Up-conversion luminescence of Er~(3+)-doped and Yb~(3+)/Er~(3+) co-doped 12CaO·7Al_2O_3 poly-crystals

The optical properties of Er3+-doped and Yb3+/Er3+ co-doped 12CaO·7Al2O3 (C12A7) poly-crystals, synthesized by high temperature solid state method, were investigated in detail. For Er3+-doped and Yb3+/Er3+ co-doped C12A7 poly-crystals, two main emission bands centered around 530/550 nm (green) and 660 nm (red) were observed under 980 nm diode laser excitation via an up-conversion process. The intensity of green up-conversion emission had a strong increase in Er3+ (1.0 mol.%, 1.5 mol.%, 3.0 mol.%), and the i...     

Up-conversion luminescence properties of Yb^3＋ and Ho^3＋ co-doped Bi3.84W0.16O6.24 powder synthesized by hydrothermal method

Using polyethylene glycol (PEG) as the surfactant, Bi3.84W0.16O6.24 up-conversion luminescence nano-crystal co-doped with Yb3+ and Ho3+ ions was synthesized by the hydrothermal method. The structure and properties of luminescence powder were studied by X-ray diffraction (XRD) and scanning electron microscope (SEM). It was of cubic system when the sample was synthesized at a low temperature and the particle size was about 30 nm. The results showed that adding surfactants was useful to improve the powder agglomeration and the grain crystal was spherical. The green emission peak at 546 nm and red emission peak at 655 nm, corresponding to the ( 5F4, 5S2)→ 5 I 8 and the 5 F 5 → 5 I 8 transitions of Ho 3+ , respectively, were simultaneously observed at room temperature under excitation of 980 nm semiconductor laser. The up-conversion luminescence intensity was the strongest when the concentration ratio of Yb3+ /Ho3+ was 6:1 and the concentration of Ho 3+ ion was 1.5 mol.%. The up-conversion mechanism was also studied. The green and red emission peaks were the two-photon absorption according to the relationship between the pump power and the luminescence intensity.     

Up-conversion of Er3＋/yb3＋ co-doped transparent glass-ceramics containing Ba2LaF7 nanocrystals

The up-conversion of Er3+/Yb3+co-doped transparent glass-ceramics 50SiO2-10AlF3-5TiO2-30BaF2-4LaF3-0.5ErF3-0.5YbF3 containing Ba2 LaF7 nanocrystals under the changing of heat treatment temperature and time were investigated.The Ba2 LaF7 nanocrystals precipitated from the glass matrix was confirmed by X-ray diffraction(XRD).The structural investigation carried out by XRD and transmission electron microscopy(TEM) evidenced the formation of cubic Ba2 LaF7 nanocrystals with crystal size of about 14 nm.Comparing with the samples before heat treatment,the high efficiency up-conversion emission of Er3+/Yb3+co-doped samples was observed in the glass-ceramics under 980 nm laser diode excitation.The increase in red emission intensity bands was stronger than the green bands when the crystal size increased.The mechanism for the up-conversion process in the glass-ceramics and the reasons for the increase of Er3+/Yb3+co-doped up-conversion intensity after heat treatment were discussed.     

Preparation and luminescence properties of BaWO4：yb3＋/Tm3＋ nano-crystal

This research investigated the effect of different contents of Tm3+and different concentration ratios of Yb/Tm on the lumi-nescent properties of BaWO4:Yb3+/Tm3+nano-crystal synthesized by the hydrother...     

Energy transfer in Tb~（3＋）,Yb~（3＋） codoped Lu_2O_3 near-infrared downconversion nanophosphors

Tb3+ and Yb3+ codoped Lu2O3 nanophosphors were synthesized by the reverse-strike co-precipitation method. The obtained Lu2O3:Tb3+,Yb3+ nanophosphors were characterized by X-ray diffraction (XRD) and photoluminescence (PL) spectra. The XRD results showed that all the prepared nanophosphors could be readily indexed to pure cubic phase of Lu2O3 and indicated good crystallinity. The Tb3+→Yb3+ energy transfer mechanisms in the UV-blue region in Lu2O3 nanophosphors were investigated. The experimental results showed that the strong visible emission around 543 nm from Tb3+ (5D4→7F5) and near-infrared (NIR) emission around 973 nm from Yb3+ (2F5/2→2F7/2) of Lu2O3:Tb3+,Yb3+ nanophosphors were observed under ultraviolet light excitation, respectively. Tb3+ could be effectively excited up to its 4f75d1 state and relaxed down to the 5D4 level, from which the energy was transferred cooperatively to two neighboring Yb3+. The Yb3+ concentration dependent luminescent properties and lifetimes of both the visible and NIR emissions were also studied. The lifetime of the visible emission decreased with the increase of Yb3+ concentration, verifying the efficient energy transfer from the Tb3+ to the Yb3+. Cooperative energy transfer (CET) from Tb3+ to Yb3+ was discussed as a possible mechanism for the near-infrared emission. When doped concentrations were 1 mol.% Tb3+ and 2 mol.% Yb3+, the intensity of NIR emission was the strongest.     

