Mechanism of RF plasma induced fragmentation of SiCl4 and surface functionalization of polymeric substrates from SiClx species

The generation of extremely reactive species of silylium (silicenium) ions under plasma conditions opens up new ways for surface modification, even of the most inert polymeric surfaces. To control the plasma-induced chemistry and to tailor new molecular surface architecture, the mechanism of formation of the active species of the discharge must be understood. In this work the plasma-induced molecular fragmentation of SiCl₄ was studied and the surface functionalization of cellulose paper (CP), polyester (PET), polypropylene (PP), and polytetrafluoroethylene (PTFE) substrates with silicon atom based active species was evaluated. Gas chromatograph mass spectroscopy (GC-MS) and low Energy Electron MS (LEEMS) measurements carried out both on SiCl₄ and on the molecular mixture resulting from the recombination of plasma generated species indicate that the most predominant fragments are SiCl₃⁺ cations accompanied by SiCl₂⁺ and SiCl⁺ species. Survey and high-resolution electron spectroscopy for chemical analysis (ESCA) data collected from plasma functionalized surfaces show significant silicon and oxygen atom content regardless of the nature of the substrates. © 1996 John Wiley & Sons, Inc.     

Control of peptide secondary structure on star shape polypeptides tethered to polyhedral oligomeric silsesquioxane nanoparticle through click chemistry

New macromolecular self-assembling building blocks, star polypeptide-b-polyhedral oligomeric silsesquioxane (POSS) copolymers, were synthesized from octa-azido functionalized POSS (OVBN₃-POSS) with alkyne-poly(γ-benzyl-l-glutamate) (alkyne-PBLG) via a click reaction. The incorporation of POSS units at the core of PBLG moieties plays an important role, allowing intramolecular hydrogen bonding between the POSS and PBLG units to enhance the α-helical conformations in the solid state based on Fourier Transform Infrared spectroscopy (FTIR), solid state nuclear magnetic resonance (NMR), and wide-angle X-ray diffraction (WAXD) analyses.     

Protonation of polyaniline by surface-functionalized polymer substrates

The protonation of solution-coated emeraldine (EM) base by sulfonic and carboxylic acid groups on surface-functionalized low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), poly(ethylene terephthalate) (PET), and polytetrafluoroethylene (PTFE) films were characterized by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, and conductivity measurements. Surface functionalizations were achieved by sulfonation (for LDPE, HDPE, PP, and PET), by hydrolysis (for PET), and by near-UV-light-induced surface graft copolymerization with the Na salt of styrene sulfonic acid and acrylic acid (for all substrates). The efficiency of surface functionalization by graft copolymerization is substantially enhanced for substrates pretreated with O₃ or Ar plasma. Protonation levels of 50% can be readily achieved for EM coated on sulfonic acid, but not carboxylic acid, functionalized surfaces. The extent of protonation, however, is also dependent on the microstructures of the modified substrate surfaces. In all cases, charge transfer interactions between the EM layer and the functionalized substrates readily result in good adhesion of the electroactive polymer on the polymer substrates to give rise to conductive surface structures. © 1995 John Wiley & Sons, Inc.     

Surface-initiated controlled polymerization as a convenient method for designing functional polymer brushes: From self-assembled monolayers to patterned surfaces

Surface-functionalization mediated through “grafting from” methods is of considerable interest as means to tailor the chemical and physical properties of functional substrates in a reliable way. The resulting polymer brushes, obtained by a “grafting from” strategy, are composed of grafted polymer chains tethered from one of their extremities to a surface by a covalent bond. Tuning the molecular parameters of these polymeric brushes such as the nature of monomer, the grafting density, and the chain length as well as the design of micropatterned structures enables delicate modification of the properties of these substrates, paving the way to the development of functional surfaces. In this review, we highlight recent and most important approaches to form monolayers and to subsequently elaborate homogeneous and heterogeneous coatings of polymer brushes by surface-initiated polymerization. The control of initiator molecule assembly is particularly important for the final configuration of polymer brushes. We report the creation of homopolymers and block copolymers using major controlled polymerization techniques as well as lithographic techniques aiming at the design of polymeric (micro- or nano-) patterns.     

