Analytical characterization of silane films modified with cerium activated nanoparticles and its relation with the corrosion protection of galvanised steel substrates

Galvanised steel substrates were pre-treated in bis-1,2-[triethoxysilyilpropyl]tetrasulphide silane solutions containing SiO₂ or CeO₂ nanoparticles activated with cerium ions. The surface composition was investigated by infrared spectroscopy. The film thickness was determined by scanning electron microscopy. The results showed that the barrier properties of silane films modified with nanoparticles depend upon the concentration of nanoparticles. The results also showed that the silane film thickness increases when the nanoparticles are activated with cerium ions. The anti-corrosion behaviour of the cerium activated nanoparticles was also investigated at the microscale level, in artificial induced defects, using the scanning vibrating electrode technique (SVET). The substrates treated with the silane coating modified with CeO₂ nanoparticles revealed improved corrosion behaviour comparatively to the coatings modified with SiO₂ nanoparticles. X-ray photoelectron spectroscopy and Auger electron spectroscopy experiments carried out on the defects after immersion in NaCl solutions revealed the presence of a surface film containing zinc corrosion products and cerium/ceria compounds.     

Electrochemical study of modified bis-[triethoxysilylpropyl] tetrasulfide silane films applied on the AZ31 Mg alloy

This work investigates the protective behaviour of bis-[triethoxysilylpropyl] tetrasulfide silane pre-treatments on the AZ31 Mg alloy. The silane solution was modified by the addition of cerium nitrate or lanthanum nitrate in order to introduce corrosion inhibition properties in the silane film.The corrosion behaviour of the pre-treated AZ31 magnesium alloy was studied during immersion in 0.005 M NaCl solution, using electrochemical impedance spectroscopy and the scanning vibrating electrode technique (SVET). The electrochemical experiments showed that the presence of cerium ions or lanthanum ions improve the protective behaviour of the silane film. The SVET experiments evidenced that the presence cerium in the silane film led to an important reduction of the corrosion activity.The results demonstrate that either cerium ions or lanthanum ions can be used as additives to the silane solutions to improve the performance of the pre-treatments for the AZ31 magnesium alloy.     

Cerium salt activated nanoparticles as fillers for silane films: Evaluation of the corrosion inhibition performance on galvanised steel substrates

The present work investigates the electrochemical behaviour of galvanised steel substrates pre-treated with bis-[triethoxysilylpropyl] tetrasulfide silane (BTESPT) solutions modified with SiO₂ or CeO₂ nanoparticles activated with cerium ions. The electrochemical behaviour of the pre-treated substrates was evaluated via electrochemical impedance spectroscopy in order to assess the role of the nanoparticles in the silane film resistance and capacitance. The ability of the Ce-activated nanoparticles to mitigate corrosion activity at the microscale level in artificial induced defects was studied via scanning vibrating electrode technique (SVET). Complementary studies were performed using potentiodynamic polarisation. The results show that the presence of nanoparticles reinforces the barrier properties of the silane films and that a synergy seems to be created between the activated nanoparticles and the cerium ions, reducing the corrosion activity. The addition of CeO₂ nanoparticles was more effective than the addition of SiO₂ nanoparticles.     

The synergistic combination of bis-silane and CeO2·ZrO2 nanoparticles on the electrochemical behaviour of galvanised steel in NaCl solutions

Bis-1,2-[triethoxysilylpropyl]tetrasulfide silane films containing CeO₂·ZrO₂ nanoparticles were deposited by dip-coating on galvanised steel substrates. The morphological features of the coated substrates were evaluated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The anti-corrosion performance of the modified silane film applied on galvanised steel substrates was studied by electrochemical impedance spectroscopy (EIS). The ability of nanoparticles to mitigate localized corrosion activity at artificially induced defects was investigated via the scanning vibrating electrode technique (SVET) and by the scanning ion-selective electrode technique (SIET). The results showed that the addition of nanoparticles provides good corrosion protection of the galvanised steel substrates pre-treated with the modified silane solutions. The corrosion activity was reduced by more than one order of magnitude. Complementary d.c. experiments, using zinc electrodes exposed to NaCl solutions containing the nanoparticles were also performed in order to better understand the role of the nanoparticles. An ennoblement of the corrosion potential and polarisation of the anodic reactions could be detected.     

