Small angle X-ray scattering and photoluminescence study of ZnO nanoparticles synthesized by hydrothermal process

Polydisperse ZnO nanoparticles have been synthesized by a hydrothermal process. Small-angle X-ray Scattering (SAXS) was performed for particle size distribution analysis of ZnO nanoparticles. Room-temperature photoluminescence measurements revealed that the ZnO nanoparticles have a single visible emission peak ～600?nm, although polydispersity of the sample shows no presence on PL spectrum. It seems the orange emission ～600?nm is due to the presence of Zn(OH)₂ on the surface of ZnO nanoparticles, instead of the commonly assumed interstitial oxygen defect.     

ZnO/CdS复合纳米粒子的热分解合成及发光性能

设计了简单的化学反应路线,在表面活性剂PEG400存在下通过简单的前驱体热分解反应合成了ZnO/CdS复合纳米粒子,其直径在4~10nm之间。前驱体则通过室温固相反应获得。用X射线衍射仪(XRD)和透射电子显微镜(TEM))对产物的结构和形貌进行了表征。同时,对产物的光致发光性能(PL)作了测试。结果表明:ZnO/CdS复合纳米粒子在380 nm处有一个较弱的归因于近带隙发射的发光峰,550 nm处较强的发射峰来自于由氧空位形成的深浅表面态所捕获的电子-空穴对的复合。另外,对它们的形成机理进行了简单的探讨。     

Room temperature ferromagnetism in Tb-doped ZnO dilute magnetic semiconducting nanoparticles

Pure and Tb-doped ZnO nanoparticles have been synthesized by chemical co-precipitation method. The transmission electron microscopy study reveals the spherical morphology of synthesized nanoparticles with average particle size 14–18 nm. The effect of Tb-doping on structural, optical and magnetic properties has been studied. X-ray diffraction shows that pure and Tb-ZnO nanoparticles exhibit wurtzite structure having hexagonal phase with primitive unit cell. It further reveals that there is no effect of Tb-doping on the X-ray diffraction pattern up to 2 % doping, however, higher doping concentration result in accumulation of Tb on ZnO surface. Photoluminescence spectra reveal that the doping Tb in ZnO changes crystallographic structure generating non-radiative oxygen vacancies. Three emission peaks located around 423, 485 and 515 nm has been observed. Pure ZnO nanoparticles show diamagnetic character, however, Tb-doped ZnO nanoparticles exhibit room temperature ferromagnetism. The correlation between defects generated upon Tb-doping to the observed ferromagnetism, in the synthesized nanoparticles, has been reported.     

基于PEG修饰的ZnO量子点光学特性研究

采用溶胶-凝胶法制备了ZnO量子点, 并采用有机高分子试剂PEG(聚乙二醇, M_w=2000)对其表面进行修饰。借助X射线衍射分析、傅立叶红外光谱、光致发光谱和透射显微镜等测试方法, 研究了PEG表面修饰对ZnO量子点结构和光学性能的影响规律。研究表明, 混合加入的PEG聚合物能够成功地包覆在ZnO量子点表面, 但没有改变量子点的晶体结构, 经PEG表面修饰后的ZnO量子点尺寸变小, 稳定性增强, 分散更均匀。同时经PEG修饰的ZnO量子点在400~500 nm波长区域缺陷态发射峰明显减弱, 表明采用PEG来改善ZnO量子点表面缺陷结构具有良好效果。     

Stability and nonlinear optical properties of ZnO nanoparticles

Photoluminescence (PL) of ZnO nanoparticles of different surface states and sizes grown by several methods has been measured. The origin of luminescence and dependence of the luminescence spectrum shape and intensity on 325 nm excitation laser power are studied. Strong ultraviolet emission at 3.26 eV, weak violet emission around 3.12 eV and weak green emission at 2.40 eV have been observed in 16 nm nanoparticles capped by octylamine grown by non-hydrolytic method. The nanoparticles are stable under high power laser radiation and their PL intensity increases nonlinearly with an increasing laser power. As the nanoparticle size decreases to 12 nm, high power laser produces nonradiative centers which may quench the luminescence in a degree. Nanoparticles of 8 nm capped by PVP and uncapped nanoparticles of 14 nm are unstable and their luminescence depends on the excitation laser power. High power laser can quench O vacancy emission and enhance ultraviolet emission in PVP capped nanoparticles while vacancy emission can not be quenched in uncapped nanoparticles.     

