction between these species during alcoholic fermentation. The aim of this study is to evaluate the influence of mixed starter cultures, composed by combination of different S. cerevisiae and Hanseniaspora uvarum strains, on wine characteristics and to investigate the role of cell-to-cell contact on the metabolites produced during alcoholic fermentation. In the first step, three H. uvarum and two S. cerevisiae strains, previously selected, were tested during mixed fermentations in natural red grape must in order to evaluate yeast population dynamics during inoculated fermentation and influence of mixed starter cultures on wine quality. One selected mixed starter was tested in a double-compartment fermentor in order to compare mixed inoculations of S. cerevisiae/H. uvarum with and without physical separation. Our results revealed that physical contact between S. cerevisiae and H. uvarum affected the viability of H. uvarum strain, influencing also the metabolic behaviour of the strains. Although different researches are available on the role of cell-to-cell contact-mediated interactions on cell viability of the strains included in the mixed starter, to our knowledge, very few studies have evaluated the influence of cell-to-cell contact on the chemical characteristics of wine.     

Influence of sequential inoculum of Starmerella bacillaris and Saccharomyces cerevisiae on flavonoid composition of monovarietal Sangiovese wines

The selection of Starmerella bacillaris strains to be used with Saccharomyces cerevisiae as mixed cultures has been recently suggested in order to produce wines containing lower ethanol and higher glycerol concentrations and to promote fructose degradation due to their fructophilic character. However, studies about effects of such mixed starter cultures on phenolic compounds, which are responsible for the colour and health-enhancing properties in red wines, are currently lacking. Therefore, in this work, the influence of sequential inoculated fermentation (SIF) with Starm. bacillaris and S. cerevisiae on phenolic content of monovarietal Sangiovese wine was evaluated by fermentations at laboratory scale. Axenic fermentations (AXFs) with S. cerevisiae were performed as control. S. cerevisiae attained higher cell densities in AXF compared with SIF. The experimental wines obtained by SIF showed significant lower ethanol and higher glycerol concentrations, whereas no significant difference was detected in colour intensity. The total phenol index reached significantly lower values in SIF. Furthermore, the wines produced by SIF contained higher concentrations of vitisin A that has a greater colour stability than the anthocyanin monomer. Finally, a lower content of both free anthocyanins and flavan-3-ols, key compounds for wine quality possessing also health-enhancing properties, was found in wines obtained by SIF. On the contrary, no significant difference was detected on flavonol concentration between SIF and AXF. This study highlighted that the use of sequential inoculum of Starm. bacillaris and S. cerevisiae can contribute to increasing the colour stability of red wines, even if at the expense of compounds with health properties.     

Composition of Saccharomyces cerevisiae strains in spontaneous fermentations of Pinot Noir and Chardonnay

There is a lack of knowledge about the composition of Saccharomyces cerevisiae strains in spontaneous fermentations of Pinot Noir and Chardonnay cultivars. The objectives were to determine the relative abundance of indigenous and commercial S. cerevisiae strains in spontaneous fermentations at three wineries from the two cultivars and to compare the composition of the S. cerevisiae strains between cultivars and wineries. Three fermentation vessels were sampled at three stages of fermentation for each cultivar at each winery. Isolates were identified to the strain level using seven microsatellite loci. Commercial S. cerevisiae strains were isolated at a frequency higher than that of the indigenous strains at each winery for both cultivars. The composition of S. cerevisiae strains was different for each cultivar and at each winery. Our results illustrate the clear influence of inoculated commercial active dry yeast strains on the composition of S. cerevisiae strains in spontaneous fermentations at wineries conducting both inoculated and spontaneous fermentations.     

