Fabrication of a novel holmium(III) PVC membrane sensor based on 4-chloro-1,2-bis(2-pyridinecarboxamido)benzene as a neutral ionophore

This paper introduces the development of an original PVC membrane electrode, based on 4-chloro-1,2-bis(2-pyridinecarboxamido)benzene (CBPB) as a suitable carrier for the Ho³⁺ ion. The electrode presents a Nernstian slope of 19.7 ± 0.3 mV per decade for the Ho³⁺ ions across a broad working concentration range from 1.0 × 10⁻⁶ to 1.0 × 10⁻² M. The lower detection limit was 8.5 × 10⁻⁷ M in the pH range 2.7–9.8, while the response time was rapid (<15 s). Therefore, this potentiometric sensor displayed good selectivity for a number of cations such as alkali, alkaline earth, transition and heavy metal ions. The practical applicability of the electrode was demonstrated by its use as an indicator electrode in the potentiometric titration of Ho³⁺ ions with EDTA and in the determination of F^- in mouth wash samples.     

PVC membrane and coated graphite potentiometric sensors based on 1-phenyl-3-pyridin-2-yl-thiourea for selective determination of iron(III)

The construction and performance characteristics of PVC membrane (PME) and coated graphite (CGE) Fe³⁺ ion selective electrodes based on 1-phenyl-3-pyridin-2-yl-thiourea (PPT) are described. The electrodes exhibit a Nernstian slope of 20.2 ± 0.8 (CGE) and 19.9 ± 0.4 (PME) mV decade⁻¹ of activity in Fe³⁺ ion over a wide concentration range from 3.0 × 10⁻⁷ to 1.0 × 10⁻² M for CGE and 6.9 × 10⁻⁷ to 1.0 × 10⁻² M Fe³⁺ for PME. The lower detection limits by CGE and PME are 2.0 × 10⁻⁷ and 3.9 × 10⁻⁷ M, respectively, in the pH range of 1.8-5.6 for PME and 1.8-5.8 for CGE with a fast response time (<10 s). The standard electrode potentials were determined at different temperatures and used to calculate the isothermal coefficient of the PME. The PME showed the working temperature range of 22-55 °C with isothermal temperature coefficient of 1.33 × 10⁻³ V/°C and it was also used in non-aqueous solvents. The electrodes were successfully applied to determine iron(III) in water samples.     

Theoretical and practical investigations of copper ion selective electrode with polymeric membrane based on N,N′-(2,2-dimethylpropane-1,3-diyl)-bis(dihydroxyacetophenone)

A novel ion-selective poly(vinyl chloride) (PVC) membrane sensor for Cu²⁺ ions based on N,N′-(2,2-dimethylpropane-1,3-diyl)-bis(dihydroxyacetophenone) (NDHA) as a new ionophore was prepared and studied. The best performance was observed for the membrane composition, including 30:65:1:4 (wt%) = PVC:DBP:KTpClPB:NDHA. The electrode showed a good Nernstian slope of 30.0 ± 0.5 mV/decade in a wide linear range activity of 3.0 × 10⁻⁷ to 1.0 × 10⁻² mol dm⁻³ Cu(NO₃)₂ with limit of detection 2.5 × 10⁻⁷. Sensor exhibited a fast response time (t_95% < 10 s) and could be used for about 4 months in the pH range of 3.0–7.4. The proposed potentiometric sensor was found to work satisfactorily in partially non-aqueous media up to 30 (vol%) content of methanol, ethanol and acetone. Applications of this electrode for the determination of copper in real samples, and as an indicator electrode for potentiometric titration of Cu²⁺ ion using EDTA, were reported. In order to predict the extraction ability of NDHA for different metallic ions, the complexes [M(NDHA)] and [M(H₂O)₆] (where M = Cu²⁺, Co²⁺, Hg²⁺, Pb²⁺, Ag⁺, Mg²⁺, Ca²⁺, Mn²⁺, Zn²⁺, Cd²⁺, K⁺ and Al³⁺) were investigated using ab initio theoretical calculations. The metal binding capability was evaluated using the binding energy. Results of our study could be useful for prediction of the extraction power of this Schiff base and could play a guiding role in planning experiments.     