Controlled grafting of polymer brushes on poly(vinylidene fluoride) films by surface‐initiated atom transfer radical polymerization

Controlled grafting of well‐defined polymer brushes on the poly(vinylidene fluoride) (PVDF) films was carried out by the surface‐initiated atom transfer radical polymerization (ATRP). Surface‐initiators were immobilized on the PVDF films by surface hydroxylation and esterification of the hydroxyl groups covalently linked to the surface with 2‐bromoisobutyrate bromide. Homopolymer brushes of methyl methacrylate (MMA) and poly(ethylene glycol) monomethacrylate (PEGMA) were prepared by ATRP from the α‐bromoester‐functionalized PVDF surface. The chemical composition of the graft‐functionalized PVDF surfaces was characterized by X‐ray photoelectron spectroscopy (XPS) and attenuated total reflectance (ATR)–FTIR spectroscopy. Kinetics study revealed a linear increase in the graft concentration of PMMA and PEGMA with the reaction time, indicating that the chain growth from the surface was consistent with a “controlled” or “living” process. The “living” chain ends were used as the macroinitiator for the synthesis of diblock copolymer brushes. Water contact angles on PVDF films were reduced by surface grafting of PEGMA and MMA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3704–3712, 2006     

Thermal imidization of poly(amic acid) precursors on surface-modified poly(tetrafluoroethylene) films via graft copolymerization with glycidyl methacrylate

A novel method for preparing composites of polyimides (PI) laminated to poly(tetrafluoroethylene) (PTFE) films is reported. PI/PTFE composites were developed through thermal imidization of poly(amic acid) (PAA) precursors on surface-modified PTFE films. Surface modification of PTFE films was carried out via Ar plasma pretreatment of the films, followed by UV-induced graft copolymerization with glycidyl methacrylate (GMA). The surface composition and topography of the graft copolymerized PTFE films and the delaminated PI and PTFE surfaces were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), respectively. The adhesion strengths of the PI (imidized PAA) on the GMA graft copolymerized PTFE films were evaluated as a function of various thermal imidization schedules. The adhesion reliability of the PI/PTFE composites was tested by a series of hydrothermal cycles. The development of strong Tpeel adhesion strengths of about 8 N/cm with excellent reliability for the PI/PTFE composites was attributable to the synergistic effect of coupling the curing of the epoxide functional groups of the grafted GMA chains with the imidization process of the PAA and the fact that the GMA chains were covalently tethered onto the PTFE surface. The PI/PTFE composites delaminated via cohesive failure inside the PTFE substrates. The delaminated PI film with a covalently adhered 'rough' PTFE surface layer exhibited a water contact angle as high as 140°.     

Preparing polymer brushes on poly(vinylidene fluoride) films by free radical polymerization

Grafting of polymer brushes on the poly(vinylidene fluoride) (PVDF) films was carried out by the surface‐initiated free radical polymerization. Surface‐initiators were immobilized on the PVDF films by surface hydroxylation and esterification of the surface‐tethered hydroxyl groups with 4,4′‐azobis(4‐cyanopentanoic acid) (ACP). Homopolymer brushes of methyl methacrylate (MMA) were prepared by free radical polymerization from the azofunctionalized PVDF surface. The chemical composition and topography of the graft‐functionalized PVDF surfaces were characterized by X‐ray photoelectron spectroscopy (XPS), attenuated total reflectance (ATR) FTIR spectroscopy, and atomic force microscopy (AFM). Kinetics study revealed an exponential increase in the graft concentration of polymer brushes with the reaction time, indicating that the chain growth from the surface was consistence with a chain polymerization. Water contact angles on PVDF films were reduced by surface grafting of MMA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 857–862, 2006     

Polymeric micelles formed by polypeptide graft copolymer and its mixtures with polypeptide block copolymer

Polymeric micelles based on poly(γ-benzyl-l-glutamate)-poly(ethylene glycol) graft copolymer (PBLG-g-PEG) with various degrees of grafting and the mixtures composed of PBLG-g-PEG and poly(γ-benzyl-l-glutamate)-poly(ethylene glycol) block copolymer (PBLG-b-PEG) were prepared by the dialysis method in deionized water. Fluorescence spectroscopy and transmission electron microscope (TEM) have been used to study the self-assembly behavior. The experimental results revealed that the degree of grafting exerts marked effect on the critical micelle concentration (CMC) and the morphology of the micelle formed by PBLG-g-PEG. With increasing the degree of grafting, the CMC value becomes larger and the morphology of formed micelle changes from irregular shape to spindle. It was also found that mixtures of PBLG-g-PEG/PBLG-b-PEG can associate into hybrid polymeric micelle with various shapes.     

