Exciton‐Adjustable Interlayers for High Efficiency,Low Efficiency Roll‐Off,and Lifetime Improved Warm White Organic Light‐Emitting Diodes (WOLEDs) Based on a Delayed Fluorescence Assistant Host

Recently, a new route to achieve 100% internal quantum efficiency white organic light‐emitting diodes (WOLEDs) is proposed by utilizing noble‐metal‐free thermally activated delayed fluorescence (TADF) emitters due to the radiative contributions of triplet excitons by effective reverse intersystem crossing. However, a systematic understanding of their reliability and internal degradation mechanisms is still deficient. Here, it demonstrates high performance and operational stable purely organic fluorescent WOLEDs consisting of a TADF assistant host via a strategic exciton management by multi‐interlayers. By introducing such interlayers, carrier recombination zone could be controlled to suppress the generally unavoidable quenching of long‐range triplet excitons, successfully achieving remarkable external quantum efficiency of 15.1%, maximum power efficiency of 48.9 lm W⁻¹, and extended LT50 lifetime (time to 50% of initial luminance of 1000 cd m⁻²) exceeding 2000 h. To this knowledge, this is the first pioneering work for realizing high efficiency, low efficiency roll‐off, and operational stable WOLEDs based on a TADF assistant host. The current findings also indicate that broadening the carrier recombination region in both interlayers and yellow emitting layer as well as restraining exciplex quenching at carrier blocking interface make significant roles on reduced efficiency roll‐off and enhanced operational lifetime.     

Bipolar Tetraarylsilanes as Universal Hosts for Blue,Green, Orange,and White Electrophosphorescence with High Efficiency and Low Efficiency Roll‐Off

A series of tetraarylsilane compounds, namely p‐BISiTPA ( 1 ), m‐BISiTPA ( 2 ), p‐OXDSiTPA ( 3 ), m‐OXDSiTPA ( 4 ), are designed and synthesized by incorporating electron‐donating arylamine and electron‐accepting benzimidazole or oxadiazole into one molecule via a silicon‐bridge linkage mode. Their thermal, photophysical and electrochemical properties can be finely tuned through the different groups and linking topologies. The para‐disposition compounds 1 and 3 display higher glass transition temperatures, slightly lower HOMO levels and triplet energies than their meta‐disposition isomers 2 and 4 , respectively. The silicon‐interrupted conjugation of the electron‐donating and electron‐accepting segments gives these materials the following advantages: i) relative high triplet energies in the range of 2.69–2.73 eV; ii) HOMO/LUMO levels of the compounds mainly depend on the electron‐donating and electron‐accepting groups, respectively; iii) bipolar transporting feature as indicated by hole‐only and electron‐only devices. These advantages make these materials ideal universal hosts for multicolor phosphorescent OLEDs. 1 and 3 have been demonstrated as universal hosts for blue, green, orange and white electrophosphorescence, exhibiting high efficiencies and low efficiency roll‐off. For example, the devices hosted by 1 achieve maximum external quantum efficiencies of 16.1% for blue, 22.7% for green, 20.5% for orange, and 19.1% for white electrophosphorescence. Furthermore, the external quantum efficiencies are still as high as 14.2% for blue, 22.4% for green, 18.9% for orange, and 17.4% for white electrophosphorescence at a high luminance of 1000 cd m^?2. The two‐color, all‐phosphor white device hosted by 3 acquires a maximum current efficiency of 51.4 cd A^?1, and a maximum power efficiency of 51.9 lm W^?1. These values are among the highest for single emitting layer white PhOLEDs reported till now.     

m‐Indolocarbazole Derivative as a Universal Host Material for RGB and White Phosphorescent OLEDs