Aqueous mercury precipitation with the synthetic dithiolate, BDTH2

BDTH₂, 1,3-benzenediamidoethanethiol (common name) and closely related derivatives were specifically designed to become insoluble after the formation of linear, covalent bonds to aqueous mercury(II). BDTH₂ (IUPAC nomenclature, N,N′-bis(2-mercaptoethyl)isophthalamide) emerged as the preeminent reagent for the complete precipitation of mercury from water after several years of studies with a wide range of compounds having one, two, three, and four thiol groups. BDTH₂ does not become inactive through oxidation to disulfide and can be applied to mercury-containing water as acidic, basic, and ethanolic solutions. The BDT-Hg precipitate is extremely stable and leaches low-ppm levels of mercury only under extremely acidic and basic conditions. BDTH₂ is also effective in the aqueous precipitation of other soft, divalent metals, such as copper, cadmium, lead, and the main group elements, arsenic and selenium. The insolubility of the BDT-M compounds can be attributed to the presence of strong, non-polar, covalent M-S bonding within a water-insoluble organic framework. BDTH₂ has no known biological toxicity and is being sold as a nutritional supplement under the trade name OSR-1. This review describes the chemistry, precipitation, and leaching studies of BDTH₂ with mercury.     

Construction of barium (II) PVC membrane electrochemical sensor based on 3-deoxy-d-erythro-hexos-2-ulose bis (thiosemicarbazone) as a novel ionophore

In this study, a new ion-selective electrode for Ba²⁺ is described, illustrating 3-deoxy-d-erythro-hexos-2-ulose bis (thiosemicarbazone) (DHUT) in a poly(vinylchloride) (PVC) membrane with benzyl acetate (BA) as a plasticizer and sodium tetraphenyl borate (NaTPB) as an anionic additive. This sensor presented very good selectivity and sensitivity towards the Ba²⁺ ions over a wide variety of cations, including alkali, alkaline earth, transition and heavy metal ions. The electrode revealed a great improvement in the selectivity coefficients for the Ba²⁺ ions in comparison with the formerly reported Ba²⁺ sensors. The proposed electrode exhibited a significantly enhanced response towards the Ba²⁺ ions across the concentration range of 1.0 × 10^− 6-1.0 × 10^− 2 M for the pH variation from 2.6 to 11 with a lower detection limit of 5.6 × 10^− 7 M. Moreover, the sensors displayed the Nernstian slope of 29.6 ± 0.5 mV per decade, having a fast response time within 15 s over the entire concentration range. It could also be used for at least 2 months with no potential divergence. As a result, the developed sensor was successfully applied to the direct barium ion determination in solutions, rock samples and as an indicator electrode in the Ba²⁺ ion potentiometric titration with EDTA.     

Highly selective and sensitive Th<Superscript>4+</Superscript>-PVC-based membrane sensor based on 2-(diphenylphosphorothioyl)-<Emphasis Type="Italic">N</Emphasis>′,<Emphasis Type="Italic">N</Emphasis>′-diphenylacetamide