Surface modification of polypropylene film by radiation‐induced grafting and its blood compatibility

To endow blood‐compatible properties onto polypropylene (PP) film, we grafted 2,3‐epoxypropyl methacrylate (EPMA) to PP film with a preirradiation grafting technique and then introduced various functional groups onto the grafted PP film. The EPMA grafting extent was dependent on the absorbed dose, reaction time, and temperature. The reactions of hydroxylation, iminodiacetation, sulfonation, phosphonation, and amination were performed under various conditions to introduce functional groups into the epoxy group of EPMA‐grafted PP films, respectively. We also immobilized heparin on aminated PP film to compare blood compatibility with various functionalized samples. The grafting, functionalization, and heparinization reaction were confirmed by Fourier transform infrared spectroscopy in the attenuated total reflectance mode and electron spectroscopy for chemical analysis. The blood compatibility of various functional groups and heparin‐introduced samples as well as control samples was examined by the determination of platelet adsorption and thrombus formation. For the examination of the blood compatibility of functionalized PP samples, acid citrate dextrose human whole blood and platelet‐rich plasma were used. The amount of the formed thrombus and the adherent platelets on functionalized PP sample surfaces were evaluated by an in vitro method following Imai and Nose's technique and by scanning electron microscopy, respectively. The blood compatibility of various functional‐group‐introduced PP films after grafting was better than that of the PP control. Phosphoric‐acid‐group‐ and heparin‐introduced PP films had especially good blood compatibility. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1726–1736, 2003     

UV-light assisted single step route to functional PEEK surfaces

Polyether ether ketone (PEEK) is a thermoplastic polymer of high technological relevance and is composed of repeating phenyl ether and benzophenone units. In the present work we will demonstrate the potential of UV irradiation assisted generation of free radicals on the surface benzophenone units to graft a variety of polymer chains on the PEEK surface. Both “grafting-to” and “grafting-from” approaches were explored by using different monomers and polymers. Styrene, butyl acrylate (BA), vinyl phosphonic acid (VPA), acrylic acid (AA), polyacrylic acid (PAA) and monomethoxy terminated oligo (ethylene glycol) methacrylate (MeOEGMA) were successfully utilized for this purpose. The functionalized membranes were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier-transformed Infrared (ATR-FTIR) spectroscopy, atomic force microscopy (AFM), and contact angle (CA) goniometry. PAA and PVPA functionalized PEEK surfaces exhibited pH responsive wettability behavior. PAA functionalized PEEK surfaces were further modified with lysine, which led to the controlled surface wettability over a broader pH range as compared to the simple PAA functionalized surface. The grafting with polyMeOEGMA rendered PEEK surface with nonfouling properties against bacterial growth. Employing this highly economical and simple method, the surface properties of PEEK can be modulated and tuned according to a specific application.     

Processing and characterization of multilayer films of poly(ethylene terephthalate) and surface-modified poly(tetrafluoroethylene)

Multilayer films were prepared from poly(tetrafluoroethylene) (PTFE) and poly(ethylene terephthalate) (PET) films together with using an adhesion promoting layer (tie-layer) consisting of ethylene-methyl acrylate-glycidyl methacrylate (E-MA-GMA) terpolymer and low density polyethylene (LDPE) blend. Na/naphthalene treatment and subsequent acrylic acid grafting were applied on the surfaces of PTFE for chemical modification. FT-IR spectroscopy, XPS analysis and surface energy measurements were performed to characterize the modified PTFE films. The analyses showed defluorination and oxidation of PTFE surface, and supported the acrylic acid grafting. The surface energy of modified surfaces enhanced with respect to unmodified one, which promoted adhesion. The multilayers were subjected to T-peel tests to measure the adhesion strength between PET and modified PTFE. Peel strength between the films increased with increasing E-MA-GMA amount in the tie-layer. A proportional dependence of peel strength on Na/naphthalene treatment time was observed for multilayers containing acrylic acid grafted or ungrafted PTFE. From SEM analysis, it was observed that the texture of the PTFE surface after modifications became rougher when compared to untreated PTFE. The peeled surfaces were also analyzed by SEM. The micrographs evidence that the energy absorbing mechanism is the plastic deformation of the tie-layer, which is responsible for obtaining high peel strengths.     