The host materials designed for highly efficient white phosphorescent organic light‐emitting diodes (PhOLEDs) with power efficiency (PE) >50 lm W^‐1 and low efficiency roll‐off are very rare. In this work, three new indolocarbazole‐based materials (ICDP, 4ICPPy, and 4ICDPy) are presented composed of 6,7‐dimethylindolo[3,2‐a]carbazole and phenyl or 4‐pyridyl group for hosting blue, green, and red phosphors. Among this three host materials, 4ICDPy‐based devices reveal the best electroluminescent performance with maximum external quantum efficiencies (EQEs) of 22.1%, 27.0%, and 25.3% for blue (FIrpic), green (fac‐Ir(ppy)₃), and red ((piq)₂Ir(acac)) PhOLEDs. A two‐color and single‐emitting‐layer white organic light‐emitting diode hosted by 4ICDPy with FIrpic and Ir(pq)₃ as dopants achieves high EQE of 20.3% and PE of 50.9 lm W^?1 with good color stability; this performance is among the best for a single‐emitting‐layer white PhOLEDs. All 4ICDPy‐based devices show low efficiency roll‐off probably due to the excellent balanced carrier transport arisen from the bipolar character of 4ICDPy.     

Phenylcarbazole‐Based Phosphine Oxide Host Materials For High Efficiency In Deep Blue Phosphorescent Organic Light‐Emitting Diodes

Highly efficient deep blue phosphorescent organic light‐emitting diodes are developed using novel phenylcarbazole‐based phosphine oxide host materials (PPO1 and PPO2). A deep blue phosphorescent dopant, tris((3,5‐difluoro‐4‐cyanophenyl)pyridine) iridium, is doped into PPO1 and PPO2 at a doping concentration of 15% and a high quantum efficiency of 18.4% is obtained with color coordinates of (0.14, 0.15).     

Multifunctional Crosslinkable Iridium Complexes as Hole Transporting/Electron Blocking and Emitting Materials for Solution‐Processed Multilayer Organic Light‐Emitting Diodes

Here, a new series of crosslinkable heteroleptic iridium (III) complexes for use in solution processed phosphorescent organic light emitting diodes (OLEDs) is reported. These iridium compounds have the general formula of (PPZ‐VB)₂Ir(CˆN), where PPZ‐VB is phenylpyrazole (PPZ) vinyl benzyl (VB) ether; and the CˆN ligands represent a family of four different cyclometallating ligands including 1‐phenylpyrazolyl (PPZ) (1), 2‐(4,6‐difluorophenyl)pyridyl (DFPPY) (2), 2‐(p‐tolyl)pyridyl (TPY) (3), and 2‐phenylquinolyl (PQ) (4). With the incorporation of two crosslinkable VB ether groups, these compounds can be fully crosslinked after heating at 180 °C for 30 min. The crosslinked films exhibit excellent solvent resistance and film smoothness which enables fabrication of high‐performance multilayer OLEDs by sequential solution processing of multiple layers. Furthermore, the photophysical properties of these compounds can be easily controlled by simply changing the cyclometallating CˆN ligand in order to tune the triplet energy within the range of 3.0–2.2 eV. This diversity makes these materials not only suitable for use in hole transporting and electron blocking but also as emissive layers of several colors. Therefore, these compounds are applied as effective materials for all‐solution processed OLEDs with (PPZ‐VB)₂IrPPZ (1) acting as hole transporting and electron blocking layer and host material, as well as three other compounds, (PPZ‐VB)₂IrDFPPY ( 2 ), (PPZ‐VB)₂IrTPY(3), and (PPZ‐VB)₂IrPQ( 4 ), used as crosslinkable phosphorescent emitters.     

Pyridine‐Containing Electron‐Transport Materials for Highly Efficient Blue Phosphorescent OLEDs with Ultralow Operating Voltage and Reduced Efficiency Roll‐Off

A series of pyridine‐containing electron‐transport materials are developed as an electron‐transport layer for the FIrpic‐based blue phosphorescent organic light‐emitting diodes. Their energy levels can be tuned by the introduction of pyridine rings in the framework and on the periphery of the molecules. Significantly reduced operating voltage is achieved without compromising external quantum efficiency by solely tuning the nitrogen atom orientations of those pyidine rings. Unprecedented low operating voltages of 2.61 and 3.03 V are realized at 1 and 100 cd m^?2, giving ever highest power efficiency values of 65.8 and 59.7 lm W^?1, respectively. In addition, the operating voltages at 100 cd m^?2 can be further reduced to 2.70 V by using a host material with a small singlet‐triplet exchange energy, and the threshold voltage for electroluminescence can even be 0.2–0.3 V lower than the theoretical minimum value of the photon energy divided by electron charge. Aside from the reduced operating voltage, a further reduced roll‐off in efficiency is also achieved by the combination of an appropriate host material.     