Electrochemical assessment of the self-healing properties of Ce-doped silane solutions for the pre-treatment of galvanised steel substrates

The present work aims at assessing the electrochemical behaviour of galvanised steel (GS) substrates pre-treated with bis-[triethoxysilylpropyl] tetrasulfide silane (BTESPT) doped with cerium nitrate. Furthermore, the work aims at evaluating the self-healing properties of the dopant and discussing the possible mechanisms involved in this process. The study was performed by electrochemical impedance spectroscopy (EIS) and by the scanning vibrating electrode technique (SVET), during immersion in NaCl solutions. X-ray photoelectron spectroscopy (XPS) was also used to complement the electrochemical results. The results show that the protective behaviour of the pre-treatments based on Ce-doped silane solutions is dependent on the concentration of the dopant. The results also show that the dopant improves the anti-corrosion performance of the silane coatings formed on galvanised steel substrates.     

Application of EIS and salt spray tests for investigation of the anticorrosion properties of polyurethane-based nanocomposites containing Cr2O3 nanoparticles modified with 3-amino propyl trimethoxy silane

The Cr₂O₃ nanoparticles were modified with 3-amino propyl trimethoxy silane in order to obtain proper dispersion and increment compatibility with the polyurethane coating matrix. The nanocomposites prepared were applied on the St-37 steel substrates. The existence of 3-amino propyl trimethoxy silane on the surface of the nanoparticles was investigated by Fourier transform infrared (FTIR) spectroscopy and thermal gravimetric analysis (TGA). Dispersion of the surface modified particles in the polyurethane coating matrix was studied by a field emission-scanning electron microscope (FE-SEM). The electrochemical impedance spectroscopy (EIS) and salt spray tests were employed in order to evaluate the corrosion resistance of the polyurethane coatings. Polarization test was done in order to investigate the corrosion inhibition properties of the Cr₂O₃ nanoparticle on the steel surface in 3.5 wt.% NaCl solution. The adhesion strengths of the coatings were evaluated by pull-off adhesion tester before and after 120 days immersion in 3.5 wt.% NaCl solution. FT-IR and TGA analyses revealed that surface modification of the nanoparticles with 0.43 silane/5 g pigment resulted in the greatest amount of silane grafting on the surface of particles. Results obtained from FE-SEM analysis showed that the surface modified nanoparticles dispersed in the coating matrix properly. Results obtained from EIS and salt spray analyses revealed that the surface modified particles enhanced the corrosion protection performance of the polyurethane coating considerably. The improvement was more pronounced for the coating reinforced with 0.43 g silane/5 g pigment. Moreover, the adhesion loss decreased in the presence of surface modified nanoparticles with 0.43 silane/5 g pigment.     

A comparative study on the corrosion resistance of AA2024-T3 substrates pre-treated with different silane solutions: Composition of the films formed

This work reports a comparative study on the corrosion resistance of AA2024-T3 pre-treated with three different silane solutions. The silanes used for the pre-treatments of the AA2024-T3 panels were: 1,2-bis(triethoxysilyl)ethane (BTSE), bis-[triethoxysilylpropyl]tetrasulfide (BTESPT) and γ-mercaptopropyltrimethoxysilane (γ-MPS). The analytical characterisation of the silane films was performed by Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS). The corrosion performance of the pre-treated substrates was evaluated by electrochemical impedance spectroscopy (EIS). The results show that the pre-treatments based on silanes provide good corrosion protection of unpainted AA2024-T3. Painted substrates, previously pre-treated with the silane solutions also revealed improved corrosion resistance and good adhesion properties. Fatigue tests show that the silane pre-treatments do not affect the fatigue behaviour of the AA2024-T3. The work also discusses the formation of the protective silane films.     

