首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Feng Zhang  Zhiming Cui  Lei Dai 《Polymer》2008,49(15):3272-3278
A series of novel sulfonated poly(arylene-co-binaphthalimide)s (SPPIs) were successfully synthesized via Ni(0) catalytic coupling of sodium 3-(2,5-dichlorobenzoyl)benzenesulfonate and bis(chloronaphthalimide)s. Bis(chloronaphthalimide)s were conveniently prepared from 5-chloro-1,8-naphthalic anhydride and various diamines. Tough and transparent SPPI membranes were prepared and the electrolyte properties of the copolymers were intensively investigated as were the effects of different diamine structures on the copolymer characterisitics. The copolymer membrane Ia-80, with an ion exchange capacity (IEC) of 2.50 meq g−1, displayed a higher proton conductivity, i.e. 0.135 S cm−1 at 20 °C, as compared to Nafion 117 (0.09 S cm−1, 20 °C). The copolymer membrane Id-70, containing 3,3′-dimethyl-4,4′-methylenedianiline (DMMDA) units, exhibited excellent stability toward water and oxidation due to the introduction of hydrophobic methyl groups on the ortho-position of the imido bond in the copolymer. The mechanical property of Id-70 remained virtually unchanged after immersing membrane in pressured water at 140 °C for 24 h. Furthermore, the introduction of aliphatic segment a hexane-1,6-diamine (HDA) in copolymer led to a significant increase in proton conductivity and water uptake with increasing temperature; the proton conductivity of the Ic-70 membrane reached 0.212 S cm−1 at 80 °C, which was higher than Nafion 117 as well as of the membranes based on aromatic diamines at equivalent IEC values. Consequently, these materials proved to be promising as proton exchange membranes.  相似文献   

2.
Polyiodides (Ix, x = 3 and 5) and 2I…I2 adducts were established from the Raman spectra study of 1-methyl-3-propylimidazolium iodide (MPIm+Ix; 1 ≤ x ≤ 5) ionic liquids containing various amounts of iodine (0 mol ≤ I2 ≤ 2 mol). The existence of I3 and 2I…I2 was established for 1 ≤ x ≤ 2.5, symmetric I3 ions for x = 3, while linear and discrete I5 was substantiated for 3 ≤ x ≤ 5. The presence of polyiodide species in MPIm+Ix (1 ≤ x ≤ 5) was correlated with an enhanced ionic conductivity, attributed to the established relay-type Grotthus mechanism. Two-step conductivity increase was also reflected in decrease of the hydrogen bond interactions between the CH ring groups and polyiodides. While in the concentration range 1 ≤ x ≤ 3 (triiodides and tetraiodides) IR bands changed only slightly in intensity, in the concentration range x > 3 the CH stretching bands (3040-3170 cm−1) split and the new band at 1585 cm−1 appeared in the IR spectra beside the already existing Im+ ring stretching mode at 1566 cm−1.  相似文献   

3.
Poly(aniline-co-2-amino-4-hydroxybenzenesulfonic acid) (PAAHB) was synthesized using chemical oxidative copolymerization of aniline and 2-amino-4-hydroxybenzenesulfonic acid (AHB) in the presence of an ionic liquid at 50 °C. The conductivity of the PAAHB copolymer synthesized at the optimum conditions is 0.47 S cm−1 that is lower than that of polyaniline, but is slightly affected by water. The cyclic voltammograms demonstrate that the PAAHB copolymer has excellent redox activity from highly acidic solution to pH 12.0 in a wider potential range. This is attributed to the synergistic effect of the SO3 and OH functional groups in the copolymer chain and the ionic liquid incorporated into the PAAHB film. It is evident that the pH dependence of the redox activity and conductivity of the PAAHB copolymer prepared chemically is much better than that of polyaniline, and is further improved, compared to the PAAHB copolymer prepared electrochemically. The proton NMR spectrum of the PAAHB copolymer demonstrates that the SO3 group exists in the copolymer chain instead of the SO3H group. The ESR spectra show that the ESR signal intensity is a function of the monomer concentration ratio of AHB to aniline in the mixture. The morphology of the PAAHB copolymer is also dependent on the monomer concentration ratio in the mixture.  相似文献   