Low Roll‐Off and High Efficiency Orange Organic Light Emitting Diodes with Controlled Co‐Doping of Green and Red Phosphorescent Dopants in an Exciplex Forming Co‐Host

An exciplex forming co‐host is introduced in order to fabricate orange organic light‐emitting diodes (OLEDs) with high efficiency, low driving voltage and an extremely low efficiency roll‐off, by the co‐doping of green and red emitting phosphorescence dyes in the host. The orange OLEDs achieves a low turn‐on voltage of 2.4 V, which is equivalent to the triplet energy gap of the phosphorescent‐green emitting dopant, and a very high external quantum efficiency (EQE) of 25.0%. Moreover, the OLEDs show low efficiency roll‐off with an EQE of over 21% at 10 000 cdm^?2. The device displays a very good orange color (CIE of (0.501, 0.478) at 1000 cdm^?2) with very little color shift with increasing luminance. The transient electroluminescence of the OLEDs indicate that both energy transfer and direct charge trapping takes place in the devices.     

Tetradentate Platinum Complexes for Efficient and Stable Excimer‐Based White OLEDs

A series of tetradentate platinum complexes that exhibit both efficient monomer and excimer emission are synthesized. Via small modifications to the cyclometalating ligands, both the monomer and excimer emission energy can be separately tuned. Devices employing all of the developed emitters demonstrate impressively high external quantum efficiencies (EQEs) within the range of 22% to 27% for concentrations between 2% and 16%. The halogen‐free design of the complexes also enables the fabrication of single, doped, white organic light‐emitting diodes (OLEDs) with long operational lifetimes. A balanced white device employing the complex Pt2O2, achieves a device operational lifetime to 80% of the initial luminance estimated at over 200 h at 1000 cd m^–2, while also achieving 12.5% peak EQE for a warm white light with a color rendering index of 80. Furthermore, a highly doped device exhibiting nearly exclusive excimer emission showed an impressive operational lifetime, which is estimated at more than 400 h for 1000 cd m^‐2.     

New Solution‐Processable Electron Transport Materials for Highly Efficient Blue Phosphorescent OLEDs

Several new solution‐processable organic semiconductors based on dendritic oligoquinolines were synthesized and were used as electron‐transport and hole‐blocking materials to realize highly efficient blue phosphorescent organic light‐emitting diodes (PhOLEDs). Various substitutions on the quinoline rings while keeping the central meta‐linked tris(quinolin‐2‐yl)benzene gave electron transport materials that combined wide energy gap (>3.3 eV), moderate electron affinity (2.55‐2.8 eV), and deep HOMO energy level (<‐6.08 eV) with electron mobility as high as 3.3 × 10^?3 cm² V^?1 s^?1. Polymer‐based PhOLEDs with iridium (III) bis(4,6‐(di‐fluorophenyl)pyridinato‐N,C^2′)picolinate (FIrpic) blue triplet emitter and solution‐processed oligoquinolines as the electron‐transport layers (ETLs) gave luminous efficiency of 30.5 cd A^?1 at a brightness of 4130 cd m^?2 with an external quantum efficiency (EQE) of 16.0%. Blue PhOLEDs incorporating solution‐deposited ETLs were over two‐fold more efficient than those containing vacuum‐deposited ETLs. Atomic force microscopy imaging shows that the solution‐deposited oligoquinoline ETLs formed vertically oriented nanopillars and rough surfaces that enable good ETL/cathode contacts, eliminating the need for cathode interfacial materials (LiF, CsF). These solution‐processed blue PhOLEDs have the highest performance observed to date in polymer‐based blue PhOLEDs.     