Cathodoluminescence and its mapping of flower-like ZnO, ZnO/ZnS core-shell and tube-like ZnS nanostructures

The cathodoluminescence (CL) properties including intensity and distribution of the band to band and defect emission of the flower-like ZnO, ZnO/ZnS core-shell and tube-like ZnS nanostructures have been investigated. It is indicated that the Ultraviolet (UV) emission at 380 nm of the flower-like ZnO nanostructures due to the band to band emission is weaker than their yellow emission at 600 nm induced by interstitial oxygen. Moreover, the UV emission of the ZnO nanorods unevenly distributes from the tip to the end. The UV emission on the tip is stronger than that of others due to the waveguide. On the contrary, the yellow emission at 600 nm is uniform. Furthermore, the UV emission of ZnO has been greatly enhanced and the yellow emission has been inhibited by the formation of ZnO/ZnS core-shell nanostructures in the sulfuration process due to the elimination of interstitial oxygen. However, the polycrystalline tube-like ZnS nanostructures shows the uniform and weak defect emission due to S vacancies.     

Characterization and optical properties of ZnO nanoparticles obtained by oxidation of Zn nanoparticles

Strong UV emission at about 399 nm (3.1 eV) and multiple blue emissions at 440-490 nm (2.70-2.53 eV) by ZnO nanoparticles have been observed. The characterizations of ZnO nanoparticles, obtained by oxidizing Zn nanoparticles prepared by arc-discharging, were investigated. The multiple blue PL becomes stronger as the oxidation temperature and time increase, which is attributed to the existence of various defects, in particular to interstitial zinc at the surface of the ZnO nanoparticles.     

Application of ZnO nanoparticles in influencing the growth rate of Cicer arietinum

In this work, ZnO nanoparticles (NPs) have been synthesised by hydrothermal method. This hydrothermally synthesised product has been characterised by powder X-ray diffraction and field emission scanning electron microscopy (FE-SEM) for the study of crystal structure and morphology/size. FE-SEM image revealed that ZnO NPs are spherical in shape with a diameter of 20–30?nm. The photoluminescence study of these NPs revealed that ZnO NPs consist of three emission peaks at 401, 482 and 524?nm. The UV emission peak at 401?nm is the band edge emission; however, the blue-green emission at 482?nm and green emission at 524?nm is related to defects. These ZnO NPs are used during the seed germination and root growth of Cicer arietinum. The effect of ZnO NPs has been observed on the seed germination and root growth of C. arietinum seeds. The effect of these ZnO NPs on the reactivity of phytohormones, especially indole acetic acid (IAA) involved in the phytostimulatory actions, is also carried out. Due to oxygen vacancies, the oxygen deficient, i.e. zinc-rich ZnO NPs increased the level of IAA in roots (sprouts), which in turn indicate the increase in the growth rate of plants as zinc is an essential nutrient for plants.     

Novel and simple synthesis of ZnO nanospheres through decomposing zinc borate nanoplatelets

Spherical zinc oxide (ZnO) nanoparticles had been successfully synthesized through decomposing zinc borate nanoplatelets at high temperature. The resulted ZnO nanospheres were characterized by X-ray diffraction (XRD), which indicated that ZnO had the hexagonal structure. Field-emission-scanning electron micrographs (SEM) revealed that ZnO nanoparticles had perfect spherical shape with narrow size distribution (average diameters 50 nm). These nanoparticles showed a broad emission band centered at 438 nm using an excitation wave of 325 nm at room temperature. Moreover, the sample was characterized by N₂ adsorption-desorption and the pore size distribution showed a sharp peak at 3.1 nm.     

Synthesis,characterization and growth mechanism of ZnO nanowires on NiCl<Subscript>2</Subscript>-coated Si substrates

Well-crystallized ZnO nanowires have been successfully synthesized on NiCl₂-coated Si substrates via a carbon thermal reduction deposition process. The pre-deposited Ni nanoparticles by dipping the substrates into NiCl₂ solution can promote the formation of ZnO nuclei. The as-synthesized nanowires were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL) spectrum. The results demonstrate that the as-fabricated nanowires with about 60 nm in diameter and several tens of micrometers in length are preferentially arranged along [0001] direction with (0002) as the dominate surface. Room temperature PL spectrum illustrates that the ZnO nanowires exist a UV emission peak and a green emission peak, and the peak centers locate at 387 and 510 nm. Finally, the growth mechanism of the nanowires is briefly discussed.     

Structural and optical characterization of ZnO doped PC/PS blend nanocomposites

PC50%/PS50% polymer blend nanocomposites, undoped and doped with different concentration of ZnO nanoparticles (1, 2, 3 wt%), have been prepared using solution casting method. Structural and optical studies have been performed using X-ray Diffraction (XRD), Scanning Electron Microscope (SEM) and Ultraviolet–Visible spectroscopy (UV–Vis). ZnO nanoparticles have been synthesized by chemical route method. The nanostructure of the ZnO nanoparticles has been ascertained through X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). Optical Absorption Spectra has been used to study optical constants of prepared blend nanocomposites. Energy band gap of PC/PS – ZnO blend nanocomposites have been calculated by using Tauc relation. The band gap of the nanocomposites decreases as ZnO wt% increases. Extinction coefficient, refractive index and real & imaginary part of dielectric constants increase with increase in ZnO nanoparticles wt%.     