4.
Hua-Xiao Yang 《Polymer》2009,50(6):1533-38
Water diffusion process in biodegradable poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx, HHx = 12 mol%) was investigated by generalized 2D correlation time-resolved ATR-FTIR spectroscopy based on the analysis of v(OH) stretching and δ(OH) bending bands of water as well as v(CO) and v(C-O-C) stretching bands of PHBHHx. Three states of water were figured out during water diffusion process. They are bulk water, bound water and free water. The water diffusion mechanism was suggested as: water molecules firstly diffuse into the micro-voids in bulk water form or are dispersed on the surface in free water form, and then penetrate into the polymer matrix in hydrogen bound water with the hydrophilic groups of PHBHHx. Moreover, water molecules diffuse into the loose amorphous phase and then into compact crystalline phase. Water diffusion coefficient in PHBHHx was thus evaluated as 7.8 ± 0.7 × 10−8 cm2 s−1 for the PHBHHx with crystallinity of 16.2 ± 0.3% at 293 K.  相似文献   

5.
The potential-dependent chemical reaction of perchloroethylene (PCE) on copper in neutral noncomplexing aqueous media is explored by means of surface-enhanced Raman spectroscopy (SERS), linear sweep voltammetry and preparative electrolysis at controlled potential. Voltammetric peaks associated with copper oxide reduction in Na2SO4 solution in the presence and the absence of Cl are correlated with simultaneously acquired SER spectra. Perchloroethylene undergoes a dechlorination process at potentials at E ≤ −0.3 V vs. Ag/AgCl/KCl (3 M), as shown by the emergence of an intense CuCl stretching band at 290 cm−1 and a CH stretching band together with the presence of Cl in the catholyte. In the potential region between 0 and −0.9 V vs. Ag/AgCl/KCl (3 M) a broad band assigned to CC structures is observed in the triple-bond region (∼1900 cm−1, FWHM = 180 cm−1). In addition, dichloroethylene (DCE) is detected (but not trichloroethylene (TCE)) in this potential region during preparative electrolysis. At potentials lower than −1 V vs. Ag/AgCl/KCl (3 M) carbon residues are the main product, detected on the copper surface by SERS (and confirmed by XPS), whereas in solution higher levels of dichloroethylene and trichloroethylene are detected with a DCE/TCE ratio below 1.  相似文献   

6.
The structure, dispersibility, and crystallinity of poly(3-hydroxybutyrate) (PHB) and poly(l-lactic acid) (PLLA) blends are investigated by using Raman microspectroscopy. Four kinds of PHB/PLLA blends with a PLLA content of 20, 40, 60, and 80 wt% were prepared from chloroform solutions. Differences in the Raman microspectroscopic spectra between the spherulitic and nonspherulitic parts in the blends mainly lie in the CO stretching band and C-O-C and C-C skeletal stretching bands of PHB and PLLA. In addition to such bands, the Raman spectra of spherulitic structure in the blends show a band due to the CH3 asymmetric stretching mode at an unusually high frequency (3009 cm−1), suggesting the existence of a C-H?OC hydrogen bond of PHB in the spherulite. The existence of C-H?OC hydrogen bond is one of the unambiguous evidence for the crystallization of PHB component in the blends. Therefore, it is possible to distinguish Raman bands due to each component in the spectra of blends. Raman spectra of the spherulitic structure in the blends are similar to a Raman spectrum of pure crystalline PHB, while those of the nonspherulitic parts in the blends have each component peak of PHB and PLLA. The present study reveals that the PHB component is crystallized in the blends irrespective of the blend ratio, and that both components are mixed in the nonspherulite parts. The crystalline structure of PHB and the nonspherulitic parts of PLLA in the blends are characterized, respectively, by the unique band of C-H?OC hydrogen bond at 3009 cm−1 and CCO deformation bands near 400 cm−1.  相似文献   

