共查询到19条相似文献,搜索用时 140 毫秒
1.
不同纤维对轻集料混凝土韧性性能影响的研究 总被引:11,自引:2,他引:11
针对轻集料混凝土易于开裂、脆性较大等问题进行了研究,提出了在轻集料混凝土中掺加纤维增强的技术措施来改善混凝土的韧性并达到抑制轻集料混凝土易于开裂的问题。文中对采用聚丙烯纤维、碳纤维和钢纤维等不同品种的纤维在轻集料混凝土所起的作用进行了探讨。 相似文献
2.
3.
为缓解聚合物透水混凝土路面硬化后脆性发展对路面的破坏,在已有经验和结论基础上研究聚丙烯纤维改性聚合物透水混凝土路面的路用性能。以无溶剂聚氨酯为胶黏剂,复掺聚丙烯纤维透水混凝土为道路面层,制作路段模型进行抗氯离子渗透、承载力、抗冲击和路面径流削减等一系列试验研究,并与普通透水混凝土对比分析。结果表明:普通透水混凝土与聚合物透水混凝土渗透系数分别为初始渗透系数的81%与92%,普通透水混凝土较聚合物透水混凝土易堵,主要由于聚合物乳液改善了新拌透水混凝土的工作性能,提高了混凝土的致密性; 胶乳中含有大量活性物质,在混凝土水化、硬化过程中增加了胶乳与集料及水化产物的黏附性; 聚丙烯纤维改性聚合物透水混凝土面层承载力较聚合物透水混凝土面层承载力提高了52%; 随着聚丙烯纤维掺量的增加,抗冲击性能增强,在复掺聚丙烯纤维掺量(质量分数)为1.5%时,抗冲击性能提高245.9%; 聚丙烯纤维改性聚合物透水混凝土路面雨量径流系数为0.11~0.29,较普通透水混凝土路面有更好的径流削减效果。 相似文献
4.
5.
6.
本文论述了轻骨料混凝土的发展历程,指出了轻骨料混凝土用于承重结构时的弊病.使用纤维增强轻骨料混凝土,能有效提高轻骨料混凝土的力学性能,使混凝土的抗折、抗裂、抗渗及韧性等性能得到不同程度的改善.在保持轻骨科混凝土质轻特征的前提下,将聚丙烯纤维掺入轻骨料混凝土并用于承重结构将是今后的发展方向. 相似文献
7.
新型聚合物保温砂浆的开发与应用 总被引:1,自引:0,他引:1
研究了膨胀珍珠岩、水泥用量、可再分散乳胶粉、聚丙烯短纤维和纤维素醚对聚合物保温砂浆性能的影响,结果表明,导热系数随膨胀珍珠岩用量的增加而降低:抗折、抗压强度随膨胀珍珠岩用量的增加在一定范围内先提高后下降,膨胀珍珠岩的最佳用量为32%;膨胀珍珠岩用量对干表观密度的影响比水泥的大,说明膨胀珍珠岩对砂浆密度的影响占主要作用;随着纤维素醚用量的增加,保水率增大,可调整纤维素醚的用量使砂浆获得良好的保水性.所获得的新型聚合物保温砂浆的导热系数为0.0912 W/(m·K),抗压强度达1.98 MPa,压折比为2.21. 相似文献
8.
采用钢纤维和聚丙烯纤维对自密实轻骨料混凝土进行改性,完成了 1组无纤维自密实轻骨料混凝土及4组钢-聚丙烯混杂纤维自密实轻骨料混凝土的工作性能、力学性能及微观结构的试验研究,从宏观与微观2个尺度系统分析了钢-聚丙烯混杂纤维的增强增韧机理.结果表明:5组自密实轻骨料混凝土均具有良好的流动性、黏聚性和间隙通过性,可满足自密实混凝土工作性要求;钢纤维与聚丙烯纤维可在不同结构层次和受荷阶段发挥阻裂作用,产生正协同效应,显著提高自密实轻骨料混凝土的劈裂抗拉强度和抗折强度;骨料-基体界面区的密实度随养护龄期延长而明显提高,而纤维与基体间存在微细孔隙,界面区结构较为松散. 相似文献
9.
膨胀珍珠岩是珍珠岩矿石经破碎、筛分、预热再在高温中悬浮瞬间焙烧而成的一种具有封闭气孔、轻质粒状材料。它容重轻,保温性好,且具有一定强度,是较好的轻骨料之一。国内外膨胀珍珠岩主要应用于建筑保温和建筑灰浆用集料。近年来亦开始用这种轻集料配制成混凝土以用于承重结构。这样可降低钢筋混凝土结构重量的30~35%,增大装配构件的尺寸,改善 相似文献
10.