Corrosion resistance performance of cerium doped silica sol–gel coatings on 304L stainless steel

The aim of this work is the synthesis and investigation of silane based organic–inorganic hybrid coatings, which can be used to improve the corrosion performance of steel structures subjected to a marine environment. The silane based sol–gel coatings were prepared by dip coating 304L stainless steel in a solution of organically modified silica sol made through hydrolysis and condensation of 3-glycidoxypropyl-trimethoxysilane (GPTMS) as precursor and bisphenol A (BPA) as a cross-linking agent in an acid catalyzed condition. The influence of the addition of cerium and the use of bisphenol A as a cross-linking agent on the microscopic features and morphology as well as on the corrosion resistance of the coatings were examined using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), neutral salt spray tests, potentiodynamic polarization and electrochemical impedance techniques. Results show that cerium modified nano-hybrid coatings exhibit a superior corrosion inhibition performance to that displayed by silica hybrid coatings. Additionally, data showed that the bisphenol A as a cross-linking agent has a significant effect on the morphology and corrosion resistance of the cerium doped silica coating. Omitting the use of bisphenol A causes the creation of defects/cracks in the coating, thereby promoting diffusion of the aggressive electrolyte toward the substrate and decreasing the corrosion resistance of the coating.     

Electrochemical corrosion behavior of nanocrystalline Co coatings explained by higher grain boundary density

In this paper, nanocrystalline Co coatings were prepared using pulse reverse electrodeposition method. The electrochemical corrosion behavior of nanocrystalline (NC) Co compared with coarse-grained Co (CG) coatings in different corrosion media were characterized using potentiodynamic polarization test, electrochemical impedance spectroscopy (EIS) and X-ray photoelectron spectroscopy (XPS). Results showed that in the NaOH or NaCl solutions, the NC Co exhibited improved corrosion resistance when compared with CG Co coatings, which is due to the higher grain boundary density in NC materials to quickly form a stable and protective passive film. In the case of NC Co coatings in HCl or H₂SO₄ solutions, since no obviously passive process can be observed, high grain boundary density in NC Co will accelerate corrosion by providing high-density of active sites for preferential attack. The controversial experimental results on NC Co coatings in different corrosion media can be reasonably explained by the positive or negative effect of high-density network of grain boundaries in NC materials.     

Real time mapping of corrosion activity under coatings

Current accelerated testing of aircraft coating systems for corrosion protection relies heavily on salt spray methods. Electrochemical techniques such as electrochemical impedance spectroscopy (EIS) and electrochemical noise methods (ENM) provide insight into the global properties of a coating system, and both techniques are being used on a limited basis. However, there is a need to investigate corrosion events with greater spatial resolution under coatings at the metal/coating interface. Such corrosion activity may be related to coating defects and variations in the surface chemistry of the underlying metal.

The scanning vibrating electrode technique (SVET) has been developed to allow high spatial resolution investigation of localized corrosion activity that may be associated with coating defects or galvanic coupled regions of the metal surface. The SVET offers high resolution in current measurements of the order of 0.5 μA/cm² and is able to detect in-situ initiation and progress of corrosion activity under a protective coating. Using the SVET, minute variations in d.c. current associated with localized corrosion activity are detected and used to map both anodic and cathodic corrosion activities in a localized area. The difference in initial corrosion activity under various coatings can be correlated to the performance life of the coatings. The application of SVET to aircraft coatings and corrosion is reported to demonstrate the utility of this important new electrochemical tool.

In the current study, the SVET was used to discriminate the corrosion protection performance of selected sol–gel based coating systems. Sol–gel based surface treatments are being developed as part of an environmentally compliant coating system alternative to the currently used chromate-based systems. The SVET results are compared with data obtained from chromium inhibition coating systems. The SVET analyses are compared with electrochemical impedance measurements. The comparison of such data will provide the basis to adopt SVET measurements as an early performance discriminator for newly developed coating systems.     