A Th⁴⁺ ion-selective membrane sensor was fabricated from poly (vinyl chloride) (PVC) matrix membrane containing 2-(diphenylphosphorothioyl)-N′,N′-diphenyl acetamide (DPTD) as a neutral carrier, potassium tetrakis (p-chlorophenyl) borate (KTpClPB) as anionic excluder and o-nitrophenyloctyl ether (NPOE) as a plasticizing solvent mediator. The effects of the membrane composition, pH and additive anionic influence on the response properties were investigated. The sensor, comprising 30% PVC, 63% solvent mediator, 4% ionophore and 3% anionic additive demonstrates the best potentiometric response characteristics. It displays Nernstian behavior (15.2 ± 0.5 mV per decade) over the concentration range 1.0 × 10⁻²–1.0 × 10⁻⁶ M. The detection limit of the electrode is 6.3 × 10⁻⁷ M (∼140 ng/ml). The response time of the electrode is 30 s .The sensor can be used in the pH range 3.0–9.0 for about 6 weeks. The membrane sensor was used as an indicator electrode in the potentiometric titration of Th⁴⁺ ions with EDTA. It was successfully applied to the determination of thorium ions in binary mixture.     

Nd(III)-PVC Membrane Sensor Based on 2-{[(6-aminopyridin-2-yl)imino]methyl}-phenol

We report the development of a novel Nd(III) ion-selective PVC-based membrane sensor, based on 2-{[(6-aminopyridin-2-yl)imino]methyl}phenol (APIMP) as the membrane carrier. The sensor has a Nernstian slope of 19.6±0.3 mV per decade over the concentration range of 1.0× 10⁻⁵−1.0×10⁻² M, and a detection limit of 2.0× 10⁻⁶ M of Nd(III) ions. The potentiometric response of the sensor is independent pH solution in the pH range 3.5–8.5. It has advantages of low resistance, very fast response time (<10 s) and, most importantly, good selectivity with respect to a number of lanthanide ions. Using the proposed membrane sensor in a 6 weeks period caused no significant divergences in its potential response. To assess its analytical applicability the sensor was successfully applied as an indicator electrode in the titration of Nd(III) ion solution with EDTA.     

An unusual H2O2 electrochemical sensor based on Ni(OH)2 nanoplates grown on Cu substrate

In this work, Ni(OH)₂ nanoplates grown on the Cu substrate were synthesized and characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Then a novel Cu-Ni(OH)₂ modified glass carbon electrode (Cu-Ni(OH)₂/GCE) was fabricated and evaluated by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and typical amperometric response (i-t) method. Exhilaratingly, the Cu-Ni(OH)₂/GCE shows significant electrocatalytic activity toward the reduction of H₂O₂. At an applied potential of −0.1 V, the sensor produces an ultrahigh sensitivity of 408.1 μA mM⁻¹ with a low detection limit of 1.5 μM (S/N = 3). The response time of the proposed electrode was less than 5 s. What's more, the proposed sensor displays excellent selectivity, good stability, and satisfying repeatability.     

Electrochemical and thermal studies of Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 (x = 1/12, 1/4, 5/12, and 1/2)

Samples of the layered cathode materials, Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ (x = 1/12, 1/4, 5/12, and 1/2), were synthesized at 900 °C. Electrodes of these samples were charged in Li-ion coin cells to remove lithium. The charged electrode materials were rinsed to remove the electrolyte salt and then added, along with EC/DEC solvent or 1 M LiPF₆ EC/DEC, to stainless steel accelerating rate calorimetry (ARC) sample holders that were then welded closed. The reactivity of the samples with electrolyte was probed at two states of charge. First, for samples charged to near 4.45 V and second, for samples charged to 4.8 V, corresponding to removal of all mobile lithium from the samples and also concomitant release of oxygen in a plateau near 4.5 V. Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ samples with x = 1/4, 5/12 and 1/2 charged to 4.45 V do not react appreciably till 190 °C in EC/DEC. Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ samples charged to 4.8 V versus Li, across the oxygen release plateau, start to significantly react with EC/DEC at about 130 °C. However, their high reactivity is similar to that of Li_0.5CoO₂ (4.2 V) with 1 μm particle size. Therefore, Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ samples showing specific capacity of up to 225 mAh/g may be acceptable for replacing LiCoO₂ (145 mAh/g to 4.2 V) from a safety point of view, if their particle size is increased.     

