A New Approach for Performance Evaluation of TCP over Interference-Limited Wireless Channels over Interference Wireless Channels

A new metric for performance evaluation of transport control protocol(TCP) overwireless channels based on the interference-limited characteristics of code division multipleaddress(CDMA) system is proposed.According to the new metric,the performance of TCP over CDMAcorrelated channel for different protocol parameters and different versions is investigated.The resultsshow that appropriate selection of protocol parameters and packet error rate(PER) operation point canimprove significantly the capacity of packet-switched CDMA-based network.     

Multi-Hop Wireless Backhaul Networks above 10 GHz: Connectivity and Critical Density Evaluation

Microwave links are the obvious mobile backhauling solution for many mobile operators. Multi-hops are likely to be necessary in order to ensure connectivity for mobile backhaul solutions. The subject of the present paper is the evaluation of the connectivity of wireless multi-hop backhaul networks assuming high frequency transmissions among the relays. A novel analytical physical propagation and engineering model is presented for the calculation of the connectivity of wireless multi-hop networks that appropriate for operating frequencies above 10 GHz. Assuming equal power transmissions from every node and a random spatial node distribution following the homogeneous Poisson process, we calculate the node isolation probability. Furthermore, we calculate the minimum required node density in order to keep the backhaul network almost connected. The sensitivity of the isolation probability and of the minimum node density on frequency of operation, transmission power and climatic conditions is also investigated. Some useful conclusions are drawn.     

Performance of VBLAST Systems Based on Spatial Correlated MIMO Channels

1　Introduction　Recentinformationtheoryresultshaveshowntheenormouscapacitypotentialofwirelesscommunica tionsystemswithantennaarraysatboththetrans mitterandreceiver[1～ 3] .TheVBLASTarchitec ture[4～ 5] isonesuchapproach .VBLASTsystemstransmitparalleldatastreams,usingmultipleanten nas,simultaneouslyandinthesamefrequencyband .Withrichmultipathpropagation ,thesedif ferentstreamscanbeseparatedatthereceiverbe causeoftheirdistinctspatialsignatures.Inaflat fadingscatteringenvironmentwithindepen…     

Performance Evaluation of Space–Time Block Codes Over Keyhole Weibull Fading Channels

It is well known that degenerate channel phenomena known as keyholes may significantly reduce the capacity of multiple-input and multiple-output (mimo) channels. Keyhole mimo channels were predicted theoretically and also observed experimentally. In this paper, a novel method of analyzing the performance of keyhole mimo channels is proposed. The proposed method is based on the assumption that the received signal at the keyhole encompasses an arbitrary number of multipath components and the propagation environment is such that the resulting signal is observed as a non-linear function of the modulus of the sum of these components. Based on this assumption, we initially introduce the double Weibull fading model, constructed by the product of two independent Weibull distributed fading envelopes. Closed-form expressions for its moments-generating function, probability density function, cumulative distribution function, and moments are also derived. Based on these formulas, we analytically evaluate the performance of a 2 × 2 mimo space–time block-coding (stbc) system, where performance metrics such as the average symbol error probability for several modulation schemes, outage probability, amount of fading and ergodic capacity are given in closed form. Various performance evaluation results are presented in order to verify the proposed analysis.

Performance Test of CW 300 GHz Gyrotron FU CW I

A 300 GHz CW gyrotron FU CW I has been developed and installed in the Research Center for Development of Far-Infrared Region, University of Fukui as a power source of a high frequency material processing system. Its performance was tested and the maximum power of 1.75 kW / CW has been attained at the beam voltage of 15 kV and the beam current of 1A. The maximum window power efficiency of 15.5% has been obtained at the cathode voltage slightly lower than 15 kV. This gyrotron is designed to deliver a Gaussian beam after mode conversion from the oscillation mode TE_22,8 in the cavity with a complex of an internal radiator and beam shaping mirrors. The detailed measurement with an infrared camera has confirmed that a Gaussian beam is radiated when the magnetic field strength B _c at the cavity is adjusted at a proper value. However, within a range of B _c , the output power is emerged into multiple directions, which suggests simultaneous oscillation of competing cavity modes.     

