Synthesis and photochemical performance of CdS nanoparticles photocatalysts for photodegradation of organic dye

Large scale CdS nanoparticles are synthesized by a facile and effective route. The as-prepared CdS product was characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electronmicroscopy, photoluminescence spectroscopy, X-ray photoelectron spectroscopy and UV–Vis diffuse reflectance spectroscopy. The CdS nanoparticles showed higher photocatalytic activity for the discoloration of methyl orange under UV light irradiation for 90 min. Significantly, the stability and recycling of the photocatalyst was also investigated. This study may provide a new insight into the design and prepared of visible-light photocatalytic materials.     

Synthesis,structural and optical properties of CdS nanoparticles with enhanced photocatalytic activities by photodegradation of organic dye molecules

CdS nanoparticles (NPs) were synthesized using co-precipitation method. X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to confirm the structures and morphologies of CdS NPs. X-ray diffraction data confirmed the crystal structure of the CdS NPs. Raman spectrum exhibited the Raman modes of LO and 2LO of CdS at 290 and 595 cm^?1 respectively. The evaluated band gap was 3.15 eV, this value was shifted compared with the bulk value and this could be a significance of a size quantization effect in the sample. The CdS nanoparticles showed higher photocatalytic activity for the discoloration of methyl orange (MO) under UV light irradiation for 90 min. The highest photocatalytic activity was obtained with the sample containing 0.3 wt % CdS nanoparticles, in which more than 98 % of the MO was discolored within 90 min.     

Quantum confinement effect of CdS nanoparticles dispersed within PVP/PVA nanocomposites

Nanocomposite films of CdS nanoparticles within PVP/PVA blend were prepared. The prepared films were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy, Ultraviolet–visible spectroscopy (UV–vis), transmission electron microscopy (TEM) and photoluminescence (PL) spectra. The amount of Cd⁺ used strongly influenced the size of the CdS nanoparticles, which was confirmed by XRD, UV–vis absorption spectra, PL emission spectra and TEM images. Smaller sized CdS nanoparticles were formed in higher content of cadmium. The results of XRD indicate that CdS nanoparticles were formed with hexagonal phase in the polymeric matrix. PL and UV–vis spectra reveal that nanocomposite films shows quantum confinement effect. Optical band gap and particle size were calculated and is in agreement with the results obtained from TEM data. The direct energy band gap was increased up to 2.86 eV.     

Utilization of a ZnS(en)0.5 photocatalyst hybridized with a CdS component for solar energy conversion to hydrogen

Photocatalytic solar energy conversion to chemical energy attracts great attention due to its high potential in harvesting renewable energy for the future. A ZnS(en)_0.5 photocatalyst hybridized with a CdS component was synthesized by solvothermal and precipitation methods to compare the effect of preparation methods on photocatalytic performance. The highest hydrogen production rate (559 μmol g^?1 h^?1) was achieved from a solvothermally synthesized ZnS(en)_0.5?CdS composite at 80 wt% of CdS content under standard 1-sun-irradiation condition (1000 W/m²). Photocatalytic hydrogen production rates from ZnS(en)_0.5?CdS photocatalysts were highly associated with degrees of charge separation, crystallinity, reduction power, and light absorption. By comparing two different routes for the synthesis of ZnS(en)_0.5?CdS photocatalysts, solvothermally-fabricated material was shown to have a higher photocatalytic activity compared with material fabricated by a precipitation method. This improvement may be due to its excellent crystalline and charge-separation characteristics.     

Ferromagnetism in Gd-doped CdS dilute magnetic semiconducting nanorods

Cd _x Gd_1?x S (x = 0–0.15) nanorods have been synthesized by solvothermal technique. X-ray diffraction study reveals that pure and Gd-doped CdS nanorods exhibits hexagonal wurtzite structure. Transmission electron microscopy reveals nanorods like morphology of synthesized CdS having 14 and 26 nm size of pure and 15 % doped CdS nanorods. UV–Visible absorption study confirms the blue shift in the energy band energy due to the quantum confinement effects. Photoluminescence spectra confirm the defect free nature of the synthesized nanorods with peaks emerging around 528 and 540 nm due to the green emission. The magnetic study shows that the pure and Gd-doped CdS nanorods exhibits ferromagnetic character and the magnetisation increased by five times from 0.074 to 0.422 emu/g upon Gd-doping.     