Biocompatible polypropylene prepared by a combination of melt grafting and surface restructuring

To construct biocompatible surfaces of polypropylene (PP), poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) was melt‐grafted onto PP backbones; this was followed by the restructuring of the surface mircostructure of the grafted PP by water treatment. The grafted products were analyzed by Fourier transform infrared spectroscopy and ¹H‐NMR; the surface microstructure of the graft copolymer was characterized by X‐ray photoelectron spectroscopy and atomic force microscopy, and the biocompatibility was evaluated by water contact angle, protein adsorption, and platelet adhesion measurements. This study showed that highly biocompatible surfaces of PP could be obtained by a combination of melt grafting and surface restructuring techniques, and the formation of hole‐with‐rim patterns and the enrichment of the PEGMEMA chains on the topmost surface were the key factors for the improved biocompatibility. This work advances functionalized PP generated by melt grafting as a promising candidate for applications in blood‐contact devices. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Influence of poly(acrylic acid) grafting density on switchable protein adsorption/desorption of poly(2-methyl-2-oxazoline)/poly(acrylic acid) mixed brushes

Poly(dopamine) is employed as an anchor to obtain a series of poly(acrylic acid) (PAA) and poly(2-methyl-2-oxazoline) (PMOXA) mixed brush coatings by sequential grafting to methods with PAA chains longer than PMOXA chains. Then, the prepared mixed brush coatings are rigorously characterized. The results show that the grafting density of PAA in mixed brushes could be well adjusted by changing the concentration of PAA solution used for the preparation of mixed brush coatings and the amounts of lysozyme adsorbed on PMOXA/PAA mixed brushes increase with increasing the grafting density of PAA chains while the desorption amounts decrease significantly when the grafting density of PAA is higher than one-half of PMOXA chains. When the grafting density of PAA is about one-half of PMOXA chains, the mixed brush could absorb high amounts of lysozyme (898.4 ng cm⁻²), and then more than 90% of adsorbed proteins could be released sharply by changing pH and ionic strength (I). © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48135.     

Surface Morphology and Properties of Rigid Poly(γ-benzyl L-glutamate) Membrane Modified by Flexible Poly(Vinyl Chloride)

Rigid poly(γ-benzyl L-glutamate)/flexible poly(vinyl chloride) (PBLG/PVC) blend membranes were prepared by casting the polymer blend solution in dichloroethane. Structure and morphologies of the PBLG/PVC blend membranes were investigated by Fourier transform infrared spectroscopy (FT-IR), atomic force microscopy (AFM), and scanning electron microscopy (SEM). Thermal, mechanical, and chemical properties of PBLG/PVC blend membranes were studied by differential scanning calorimetry (DSC), tensile tests, and other physical methods. It was found that the introduction of PVC could exert marked effects on the morphology and the properties of PBLG membrane.     

Silicon contamination of polypropylene films from glass reactors in a BCl3 RF cold plasma

Summary Cold plasma chemistry can be used for surface modification and/or grafting of polymeric substrates for enhanced properties. In addition to interaction with the substrate, plasma reactions can also occur at other surfaces confined to the reactor. Contamination of polypropylene (PP) substrates with silicon, originating from the reactor walls in a BCl₃ plasma, has been shown to occur based on ESCA measurements and the presence of Si-based compounds in the gaseous phase has been shown by GC-MS and high resolution MS for the plasma generated molecular mixture. The Si incorporation is similar to that found with CF₄ plasmas where a shorter treatment time resulted in higher Si incorporation. These results indicate that reactor wall-origin contaminations can accompany plasma treatments, interfere with the the main reaction mechanisms and create serious problems for achieving the desired surface properties.     