Synthesis of Environmentally Friendly Highly Dispersed Magnetite Nanoparticles Based on Rosin Cationic Surfactants as Thin Film Coatings of Steel

This work presents a new method to prepare monodisperse magnetite nanoparticles capping with new cationic surfactants based on rosin. Core/shell type magnetite nanoparticles were synthesized using bis-N-(3-levopimaric maleic acid adduct-2-hydroxy) propyl-triethyl ammonium chloride (LPMQA) as capping agent. Fourier transform infrared spectroscopy (FTIR) was employed to characterize the nanoparticles chemical structure. Transmittance electron microscopies (TEM) and X-ray powder diffraction (XRD) were used to examine the morphology of the modified magnetite nanoparticles. The magnetite dispersed aqueous acid solution was evaluated as an effective anticorrosion behavior of a hydrophobic surface on steel. The inhibition effect of magnetite nanoparticles on steel corrosion in 1 M HCl solution was investigated using potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS). Results obtained from both potentiodynamic polarisation and EIS measurements reveal that the magnetite nanoparticle is an effective inhibitor for the corrosion of steel in 1.0 M HCl solution. Polarization data show that magnetite nanoparticles behave as a mixed type inhibitor. The inhibition efficiencies obtained from potentiodynamic polarization and EIS methods are in good agreement.     

Electro-assisted preparation of dodecyltrimethoxysilane/TiO2 composite films for corrosion protection of AA2024-T3 (aluminum alloy)

Thin films of organosilanes have been successfully used as the alternative to toxic chromate coatings for surface pretreatment of metals and alloys. To further improve their corrosion performance, in the present work nano-scaled TiO₂ particles were added to the dodecyltrimethoxysilane (DTMS) films coated onto AA2024-T3 substrates, by using either the dip-coating or the cathodically electro-assisted deposition process. The obtained composite films were investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM), water contact angle measurements, Fourier transform reflection-absorption IR (FTRA-IR) and electrochemical impedance spectroscopy (EIS). The results show that these two techniques (nanoparticles incorporation and the electro-assisted deposition) both facilitate the deposition process of silane films, giving thicker deposit and higher coverage surface along with higher roughness and hydrophobicity, and thereby improve their corrosion resistance. Moreover, the corrosion performance of silane films is further improved by the combined use of nanoparticles modification and electro-assisted deposition.     

The combined use of scanning vibrating electrode technique and micro-potentiometry to assess the self-repair processes in defects on “smart” coatings applied to galvanized steel

Model weldable primer coatings for galvanized steel were modified with submicron containers loaded with corrosion inhibitors. This procedure aims at introducing a new functionality in the thin coatings self-repair ability. The assessment of this property demands new protocols and new approaches, combining conventional electrochemical methods with electrochemical and analytical techniques of micrometer spatial resolution. Thus, in this work model defects were created in the coatings by using a focused ion beam (FIB). The coated samples, containing the model defects, were immersed in a NaCl 0.05 M solution and the corrosion inhibition ability was studied using the scanning vibrating electrode technique (SVET) and the scanning ion-selective electrode technique (SIET). SVET–SIET measurements were performed quasi-simultaneously. Qualitative chemical analysis was performed by SEM combined with EDS. Complementary studies were carried out by electrochemical impedance spectroscopy (EIS) to assess the effect of the containers filled with corrosion inhibitors on the barrier properties of the coatings. The electrochemical results highlight the importance of the combined use of integral and localized electrochemical techniques to extract information for a better understanding of the corrosion processes and corresponding repair of active microscopic defects formed on thin coatings containing inhibitor filled containers.     