Photocatalytic degradation of methyl orange dye by NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles under visible irradiation: effect of varying the synthesis temperature

Nanoparticles of nickel ferrites (NiFe₂O₄) were synthesized at different temperature of synthesis (25, 50 and 80 °C) through the chemical co-precipitation method. The synthesized powders were characterized using X-ray diffraction for crystallite size and lattice parameter calculation. It reveals the presence of cubic spinel structure of ferrites with crystallite size between 29 and 41 nm. Transmission electron microscopy and scanning electron microscopy showed uniform distribution of ferrite particles with some agglomeration. The Fourier-transform infrared spectroscopy showed absorption bonds, which were assigned to the vibration of tetrahedral and octahedral complexes. Raman spectroscopy is used to verify that we have synthesized ferrite spinels and determines their phonon modes. The thermal decomposition of the NiFe₂O₄ was investigated by TGA/DTA. The optical study UV–visible is used to calculate the band gap energy. Magnetic measurements of the samples were carried out by means of vibrating sample magnetometer and these studies reveal that the formed nickel ferrite exhibits ferromagnetic behavior. Photoluminescence showed three bands of luminescence located at 420, 440 and 535 nm. The photocatalytic properties of nickel ferrite (NiFe₂O₄) nanoparticles were evaluated by studying the photodecomposition of methyl orange as organic pollutant models and showed a good photocatalytic activity.     

Structural,morphological, optical and electrical properties of CdS thin films simultaneously doped with magnesium and chlorine

CdS thin films simultaneously doped with Mg and Cl at different doping concentrations (0, 2, 4, 6 and 8 at%) were prepared on glass substrates by spray pyrolysis technique using perfume atomizer at 400 °C. The effect of Mg and Cl doping concentration on the structural, morphological, optical and electrical properties of the deposited films were investigated using X-ray diffraction (XRD), scanning electron microscopy, UV–Vis spectroscopy and dc electrical measurements, respectively. XRD analysis showed that the undoped and doped CdS films exhibit hexagonal structure with a preferential orientation along the (0 0 2) plane. The 2θ angle position of the (0 0 2) peak of the doped films was shifted towards a higher angle with increasing Mg and Cl concentration. The UV–Vis–NIR absorption spectra of Mg and Cl doped thin films are measured and classical Tauc approach was employed to estimate their band gap energies. The increase in band gap energy from 2.46 to 2.73 eV with the reduction in crystallite size supports quantum size effect. Raman spectra implied that more defects existed in the doped samples. Electrical studies showed that all the films have resistivity in the order of 10¹ Ω-cm and the CdS film with 6 at% Mg and Cl concentration has a minimum resistivity of 1.332 × 10¹ Ω-cm.     

Clew-like hierarchical ZnO nanostructure assembled by nanosheets as an efficient photocatalyst for degradation of azure B

In this study, hierarchical ZnO nanostructure assembled by nanosheets was synthesized via a facile and rapid ultrasound assisted route without any surfactant or template. The phase structure, morphology and optical property of the ZnO sample were investigated by XRD, FT-IR, SEM, and UV–Vis spectroscopy. Nitrogen sorption was also studied to determine the specific surface area and the pore size distribution. The ZnO sample was hexagonal pure phase of hierarchical clew-like microspheres consisting of nanosheets with average thickness and specific surface area of 50 nm and 41 m² g^?1, respectively. Synthesized ZnO was applied for the photocatalytic degradation of an organic dye, azure B as a pollutant model under UV irradiation. The effects of several parameters including dye concentration, catalyst dosage, pH, and irradiation time on photocatalytic degradation have been studied. The results indicated hierarchical ZnO has potential application for degrading of organic pollutants. Hydroxyl radicals were found to be main reactive species in this photodegradation process.     

