The effective T-stress estimation and crack paths emanating from U-notches

The concept of the T-stress as a local constraint factor has been extended to U-notch tip stress distribution as the effective T-stress. The effective T-stress has been estimated as the average value of the T-stress in the region corresponding to the effective (characteristic) distance ahead of the notch tip. The T-stress is evaluated by finite element method using the experimental load for crack initiation and computing the difference between principal stresses along ligament. A large range of critical effective T-stress values is investigated for different specimen configurations and notch aspect ratios. Crack stabilisation and crack bifurcation for fracture emanating from notches according to the critical effective T-stress is discussed. A model involving the influence of the critical effective T-stress on void growth for ductile failure in the vicinity of the notch tip has been proposed.     

The T-stress solutions for through-wall circumferential cracks in cylinders subjected to general loading conditions

The elastic T-stress is a parameter used to define the level of constraint at a crack tip. It is important to provide T-stress solutions for practical geometries to apply the constraint-based fracture mechanics methodology. In the present work, T-stress solutions are provided for circumferential through-wall cracks in thin-walled cylinders. First, cylinders with a circumferential through-wall crack were analyzed using the finite element method. Three cylinder geometries were considered; defined by the mean radius of the cylinder (R) to wall thickness (t) ratios: R/t = 5, 10, and 20. The T-stress was obtained at eight crack lengths (θ/π = 0.0625, 0.1250, 0.1875, 0.2500, 0.3125, 0.3750, 0.4375, and 0.5000, θ is the crack half angle). Both crack face loading and remote loading conditions were considered including constant, linear, parabolic and cubic crack face pressures and remote tension and bending. The results for constant and linear crack face pressure were used to derive weight functions for T-stress for the corresponding cracked geometries. The weight functions were validated against several linear and non-linear stress distributions. The derived weight functions are suitable for T-stress calculations for circumferential cracks in cylinders under complex stress fields.     

Elastic T-stress solutions for semi-elliptical surface cracks in finite thickness plates

Three-dimensional finite element analyses have been conducted to calculate the elastic T-stress for semi-elliptical surface cracks in finite thickness plates. Far-field tension and bending loads were considered. The analysis procedures and results were verified using both exact solutions and approximate solutions. The T-stress solutions are presented along the crack front for cracks with a/t values of 0.2, 0.4, 0.6 or 0.8 and a/c values of 0.2, 0.4, 0.6 or 1.0. Based on the present finite element calculations for T-stress, empirical equations for the T-stress at three locations: the deepest, the surface and the middle points of the crack front under tension or bending are presented. The numerical results are approximated by empirical formulae fitted with an accuracy of 1% or better. They are valid for 0.2?a/c?1 and 0?a/t?0.8. These T-stress results together with the corresponding K or J values for surface cracks are suitable for the analysis of constraint effects for surface cracked components.     

Elastic T-stress solutions for flat elliptical cracks under tension and bending

Exact solutions for elastic T-stress of a flat elliptical crack in an infinite body under tension and bending are obtained in this paper. Many papers have been devoted to the problems for elliptical cracks in an elastic medium, but all their attention has been concentrated on the determination of stress intensity factors. In the current paper, elastic T-stress solutions are derived by means of the potential method and a specific collection of harmonic functions. The formulas of the elastic T-stress for a penny-shaped crack [Wang X. Elastic T-stress solutions for penny-shaped cracks under tension and bending. Engng Fract Mech 2004;71:2283-98] follow from the present results as a special case. It is obtained that under tension loading, the elastic T-stress is always compressive along the elliptical crack front. In both tension and bending cases, T-stress essentially depends on the Poisson’s ratio of the material, a parametric angle and semi-axes of the ellipse.     