Fermentation Characteristics and Aromatic Profile of Plum Wines Produced with Indigenous Microbiota and Pure Cultures of Selected Yeast

The aim of this study was to assess and compare fermentation characteristics and aromatic profile of plum wines produced with indigenous microbiota and pure cultures of different selected yeast. Experiments were carried out with plum (Prunus domestica L.) varieties of different fruit ripening times (?a?anska rana, ?a?anska lepotica, and Po?ega?a). Wine fermentations were conducted by the activity of indigenous microbiota, commercially available Saccharomyces cerevisiae and Saccharomyces bayanus yeast strains and joint activity of Schizosaccharomyces pombe and S. cerevisiae (sequential inoculation). Statistically significant differences in fermentative characteristics and the content of certain volatile compounds were observed as a result of metabolic activity of various indigenous and/or selected yeasts during fermentation of plum pomace. Minimal duration of fermentation (4 to 5 d) and fastest ethanol production rate (from 12.3 to 15.5 g/L/d) were the characteristics of the studied S. cerevisiae strains. Isobutanol, 3‐methyl‐1‐butanol, 1‐heptanol, and 1‐octanol were the most prevalent higher alcohols in the tested plum wine samples. The predominant ester in plum wines was ethyl acetate, ethyl lactate, amyl acetate, isoamyl acetate, and ethyl palmitate, esters responsible for the floral and fruity olfactory tones, were also present in large amounts. Also, the use of S. cerevisiae strains resulted in the production of plum wines with better sensory characteristics than ones produced with other investigated yeasts. Obtained results are significant since there is limited data on the compounds responsible for the unique flavor of plum wine, as well as on the impact of different yeast starter cultures application on the overall quality of fruit wines.     

Construction of self-cloning industrial brewing yeast with high-glutathione and low-diacetyl production

Self‐cloning strains of industrial brewing yeast were constructed, in which one allele of α‐acetohydroxyacid synthase (AHAS) gene (ILV2) was disrupted by integrating Saccharomyces cerevisiae genes, γ‐glutamylcysteine synthetase gene (GSH1) and copper resistant gene (CUP1) into the locus of ILV2. The self‐cloning strains were selected for their resistance to CuSO₄ and identified by PCR amplification. The results of AHAS and glutathione (GSH) assay from fermentation with the self‐cloning strains in 500‐mL conical flask showed that AHAS activity decreased and GSH content increased compared with that of host yeasts. The results of pilot scale brewing in 5‐L fermentation tank also indicated that GSH content in beer fermented with self‐cloning strains T5‐3 and T31‐2 was 1.3 fold and 1.5 fold of that of host QY5 and QY31, respectively; and diacetyl content decreased to 64% and 58% of their hosts, respectively. The self‐cloning strains do not contain any heterologous DNA, they may be more acceptable to the public.     

Immunization of the industrial fermentation starter culture strain of Saccharomyces cerevisiae to a contaminating killer toxin-producing Candida tropicalis

K3 killer trait was introduced into the fermentation starter strain of Saccharomyces cerevisiae BSP 1 in order to construct immune industrial strain that produces K3 type killer toxin and was resistant to Candida tropicalis (K⁺) contamination. Protoplasts of respiration-deficient Rho^o strain of S. cerevisiae NCYC 761 (K3) and S. cerevisiae BSP 1 were fused. The resulting respiration-competent hybrid with K3 type killer activity was selected on media containing a non-fermentable carbon source and by a killer zone assay in a plate test, respectively. The fusant was similar to the parent strain in its fermentation and sugar utilization patterns, growth rate, dough-raising properties and osmotolerance. The newly constructed S. cerevisiae BSP 1 (K3) inhibited the growth of C. tropicalis in a pH range from 3.5 to 5.0 and over a temperature range of 20–30°C.     