Preparation, Characterization and Photocatalytic Properties of Ba-Cd-Sr-Ti Doped Fe3O4 Nanohollow Spheres on Removal of Congo Red Under Visible-Light Irradiation

In this study, Ba-Cd-Sr-Ti doped Fe₃O₄ nanohollow spheres were successfully prepared via a simple solvothermal method. The crystal size, structure, morphology and elemental analysis of the as-prepared sample were investigated in detail by X-ray diffraction (XRD), FT-IR, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy, respectively. Magnetic hysteresis measurement was carried out on a vibrant sample magnetometer (VSM) showing the soft ferromagnetic property at room temperature. The synthesized nanohollow spheres were employed as a photocatalyst to study the photocatalytic degradation of dye contaminations. The UV-Vis results showed that the specimen could well catalyze the decolorizing of congo red (CR) solution and a removal efficiency of 99.5 % was obtained at pH 6. The optical characteristic of the products was studied by estimating the band-gap energy based on diffuse-reflectance spectroscopy (DRS) which represented the doped magnetite with semiconductor metals to be more prone in the visible region as compared to UV region. Some factors such as initial dye concentration, pH, and contact time influencing the decomposition of CR were evaluated.     

Influence of Au Photodeposition and Doping in CdS Nanorods: Optical and Photocatalytic Study

Au-modified CdS nanorods (100–200 nm × 5–10 nm) are synthesized via two different techniques, namely photodeposition and doping. The prepared samples are characterized by x-ray powder diffraction, transmission electron microscopy (TEM), and UV–vis and fluorescence spectroscopy. X-ray diffraction study confirmed the hexagonal phase of bare and Au-CdS samples, whereas, 5 wt% Au³⁺ doping into CdS resulted in a slight distortion in the crystal structure toward higher degree side. TEM images revealed the fine distribution of Au nanodeposits of size in the range of 2.5–4.5 nm on to the CdS surface in the photodeposited sample. The optical spectrum shows a significant red-shift in absorption onset (485 nm → 515 nm) and band-edge emission (505 nm → 512 nm) of CdS nanorods with the replacement of certain Cd²⁺ ions with Au³⁺. The influence of Au photodeposition and doping in CdS nanorods was comparatively tested by photooxidation of RhB (50 ppm) dye aqueous solution under direct sunlight irradiation (35–40 mWcm^?2). Our results point out that 5 wt% Au³⁺ doping into CdS nanorods remarkably improved its activity and stability due to homogeneous dispersion of charge throughout the crystal, quick Fermi level equilibration, and an improvement in ionic bond formation.     

A Novel one-step synthesis of Ag-doped ZnO nanoparticles for high performance photo-catalytic applications

In this report, pure and silver (Ag) doped zinc oxide (ZnO) nanoparticles with various concentrations of silver (5 and 10 wt%) was successfully synthesized by a novel and one step microwave irradiation method. Powder X-ray diffraction results indicates that all of the as-synthesized samples including the highest Ag (10 wt%) doping have a hexagonal wurtzite type structure and average crystalline size was found to be 28, 21 and 16 nm for pure and Ag doped ZnO respectively. Spherical shaped morphology with an average diameter of around 32–13 nm was observed by Transmission electron microscope analysis. UV–Vis spectra revealed that, Ag doped samples exhibits a red shift in the absorption band edge with increasing Ag dopant concentration. The photocatalytic degradation of methyl violet (MV), phenol and rhodamine B (RHB) was investigated by using Ag-ZnO catalyst under UV light irradiation. The result showed that the photocatalytic property was significantly improved by Ag doping. The improved photocatalytic mechanism by Ag doping was also discussed. The samples were further characterized by photoluminescence spectra and Fourier Transform Infrared Spectra (FTIR) analysis.     

Green Synthesis of Silver Nanoparticles Using Salacia chinensis: Characterization and its Antibacterial Activity

The aim of the present research work was to synthesize silver nanoparticles (AgNPs) using Salacia chinensis plant extract and to evaluate its antibacterial activity. AgNPs were successfully synthesized and formation of AgNPs was confirmed by visual color change and UV (ultraviolet) spectroscopy. Prepared AgNPs were purified and characterized by using dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectroscopy, x-ray diffraction (XRD), scanning electron microscopy coupled with energy dispersive x-ray spectroscopy (SEM-EDAX), and transmission electron microscopy (TEM). UV peak at 434 nm confirmed the formation of AgNPs. DLS studies showed that AgNPs size prepared in all conditions were in the range of 100–200 nm. XRD studies revealed crystalline nature of AgNPs. EDAX studies confirmed the presence of silver in colloidal dispersion and images were recorded by using SEM and TEM. Synthesized AgNPs were found to be effective against Staphylococcus aureus and Pseudomonas aeruginosa. In conclusion, AgNPs could serve as a good alternative in treatment of bacterial infections in this era of multidrug resistance.     