Nickel complexes bearing 2-(1H-benzo[d]imidazol-2-yl)-N-benzylidenequinolin-8-amines: Synthesis,structure and catalytic ethylene oligomerization

A series of 2-(1H-benzo[d]imidazol-2-yl)-N-benzylidenequinolin-8-amines was synthesized and characterized. They are stable as solids while displaying a tendency to decompose in solution. On reaction with NiCl₂, different coordination pattern sets of L·NiCl₂ or [L₂Ni]²⁺·2Cl⁻ are obtainable in THF or ethanol. When activated by Et₂AlCl, the complexes L·NiCl₂ exhibit good to high catalytic activities and selectivities for 1-C₄ in ethylene oligomerization, while the complexes [L2Ni]²⁺·2Cl⁻ hardly showed any activity, which is attributable to nickel coordination by two ligands barring interaction of ethylene with the metal center.     

Synthesis, characterization and thermal properties of soluble aromatic poly(amide imide)s

Novel diamines such as N,N′-bis(aminoaryl)terephthalamido-2-carboxylic acids (BATCA), which contain primary amine, amide and carboxylic acid groups and are soluble in dilute aqueous NaOH solution, were synthesized by reacting aromatic diamines with trimellitic anhydride chloride in dimethylformamide. Poly(amide imide)s containing 3:1 ratio of amide:imide groups in the polymer chain were prepared by low temperature solution polymerization of BATCAs with isophthaloyl chloride or terephthaloyl chloride in dimethylformamide at 5-10 °C to form poly(amide amic acid)s, and followed by treating with a mixture of triethylamine and acetic anhydride. The PAIs were soluble in polar aprotic solvents like dimethylformamide, dimethylacetamide, dimethylsulphoxide and N-methylpyrrolidone, and have inherent viscosities in the range of 0.30-0.66 dL/g. The PAIs were characterized by IR, ¹H NMR and ¹³C NMR techniques. Thermogravimetric analysis (TGA) has shown that the initial decomposition temperatures of the polymers are in the range of 250-440 °C, depending upon the structures of diamine and diacid chloride. The glass transition temperatures of the PAIs are in the range of 128-320 °C. The IDT and T_g values of the polymers containing terephthaloyl unit are higher by about 20-40 °C than those of the polymers with isophthaloyl unit. BATCA could be utilized for the preparation of thin film composite membranes having PAA/PAI barrier layer on PES by in situ interfacial polymerization with IPC/TPC/TMC.     

CO2 absorption properties of Brønsted acid-base ionic liquid composed of N,N-dimethylformamide and bis(trifluoromethanesulfonyl)amide

The solubilities of CO₂ and the liquid densities in a Brønsted acid-base ionic liquid, [DMFH][Tf₂N], composed of N,N-dimethylformamide (DMF) and bis(trifluoromethanesulfonyl)amide (HTf₂N) have been investigated at high pressures and at different temperatures. The results were compared with those in DMF and a typical 1-butyl-3-methylimidazolium analogue with the same anion, [BMIM][Tf₂N]. The mole fraction scaled solubilities of CO₂ in the three liquids showed a slight increase in the following order, DMF < [DMFH][Tf₂N] < [BMIM][Tf₂N], whereas more remarkable difference was observed in the volume scaled concentrations of CO₂, [BMIM][Tf₂N] < [DMFH][Tf₂N] « DMF, mainly due to the bulkiness of liquid entities.     