7.
7Li and 19F NMR linewidths and impedance spectra are reported for low-dimensional CmOn (I):LiBF4 mixtures. Data for the ionophilic polymer C18O5 is compared with that for the ionophobic C18O1 and the block copolymer C16O1O5(21%) (21 mol% of C16O5). In C18O5:LiBF4 (1:1) narrow 7Li linewidths, which were observed in the liquid crystal phase above the side chain melting temperature (∼50 °C), persist in the crystal down to ca. 0 °C and broaden below −20 °C. However, in C18O1:LiBF4 (1:0.6) narrow 7Li linewidths were also observed down to −20 °C suggesting highly mobile neutral aggregates of salt since this system is non-conductive. In the copolymer C16O1O5(21%):LiBF4 (1:0.7) the linewidths were even narrower down to −70 °C with weak temperature dependence. In all systems 19F linewidths were significantly broader than 7Li linewidths. The complex plane plots obtained by impedance spectroscopy exhibit characteristic minima identified with ‘grain boundary’ resistance and, following heat treatment, minima with weak temperature dependence identified with ‘internal crystal’ resistance, Ri, and conductivities, σi ≥ 10−4 S cm−1. Four-component mixtures of copolymers CmO1O5 and CmO1O4 with LiBF4 and ‘salt-bridge’ poly(tetramethylene oxide)-dodecamethylene copolymers gave conductivities of ca. 4 × 10−4 S cm−1 at 20 °C with weak temperature dependence. A novel carrier-hopping mechanism of lithium transport decoupled from side chain melting in the crystalline state is postulated.   相似文献   

8.
A copolymer of anti-5,15-bis([2′,2″:5″,2″′-terthiophene]-3″-yl)-2,8,12,18-tetra-n-butyl-3,7,13,17-tetramethylporphyrin (1) with 2,2′:5′2″-terthiophene (2) was successfully electrosynthesised and was then characterised by cyclic voltammetry, UV-Vis spectroscopy, four-point probe conductivity measurement, and scanning electron microscopy. This novel light harvesting conducting copolymer was then incorporated into photoelectrochemical cells using a liquid electrolyte and tested for photovoltaic responses. The effect of zinc incorporation into the porphyrin cavity was also investigated, and the best device generated an open circuit voltage of 185 mV, short circuit current of 881 μA cm−2 with a fill factor of 0.36 and energy conversion efficiency of 0.12% under a halogen white light intensity of 500 W m−2.  相似文献   

9.
G. Dhoot  M. Rubino  H. Soto-Valdez 《Polymer》2009,50(6):1470-978
A time-resolved Fourier Transform Infrared-Attenuated Total Reflectance Spectroscopy (FTIR-ATR) technique was set up and used to study the diffusion of eugenol through Linear Low Density Polyethylene (LLDPE) at 16, 23 and 40 °C. The 1514 cm−1 peak for eugenol (aromatic -CC- stretching) was monitored over time and used to determine the diffusion coefficient (D). The Fickian model was found to fit well to the experimental data and the D value of eugenol through LLDPE was found to be between 1.05 ± 0.01 and 13.23 ± 0.18 × 10−10 cm2/s. The FTIR-ATR results were compared with one and two side diffusion process using a permeation cell and quantified by High Performance Liquid Chromatography (HPLC) technique. Eugenol sorbed in LLDPE samples at different times, was extracted in methanol and the concentration determined by HPLC. The diffusion coefficient by both two-sided and one-sided HPLC technique was found to be approximately three times higher than the FTIR-ATR values although they were in the same order of magnitude of 10−10 cm2/s. The difference between the FTIR-ATR and HPLC results was mainly attributed to difference between the two measuring techniques.  相似文献   

10.
The structure of amphiphilic low-dimensional copolymer electrolytes I of similar overall composition but prepared by different synthetic procedures X and Y are described. I are copolymers of poly[2,5,8,11,14-pentaoxapentadecamethylene(5-alkyloxy-1,3-phenylene)] (CmO5) and poly[2,-oxatrimethylene(5-alkyloxy-1,3-phenylene)] (CmO1) where the alkyl side chains having m carbons are hexadecyl or mixed dodecyl/octadecyl (50/50). 1H NMR shows that the copolymers have 50% (m = 16) or only 18 and 13% of CmO5 units and DSC indicates that the copolymers have ‘block’ sequencing of CmO1 and CmO5 segments. Molecular dynamics modelling indicates that in CmO5 Li+ and BF4 ions are separated by Li+ encapsulation in tetraethoxy segments but in ionophobic CmO1 units the salt is mostly present as neutral aggregates decoupled from the polymer. Conductivities of these microphase-separated mixtures with salt-bridge amphiphilic polyethers II and III of each system are similar. They have low temperature dependence over the range 20 °C to 110 °C at ∼10−3 S cm−1. 7Li NMR linewidth measurements confirm high lithium mobilities at −20 °C. A conduction mechanism is proposed whereby Li+ hopping takes place along rows of decoupled aggregates (dimers/quadrupoles) within an essentially block copolymer structure. Subambient measurements to −10 °C gave a conductivity of 4 × 10−5 S cm−1.  相似文献   