The synthesize of CuWO<Subscript>4</Subscript> nano particles by a new morphological control method,characterization of its photocatalytic activity

In various branch of health sciences the nanoparticles are widely used for removing of bacteria, pollutes and etc. However, remove of chemical pollutes like azo dyes, pesticides, cyanide, colors, bacteria, parasites, antibiotics drugs and etc under photocatalytic conditions are still interest. In this work, we synthesized a nonparticle of copper tungstate (CuWO₄) via a co-precipitation method. We also investigated the effect of amino acids such as cysteine, glycine, and valine on morphology and particle size of nanoparticles. The structure and morphology of nano particles were characterized by XRD, SEM, VSM, EDS and DRS spectroscopy methods. The methyl orange (MO) degradation model was used for assessment of photocatalytic properties of as-prepared nanoparticles under UV irradiation. The results have been shown that the CuWO₄ nanoparticles can be decomposed about 81% of MO after 80 min UV irradiation.     

Study on photocatalysis of TiO 2 nanotubes prepared by methanol-thermal synthesis at low temperature

TiO₂ nanotubes were synthesized by the solvothermal process at low temperature in a highly alkaline water–methanol mixed solution. Their characteristics were identified by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), specific surface area (BET), Fourier transform infrared spectroscopy (FTIR) and UV–Vis absorption spectroscopy. The as-prepared samples were tested by the photodegradation reaction of methylene blue (MB) dye under visible-light irradiation. The ratios of methanol and water, as well as calcination temperature, affected the morphology, nanostructure and photocatalytic performance. The methanol solvent plays an important role in improving crystallization of the anatase phase, which affects the photocatalytic reaction. Titanate nanotubes were synthesized in methanol–water volume ratios of 10:90, 20:80 and 30:70 which still had high absorbability. Titania nanotubes formed at a calcination temperature of 300 °C using methanol–water volume ratio of 30:70 showed highest photocatalytic performance, much higher than that using water solvent and TiO₂–P25 powder.     

Sonochemical synthesis, characterization, and photocatalytic properties of Bi2−x Sb x WO6 nanorods

We report an efficient route for the sonochemical synthesis of Bi_2?x Sb _x WO₆ (x = 0, 0.01, 0.02, 0.05, 0.1, and 2) nanorods using bismuth nitrate/antimony chloride and sodium tungstate as precursors. The products obtained have been characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and UV–Vis diffuse reflectance spectroscopy. The photoactivities of all the samples for the Rhodamine-B (RhB) photodegradation were investigated systematically under UV and visible light irradiation. The results of the photocatalytic degradation of RhB in aqueous solution showed that 2–5 % antimony ion doping greatly improved the photocatalytic efficiency of sonochemically synthesized Bi₂WO₆ nanorods under both UV and visible radiation compared to its undoped counterpart. Among all the samples, the Sb₂WO₆ nanorods exhibited the highest photodegradation efficiency since 86 % of RhB could be photodegraded in 90 min under UV radiation. The stability of the photocatalysts was ascertained using FT-IR and Raman spectroscopy.     

Effect of morphology in the photocatalytic degradation of methyl violet dye using ZnO nanorods

In the present work, high purity ZnO nanorods were synthesized by solid state reaction method at different annealing temperatures (250–400 °C). The structural, morphological and optical characteristic of the ZnO nanorods were studied. X-ray diffraction results confirmed that the ZnO nanorods have Wurtzite structure with high crystal quality. The grain size has increased from 23 to 27 nm with increasing temperature. The scanning electron microscopy and high resolution-transmission electron microscopy photographs showed the formation of ZnO nanorods. The bonding natures of the synthesized nanorods were analyzed by Fourier transform infra-red spectroscopy. The blue shift in the absorption edge was observed from the UV–Vis spectrum. The photoluminescence spectra showed two emission peaks corresponding to blue and red emissions. The photocatalytic performance of these nanorods was evaluated using methyl violet dye. The result showed that photocatalytic performance is highly depends on the morphology of the nanorods.     