Thermally Activated Delayed Fluorescence Material as Host with Novel Spiro‐Based Skeleton for High Power Efficiency and Low Roll‐Off Blue and White Phosphorescent Devices

Efficiency roll‐off in blue organic light‐emitting diodes especially at high brightness still remains a vital issue for which the excitons density‐dependent mechanism of host materials takes most responsibility. Additionally, the efficiency roll‐off leads to high power consumption and reduces the operating lifetime because higher driving voltage and current are required. Here, by subtly modifying the triphenylamine to oxygen‐bridged quasi‐planar structure, a novel thermally activated delayed fluorescence type blue host Tri‐o‐2PO is successfully developed. Efficiency roll‐off based on Tri‐o‐2PO is ultralow with external quantum efficiency (EQE) just dropping by around 2% in the high luminance range from 1000 cd m^?2 to 10 000 cd m^?2. As expected, low turn‐on voltage (≈2.9 V) of device is also achieved, which is close to the theory limit value (≈2.62 V). Super‐high power efficiency (≈60 lm W^?1) and EQE (>22%) are also achieved when utilizing Tri‐o‐2PO as host. Furthermore, two‐color warm‐white light with CIE of (0.45, 0.43) and correlated color temperature of 2921 K is also fabricated and a champion EQE of 21% is delivered. These excellent performances prove the strategy of bridging the triphenylamine to reduce ΔE_st is validated and suggest the great potential of this novel skeleton.     

Crosslinkable TAPC‐Based Hole‐Transport Materials for Solution‐Processed Organic Light‐Emitting Diodes with Reduced Efficiency Roll‐Off

1‐Bis[4‐[N,N‐di(4‐tolyl)amino]phenyl]‐cyclohexane (TAPC) has been widely used in xerography and organic light‐emitting diodes (OLEDs), but derivatives are little known. Here, a new series of solution‐processable, crosslinkable hole conductors based on TAPC with varying highest occupied molecular orbital (HOMO) energies from ?5.23 eV to ?5.69 eV is implemented in blue phosphorescent OLEDs. Their superior perfomance compared with the well‐known N4,N4,N4′,N4′‐tetraphenylbiphenyl‐4,4′‐diamine (TPDs) analogues regarding hole‐injection and mobility, electron and exciton blocking capabilities, efficiency, and efficiency roll‐off is demonstrated. Overall, the TAPC‐based devices feature higher luminous and power efficiency over a broader range of brightness levels and reduced efficiency roll off. A systematic broadening of the emission zone is observed as the hole‐injection barrier between the anode and the hole‐transporting layer increased.     

Phosphorescent Cationic Au4Ag2 Alkynyl Cluster Complexes for Efficient Solution‐Processed Organic Light‐Emitting Diodes

Cationic Au₄Ag₂ heterohexanuclear aromatic acetylides cluster complexes supported by bis(2‐diphenylphosphinoethyl)phenylphosphine (dpep) are prepared. The Au₄Ag₂ cluster structure originating from the combination of one anionic [Au(C≡CR)₂]^? with one cationic [Au₃Ag₂(dpep)₂(C≡CR)₂]³⁺ through the formation of Ag?acetylide η²‐bonds is highly stabilized by Au–Ag and Au–Au contacts. The Au₄Ag₂ alkynyl cluster complexes are moderately phosphorescent in the fluid CH₂Cl₂ solution, but exhibit highly intense phosphorescent emission in solid state and film. As revealed by theoretical computational studies, the phosphorescence is ascribable to significant ³[π (aromatic acetylide) → s/p (Au)] ³LMCT parentage with a noticeable Au₄Ag₂ cluster centered ³[d → s/p] triplet state. Taking advantage of mCP and OXD‐7 as a mixed host with 20 wt% dopant of phosphorescent Au₄Ag₂ cluster complex in the emitting layer, solution‐processed organic light‐emitting diodes (OLEDs) exhibit highly efficient electrophosphorescence with the maximum current, power, and external quantum efficiencies of 24.1 cd A^?1, 11.6 lm W^?1, and 7.0%, respectively. Introducing copper(I) thiocyanate (CuSCN) as a hole‐transporting layer onto the PEDOT:PSS hole‐injecting layer through the orthogonal solution process induces an obvious improvement of the device performance with lower turn‐on voltage and higher electroluminescent efficiency.     