Thermal annealing induced structural and optical properties of Ca doped ZnO nanoparticles

In this letter, the effects of annealing on structural and optical properties of Ca doped ZnO nanoparticles have been investigated. X-ray diffraction analysis reveals that the prepared particles are in hexagonal wurtzite structure and formation of secondary phase related to the Calcite was found after thermal annealing. UV–Vis measurements show free exciton absorption band appeared at 372 nm and increase of band gap with annealing of samples. Room temperature photoluminescence (PL) spectrum of the prepared Ca doped ZnO nanoparticles shows bands which belong to the near band edge emission at 377 nm and green emission at 556 nm. Annealed samples exhibit enhancement in the blue emission band. Raman spectra show the increment in the electron–phonon coupling value with annealing.     

Preparation and photoluminescence of surface N-doped ZnO nanocrystal

ZnO nanoparticles doped with nitrogen on surface were prepared by calcinating pure ZnO nanoparticles at 550 and 600 °C in NH₃ atmosphere. Uniform N-doped ZnO nanocrystal was characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and XPS. A Strong violet photoluminescence (PL) at 400nm was observed at room temperature when excited with 300 nm light, and the emission peak increases with the increase of nitrogen atoms concentration. The violet PL originated from the electron transition from shallow donor levels of oxygen vacancies and doping nitrogen atoms to the top of valence band level.     

Polyoxometalate-assisted electrochemical deposition of ZnO spindles in an ionic liquid

With the assistance of polyoxometalate (POM), ZnO spindles have been successfully synthesized in ionic liquid by electrochemical deposition. The as-obtained ZnO spindles are composed of small nanoparticles and have a porous structure with a specific surface area of 97.95 m²/g. Parallel experiments were also performed to understand the formation mechanism of the spindle-like ZnO. The experimental results showed that POM played a key role for the formation of the spindle-like ZnO. A possible formation mechanism was also proposed. The photoluminescence spectrum of the ZnO spindles exhibits a strong ultraviolet emission at 390 nm and a very weak visible emission at around 560 nm.     

Preparation and characterization of ZnO/ZnS core/shell nanocomposites through a simple chemical method

In this paper, we reported the preparation of ZnO/ZnS core/shell nanocomposites by sulfidation of ZnO nanostructures via a simple hydrothermal method. The precursors of bare ZnO nanoparticles and ZnO nanorods were synthesized by a surfactant-assisted hydrothermal growth. The structural, morphological, and element compositional analysis of bare ZnO nanostructures and ZnO/ZnS core/shell nanocomposites were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy techniques. The XRD results indicated that the phase of bare ZnO nanoparticles and ZnO nanorods was wurtzite structure, and the phase of coated ZnS nanoparticles on the surface of bare ZnO nanostructures was sphalerite structure with the size of about 8 nm. Photoluminescence measurement was carried out, and the PL spectra of ZnO/ZnS core/shell nanocomposites revealed an enhanced UV emission and a passivated orange emission compared to that of bare ZnO nanostructures. In addition, the growth mechanism of ZnO/ZnS core/shell nanostructures through hydrothermal method was preliminarily discussed.     

Optical characterization of ZnO thin films deposited by Sol-gel method

In this paper, ZnO thin film is deposited on Pt/TiO₂/SiO₂/Si substrate using the sol-gel method and the effect of annealing temperature on the structural morphology and optical properties of ZnO thin films is investigated. The ZnO thin films are crystallized by the heat treatment at over 400°C. The ZnO thin film annealed at 600°C exhibits the greatest c-axis orientation and the Full-Width-Half-Maximum (FWHM) of X-ray peak is 0.4360°. A dense ZnO thin film is deposited by the growth of uniform grains with the increase of annealing temperature but when the annealing temperature increases to 700°C, the surface morphology of ZnO thin film becomes worse by the aggregation of ZnO particles. In the results of surface morphology of ZnO thin film using atomic force microscope (AFM), the surface roughness of ZnO thin film annealed at 600°C is smallest, that is, approximately 1.048 nm. For the PL characteristics of ZnO thin film, it is observed that ZnO thin film annealed at 600°C exhibits the greatest UV (ultraviolet) exciton emission at approximately 378 nm, and the smallest visible emission at approximately 510 nm among ZnO thin films annealed at various temperatures. It is deduced that ZnO thin film annealed at 600°C is formed most stoichiometrically, since the visible emission at approximately 510 nm comes from either oxygen vacancies or impurities.     