Evaluation of WiseMAC and extensions on wireless sensor nodes

In the past five years, many energy-efficient medium access protocols for all kinds of wireless networks (WSNs) have been proposed. Some recently developed protocols focus on sensor networks with low traffic requirements are based on so-called preamble sampling or low-power listening. The WiseMAC protocol is one of the first of this kind and still is one of the most energy-efficient MAC protocols for WSNs with low or varying traffic requirements. However, the high energy-efficiency of WiseMAC has shown to come at the cost of a very limited maximum throughput. In this paper, we evaluate the properties and characteristics of a WiseMAC implementation in simulation and on real sensor hardware. We investigate on the energy-consumption of the prototype using state-of-the-art evaluation methodologies. We further propose and examine an enhancement of the protocol designed to improve the traffic-adaptivity of WiseMAC. By conducting both simulation and real-world experiments, we show that the WiseMAC extension achieves a higher maximum throughput at a slightly increased energy cost both in simulation and real-world experiments.     

Performance of Multiband Complex-Wavelet-Based MC-CDMA System with Space-Time Coding over Nakagami-m Fading Channels

Space-time coding technique and Multi-carrier CDMA (MC-CDMA) technique have received much interest due to their high frequency spectrum efficiency and high data rate transmission. On the basis of analyzing the two technique principle, utilizing the optimized multiband complex wavelet as multi-carrier basis function, we propose an MC-CDMA system based on multiband complex wavelet and space-time coding for downlink and investigate the system bit error rate (BER) performance over Nakagami-m fading channel. The system has much higher spectrum efficiency and data rate due to no need any cyclic prefix (CP) when compared to the conventional MC-CDMA system. Moreover, the application of space-time coding technique improves the ability against fading channel effectively and perfects the downlink performance further. Simulation results show that the proposed multiband complex-wavelet-based MC-CDMA (MBCW-MC-CDMA) system performs better than conventional MC-CDMA system and real wavelet-packet-based MC-CDMA system due to its superior ability against interferences. Especially, the space-time coded MBCW-MC-CDMA system has superior performance, and it outperforms single antenna MBCW-MC-CDMA and conventional MC-CDMA with space-time coding.     

Impact of Co-channel Interference on the Performance of Cooperative Diversity Systems over α–μ Fading Channels

International Journal of Wireless Information Networks - This paper investigates the impact of the co-channel interference on the performance of cooperative diversity networks. Selection...     

A Simulation Study on the Throughput Performance of TCP over Wireless Fading Channel

1　Introduction　TransportControlProtocol (TCP )asthewidespreadusedtransportprotocolintheInternetapplicationswasdesignedforwirelinenetworkswherethechannelerrorratesareverylowandcon gestionistheprimarycauseofpacketloss.Howev er ,whenTCPconnectionsextendoverwirelesslinks,manyfactorssuchasinterference,multipathfading ,usermobilityandatmosphericconditionsmaycauseerrorsresultinginframelossesoverthewirelesslinksthustheperformanceofTCPisseverelyaffected .　TheperformanceofTCPthroughputconsideri…     

Performance of STBC-OFDM Systems over Spatial Correlated Fading Channels

1　Introduction　Recently ,MultipleInputandMultipleOutput(MIMO)wirelesssystemsusingmulti elementan tennadiversityatboththetransmitterandthere ceiverhasdrawnconsiderableattention[1～3] .InMI MOsystems,space timecodingcouldbeemployedtoimprovelinkreliability ,suchasSpace TimeBlockCoding (STBC)whichhasaverysimplede codingmethodandfulldiversityachieved[4～7] .WhenSTBCisusedoverwidebandchannels,theOrthogonalFrequencyDivisionMultiplex (OFDM )techniquecanbeusedtogethertoeffectivelycombatf…     

Real-Time Optimized Error Protection Assignment for Scalable Image and Video over Wireless Channels

A new error protection assignment scheme with applications to real-time wireless multimedia transmission is presented. The proposed scheme exploits the structure of scalable sources to ensure optimal assignment. This novel approach recasts the nonlinear optimization problem into a linear one, and then further remodels it into a discrete programming problem, thereby reducing the computational complexity dramatically. Furthermore, the proposed algorithm does not impose any requirement on the convexity of the source; i.e., it can equally be applied on a convex or nonconvex source. Results show that the described method facilitates a significant complexity reduction with respect to existing schemes, while exhibiting almost equivalent performance.     

