Magnetic properties of melt spun NdFe10Cr2-Nd0.67B0.33 pseudobinary alloys

The coercivity of the melt-spun pseudobinary (NdFe₁₀Cr ₂)_1-x (Nd₂B)_x alloys, in which Nd₂B represents a composition of Nd_0.67B_0.33, was systematically studied. It was found that significant coercivities are possible with optimal additions of the Nd-B composition at x=0.5-0.7. The as-spun (substrate velocity=10 m/s) coercivity increased from 0.1 kOe at x=0.0 to maxima of 7.0 and 7.5 kOe at x=0.5 and 0.7, due to the Nd₂ Fe₁₄B and a new Fe-Nd phase, respectively, as evidenced from thermomagnetic analysis and X-ray diffraction. Annealing the overquenched amorphous x=0.7 alloy led to the crystallization of the Nd₂Fe₁₄B phase, and a coercivity of 8.5 kOe was obtained     

Sintered Sm2(Co, Fe,Cu,Zr)17 magnets withlight rare earth substitutions

The effects of partial substitution of light rare earths for Sm in (Sm_1-xR_x)₂ (Co,Fe,Cu,Zr)₁₇ have been investigated where R=Ce, Pr, Nd, Pr_0.5Nd _0.5, Ce_0.2Pr_0.4Nd_0.4 and x=0-0.5. Experiments show that both remanence and maximum energy product are improved for x=0.1-0.2, depending upon compositions and heat treatments. For a composition Sm_0.8R_0.2(Co_0.633Fe_0.286 Cu_0.061Zr_0.020)_7.59 with R =Ce_0.2Pr_0.4Nd_0.4, the authors obtained B_r=11.57 kG, _MH_c =15.5 kOe, _BH_c=10.33 kOe, H_k=10.03 kOe, and (BH)_max=30 MGOe     

Hot-pressed Mn-Zn-Ni and Mn-Zn-Co ferrites for magnetic recordingheads

Ni²⁺ and Co²⁺ substituted Mn-Zn ferrites have been developed as high-density magnetic recording materials by hot pressing using optimum sintering parameters. Ferrite series of the composition Mn_0.6Zn_0.4-xNi_xFe₂ O₄ and Mn_0.6Zn_0.4-yCo_yFe₂O₄ were prepared by the hot-pressing technique wherein x and y varied from 0.0 to 0.4 in steps of 0.05. It yielded ferrites with improved magnetic properties having higher hardness (⩾650 Vickers units), low porosity (<0.1%), and small grain size (≈10 μm). The initial permeability increased, whereas the coercive field decreased for an Ni²⁺ concentration x or a Co ²⁺ concentration y equal to 0.05. Maximum values of saturation magnetization equal to 4850 and 5250 G were obtained for x and y equal to 0.225 and 0.275, respectively. The Curie temperature increased appreciably, whereas the DC resistivity decreased for a larger substitution of Ni²⁺ and Co²⁺ ions     

Properties of the W-type hexaferritePbZn2Fe16O27

W-type Pb-hexaferrites were prepared by standard ceramic methods. The lattice constants found by refinement were a=0.59140±0.00006 nm and c=3.29209±0.00041 nm. The X-ray density of a typical composition PbZn_1.9Fe_15.3O_25.8 was ρ=5.32 g/cm³ and the Vickers microhardness value h _v=6 kN/mm². A plot of the saturation magnetization versus temperature is given. The extrapolated value of the saturation magnetization (H→∞, T→0) was σ_s=108 emu×g^-1, and the Curie temperature was T_c=600±20 K     

Analysis of temperature-dependent magnetization in Sm-Fe-Ccompounds using a two-sublattice model

The temperature dependence of magnetization in Sm₃Fe ₂₀C_x (x =0.3, 0.6, 0.8) and Sm₂Fe_16.5C_1.0 intermetallic compounds with rhombohedral structure has been analyzed using molecular field theory. On the basis of a two-sublattice model, the molecular field coefficients are calculated using a numerical fitting method. The Curie temperature and the Fe-Fe, Sm-Fe, Sm-Sm magnetic interaction energies for the compounds are determined from these coefficients. The results show that the increase of the Curie temperature (T_c) with the increase of carbon content x is attributed mainly to the enhancement of the Fe-Fe exchange interaction energy caused by carbon atoms added     