11.
We have studied the effect of BaCl2 dopant on the optical and microstructural properties of a polymer poly(vinyl alcohol) (PVA). Pure and BaCl2 doped PVA films were prepared using solvent casting method. These films were characterized using FTIR, UV-visible, XRD and DSC techniques. The observed peaks around 3425 cm−1, at 1733 cm−1 and 1640 cm−1 in the FTIR spectra were assigned to O-H, CC stretching and acetyle CO group vibrations, respectively. In the doped PVA shift in these bands can be understood on the basis of intra/inter molecular hydrogen bonding with the adjacent OH group of PVA. The UV-visible spectra shows the absorption bands around 196 nm and shoulders around 208 nm with different absorption intensities for doped PVA, which are assigned to n→π* transition. This indicates the presence of unsaturated bonds mainly in the tail-head of the polymer. Optical band energy gap is estimated using UV-visible spectra and it decreases with increasing dopant concentration. The powder XRD shows an increase in crystallinity in the doped PVA, which arises due to the interaction of dopant with PVA causing a molecular rearrangement within the amorphous phase of polymer. These modifications also influence the optical property of the doped polymer. The DSC study also supports increasing crystalline thickness and degree of crystallinity due to doping.  相似文献   

12.
The metal complex formation and the electrical properties of amorphous solid polymer electrolytes, based on poly(butadiene-acrylonitrile) copolymer (PBAN) and CoCl2, have been studied over the homogeneity region of the system limited by the CoCl2 concentration of 1.89 mol kg−1. It has been found that ionic conductivity is carried out by the unipolar anion transfer at lower CoCl2 concentrations (up to 0.10 mol kg−1). As the CoCl2 concentration increases, electronic conductivity appears in addition to ionic conductivity, and the former becomes dominant, starting from 0.38 mol kg−1. It has been shown that the nature of charge carriers is determined by the composition of metal complexes formed by CoCl2 and the macromolecular solvent PBAN. At lower concentrations, the [Co2L2Cl4]0 dimers are the predominant species (L being macromolecule side groups CN), and their dissociation is followed by the formation of mobile Cl anions and immobile binuclear [Co2Cl3]+ complexes. As CoCl2 concentration increases, polynuclear [ConL2Cl2n]0 (n > 2) complexes appear (L being CN and CC groups of PBAN). Specific features of chemical bonds in π-complexes of transition metals result in the appearance of electronic charge carriers. The abrupt increase in conductivity observed at the highest CoCl2 concentration is connected with the formation of a percolation network of polynuclear [ConL2Cl2n]0 complexes.  相似文献   

13.
The electroactive copolymer of diphenylamine (DPA) and 4,4′-diaminodiphenyl sulfone (DADPS) was synthesized electrochemically in 4 M H2SO4 and ethanol medium. Both electrochemical synthesis and characterization of the copolymer deposited on a glassy carbon electrode (GCE) were carried out using cyclic voltammetry. The voltammograms exhibited different patterns of behavior with different feed concentrations of DPA. Equimolar concentrations of DPA and DADPS demonstrated very efficient growth of the copolymer film on the surface of the GCE. The copolymer exhibited high solubility in dimethyl sulfoxide (DMSO). The scan rate exerted little-effect on this GCE copolymer film, revealing the film's excellent electroactive adherent properties. The effect of pH on the copolymer film showed that the polymer was electrochemically active up to pH 7.0. Spectroelectrochemical analysis of the copolymer film, carried out on an indium tin oxide (ITO) plate, showed multicolor electrochromic behavior when the applied potential was changed. The copolymer was characterized by FTIR and 1H NMR spectral data. The surface morphology was studied using SEM analysis, the grain size of the copolymer was measured using XRD studies and was found to be 56 nm. The electrical conductivity of the copolymer was 2.65 × 10−2 S cm−1, as determined using a four-probe conductivity meter.  相似文献   