Assessment of the corrosion protection of aluminium substrates by a Mg-rich primer: EIS,SVET and SECM study

Magnesium-rich coatings have the capability of providing sacrificial corrosion protection to aluminium substrates and therefore present a new and challenging field of development. In this work the mechanism of protection of an aluminium substrate by a Mg-rich coating was investigated using the scanning vibrating electrode technique (SVET) and scanning electrochemical microscopy (SECM). The SVET has shown the evolution of the pit activity with time under sacrificial protection, whereas the SECM allowed indirect sensing of the cathodic activity above the electrodes. The study was complemented by classical electrochemical techniques, namely electrochemical impedance spectroscopy and open circuit potential measurement.     

Nanostructured sol-gel coatings doped with cerium nitrate as pre-treatments for AA2024-T3: Corrosion protection performance

Nanostructured hybrid sol-gel coatings doped with cerium ions were investigated in the present work as pre-treatments for the AA2024-T3 alloy. The sol-gel films have been synthesized from tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTMS) precursors. Additionally the hybrid sol was doped with zirconia nanoparticles prepared from hydrolyzed tetra-n-propoxyzirconium (TPOZ). Cerium nitrate, as corrosion inhibitor, was added into the hybrid matrix or into the oxide nanoparticles.The chemical composition and the structure of the hybrid sol-gel films were studied by XPS (X-ray photoelectron spectroscopy) and AFM (atomic force microscopy), respectively. The evolution of the corrosion protection properties of the sol-gel films was studied by EIS (electrochemical impedance spectroscopy), which can provide quantitative information on the role of the different pre-treatments. Different equivalent circuits, for different stages of the corrosion processes, were used in order to model the coating degradation. The models were supported by SEM (scanning electron microscopy) measurements.The results show that the sol-gel films containing zirconia nanoparticles present improved barrier properties. Doping the hybrid nanostructured sol-gel coatings with cerium nitrate leads to additional improvement of the corrosion protection. The zirconia particles present in the sol-gel matrix seem to act as nanoreservoirs providing a prolonged release of cerium ions. The nanostructured sol-gel films doped with cerium nitrate can be proposed as a potential candidate for substitution of the chromate pre-treatments for AA2024-T3.     

纳米SiO2复合漆的制备及其耐蚀性能

通过化学改性，硅烷偶联剂（A858）与纳米SiO2表面的羟基发生反应，得到亲油性纳米SiO2，提高了SiO2与涂料的相容性。原子力显微镜（AFM）测试结果表明，SiO2粒子的平均尺寸约为50nm，分散均匀。在机械搅拌和超声场共同作用下，将纳米SiO2加入到油漆中，制备了纳米SiO2复合漆。浸泡腐蚀实验、阳极极化及交流阻抗（EIS）测试结果表明，纳米SiO2改善了油漆在NaCl水溶液中耐蚀性，SiO2质量分数为0．91％时，复合涂料的耐蚀性最佳。     

Electrochemical and surface analytical study of vinyl-triethoxy silane films on iron after exposure to air

One of the applications of silanes is to improve adhesion of organic coatings to metals. In this work, films of vinyl-triethoxy silane (VTES) on iron (Fe/VTES system) were used to study the effect of exposure to air on protective properties and on chemical transformations of silane films. After exposure to air for up to 12 days, impedance measurements were made in 0.01 M Na₂HPO₄, and surface analysis was carried out with AES, XPS and FTIR. Exposure to air resulted in an increase of charge transfer resistance of Fe/VTES, and led to chemical changes involving growth of iron oxides at the Fe/VTES interface, formation of SiO₂ and related species, formation of polysiloxanes and polymerisation of vinyl groups. These transformations include hydrolysis and probably also photochemical reactions with the participation of free radicals (formation of SiO₂ and polymerisation). Identified products can contribute to the improved protectiveness by enhancing the barrier properties and by inhibition of corrosion. It is suggested that apart from improving adhesion, silanes play an important role also by protecting against corrosion.     