Multirate polynomials prediction with unevenly spaced samples

A method for polynomial prediction with unevenly spaced samples is proposed for dynamic upsampling purposes, frequently needed in digital signal-processing applications. The procedure is based on Newton's divided-difference interpolation formula, which allows prediction along a polynomial of degree n if the samples are arbitrarily spaced. For this purpose, it is necessary to store n+1 latest values pairs (x_i, u_i) where x _i is the time instant when the sample y_i is available. Based on the (x_i, y_i ) pairs, the algorithm predicts y-samples for arbitrary values of x. Noise reduction techniques based on bandwidth limiting are discussed. As an application, a velocity measurement system is considered, based on pulse-width measuring, where the primary interest is in improving the accuracy at very low speeds     

Development of high-quality ceramic powders for Sr0.9Ca0.1Zn2-W type hexagonal ferrite for permanentmagnet devices

Fine ceramic powders of Sr_0.9Ca_0.1Zn₂ Fe₁₆O₂₇ (Sr_0.9Ca_0.1Zn ₂-W) ferrite, of almost single domain grain size ~1 μm, have been synthesized successfully by sintering for a few hours a mixture of SrCO₃, CaCO₃, ZnO, and α-Fe₂ O₃ in stoichiometric amounts at an effectively low temperature (T_s) of ~1100°C. Carbon dioxide evolves in the reaction Sr(Ca)CO₃+2ZnO+8 α-Fe₂D₃ &lrarr2;Sr(Ca)Zn₂Fe₁₆O₂+C₂ , making fine pores in the sample, which prevent large grain growth of the material and result in a very loose powder. The small ⩽10% substitution of Sr by Ca activates the reaction, but preserves the crystallization of the small-sized grains. This yields magnetic properties useful for most permanent magnet applications, with a promisingly high coercivity H_c~3650 Oe and saturation magnetization M_s~65 emu/g. A considerably better saturation magnetization M_s~85 emu/g can be obtained by sintering the samples at higher T_s~1300°C, but that results in a rather very low coercivity H_c~105 Oe     

Grain size dependence of coercivity and permeability innanocrystalline ferromagnets

Amorphous ribbons of composition Fe_74.5-xCu_xNb₃Si_13.5B₉ (x=0, 1 at.%) have been annealed between about 500°C and 900°C. This produced a series of crystallized samples with grain sizes between about 10 nm and 300 nm and with coercivities H _c and initial permeabilities μ_i varying over several orders of magnitude. The best soft magnetic properties (H _c≈0.01 A/cm and μ_i≈80×10³ ) were observed for the smallest grain sized of about 10 nm. With increasing grain size D, coercivity steeply increases following a D⁶-power law (up to D≈50 nm). H_c then runs through a maximum of H_c≈30 A/cm and decreases again for grain sizes above 150 nm according to the well-known 1/D law for polycrystalline magnets. The initial permeability was found to vary in a similar manner, essentially being inversely proportional to coercivity. The variation of the soft magnetic properties with the average grain size is discussed and compared with the predictions of the random anisotropy model and other theories for the magnetization reversal     

Magnetic properties of GdBa2Cu3O7crystals in high magnetic field

The magnetic properties of single crystals of GdBa₂Cu ₃O₇ were investigated in a magnetic field of up to 20 T applied parallel to the c axis in the 1.7-300 K temperature range. In the superconducting state, the field and temperature dependences of the critical current densities were deduced from the hysteresis of the half-cycle using Bean's critical state model. The Gd³⁺ paramagnetic moment was then studied. Above about 20 K, the M(H) isotherms were found to be given, at different temperatures, by the Brillouin function of the free Gd³⁺ ion. Below 20 K, the average magnetization does not obey the Brillouin law. The normal-state susceptibility was described by the free-ion Curie-Weiss law     

Magnetic properties of BaFe12O19 smallparticles

The magnetic properties of small BaFe₁₂O₁₉ particles about 50 nm in size have been studied; the emphasis was on small-size effects. The compound formation of the hexagonal structure was made at a relatively low temperature; the small particle size made this result possible. As compared to the bulk value, a significantly reduced saturation magnetization is observed for these particles; this agrees with similar reports made earlier by several authors. To examine these phenomena further, Mossbauer spectra were obtained with high magnetic field applied longitudinally (H_ex=16.4 and 50 kOe). The spectra show the presence of recalcitrant spins where the spin configuration has a noncollinear arrangement that even a 50-kOe magnetic field does not remove. This hard-to-saturate component may lie in the surface layer of the Ba-ferrite small particles. The data also provide evidence that the Fe ions in the bipyramidal (2b) sites undergo magnetic-field-induced oscillations at 4.2 K     