Facile hydrothermal synthesis and characterization of LaFeO3 nanospheres for visible light photocatalytic applications

LaFeO₃ nanospheres were synthesized by hydrothermal method followed by calcination. Citric acid was found to be key factor to the purity and the surface morphology of the LaFeO₃ nanospheres. The obtained nanospheres have been structurally characterized by XRD which confirms the single crystalline orthorhombic structure. The structural information of the nanosphere was also confirmed from the Raman spectrum. HRSEM and AFM revealed that the prepared sample has been composed of spherical like morphology with an average size of about 45 nm. From XPS analysis, the chemical state of the LaFeO₃ nanospheres was confirmed. Magnetic measurement indicates the products shows weak magnetic behaviour. The UV–Vis spectroscopy analysis shows strong absorption at 466 nm which confirms that the obtained material has excellent visible light absorption ability. Furthermore, the photocatalytic experiment demonstrates that the prepared LaFeO₃ nanospheres exhibit well and stable photocatalytic activity for decomposition of methyl orange under visible-light irradiation.     

Tuning of optical,thermal and antimicrobial capabilities of CdS nanoparticles with incorporated Mn prepared by chemical method

Cadmium sulfide (CdS) nanoparticles with different amounts of incorporated Manganese (Mn: 10, 15 and 20 mol%) has been prepared by chemical method. In optical properties the UV–Vis–NIR absorption spectra of all samples showed blue shift compared with the bulk CdS and decrease in band gap with Mn concentration. The presence of functional groups was identified by fourier transform infrared spectroscopy. It confirmed presence of metal sulfur bonding and weak interaction between anions (S^2?) and cations (Mn²⁺). The Photoluminescence spectra showed two emission peaks at 397 and 541 nm corresponding to the electron-hole recombination of CdS and surface trap induced emission respectively. In thermal properties thermogravimetric curve indicated increase in weight loss with Mn incorporation suggesting that pure CdS nanoparticles are thermally more stable than Mn incorporated CdS nanoparticles. The antimicrobial activities of Mn incorporated CdS were studied against Gram-positive and Gram-negative bacteria as test microorganisms using agar plating-spot inoculation method.     

Biosynthesized zinc oxide using <Emphasis Type="Italic">Lycopersicon esculentum</Emphasis> peel extract for methylene blue degradation

This work presents a study on the effects of different peel extract weight percentages in the biosynthesis of zinc oxide (ZnO) for its application in the photocatalysis. Zinc nitrate was used as a source of the zinc ions, while Lycopersicon esculentum (tomato) contributed the peels for the extracts to be used as a reductant and stabilizing agent. The synthesized samples were studied and characterized through Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, high resolution transmission electron microscopy and UV–Vis spectroscopy. The morphology of the surface of the material showed that samples vary in size and shape distribution depending on the amount of extract used. The band gap values were of 3.08, 3.1 and 3.18 eV for the 1, 2 and 4% concentrations, respectively. The photocatalytic properties of the ZnO were evaluated through methylene blue degradation and the results presented a 97% dye degradation in 150 min, which is more efficient than comparable commercial ZnO.     

Mechanochemical Synthesis and Characterization of Group II-VI Semiconductor Nanoparticles

Synthesis of metal sulfide semiconductor nanoparticles of group II-VI; namely ZnS, PbS, CdS, and CuS; by mechanochemical method was carried out in a high energy ball mill from corresponding metal acetates and sodium sulfide. The samples were continuously milled for 10 h with sample withdrawal at 2 h time interval. Structural properties of nanoparticles were studied by x-ray diffraction (XRD), transmission electron microscope (TEM), and ultraviolet-visible spectra. Particle size distribution and stability of 10 h milled samples were examined using particle size analyzer and Turbiscan. It was found that nanoparticles synthesized by mechanochemical method had mean particle sizes as small as 2–25 nm, low agglomeration, narrow size distribution, and uniformity of particle structure and morphology.