The improvement of anticorrosion properties of zinc-rich organic coating by incorporating surface-modified zinc particle

The corrosion behaviors of zinc-rich coating with various zinc contents, ranging from 0 to 60 volume percent, in thin organic coatings (below 5 μm) were characterized by electrochemical impedance spectroscopy (EIS), free corrosion potential (E_corr) measurement and cycle corrosion test (CCT). It was verified that both coatings with 60 volume percent of zinc powder and without zinc powder showed good corrosion resistance mainly due to the cathodic protection and barrier effect, respectively. On the other hand, coatings with an intermediate concentration (10–40 vol.%) of zinc powder was not successful in protecting a steel substrate efficiently. To improve anticorrosion property of zinc-rich coating, the surface modification of zinc particle was carried out with derivatives of phosphoric and phosphonic acid in the aqueous solution. The effects of the surface modification of zinc particle on corrosion resistance of the coating were investigated with scanning vibrating electrode technique (SVET) and X-ray photoelectron spectroscopy (XPS). The best anti-corrosion performance was achieved when the incorporated zinc particle was treated with phosphoric acid 2-ethylhexyl ester and calcium ion simultaneously, which induced the formation of alkyl-phosphate-calcium complex layer of 190 nm in thickness on zinc particles. Corrosion resistance was improved by the decreased zinc activity and the increased compatibility between the formed complex layer on zinc surface and polymer binder matrix.     

Corrosion protection of Mg alloys by cathodic electrodeposition coating pretreated with silane

The corrosion resistance characteristics of three coatings on magnesium alloy AZ31—conventional paint with phosphate film, cathodic electrodeposition coating (E-coating), and E-coating pretreated with silane (Mg/silane/E-coating)—have been studied by means of electrochemical impedance spectroscopy (EIS) in a 3.5 wt% NaCl neutral aqueous solution and salt spray test using ASTM B117. Silane film was obtained by dipping AZ31 specimens in diluted hydroalcoholic silanic solutions and successively curing. It was found that the corrosion resistance of the Mg alloy with E-coating was superior to conventional paint and could be further enhanced with silane pretreatment as an interfacial film. The results of water volume fraction (Φ_saturation) and diffusion coefficient (D) also indicated that the Mg/silane/E-coating possessed excellent compactness and corrosion resistance. A model of the corrosion mechanism for Mg/silane/E-coating has been presented through EIS analysis.     

Development of poly(vinylcarbazole)/alumina nanocomposite coatings for corrosion protection of 316L stainless steel in 3.5% NaCl medium

Poly(vinylcarbazole) (PVK) and PVK‐alumina (Al₂O₃) nanocomposite coatings were electrochemically coated on 316 L stainless steel (SS) substrates for corrosion protection of 316 L SS in 3.5 weight (wt) % NaCl medium. The formation of PVK and incorporation of nanoalumina particles in PVK‐Al₂O₃ nanocomposite coatings were confirmed from attenuated total reflectance‐infrared spectroscopy (ATR‐IR). Thermal analysis (TG) results showed enhanced thermal stability for the composites relative to PVK. Incorporation of Al₂O₃ nanoparticles enhanced the micro hardness of PVK coated 316 L SS. The dispersion of alumina nanoparticles was examined via scanning electron microscope (SEM) and tunneling electron microscopy (TEM) and revealed distinct features. The influence of nanoparticles on the barrier properties of PVK and PVK‐Al₂O₃ nanocomposites was evaluated in aqueous 3.5 wt % NaCl by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) studies. The results proved that PVK nanocomposite coatings provided better protection for 316 L SS than PVK coatings. The drastic increase in impedance values is due to the high corrosion resistance offered by the PVK nanocomposite coatings that arises due to the interaction between Al₂O₃ nanoparticles and PVK. The highest corrosion protection shown by the 2 wt % nano Al₂O₃ incorporated PVK composite coatings proved enhanced corrosion resistance compared to PVK. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44937.