Effect of grape indigenous Saccharomyces cerevisiae strains on Montepulciano d'Abruzzo red wine quality

The growth of selected, indigenous Saccharomyces cerevisiae added as starters (SRS1, MS72 and RT73) was monitored during Montepulciano d'Abruzzo wine production. In all the fermentations the addition of the starter, caused a decrease of the non-Saccharomyces yeasts. When strains MS72 and RT73 were used as starters they were detected in the first phases of fermentations, while strain SRS1 competed successfully with native yeasts during all the process. Wines obtained by fermentation with the indigenous starters showed some different characteristics, according to the chemical and sensory analyses. This study highlighted that among selected starters with high fermentative capacity, some are able to dominate better than other natural wine yeast biota, whereas some strains can interact and survive besides native yeast populations during the fermentation. As a consequence, the dominance character can have a positive or negative effect on wine quality and has to be considered in the frame of yeast selection in order to improve or characterize traditional wines. Winemakers could choose among different degrees of yeast dominance to modulate the interaction among starter and native wine yeast population.     

ANTIGENIC STRUCTURE OF BREWING YEASTS AND ITS RELATIONSHIP TO NON-SEROLOGICAL METHODS OF CLASSIFICATION

Antigen extracts of 43 brewing strains of Saccharomyces cerevisiae were examined using micro immuno-electrophoresis. The data obtained was analysed by numerical taxonomic techniques and a serological classification of brewing yeasts was constructed based on the results. This classification is compatible with our earlier taxonomic study based on characters of practical brewing importance.⁵ Significant relationships were observed between certain antigens and the fermentation properties of head formation and deposit formation.     

Effects of mediums on fermentation behaviour and aroma composition in pure and mixed culture of Saccharomyces cerevisiae with Torulaspora delbrueckii

The nutrient status and composition in mediums have a significant effect on yeast metabolism and phenotypic characteristics in wine fermentation. In this study, the effects of three frequently used mediums, including synthetic grape juice (SGJ), grape juice without grape pericarp and seeds (GJ) and grape must with grape pericarp and seeds (GMPS), on yeast fermentation behaviour and aroma compounds produced by pure and mixed culture of Saccharomyces cerevisiae T73 with Torulaspora delbrueckii TD20 were investigated after alcoholic fermentation. The results showed that high fermentation activities and cell population were always found in GJ medium irrespective of inoculated approach. More esters and higher alcohols were produced in GMPS medium fermented by pure S. cerevisiae, while SGJ medium had increased levels of fatty acids. Consistent with previous literatures, the mixed fermentation of T. delbrueckii and S. cerevisiae produced more acetate esters and fatty acids than the pure culture of S. cerevisiae, while this enological trait was only found in SGJ and GJ, not in GMPS. Our results highlighted that more attention should be paid to the fermentation medium when evaluating the enological and aromatic properties of selected yeasts used in industrial winemaking. In this regard, the combined use of GJ and GMPS medium might be a suitable choice.     

Effect of Initial PH on Growth Characteristics and Fermentation Properties of Saccharomyces cerevisiae

As the core microorganism of wine making, Saccharomyces cerevisiae encounter low pH stress at the beginning of fermentation. Effect of initial pH (4.50, 3.00, 2.75, 2.50) on growth and fermentation performance of 3 S. cerevisiae strains Freddo, BH8, Nº.7303, different tolerance at low pH, chosen from 12 strains, was studied. The values of yeast growth (OD₆₀₀, colony forming units, cell dry weight), fermentation efficiency (accumulated mass loss, change of total sugar concentration), and fermentation products (ethanol, glycerol, acetic acid, and l ‐succinic acid) at different pH stress were measured. The results showed that the initial pH of must was a vital factor influencing yeast growth and alcoholic fermentation. Among the 3 strains, strain Freddo and BH8 were more tolerant than Nº.7303, so they were affected slighter than the latter. Among the 4 pH values, all the 3 strains showed adaptation even at pH 2.50; pH 2.75 and 2.50 had more vital effect on yeast growth and fermentation products in contrast with pH 4.50 and 3.00. In general, low initial pH showed the properties of prolonging yeast lag phase, affecting accumulated mass loss, changing the consumption rate of total sugar, increasing final content of acetic acid and glycerol, and decreasing final content of ethanol and l ‐ succinic acid, except some special cases. Based on this study, the effect of low pH on wine products would be better understood and the tolerance mechanism of low pH of S. cerevisiae could be better explored in future.     