Electrochemical and ex situ XRD investigations on (1−x)LiNiO2·xLi2TiO3 (0.05≤x≤0.5)

An attempt to understand the unusual electrochemical behaviors in (1−x)LiNiO₂·xLi₂TiO₃ (0.05≤x≤0.5), an excess initial charge capacity exceeding the oxidation of transitional metal to +4 accompanying the appearance of an irreversible initial charge plateau when x reached 0.075, was performed. The decreased charge-discharge polarization after charging to 4.6 and 4.8 V and increased columbic reversibility after charging to 4.6 V typically for x=0.1 and 0.2, in contrast to charging to 4.4 V, suggested that the excess initial charge capacity possibly did not come mainly from electrolyte decomposition; while ex situ XRD results in the sample with x=0.2 confirmed that Li⁺ were really extracted at the stage of the charge plateau, ruling out the possibility that electrolyte decomposition mainly accounted for the unusual electrochemical behaviors. It was inferred that the species responsible for charge compensation for the excess charge capacity must be oxygen ions in these materials, considering that Ni⁴⁺ and Ti⁴⁺ are generally impossible to be oxidized to a higher valence. Various electrochemical cycling experiments demonstrated that the sample for x=0.05 with high resistant ability to high voltage and temperature is very promising cathode material in view of observed capacity and cycleability from a viewpoint of application.     

New binary (1 − x)Ba(Lu1/2Nb1/2)O3-xPbTiO3 solid solution with morphotropic phase boundary

A new ferroelectric solid solution of (1 − x)Ba(Lu_1/2Nb_1/2)O₃-xPbTiO₃ (BLN-PT) (0 ≤ x ≤ 1) has been synthesized by solid state reactions. Its structure and electric properties have been studied by X-ray diffraction and di-/ferro-electric measurements. Based on the investigation, a partial solid state phase diagram of the binary BLN-PT ceramics system has been established, which exhibits a morphotropic phase boundary (MPB) region in the composition range of 0.64 ≤ x ≤ 0.68. The Curie temperature is measured to be around 250 °C in the vicinity of the MPB region, which is much higher than that of PMNT or PZNT system. The dielectric behavior has been discussed based on Curie-Weiss Law and Lorentz-type quadratic relationship. With increasing PT content, a transformation from relaxor to ferroelectric phase has been demonstrated in the solid solution system.     

Electrocatalytic tandem Knoevenagel–Michael addition of barbituric acids to isatins: Facile and efficient way to substituted 5,5′-(2-oxo-2,3-dihydro-1H-indole-3,3-diyl)bis(pyrimidine-2,4,6-(1H,3H,5H)-trione) scaffold

Electrocatalytic transformation of isatins and barbituric acids in ethanol in an undivided cell in the presence of sodium bromide as an electrolyte results in the formation of substituted 5,5′-(2-oxo-2,3-dihydro-1H-indole-3,3-diyl)bis(pyrimidine-2,4,6(1H,3H,5H)-triones) in 89–95% substance yields and 890–950% current yields. The developed efficient electrocatalytic approach to medicinally relevant 5,5′-(2-oxo-2,3-dihydro-1H-indole-3,3-diyl)bis(pyrimidine-2,4,6(1H,3H,5H)-trione) scaffold is 10 times faster than general chemical method, is beneficial from the viewpoint of diversity-oriented large-scale processes and represents novel example of facile environmentally benign synthetic concept for electrocatalytic tandem reaction strategy.     

X-ray photoelectron spectroscopy and electrochemical behaviour of 4 V cathode, Li(Ni1/2Mn1/2)O2

Layered Li(Ni_1/2Mn_1/2)O₂ was prepared by the solution and mixed hydroxide methods, characterised by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) and studied by cyclic voltammetry (CV) and charge discharge cycling in CC and CCCV modes at room temperature (r.t.) and at 50 °C. The XPS studies show about 8% of Ni³⁺ and Mn³⁺ ions are present in Li(Ni²⁺_1/2Mn_1/2⁴⁺)O₂ due to valency-degeneracy. The compound prepared at 950 °C, 12 h, solution method gives a second cycle discharge capacity of 150 mA h g⁻¹ (2.5-4.4 V) at a specific current of 30 mA g⁻¹ and retains 137 mA h g⁻¹ at the end of 40 cycles. CV shows that the redox process at 3.7-4.0 V corresponds to Ni²⁺↔Ni⁴⁺ and clear indication of Mn^3+/4+ couple was noted at 4.2-4.5 V. The observed capacity-fading (2.5-4.4 V) is shown to be contributed by the polarisation at the end of charging. The cathodic capacity is stable up to 40 cycles in the voltage window, 2.5-4.2 V both at room temperature and 50 °C.     