The Effects of Time-Varying Channels on OFDM

1　IntroductionRecently ,OrthogonalFrequencyDivisionMul tiplexing (OFDM)usesFFTtomultiplexdatasym bolsoversubcarrierstoimplementhigh bit ratedatatransmissionoverwirelesschannels,andhasbeenappliedinseveralcommunicationfields,suchasDig italAudioBroadcast (DAB) ,DAB ,AsymmetricalDigitalSubscriberLoop ,IEEE 80 2 1 1a ,andHIPERLANⅡ .However,OFDMisverysensitivetofrequencyoffsetandfrequencyspreadowingtofrequencydifferenceandrelativemovementbetweentransmittersandreceivers.Thisisahind…     

Review of Wireless Personal Communications Radio Propagation Models in High Altitude Mountainous Areas at 2.6 GHz

This paper presents five commonly used radio propagation models (RPMs) which are suitable for the prediction of path loss in macrocell environments of LTE wireless communication systems. These RPMs’ application in high altitude mountainous areas networks (HAMANETs) environment requires further validation and studies. Through using the measured path loss in the HAMANETs at 2.6 GHz to calculate the predicted value of the five RPMs and the measured value’s mean error (ME), root mean square error, and error standard deviation (ESTD), we verified the predicted value of the SPM model that is closer to the actual measurement. On this basis, the empirical propagation model in HAMANETs environment is corrected. When correcting, a method to calculate base station’s effective antenna height and propagation distance is provided by using the altitude above sea level data. This method can reduce the error that the mountainous areas are simplified to the flat-terrain in the existed propagation models. A linear least square method is used to calculate the optimal propagation model. Finally, the ME is the smallest, and the ESTD is less than 8 dB, which indicate that the corrected propagation model is more suitable for the actual environmental path loss’s prediction. The results show that the path loss factor of the test area is about 65 dB, including the influence of the high altitude, mountains, vegetation, and air humidity in HAMANETs environment. The study results can provide useful advice to the evaluation and verification of personal wireless communications in the HAMANETs. Furthermore, using the correction method proposed in this paper can correct propagation models suitable for the different propagation environments to improve the accuracy and efficiency of wireless network optimization.     

A Comprehensive Framework for Performance Analysis of Dual?Hop Cooperative Wireless Systems with Fixed?Gain Relays over Generalized Fading Channels

In the present contribution, we propose a comprehensive framework for the analysis of cooperative dual-hop wireless systems over generalized fading channels, which use an amplify and forward (AF) relaying mechanism with blind and semi-blind relays. In particular, the proposed framework provides either exact results or very accurate bounds for computing the moment generating function (MGF) of the end-to-end signal-to-noise ratio (SNR) for various fading channel models typically encountered in real propagation environments. Furthermore, with the help of the MGF-based approach for performance analysis of wireless systems over fading channels, we will show that important performance indexes can be easily derived from the MGF. With respect to previous published articles on the matter, the main contribution of the paper is twofold: i) by relying on the properties of the Meijer-G function, either exact expressions or accurate bounds for the MGF of the end-to-end SNR are provided, and ii) the analysis encompasses the vast majority of fading channel models. Numerical and simulation results will be compared to substantiate the analytical derivation.     

Design of 100 μW Wireless Sensor Nodes for Biomedical Monitoring

Wireless sensor nodes span a wide range of applications. This paper focuses on the biomedical area, more specifically on healthcare monitoring applications. Power dissipation is the dominant design constraint in this domain. This paper shows the different steps to develop a digital signal processing architecture for a single channel electrocardiogram application, which is used as an application example. The target power consumption is 100 μW as that is the power energy scavengers can deliver. We follow a bottleneck-driven approach: first the algorithm is tuned to the target processor, then coarse grained clock-gating is applied, next the static as well as the dynamic dissipation of the digital processor is reduced by tuning the core to the target domain. The impact of each step is quantified. A solution of 11 μW is possible for both radio and DSP running the electrocardiogram algorithm.

Performance of Layered Steered Space–Time Codes in Wireless Systems

Layered Steered Space–Time Codes (LSSTC) is a recently proposed multiple-input multiple-output (MIMO) system that combines the benefits of vertical Bell Labs space–time (VBLAST) scheme, space–time block codes (STBC) and beamforming. In this paper, we derive the error performance and capacity of a single-user LSSTC system. The analysis is general enough to any layer ordering and modulation schemes used. In addition, the derived analysis is general for any LSSTC structure in which layers may have different number of antenna arrays and may be assigned power according to any power allocation. Furthermore, we analytically investigate the tradeoff between the main parameters of the LSSTC system, i.e., diversity, multiplexing and beamforming. Our results give recursive expressions for the probability of error for LSSTC which showed nearly perfect match to the simulation results. Results have also revealed the possibility of designing an adaptive system in which it was shown that combining beamforming, STBC, and VBLAST has better performance than VBLAST at high SNR range.     