Mg-Al共掺杂ZnO薄膜的制备及其光学特性

采用溶胶-凝胶（sol—gel）旋涂法在载玻片上制备了不同A1掺杂量的Mg—Al共掺杂ZnO薄膜．在室温下利用X射线衍射仪（XRD）、扫描电子显微镜（SEM）和光致发光（PL）谱仪等手段分析了Mg—Al共掺杂Zn0薄膜的微结构、形貌和发光特性．XRD结果表明Mg．AI＆掺杂zn0薄膜具有六角纤锌矿结构;随着Al掺杂量的增加,共掺杂薄膜呈C轴取向生长．由SEM照片可知薄膜表面形貌随Al掺杂量的增加由颗粒状结构向纳米棒状结构转变．透射光谱表明共掺杂薄膜在可见光区内的透射率大于50％,紫外吸收边发生蓝移．在室温下的PL谱表明Mg—Al共掺杂zn0薄膜的紫外发射峰向短波长方向移动：Al掺杂摩尔分数为1％和3％的Mg—Al共掺杂ZnO薄膜的可见发射峰分别为596nm的黄光和565nm的绿光．黄光主要与氧间隙有关,而绿光主要与氧空位有关．     

Structural, optical and photoluminescence studies of heavily Mn-doped ZnO nanoparticles annealed under Ar atmosphere

Undoped and heavily Mn-doped with ZnO nanoparticles (Zn_1?xMn_xO, x?=?0.0, 0.05, 0.1 and 0.2) annealed under Ar atmosphere have been synthesized by a sol–gel method. The structural properties and optical absorption of the prepared samples have been examined by powder X-ray diffraction, energy dispersive X-ray analysis, Fourier transform infrared (FTIR) spectroscopy and UV–visible spectrophotometer. Hexagonal wurtzite structure of the samples is confirmed by the XRD spectra. The average crystalline size of the Zn_1?xMn_xO nanoparticles has been calculated from X-ray line broadening and is decreased from 35.73 to 18.24?nm with increase in Mn concentrations from 0.0 to 0.2. The increase in lattice parameters indicates the substitution of Mn in ZnO lattice. SEM and TEM photographs indicated that the grain size of undoped ZnO is bigger than the Mn-doped ZnO which is due to the limitations of grain growth upon Mn doping. The presence of functional groups and the chemical bonding due to Mn doping is confirmed by FTIR spectra. PL spectra of the Zn_1?xMn_xO system showed that the shift in near band edge emission at 390?nm and a blue band emission at 450–490?nm which confirms the substitution of Mn.     

Template-free solvothermal synthesis of ZnO nanoparticles with controllable size and their size-dependent optical properties

ZnO nanoparticles (NPs) have been synthesized via a facile and template-free solvothermal method. The size of ZnO NPs could be tailored by adjusting the ratio of ethanol to ethylene glycol (EG). Their structure and morphology have been investigated. The as-prepared samples are monodispersed ZnO NPs with controllable sizes of about 24.2, 18.9 and 14.7 nm. The cathodoluminescence (CL) spectra of the samples show that the relative intensity ratio of the visible emission peak at 500-650 nm to the band-edge UV emission peak at 380 nm increases as the particle size decreases. Sample with smaller crystallites would have larger surface area and more oxygen vacancy defects, thus it exhibits higher visible emission peak. The UV-vis absorption spectrum indicates the band gap variation of the ZnO NPs with their size. Moreover, the size-dependent blue shifts of both the CL emission and the UV-vis absorption spectra reveal the effect of quantum confinement.     

Multicolor luminescence from transition metal ion (Mn2+ and Cu2+) doped ZnS nanoparticles

Mn and Cu doped ZnS nanoparticles in powder form were prepared by a simple solvothermal route. Particle size and crystal structure of the products were investigated through X-ray diffraction study revealing the formation of cubic ZnS nanoparticles of average diameter 2.5 nm. Particle size was also verified by the high resolution transmission electron microscopic images. Blue emission at approximately 445 nm was observed from the undoped sample, which was attributed to the presence of large surface defects. With increasing doping concentration the defect related emission gradually quenches and subsequently the impurity related emissions appeared. Mn doped samples exhibited orange emission at approximately 580 nm which may be attributed to the transition between (4)T1 and (6)A1 energy levels of the Mn2+ 3d states. Whereas, the Cu doped ZnS nanoparticles exhibited a red shifted strong blue emission at approximately 466 nm which is attributed to the transition of the electrons from the surface states to the 't2' levels of Cu impurities.