N-(2-methylpropyl)-(E,E)-2,4-decadienamide a mosquito larvicide fromAchillea millefolium L.

A methanol extract ofAchillea millefolium L. showed activity against 24-hr-old larvae ofAedes triseriatus. Bioassay- and TLC-monitored fractionation yielded a neutral fraction which was refined further by column chromatography to afford the antilarvalN-(2-methlpropyl)-(E,E)-2,4-decadienamide which was identified by spectral methods and through comparisons with a synthesized sample. Isolated and synthesized amides at 5 ppm resulted in 98 and 100% mortality of 24-hr-oldA. triseriatus larvae. TheN-(2-methylpropyl)-amides of decanoic and (E)-2-decenoic acids showed the same order of antilarval activity asN-(2-methylpropyl)-(E,E)-2,4-decadienamide, butN-(2-methylpropyl)sorbamide was inactive.     

One-step electrochemical preparation of the ternary (BixSb1−x)2Te3 thin films on Au(1 1 1): Composition-dependent growth and characterization studies

This study reports on the synthesis of ternary semiconductor (Bi_xSb_1−x)₂Te₃ thin films on Au(1 1 1) using a practical electrochemical method, based on the simultaneous underpotential deposition (UPD) of Bi, Sb and Te from the same solution containing Bi³⁺, SbO⁺, and HTeO₂⁺ at a constant potential. The thin films are characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), energy dispersive spectroscopy (EDS) and reflection absorption-FTIR (RA-FTIR) to determine structural, morphological, compositional and optic properties. The ternary thin films of (Bi_xSb_1−x)₂Te₃ with various compositions (0.0 ≤ x ≤ 1.0) are highly crystalline and have a kinetically preferred orientation at (0 1 5) for hexagonal crystal structure. AFM images show uniform morphology with hexagonal-shaped crystals deposited over the entire gold substrate. The structure and composition analyses reveal that the thin films are pure phase with corresponding atomic ratios. The optical studies show that the band gap of (Bi_xSb_1−x)₂Te₃ thin films could be tuned from 0.17 eV to 0.29 eV as a function of composition.     

Combustion synthesis of (Ti1−xNbx)2AlC solid solutions from elemental and Nb2O5/Al4C3-containing powder compacts

Preparation of the (Ti_1−xNb_x)₂AlC solid solution (formed from the M_n+1AX_n or MAX carbides, where n = 1, 2, or 3, M is an early transition metal, A is an A-group element, and X is C) with x = 0.2-0.8 was investigated by self-propagating high-temperature synthesis (SHS). Nearly single-phase (Ti,Nb)₂AlC was produced through direct combustion of constituent elements. Due to the decrease of reaction exothermicity, the combustion temperature and reaction front velocity decreased with increasing Nb content of (Ti_1−xNb_x)₂AlC formed from the elemental powder compacts. In addition, the samples composed of Ti, Al, Nb₂O₅, and Al₄C₃ were adopted for the in situ formation of Al₂O₃-added (Ti,Nb)₂AlC. The SHS process of the Nb₂O₅/Al₄C₃-containing sample involved aluminothermic reduction of Nb₂O₅, which not only enhanced the reaction exothermicity but also facilitated the evolution of (Ti,Nb)₂AlC. Based upon the XRD analysis, two intermediates, TiC and Nb₂Al, were detected in the (Ti,Nb)₂AlC/Al₂O₃ composite and their amounts were reduced by increasing the extent of thermite reduction involved in the SHS process. The laminated microstructure characteristic of the MAX carbide was observed for both monolithic and Al₂O₃-added (Ti,Nb)₂AlC solid solutions synthesized in this study.