A highly linear and fully-integrated FMCW synthesizer for 60 GHz radar applications with 7 GHz bandwidth

A highly linear and fully-integrated frequency-modulated continuous-wave (FMCW) generator based on a fractional-N phase-locked loop (PLL) that is able to synthesize modulation schemes in 57–64 GHz range is proposed in this paper. The fractional-N PLL employs Colpitts voltage-controlled oscillator (VCO) at 60 GHz with 13.5% tuning range. Automatic amplitude and frequency calibrations are implemented to avoid drifts due to process, voltage and temperature variations and to set the center frequency of the VCO. Five-stage multi-modulus divider is used for division ratio switching, controlled by the sigma-delta (\(\Sigma \Delta\)) modulator MASH 1-1-1. The frequency sweep (chirp) bandwidth and duration are fully programmable via serial peripheral interface allowing up to 16 different chirps in complex modulation scheme. The PLL reference signal is 250 MHz provided by external low-noise signal generator which is also used for digital modules clock. The overall PLL phase noise is lower than ?80 dBc/Hz at 10 kHz offset and the chirp linearity is better than 0.01%. The complete FMCW synthesizer is implemented and verified as a stand-alone chip in a commercially available SiGe HBT 130 nm BiCMOS technology. The total chip area is \(2.04\,\text {mm}^2\), and the total power consumption is 280 mW.     

Comments and Further Results on ‘Performance Evaluation of a New BPSK-OFDM Timing Estimation Algorithm’

This comment first points out some inaccurate formulae and irrelevant comparisons between Wen’s algorithm and Beek’s one. Then, the correct formulae are provided, the limitations of these two estimators are discussed and some investigations on the local maximum in timing estimation are also presented. Both the simulation and the analysis demonstrate that the timing precision of Wen’s algorithm highly depends on the length of cyclic prefix (CP) and the channel fading rate. On the other hand, Beek’s algorithm will work better under a large CP length and in fast fading channels.

Performance Evaluation of Cost-Effective Multicast–Unicast Key Management Method

Group key management is one of the key security issues in multicast networks. The main challenge is to provide a secure group key management method which avoids high key update cost in terms of the number of transmitted keys. In order to achieve low key update cost for group key management, most of the existing methods increase their encryption/decryption cycles which requires a strong cryptographic function. In this paper, a cost-effective key management method is proposed to address the problem of high key update cost without increasing the encryption/decryption cycles. We evaluated our proposed method with existing tree-based methods by using Markov chain and Poisson Arrival Process. Results indicate the efficiency of our proposed method in reducing the key update cost significantly compared to the existing tree-based key management methods.     

Performance Analysis of Tags Collection Time on A New Architecture of 2.4 GHz Embedded Active RFID System for Indoor and Outdoor Tracking and Monitoring Applications Based on IEEE 802.15.4 Standard

This paper focuses on the analysis of tags collection time of 2.4 GHz embedded active Radio Frequency Identification (RFID) system for indoor and outdoor real-time tracking and monitoring applications based on IEEE 802.15.4 standard. The main novelty of the system is the implementation of the communication method in order to provide Machine to Machine (M2M) communication and automated switching mechanism between indoor and outdoor location by utilizing active RFID, Wireless Sensor Network (WSN), Global Positioning System (GPS) and mobile communication on a single platform. In this work, GPS receiver covers outdoor location tracking, while active RFID provides identification and Receive Signal Strength Indicator (RSSI) reading for each tag holder to cover indoor location tracking especially near or inside building where location information is not detected by GPS. Several experiments were conducted on three different RFID tags which were active RFID tag embedded with GPS and GSM (ERFIDG2), active RFID tag embedded with GPS (ERFIDG) and standalone RFID tag communicating with the same active RFID reader. The experiment was done to evaluate the communication performance of the active RFID in terms of tags collection time using Transparent (AT) and Application Programming Interface (API) mode. The experiment was extended to measure tags collection time in single hop and multi hops communication for Tag Talk First (TTF) and Reader Talk First (RTF) protocols. The results show that the proposed active RFID system (ERFIDG2) is better than the standalone and ERFIDG systems. The in-depth research done in this work is to study the experience and identify the challenges that will be faced in the development and implementation of a wireless RFID-based system for tracking and monitoring applications.