Dominance and influence of selected Saccharomyces cerevisiae strains on the analytical profile of craft beer refermentation

This study investigated the influence of Saccharomyces cerevisiae strains inoculated at the refermentation phase on the analytical profile of craft beer. After preliminary screening of 33 S. cerevisiae strains, four were selected and used in bottle refermentation trials. To attribute the flavour profile of the refermented beers to the inoculated strains, molecular characterization was carried out using a mini‐satellite protocol of amplification with inter‐δ primers. Fingerprinting analysis of 500 isolates showed that all of the inoculated strains used in the bottle refermentation dominated the process. The main analytical characters across the bottle refermentation trials were similar, while there were distinctive and significant variations in the volatile compounds. In particular, when compared with the starter strain used as control, the bottle refermentation trials using the DBVPG 2170, DBVPG 2187 and L951 S. cerevisiae strains showed significantly higher levels of the volatile compounds that are responsible for fruity and flowery aromas (i.e. isoamyl acetate, ethyl octanoate, ethyl dodecanoate phenyl ethyl acetate, β‐phenyl ethanol). This study indicates that the proper refermentation process results in the dominance of the selected starter strain, which produces fermentation compounds that show a specific analytical profile and give the craft beer its distinctive bioflavour. Copyright © 2014 The Institute of Brewing & Distilling     

Increased flavour diversity of Chardonnay wines by spontaneous fermentation and co-fermentation with Hanseniaspora vineae

Discovery, characterisation and use of novel yeast strains for winemaking is increasingly regarded as a way for improving quality and to provide variation, including subtle characteristic differences in fine wines. The objective of this work was to evaluate the use of a native apiculate strain, selected from grapes, Hanseniaspora vineae (H. vineae) 02/5A. Fermentations were done in triplicate, working with 225 L oak barrels, using a Chardonnay grape must. Three yeast fermentation strategies were compared: conventional inoculation with a commercial Saccharomyces cerevisiae strain, ALG 804, sequential inoculation with H. vineae and then strain ALG 804 and spontaneous fermentation. Yeast strain identification was performed during fermentation, in which the apiculate strain was found to be active, until 9% of alcohol in volume, for the co-fermentation and the spontaneous fermentation was completed by three native S. cerevisiae strains. Basic winemaking parameters and some key chemical analysis, such as concentration of glycerol, biogenic amines, organic acids, and aroma compounds were analysed. Sensory analysis was done using a trained panel and further evaluated with professional winemakers. Sequential inoculation with H. vineae followed by S. cerevisiae resulted in relatively dry wines, with increased aroma and flavour diversity compared with wines resulting from inoculation with S. cerevisiae alone. Wines produced from sequential inoculations were considered, by a winemaker’s panel, to have an increased palate length and body. Characteristics of wines derived from sequential inoculation could be explained due to significant increases in glycerol and acetyl and ethyl ester flavour compounds and relative decreases in alcohols and fatty acids. Aroma sensory analysis of wine character and flavour, attributed to winemaking using H. vineae, indicated a significant increase in fruit intensity described as banana, pear, apple, citric fruits and guava. GC analysis of the relative accumulation of 23 compounds to significantly different concentrations for the three fermentation strategies is discussed in relation to aroma compound composition.     

Optimising detection of acidification kinetics diversity in Lactococcus lactis subsp. lactis using SDS‐PAGE protein fingerprinting as screening method

Cell‐free extracts from 157 Lactococcus lactis strains isolated from Artisan cheese were screened by protein fingerprinting previous to their technological characterisation. The strains were classified according to their electrophoretic patterns into five groups. A set of strains representing the different clusters were selected to study their acidifying activity in milk. Time and rate feature points, as well as the shape of the acidification curves, resulted in six different fermentation kinetics, mostly consistent with the electrophoretic groups. Thus, selection of native strains as starter cultures based on their acidifying activity could be optimised by protein fingerprinting.