12CaO·7Al2O3 炉渣与合金钢液的反应

 12CaO·7Al2O3炉渣组成为w(SiO2)=6%,w(Al2O3)=46%,w(CaO)=48%,与合金结构钢钢液进行了实验室试验。结果表明,该渣具有很高的碱度,90 min反应结束后钢中w(TO)=0000 6%~0001 3%,w(S)=0000 4%~0001 0%。同时得出为控制钢中总氧含量应将炉渣碱度控制在9左右,钢中生成的夹杂物大都是低熔点、球状、尺寸很小的钙镁铝硅酸盐类夹杂物,这类夹杂物能够避免钢材产生各向异性,并且在轧制时能够稍许变形,能够提高钢材的抗疲劳性能。     

Structural and optical studies of Yb^3＋, Er^3＋ and Er^3＋/Yb^3＋ co-doped phosphate glasses

Phosphate glass samples with various Yb2O3 and Er2O3 contents were synthesized by the conventional melt quenching technique and characterized by X-ray diffraction,IR absorption spectroscopy and Raman scattering spectroscopy.The absorption,emission spectra and fluorescence decay studies were carried out both at low and room temperatures.Results showed the existence of several sites occupied by the rare earth ions in the phosphate glass.Up-conversion and cooperative fluorescence were also discussed.     

12CaO·7Al2O3基精炼渣脱硫试验

在试验室用MoSi₂井式电阻炉试验研究了12CaO·7Al₂O_O3的预熔工艺和含10%～20%BaO、2%～6%MgO、1%～3%Li₂O,（12CaO·7Al₂O₃）/SiO₂=8～10的12CaO·7Al₂O₃基精炼渣对成分为（%）0.23C、1.29Mn、0.44Si、0.026P、0.023S、0.04Mo、0.02Cr、0.06Cu的低碳钢的脱硫能力。结果表明,12CaO·7Al₂O₃基预熔精炼渣具有较好的脱硫能力,在1 590℃加入量为3%的条件下,能将钢液中的硫含量从0.030%降低到0.006%,脱硫率80.00%。通过运用正交方法对渣成分进行优化,得出12CaO·7A国₂O₃基精炼渣的优化渣系为:15%BaO,4%MgO,3%Li₂O,（12CaO·7Al₂O₃）/SiO₂=9。     

Preparation and upconversion luminescence of monodisperse Gd2O3：Ho^3＋,Yb^3＋ nanocrystals

Gd2O3:Ho3+,Yb3+ nanocrystals were synthesized via solvothermal method.X-ray diffraction(XRD),transmission electron microscopy(TEM),absorption and upconversion spectra were employed to characterize the synthesized nanocrystals.The results of XRD and TEM showed that obtained Gd2O3:Ho3+,Yb3+ nanocrystals were cubic in crystal structure and uniform spherical in morphology.The average crystallite size was calculated to be 7.5 nm.Green and red up-conversion emissions corresponding to(5F4,5S2)→5I8 and 5F5 → 5I8 transition were observed upon 980 nm excitation at room temperature.The results indicated that both green and red luminescence were based on the two-photon processes.Laser power and doping concentration dependence of the upconverted emissions were studied to understand the upconversion mechanisms.Excited state absorption and energy-transfer processes were discussed as the possible mechanisms for the visible emissions.     

Improvement of conversion efficiency of silicon solar cells using up-conversion molybdate La_2Mo_2O_9：Yb,R （R=Er, Ho） phosphors

The goal of this work was aimed to improve the power conversion efficiency of single crystalline silicon-based photovoltaic cells by using the solar spectral conversion principle, which employs an up-conversion phosphor to convert a low energy infrared photon to the more energetic visible photons to improve the spectral response. In this study, the surface of multicrystalline silicon solar cells was coated with an up-conversion molybdate phosphor to improve the spectral response of the solar cell in the near-infrared spectral range. The short circuit current (Isc), open circuit voltage (Voc), and conversion efficiency (η) of spectral conversion cells were measured. Preliminary experimental results revealed that the light conversion efficiency of a 1.5%-2.7% increase in Si-based cell was achieved.     