Built‐In Haze Glass‐Fabric Reinforced Siloxane Hybrid Film for Efficient Organic Light‐Emitting Diodes (OLEDs)

Substrates with high transmittance and high haze are desired for increasing the light outcoupling efficiency of organic light‐emitting diodes (OLEDs). However, most of the polymer films used as substrate have high transmittance and low haze. Herein, a facile route to fabricate a built‐in haze glass‐fabric reinforced siloxane hybrid (GFRH) film having high total transmittance (≈89%) and high haze (≈89%) is reported using the scattering effect induced by refractive index contrast between the glass fabric and the siloxane hybrid (hybrimer). The hybrimer exhibiting large refractive index contrast with the glass fabric is synthesized by removing the phenyl substituents. Besides its optical properties, the hazy GFRH films exhibit smooth surface (R_sq = 0.2 nm), low thermal expansion (13 ppm °C⁻¹), high chemical stability, and dimensional stability. Owing to the outstanding properties of the GFRH film, OLED is successfully fabricated onto the film exhibiting 74% external quantum efficiency enhancement. The hazy GFRH's unique optical properties, excellent thermal stability, outstanding dimensional stability, and the ability to perform as a transparent electrode enable them as a wide ranging substrate for the flexible optoelectronic devices.     

The Root Causes of the Limited Stability of Solution‐Coated Small‐Molecule Organic Light‐Emitting Devices: Faster Host Aggregation by Exciton–Polaron Interactions

The degradation mechanism is compared in organic light‐emitting devices (OLEDs) fabricated by solution‐coating to that in vacuum‐deposited OLEDs. Devices comprising various host materials made by vacuum‐deposition or solution‐coating are investigated. Changes in devices electroluminescence (EL) spectra during prolonged electrical driving are compared and analyzed. Hole‐only devices are also utilized, and employed to study the effects of charges and excitons, separately and combined. The results reveal that the faster degradation of solution‐processed devices relative to their vacuum‐deposited counterparts under electrical stress is due to a faster aggregation of the host materials. Interactions between excitons and polarons in the emitting layers of the devices induce this aggregation phenomenon. Although this phenomenon affects both vacuum‐deposited and solution‐coated emitting layers, it is found to occur much faster in the later. The findings shed light on the root causes of the limited stability of solution‐processed OLEDs.     

Interlayer Engineering with Different Host Material Properties in Blue Phosphorescent Organic Light‐Emitting Diodes

We investigated the light‐emitting performances of blue phosphorescent organic light‐emitting diodes, known as PHOLEDs, by incorporating an N,N’‐dicarbazolyl‐3,5‐benzen interlayer between the hole transporting layer and emitting layer (EML). We found that the effects of the introduced interlayer for triplet exciton confinement and hole/electron balance in the EML were exceptionally dependent on the host materials: 9‐(4‐tert‐butylphenyl)‐3.6‐bis(triphenylsilyl)‐9H‐carbazole, 9‐(4‐tert‐butylphenyl)‐3.6‐ditrityl‐9H‐carbazole, and 4,4’‐bis‐triphenylsilanyl‐biphenyl. When an appropriate interlayer and host material were combined, the peak external quantum efficiency was greatly enhanced by over 21 times from 0.79% to 17.1%. Studies on the recombination zone using a series of host materials were also conducted.     