Nanostructured thermotropic PBLG-PDMS-PBLG block copolymers

We report on the nano-organization and the thermal behavior of a series of triblock copolymers composed of a central soft polydimethylsiloxane (PDMS) and two polypeptide (poly-γ-benzyl-l-glutamate) blocks. Peptide blocks with varied lengths and therefore different secondary structures (β-sheet or α-helical) were attached to the PDMS central block. These two blocks are incompatible and microphase separate into different morphologies elucidated by polarized optical microscopy (POM), small-angle light scattering (SALS), X-ray spectroscopy (SAXS, WAXS) and atomic force microscopy (AFM). We demonstrate that the relative ratio of PBLG to PDMS direct both the type of nanodomain morphologies formed and also modifies the transition temperature. Each of these block copolymers have shown a reversible transition associated to its thermotropic liquid crystal behavior. At temperatures above the transition, the self-assembled structures are disrupted and prevented the organization at larger scales.     

pH-induced conformational changes of loosely grafted molecular brushes containing poly(acrylic acid) side chains

A series of water-soluble loosely grafted poly(acrylic acid) (PAA) brushes with four different grafting densities were synthesized by the “grafting from” approach using atom transfer radical polymerization (ATRP). Gel permeation chromatography (GPC) and ¹H NMR spectroscopy were used to provide evidence for formation of the well-defined backbones and the resulting brush copolymers. Atomic force microscopy was used to study the conformation of adsorbed brushes as a function of pH. The adsorbed molecules undergo a globule-to-extended conformational transition as the solution is changed from acidic to basic. This transition was monitored on a mica surface by imaging individual molecules with atomic force microscopy (AFM). The conformational behavior was compared with 100%-grafted PAA brushes. Unlike the loose brushes, the 100%-grafted molecules remained fully extended in a broad range of pH values (pH = 2-9) due to steric repulsion between the densely grafted side chains which is strongly enhanced upon adsorption to a substrate.     

Synthesis of novel ABA triblock and (ABA)n multiblock copolymers comprised of polyisobutylene and poly(γ-benzyl-l-glutamate) segments

The synthesis of ABA triblock copolymers comprised of polyisobutylene (PIB) and poly(γ-benzyl-l-glutamate) (PBLG) segments has been demonstrated for the first time by the polymerization of γ-benzyl-l-glutamate N-carboxyanhydride (BLG-NCA) initiated with well-defined α,ω-primary amino-functional PIBs. The ammonium-mediated polymerization of BLG-NCA provided better control of molecular weights and lower polydispersity indices (PDIs) compared to the conventional polymerization. The compositional homogeneity of the block copolymers has been confirmed by GPC-MALLS and ¹H NMR spectroscopy. Since the resulting ABA triblock copolymer possessed primary amino groups at α,ω-ends, further extension reaction with 4,4′-methylene-bis(phenyldiisocyanate) was possible to afford a novel (ABA)_n multiblock copolymer.     

Structure and Performance of Poly(vinyl alcohol)/Poly(γ-benzyl L-glutamate) Blend Membranes

Poly(vinyl alcohol) (PVA)/poly(γ-benzyl L-glutamate) (PBLG) blend membranes with different PBLG wt contents were prepared by pervaporation. Structure and surface morphologies of PVA/PBLG blend membranes were investigated by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). Thermal, mechanical, and chemical properties of PVA/PBLG blend membrane were studied by differential scanning calorimeter (DSC), tensile strength tests, and other physical methods. It was revealed that the introduction of PBLG homopolymer into PVA could exert an outstanding effect on the properties of PVA membrane.     

Carboxylmethyl chitosan-graft-poly(γ-benzyl-l-glutamate) glycopeptides: Synthesis and particle formation as encapsulants

Amphiphilic glycopeptides, carboxylmethyl chitosan-graft-poly(γ-benzyl-l-glutamate) (m-Chi-g-PBLG), were synthesized through ring-opening polymerization of γ-benzyl-l-glutamate N-carboxyanhydride (NCA) using short chained m-Chi as the macroinitiator and employed to form vesicles in aqueous solution. The elemental and NMR analyses revealed that the polymerization degree (DP) of grafted PBLG could be tuned by varying the feed ratio of NCA to m-Chi. The conformation of the grafted PBLG chains transformed from β-sheet to α-helix was correlated with the PBLG chain length. The m-Chi-g-PBLG vesicles can be prepared using double emulsion method and their sizes can be adjusted between 140 and 250 nm. The encapsulation of a model compound, FITC-dextran, in the vesicles revealed their potential applications as encapsulants or carriers. The in vitro release data revealed that a sustained release of FITC-dextran for a time period over two weeks can be achieved.