Upconversion luminescence of Y2O3：Er^3＋ ,Yb^3＋ nanoparticles prepared by a homogeneous precipitation method

Y2O3： Er^3＋, Yb^3＋ nanoparticles were synthesized by a homogeneous precipitation method without and with different concentrations of EDTA 2Na. Upconversion luminescence spectra of the samples were studied under 980 nm laser excitation. The results of XRD showed that the obtained Y2O3：Er^3＋,Yb^3＋ nanoparticles were of a cubic structure. The average crystallite sizes calculated were in the range of 28-40 nm. Green and red upconversion emission were observed, and attributed to ^2H11/2,^4S3/2→^4I15/2 and ^4F9/2→^4I15/2 transitions of the ion, respectively. The ratio of the intensity of green emission to that of red emission drastically changed with a change in the EDTA 2Na concentration. In the sample synthesized without EDTA, the relative intensity of the green emission was weaker than that of the red emission. The relative intensities of green emission increased with the increased amount of EDTA 2Na used. The possible upconversion luminescence mechanisms were discussed.     

Local microstructure and photoluminescence of Er-doped 12CaO·7Al2O3 powder

Er-doped 12Ca0.7Al2O3 （C12A7：Er） powders were prepared using the sol-gel method followed by annealing inorganic precursors. X-ray diffraction （XRD）, Raman and absorption spectra revealed that Er ions existed and substituted Ca^2＋ lattice site in C12A7. The photoluminescence of C12A7：Er at room temperature was observed in the visible and infrared region using 488 nm （2.54 eV） Ar^＋ line as excitation source, respectively. The sharp and intense green emission bands with multi-peaks around 520 nm and 550 nm correspond to the transitions from the excited states ^2H11/2 and ^4S3/2 tO the ground state ^4I15/2, respectively. Furthermore, red emission band around 650 nm was also observed. It was attributed to the electronic transition from excited states ^4F9/2 to the ground state ^4I15/2 inside 4f-shell of Er^3＋ ions. The intensive infrared emission at 1.54 μm was attributed to the transition from the fast excited states of ^4I13/2 to the ground state （^4I15/2）. The temperature dependent photoluminescence of infrared emission showed that the integrated intensity reached a maximum value at near room temperature. The forbidden transitions of intra-4f shell electrons in free Er^3＋ ions were allowed in C12A7 owing to lack of the inversion symmetry in the Er^3＋ position in C12A7 crystal field. Our results suggested that C12A7：Er was a candidate for applications in Er-doped laser materials, and full color display.     

Up-conversion luminescence of Tm3+/Yb3+ co-doped oxy-fluoride glasses

The oxy-fluorosilicate glasses co-doped with Yb3+/Tm3+ were prepared.The absorption spectra were recorded.The Tm3+ ion showed two absorption bands,with one at 774 nm due to 1G4→3H6 transition and the other at 667 nm due to 1G4→3F4 transition.The energy transfer between Tm3+ ion and Yb3+ ion and the up-conversion fluorescence of Tm3+ ion were investigated using 980 nm LD excitation.The results showed that the blue and red emissions were three-photon absorption processes corresponding with 1G4→3H6 and 1G4→3F4...     

Quenching mechanism of Er^3＋ emissions in Er^3＋-and Er^3＋/Yb^3＋-doped SrAl12O19 nanophosphors

Nanoscaled SrAl12O19:Er3+ and SrAl12O19:Yb3+,Er3+ phosphors were synthesized by a combustion method.The emission intensities of every sample were compared by a new method with the emission of codoped Gd3+ ions as a reference.Compared with their bulk material prepared by the solid-state reaction method,a higher Er3+ quenching concentration,as high as 20%,was observed in the nanoscaled phosphors for both visible(VIS) and near infrared(NIR) emissions.The higher quenching concentration in both VIS and NIR regions for nanoscaled samples are related to the structure characteristics of the nano particles.The influence of the introduction of Yb3+ ions on the emission spectra intensity was also investigated and discussed.     