Versatile,Benzimidazole/Amine‐Based Ambipolar Compounds for Electroluminescent Applications: Single‐Layer,Blue, Fluorescent OLEDs,Hosts for Single‐Layer,Phosphorescent OLEDs

A series of compounds containing arylamine and 1,2‐diphenyl‐1H‐benz[d]imidazole moieties are developed as ambipolar, blue‐emitting materials with tunable blue‐emitting wavelengths, tunable ambipolar carrier‐transport properties and tunable triplet energy gaps. These compounds possess several novel properties: (1) they emit in the blue region with high quantum yields; (2) they have high morphological stability and thermal stability; (3) they are capable of ambipolar carrier transport; (4) they possess tunable triplet energy gaps, suitable as hosts for yellow‐orange to green phosphors. The electron and hole mobilities of these compounds lie in the range of 0.68–144 × 10^?6 and 0.34–147 × 10^?6 cm² V^?1 s^?1, respectively. High‐performance, single‐layer, blue‐emitting, fluorescent organic light‐emitting diodes (OLEDs) are achieved with these ambipolar materials. High‐performance, single‐layer, phosphorescent OLEDs with yellow‐orange to green emission are also been demonstrated using these ambipolar materials, which have different triplet energy gaps as the host for yellow‐orange‐emitting to green‐emitting iridium complexes. When these ambipolar, blue‐emitting materials are lightly doped with a yellow‐orange‐emitting iridium complex, white organic light‐emitting diodes (WOLEDs) can be achieved, as well by the use of the incomplete energy transfer between the host and the dopant.     

Highly Efficient Greenish‐Yellow Phosphorescent Organic Light‐Emitting Diodes Based on Interzone Exciton Transfer

Phosphorescent organic light emitting diodes (PHOLEDs) have undergone tremendous growth over the past two decades. Indeed, they are already prevalent in the form of mobile displays, and are expected to be used in large‐area flat panels recently. To become a viable technology for next generation solid‐state light source however, PHOLEDs face the challenge of achieving concurrently a high color rendering index (CRI) and a high efficiency at high luminance. To improve the CRI of a standard three color white PHOLED, one can use a greenish‐yellow emitter to replace the green emitter such that the gap in emission wavelength between standard green and red emitters is eliminated. However, there are relatively few studies on greenish‐yellow emitters for PHOLEDs, and as a result, the performance of greenish‐yellow PHOLEDs is significantly inferior to those emitting in the three primary colors, which are driven strongly by the display industry. Herein, a newly synthesized greenish‐yellow emitter is synthesized and a novel device concept is introduced featuring interzone exciton transfer to considerably enhance the device efficiency. In particular, high external quantum efficiencies (current efficiencies) of 21.5% (77.4 cd/A) and 20.2% (72.8 cd/A) at a luminance of 1000 cd/m² and 5000 cd/m², respectively, have been achieved. These efficiencies are the highest reported to date for greenish‐yellow emitting PHOLEDs. A model for this unique design is also proposed. This design could potentially be applied to enhance the efficiency of even longer wavelength yellow and red emitters, thereby paving the way for a new avenue of tandem white PHOLEDs for solid‐state lighting.     

Blue Single‐Layer Organic Light‐Emitting Diodes Using Fluorescent Materials: A Molecular Design View Point

Since the beginning of organic light‐emitting diodes (OLEDs), blue emission has attracted the most attention and many research groups worldwide have worked on the design of materials for stable and highly efficient blue OLEDs. However, almost all the high‐efficiency blue OLEDs using fluorescent materials are multilayer devices, which are constituted of a stack of organic layers to improve the injection, transport, and recombination of charges within the emissive layer. Although the technology has been mastered, it suffers from real complexity and high cost and is time‐consuming. Simplifying the multilayer structure with a single‐layer one, the simplest devices made only of electrodes and the emissive layer have appeared as an appealing strategy for this technology. However, removing the functional organic layers of an OLED stack leads to a dramatic decrease of the performance and achieving high‐efficiency blue single‐layer OLEDs requires intense research especially in terms of materials design. Herein, an exhaustive review of blue emitting fluorophores that have been incorporated in single‐layer OLEDs is reported, and the links between their electronic properties and the device performance are discussed. Thus, a structure/properties/device performance relationship map is drawn, which is of interest for the future design of organic materials.