NiTi substituted hexaferrites for magnetic recording

In order to obtain hexagonal ferrites with improved characteristics for application in the field of the magnetic recording, the ferrimagnetic Sr(NiTi)_x Fe_12-2xO₁₉ system is studied. Preliminary investigations suggested that NI is more effective than Co in reducing the magnetic anisotropy of hexaferrites. The system was analyzed as a function of the degree of substitution x and of the reaction temperature T_R and time τ. The reactivity of the mixtures and their magnetic characteristics (σ, H_c, H_A, T_c) were measured, and from the _χT(H) data it was possible to distinguish between single-domain or polydomain particles. The results are presented. The influence of the extraneous magnetic phases on the coercive field value was also studied and a preliminary investigation of the relation between coercive and anisotropy fields was carried out     

Magnetic properties of Sm2Fe17Nxpowder and bonded magnet

Sm₂Fe₁₇N_x powders were prepared through metallurgical processes such as melting, casting, pulverizing, and gas nitrogenation. Epoxy resin and zinc-bonded magnets were prepared from the powder by a compression molding process. The magnetic properties of magnetically aligned Sm₂Fe₁₇N_x powder were (BH)_max=170 kJ/m³ (21.4 MG-Oe), Br=1.20 T, and H_cJ=547 kA/m (6.87 kOe). Those of an epoxy-bonded magnet were (BH)_max =103 kJ/m³ (13.0 MG-Oe) and Br=0.835 T. H _cJ values in excess of 2 MA/m (25 kOe) were observed in the case of a zinc-bonded magnet     

Effect of stress on the law of approach to saturation magnetizationin carbon steels

In high fields where the magnetization is approaching saturation, the resolved magnetic polarization I can be expressed by a power series of the inverse of external field H as: I=I_s-b/H ²-c/H³ . . ., or alternatively in terms of the reversible permeability μ_rev=1+(2b/H³+3c/H⁴+ . . .)/μ₀ where I_s is the spontaneous magnetic polarization and b, c, are constants. These equations express the law of approach to saturation magnetization. The coefficient b for a cubic crystal has been deduced as b=0.0762/I_s[K+1.5(λ₁₀₀-λ ₁₁₁)σ]², where σ is the applied stress and others are magnetic constants. The values of reversible permeability μ_rev under biasing field H were measured for carbon steels with applied stresses. The results showed that the square root of 2b changed linearly with the applied stress, The values of magnetic constant K andλ₁₀₀ -λ₁₁₁ were calculated, They agreed with the standard values, but were affected by chemical composition and heat treatment of materials, especially in λ₁₀₀-λ₁₁₁     

Magnetic anisotropy of perpendicular media on grooved structuresubstrate

Magnetic anisotropies were investigated for CoCr perpendicular magnetic films on grooved structure substrates (pitch length 2.1 μm) prepared by CF₄-reactive-ion etching. Perpendicular magnetic anisotropy decreases in the region where groove depth GD >650 A. The reduction is due to the inclination of the crystal growth axis on the groove surface. In-plane magnetic anisotropy, K_u∥, strongly depends on GD and saturation magnetization M_s. In a region of large GD and large M_s, Ku_∥ is mainly due to shape anisotropy. In a region of small GD and small M_s , K_u∥ is caused by perpendicular magnetic anisotropy, in addition to shape and magnetorestrictive anisotropy     

Hard magnetic phase in rapidly quenched Zr-Co-B alloys

In order to identify a hard magnetic phase in rapidly quenched Zr-Co-B alloys and clarify its magnetic properties, Zr-Co-B ribbons, Zr-Co ribbons, and Zr-Co ingots were studied. The hard magnetic phase is interpreted as a Zr₂Co₁₁ intermetallic compound. This compound has a Curie temperature of 500°C and uniaxial magnetic anisotropy with an anisotropy field of 34 kOe. The magnetization of this compound was estimated to be 67 emu/g at 15 kOe. In addition to the hard magnetic phase, the low and high T_c phases appear in both binary and ternary alloys. The low T_c phase is FCC Zr₆Co₂₃ with T_c=180°C. The magnetization of Zr₆Co₂₃ was estimated to be 44 emu/g at 15 kOe. The high T_c phase is cobalt including a small amount of zirconium. In Zr-Co-B alloys, suitable boron addition is shown to enhance the coercive force. On the other hand, the addition increases the magnetization. While the boron addition produces cobalt, it reduces Zr₆Co₂₃ or quenches its ferromagnetism     