Vacuum ultraviolet excited photoluminescence properties of Gd2O2CO3：Eu^3＋ phosphor

The Gd2O2CO3：Eu^3＋ with type-Ⅱ structure phosphor was successfully synthesized via flux method at 400 ℃ and their photoluminescence properties in vacuum ultraviolet （VUV） region were examined. The broad and strong excitation bands in the range of 153-205 nm owing to the CO3^2- host absorption and charge transfer （CT） of Gd^3＋-O2^- were observed for Gd2O2CO3：Eu^3＋. Under 172 nm excitation, Gd2O2CO3：Eu^3＋ exhibited strong red emission with good color purity, indicating Eu^3＋ ions located at low symmetry sites and the chromaticity coordination of luminescence for Gd2O2CO3：Eu^3＋ was （x=0.652, y=0.345）. The photoluminescence quenching concentration of Eu^3＋ excited by 172 nm for Gd2O2CO3：Eu^3＋ was about 5%. Gd2O2CO3：Eu^3＋ would be a potential VUV-excited red phosphor applied in mercury-free fluorescent lamps.     

Extracting structural information from low symmetry crystal field parameterscase study： Er3＋ and Nd3＋ ions in YAIO3

The experimental monoclinic CF parameter (CFP) sets obtained by Duan et al. (Phys. Rev. B 75 (2007) 195130) for Er³⁺ and Nd³⁺ ions in YAlO₃ were reanalyzed. These CFPs fitted using R-approach, i.e. with the monoclinic second-rank CFP set to zero, and additionally with one six-rank CFP fixed to zero, turned out to be non-standard. In order to understand better the low symmetry aspects involved in the fitted CFPs and extract useful structural information inherent in monoclinic CFPs, an approach comprising four methods was utilized. First, superposition model (SPM) was applied to calculate CFPs in the crystallographic axis system. Second, the principal values for the SPM determined CFPs and the orientation of the principal axis system w.r.t. the crystallographic axis system were obtained using the procedure 3DD for diagonalization of the 2^nd-rank CFPs. Third, analysis of higher symmetry approximations, i.e. orthorhombic and tetragonal, was carried out using the pseudosymmetry axes method. Fourth, the closeness factors and norm ratios were employed for quantitative comparisons of various CFP sets. Partial results for Er³⁺ ions in YAlO₃ were presented here, whereas detailed results would be given in a follow-up paper.     

Luminescent properties of β-Lu2Si2O7:RE(RE=Ce, Tb) nanoparticles by sol-gel method

Nanoscale RE³⁺ (RE=Ce, Tb) doped and codoped lutetium pyrosilicate Lu₂Si₂O₇ (LPS) phosphors were prepared by using the sol-gel method. Heat treatment was performed in the temperature range from 900 to 1100 °C. The crystal structure was analyzed by X-ray diffraction (XRD). The results showed that the β-type structure of LPS was obtained at 1100 °C. The excitation spectra in the UV and VUV ranges and the emission spectra of the samples were measured at room temperature, and their luminescent properties were studied. The energy transfer from Ce³⁺ to Tb³⁺ in the codoped samples were observed and discussed.     

Luminescence investigation of Eu~（3＋）-Bi~（3＋） co-doped CaMoO_4 phosphor

A series of Eu³⁺-Bi³⁺ co-doped CaMoO₄ red phosphors were synthesized via the solid-sate reaction method. The crystal structures of the obtained samples were identified by X-ray powder diffraction (XRD). The photoluminescence property was investigated, and the results showed that the intensity of excitation spectra and emission spectra could be changed with different doping ratios of Bi³⁺/Eu³⁺. The proposed explanation of these changes was from the energy transfer between Bi³⁺ and Eu³⁺ and the unbalanced charge from the substitution of Eu³⁺ and Bi³⁺ for Ca²⁺ in CaMoO₄. The obtained samples are a promising red light emitting phosphor for the needs of different excitation sources with near-UV and blue GaN-based chips.     

Partial oxidation of methane on Ni/CeO2-ZrO2/γ-Al2O3 prepared using different processes

The influences of CeO2-ZrO2 and γ-Al2O3 mixing methods on the catalytic activity and stability of partial oxidation of methane （POM） were investigated over Ni/Ce0.7Zr0.3O2-Al2O3 catalysts. The catalysts were characterized by XRD, TPR, H2-chemsorption, and TG-DTA. For fresh catalysts, the results showed that the salt precursor mixing catalyst （ATOM） presented better performance than the catalysts prepared by the precipitator mixing method （MOL） and the powder mechanically mixing method （MECH）. The result of XRD suggested that the interaction between CeO2-ZrO2 and Al2O3 in ATOM sample was stronger than the others, which led to more lattice defects and thereby better initial activity. Moreover, the MECH sample had the best stability and the least coke deposition in 24 h stability tests. The results of TPR and H2-chemsorption indicated that the intimate contact of Ni-Al in MECH sample enhanced the ability of resisting coke deposition and metal sintering.