14.
R. Sasikumar 《Polymer》2011,52(17):3710-3716
Electroactive conducting copolymers of aniline (ANI) and ethyl 4-aminobenzoate (EAB) were prepared electrochemically. Cyclic voltammetric studies were carried out with different feed concentration of EAB on glassy carbon electrode surface. The voltammograms exhibited different behavior for different concentrations of EAB. The copolymers exhibited high solubility in many polar solvents. The scan rate exerted good influence on the polymer effect on this GCE copolymer film, revealing electroactive film’s excellent adherent properties. The effect of pH on the copolymer film showed that the polymer was electrochemically active up to pH 7.0. Spectroelectrochemical analysis of the copolymer film, carried out on an indium tin oxide (ITO) plate, showed multicolor electrochromic behavior when the applied potential was changed. The color of the copolymer was changed from neutral yellow (422 nm) to green (760 nm) and to blue (600 nm) at the concentration of 0.1 M aniline and 0.1 M EAB in 0.1 M H2SO4 medium. The copolymer was characterized by FT-IR spectral data. The surface morphology were studied using SEM and TEM analysis. The grain size of the copolymer was measured using XRD studies and was found to be 80 nm. The electrical conductivity of the copolymer was 3.21 × 10−2 S cm−1, as determined using a four-probe conductivity meter.  相似文献   

15.
Gel-type polymer electrolytes based on the copolymer poly(ethylene oxide-co-epichlorohydrin) and the plasticizer γ-butyrolactone (GBL) were optimized and applied in dye-sensitized solar cells. The plasticizer added to the electrolyte allowed the dissolution of a higher concentration of salt, reaching conductivity values close to 1 mS cm−1 for the sample prepared with 30 wt% of LiI. Raman spectroscopy confirmed polyiodide formation in the electrolyte when the salt concentration exceeds 7.5 wt%, introducing a significant contribution of electronic conductivity in the electrolyte. The devices were characterized under AM 1.5 conditions and the I-V curves were fitted using a two diode equation. Increasing the concentration of LiI-I2 accelerates dye cation regeneration as measured by transient absorption spectroscopy; however, it also contributes to an increase in the dark current of the cell by one order of magnitude. The best performance was achieved for the solar cell prepared with the electrolyte containing 20 wt% of LiI, with efficiencies of 3.26% and 3.49% at 100 and 10 mW cm−2 of irradiation, respectively.  相似文献   

16.
In this study, a triblock copolymer, poly(styrene-isobutylene-styrene), was sulfonated to eight different levels ranging from 0.36 to 2.04 mequiv./g (13 to 82 mol% of styrene; styrene is 19 mol% of the unsulfonated block copolymer). These sulfonated polymers were characterized with elemental analysis and infrared spectroscopy to confirm sulfonation and determine accurate sulfonation levels. Infrared analysis revealed four additional stretching vibrations as a result of sulfonation. Also, a linear relationship between absorbance at 1006 cm−1 (stretching of the aromatic ring in styrene caused by the para-substituted sulfonic acid) and sulfonation level (measured by elemental analysis) was found. The density and water solubility of all the sulfonated polymers were measured and increased with increasing sulfonation level, as high as 1.31 g/cm3 and 351 wt%, respectively. In addition, a sulfonated triblock copolymer at 79 mol% sulfonation was neutralized with a cesium cation and revealed an increase in density, but a reduction in water solubility. This study demonstrates the resulting unique properties of sulfonated styrene-based block copolymers at higher ion-exchange capacities than previously reported.  相似文献   

17.
A novel polyblend electrolyte consisting of KI and I2 dissolved in a blending polymer of polyvinyl pyrrolidone (PVP) and polyethylene glycol (PEG) was prepared. The formation of I3 in the polymer electrolyte was confirmed by X-ray photoelectron spectroscopy (XPS) characterization. Due to the coordinating and plasticizing effect by PVP, the ionic conductivity of the polyblend electrolyte is enhanced. The highest ionic conductivity of 1.85 mS cm−1 for the polyblend electrolyte was achieved by optimizing the compositions as 40 wt.% PVP + 60 wt.% PEG + 0.05 mmol g−1 I2 + 0.10 mmol g−1 KI. Based on the polyblend electrolyte, a DSSC with fill factor of 0.59, short-circuit density of 9.77 mA cm−2, open-circuit voltage of 698 mV and light-to-electricity conversion efficiency of 4.01% was obtained under AM 1.5 irradiation (100 mW cm−2).  相似文献   