High performances boron doped γ-Fe2O3particles prepared from oxalic precursors

γ-Fe₂O₃ particles (L≈0.15 to 0.2 μm, L/D≈2 to 5) with coercivity up to 400 Oe have been prepared from oxalic precursors. To preserve the particle form, the oxalates were doped with boron. The effects due to this element was studied during the different thermal treatments which effect the pseudomorphous transformation of oxalate particles into spinel ferrite. ESCA spectroscopy, and X-ray measurements could point out the presence of a Fe₃BO₅ phase at the surface of γ-Fe₂O₃ particles. In spite of the important mass losses (H₂O, CO, CO₂) and the important crystallographic structure modifications occurring during the transformation of oxalate into magnetic oxide, γ-Fe₂O ₃ particles obtained by this method have very good textural characteristics. Boron-doped γ-Fe₂O₃ particles were used to make 3.5-in diskettes with standard formulation. In these conditions, media properties were comparable to trading diskettes properties     

Photoelectric inclination sensor and its application to themeasurement of the shapes of 3D objects

A method for obtaining the tilt angle and direction in a two-dimensional plane, by using a photoelectric inclination sensor consisting of an LED, a hemispherical spirit level, and a photodiode array is explained. An application of the sensor to the measurement of the shape of a 3-D object is also described. Light from the LED projects a bubble in the spirit level and throws a shadow onto the surface of an array composed of four equivalent p-n junction diodes, isolated from each other by a cross on a wafer. The tilt angle and direction in a two-dimensional plane are obtained by combining the diode outputs. By positioning the sensor on the crosspoints of the lines drawn longitudinally and latitudinally at an interval on the surface of a small mountain in a Japanese garden, the x and y components of the tilt angle can be obtained and its shape is reconstructed by a computer. The principle of the sensor, the system to display the tilt angle and its x and y components, and the application of the system to the measurement of the shape of a mountain are explained     

STM control of noninteger residual charge Q0 onthe central electrode of a double-tunnel junction

In a voltage-biased mesoscopic double-tunnel junction, the Coulomb threshold V_C is an e-periodic function of Q ₀, the charge on the inner electrode. In the STM work described here, a large Au tip images 100-Å Ag particles deposited on a cleaved BSCCO crystal substrate. Stable double junctions between the tip, the imaged particle, and the substrate are identified by Coulomb staircase I(V)'s. The control of Q ₀ is demonstrated by the variation of tip-particle spacing. The parameterization of such results permits a discussion of Q ₀ variation mechanisms     

放电等离子烧结技术制备Fe78Si13B9块体非晶纳米晶磁性材料

通过高能球磨技术制备了Fe₇₈Si₁₃B₉磁性非晶合金粉体,采用XRD和DSC分析了Fe₇₈Si₁₃B₉非晶合金粉体的相组成、玻璃转变温度T_g、开始晶化温度 T_x 和晶化峰温度T_p;利用放电等离子烧结（SPS）技术在不同烧结温度下制备了块体磁性非晶纳米晶合金试样,利用XRD、SEM、Gleeble3500、VSM等分析了不同烧结温度下烧结块体试样的相转变特性、微观形貌、力学性能和磁学性能。结果表明,在500 MPa的烧结压力下,随着烧结温度的升高,烧结试样中的非晶相开始逐渐晶化,烧结试样的致密度、抗压强度、微观硬度、饱和磁化强度均显著提高;在500 MPa的烧结压力和823.15 K的烧结温度下,获得了密度为6.6 g/cm³,抗压强度为1500 MPa,饱和磁化强度为1.3864 T的非晶纳米晶磁性材料。     

Magnetic properties and critical currents of epitaxial YBa2Cu3O7-x films

The authors report results of magnetic and transport measurements on thin epitaxial films of YBa₂Cu₃O_7-x which show critical current densities of 10⁷ A/cm² at 4.2 K. They exhibit well-formed symmetrical hysteresis loops and flux-trapping effects and linear susceptibilities at low fields. Magnetic and transport critical currents are in good agreement at low temperatures. The above properties are attributed to strong pinning from point defects which are suggested to be more numerous in films than in bulk single crystals. Diamagnetic shielding effects can be very large and are proportional to the critical current at zero field; however, there is a large penetration of H_a at all field values. Field-cooled magnetization is always very small, being only a few percent of the diamagnetic shielding. This small value is attributed to a balance between trapped flux and expelled flux in the cooling process. The strong pinning in attributed to a high density of defects in the film