研究了微膨胀纤维混凝土的抗压、抗折强度与聚丙烯纤维混凝土和普通混凝土的对比,及聚丙烯纤维的掺量对微膨胀纤维混凝土的抗压、劈拉强度的影响。建立了微膨胀纤维混凝土的抗压强度和劈拉强度与纤维掺量的关系式。微膨胀纤维混凝土的折压比与不掺纤维及膨胀剂的普通混凝土相当,聚丙烯纤维混凝土较不掺纤维及膨胀剂的普通混凝土有所提高,微膨胀纤维混凝土的拉压比随纤维掺量的增加而提高。 相似文献
11.
Jong-Pil Won Hee-Byoung Kang Su-Jin Lee Sang-Woo Lee Joo-Won Kang 《Construction and Building Materials》2011,25(10):3810-3819
Recently, research has been conducted using fibers to reduce the explosive spalling of concrete. Assessments of the volume fraction of polypropylene fiber in high-strength and lightweight concrete has shown that an optimum volume fraction of fiber reduces explosive spalling by discharging pore pressure and heat stress inside the concrete through the dissolution of fibers during exposure to high temperatures. In this study, we manufactured a high-strength polymer–cement mortar that can be used in repairs of many concrete structures by selecting three kinds of lightweight aggregate that have excellent heat interception performance, combined with varying volume fractions of polypropylene fiber to reduce explosive spalling. We analyzed the thermal characteristics and physical and mechanical properties of the mortar at high temperature. The analysis of test results for compressive strength, flexural strength, thermal conductivity, and thermogravimetric showed that a mixture of expanded perlite with high thermal stability and 0.2% polypropylene fiber showed the best physical, mechanical, and thermal characteristics. 相似文献
12.
将钢纤维掺入轻骨料(人造膨胀珍珠岩)混凝土成为钢纤维轻骨料混凝土,它集中了钢纤维混凝土和轻骨料混凝土的优点,弥补了普通混凝土存在的抗拉强度低和自重大等不足。本文对这种新型混凝土材料的力学性能开展初步研究,针对试验中得到的钢纤维轻骨料混凝土的立方体抗压强度、劈拉强度、抗折强度、轴心抗压强度和弹性模量等进行讨论,分析钢纤维体积率的变化对钢纤维轻骨料混凝土力学性能的影响,给出相应的计算表达式,以利于其在工程实践中的推广和应用。试验结果表明,采用轻骨料和加入钢纤维后,混凝土的强度和变形等力学性能的改善效果十分明显。 相似文献
13.
14.
15.
16.
针对当前高层建筑物中普通混凝土自重大,而轻骨料混凝土强度较普通混凝土低的现状,以不同玄武岩纤维体积率(Vb)、聚丙烯纤维体积率(Vp)和陶粒代取代率(Rc)为影响因素,利用正交试验法设计了9组混杂纤维轻骨料混凝土(HF-LWC),进行了抗压强度、抗折强度和劈裂抗拉强度试验,并基于试验结果建立了强度预测模型.结果表明:三... 相似文献
17.
Nicolas Ali Libre Mohammad Shekarchi Mehrdad Mahoutian Parviz Soroushian 《Construction and Building Materials》2011,25(5):2458-2464
The purpose of this study is to improve the ductility of pumice lightweight aggregate concrete by incorporating hybrid steel and polypropylene fibers. The changes in mechanical properties and also bulk density and workability of pumice lightweight aggregate concrete due to the addition of hybrid steel and polypropylene fibers have been studied. The properties were investigated include bulk density and workability of fresh concrete as well as compressive strength, flexural tensile strength, splitting tensile strength and toughness of hardened concrete. Nine concrete mixtures with different volume fractions of steel and polypropylene fibers were tested. A large increase in compressive and flexural ductility and energy absorption capacity due to the addition of steel fibers was observed. Polypropylene fibers, on the other hand, caused a minor change in mechanical properties of hardened concrete especially in the mixtures made with both steel and polypropylene fibers. These observations provide insight into the benefits of different fiber reinforcement systems to the mechanical performance of pumice lightweight aggregate concrete which is considered to be brittle. These results provide guidance for design of concrete materials with reduced density and enhanced ductility for different applications, including construction of high-rise, earthquake-resistant buildings. 相似文献
18.
为研究荷载损伤对纤维轻骨料混凝土抵抗氯离子侵蚀性能的影响,设计了掺加聚丙烯纤维、钢 聚丙烯纤维、钢纤维3种轻骨料混凝土,开展了抗拉和抗压试验。分别在40%,60%,80%极限荷载3种拉、压应力水平下持续加载60 s,并测量加载后的残余应变。卸载后将试件切割成直径100 mm、厚50 mm的圆柱体,通过NEL法测定氯离子扩散系数。研究结果表明:混凝土残余应变随着拉、压荷载等级的增大而增大,纤维对轻骨料混凝土极限强度和变形能力提高显著;未施加荷载时,随着纤维的增加,单掺聚丙烯纤维组氯离子扩散系数变小,混掺纤维组基本保持不变,钢纤维组显著增加;施加荷载后,纤维的增加没有显著改善轻骨料混凝土抗氯离子侵蚀能力;残余应变与氯离子扩散系数间存在正相关特性,残余应变越大,氯离子扩散系数越大。 相似文献