18.
Capacity intermittent titration technique (CITT) was used to investigate the chemical diffusion coefficient () of lithium-ion in LiFePO4 cathode material. The values of at the galvano-charge current of 0.2 and 0.4 mA were respectively found to range from 8.8 × 10−16 to 8.9 × 10−14 cm2 s−1 and from 1.2 × 10−16 to 8.5 × 10−14 cm2 s−1 in the voltage range from 3.2 to 4 V (vs. Li+/Li). The transfer coefficients of cathode (0.32-0.42) and anodic (0.26-0.3), and the standard rate constant (1.58 × 10−9 to 1.30 × 10−8 cm s−1) were measured from the Tafel plots of LiFePO4 in the equilibrium potential range from 3.06 to 3.45 V. From these kinetic parameters, the finite kinetics at interface was taken into account to revise the above values of . The revised values of at the galvano-charge current of 0.2 and 0.4 mA were respectively found to range from 2.44 × 10−15 to 2.21 × 10−13 cm2 s−1 and from 5.81 × 10−16 to 3.22 × 10−13 cm2 s−1 in the voltage range from 3.2 to 4 V. Results show that the approximation of infinite charge-transfer kinetics leads to a spurious value of which is lower than the revised value, and the spurious extent depends on the galvano-charge current of CITT experiment.  相似文献   

19.
Pure and Zn2+ and/or F doped hydroxyapatite (HA) were synthesized by the precipitation method and detection of ion incorporations into the HA structure was investigated by a non invasive Fourier transform infrared (FTIR) spectroscopic technique. The synthesized materials were sintered at 1100 °C for 1 h. The Zn2+ addition amount was kept constant at 2 mol% whereas F amount was changed. The weight fractions of the HA and CaO were calculated by Rietveld analysis by using GSAS. Co-doping of Zn2+ and F ions increased the stability of HA. A detailed analysis of FTIR spectroscopy was performed to observe whether HA structure was formed or not. The bands corresponding to the (PO43−) functional group and (OH) functional group were observed. Moreover, the ion incorporation into the HA structure and the amount of the ions were analyzed by FTIR spectroscopy. The OH…F bands were observed at 711 cm−1 and 3543 cm−1. The Zn–O stretching band was observed at 3403 cm−1 and 433 cm−1. The area calculation under the OH…F bands and (OH) stretching and librational modes of the bands revealed that as the F amount increased, the area under the bands at 711 cm−1 and 3543 cm−1 increased whereas the area under the (OH) stretching and librational modes of the bands decreased due to the fact that F ion replaced with (OH) ion in HA structure. All these results showed that Zn2+ and F ions were successfully incorporated into the HA structure. Moreover, the amount of F ions in the HA structure was successfully confirmed by determination of the area under the F and (OH) related bands.  相似文献   

20.
In this study, we prepare a kind of solid polymer electrolyte (SPE) based on N-ethyl-N′-methyl imidazolium tetrafluoroborate (EMIBF4), LiBF4 and poly(vinylidene difluoride-co-hexafluoropropylene) [P(VdF-HFP)] copolymer. The resultant SPE displays high thermal stability above 300 °C and high room temperature ionic conductivity near to 10−3 S cm−1. Its electrochemical properties are improved with incorporation of a zwitterionic salt 1-(1-methyl-3-imidazolium)propane-3-sulfonate (MIm3S). When the SPE contains 1.0 wt% of the MIm3S, it has a high ionic conductivity of 1.57 × 10−3 S cm−1 at room temperature, the maximum lithium ions transference number of 0.36 and the minimum apparent activation energy for ions transportation of 30.9 kJ mol−1. The charge-discharge performance of a Li4Ti5O12/SPE/LiCoO2 cell indicates the potential application of the as-prepared SPE in lithium ion batteries.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号