Stress intensity factor K and the elastic T-stress for corner cracks

The stress intensity factor K and the elastic T-stress for corner cracks have been determined using domain integral and interaction integral techniques. Both quarter-circular and tunnelled corner cracks have been considered. The results show that the stress intensity factor K maintains a minimum value at the mid-plane where the T-stress reaches its maximum, though negative, value in all cases. For quarter-circular corner cracks, the K solution agrees very well with Pickard's (1986) solution. Rapid loss of crack-front constraint near the free surfaces seems to be more evident as the crack grows deeper, although variation of the T-stress at the mid-plane remains small. Both K and T solutions are very sensitive to the crack front shape and crack tunnelling can substantially modify the K and T solutions. Values of the stress intensity factor K are raised along the crack front due to crack tunnelling, particularly for deep cracks. On the other hand, the difference in the T-stress near the free surfaces and at the mid-plane increases significantly with the increase of crack tunnelling. These results seem to be able to explain the well-observed experimental phenomena, such as the discrepancies of fatigue crack growth rate between CN (corner notch) and CT (compact tension) test pieces, and crack tunnelling in CN specimens under predominantly sustained load.     

T-Stress solutions for a semi-elliptical axial surface crack in a cylinder subjected to mode-I non-uniform stress distributions

This paper presents the T-stress solutions (T₁₁ and T₃₃) for semi-elliptical axial surface cracks in a cylinder subjected to mode-I non-uniform stress on the crack surface. Two cylindrical geometries with inner radius (R_i) to wall thickness (t) ratios R_i/t = 5 and 10 were considered. The T-stresses were applied along the crack front for normalized crack depth values a/t of 0.2, 0.4 and 0.5 and aspect ratios a/c of 0.2, 0.4, 0.6 and 1.0. Three stress distribution; uniform, linear and parabolic were applied to the crack face. In addition to these solutions, concrete formulation of the superposition principle is given for the T₃₃-stress, which is known as an elastic parameter that describes the out-of-plane crack tip constraint effect. Then, the validity of the formulation was shown through application of our T-stress solutions to the problem of an axial semi-elliptical surface crack in a cylinder subjected to internal pressure, and checking that the principle of superposition holds for the problem.     

Elastic T-stress for cracks in test specimens subjected to non-uniform stress distributions

Finite element analyses have been conducted to calculate elastic T-stress solutions for cracked test specimens. The T-stress solutions are presented for single edge cracked plates, double edge crack plates and centre cracked plates. Uniform, linear, parabolic or cubic stress distributions were applied to the crack face. The results for uniform and linear stress distributions were used to derive weight functions for T-stress for the corresponding specimens. The weight functions for T-stress are then verified against several linear and non-linear stress distributions. The derived weight functions are suitable for the T-stress calculation for cracked specimens under any given stress field.     

Universal features of elastic notch-tip stress fields

The results of linear elastic analyses of stress distributions near a wide variety of notches are presented. Notches under tension, tension and bending, and pure bending have been considered. It is demonstrated that notch-tip stress fields are similar to each other regardless of the notch geometry and the loading system. Universal functions describing the stress field in the notch-tip neighbourhood have been derived and tested againts available analytical, numerical and experimental data. The universal expressions can be used to calculate stresses in the region x⩽ 3ρ from the notch tip. These expressions can be particularly useful when using the weight function method to calculate stress intensity factors for cracks emanating from notches.     

Surface flaws behavior under tension,bending and biaxial cyclic loading

Fatigue surface crack growth and in-plane and out-of-plane constraint effects are studied through experiments and computations for the aluminum alloy D16T. A tension/bending central notched plate and cruciform specimens under different biaxial loadings with external semi-elliptical surface cracks are studied. The variation of the fatigue crack growth rate and surface crack paths is studied under cyclic tension, bending and biaxial tension–compression loading. For the experimental surface crack paths in the tested specimens, the T-stress, out-of-plane T_z factor, local triaxiality parameter h and the governing parameter for the 3D-fields of the stresses and strains at the crack tip in the form of the I_n-integral are calculated as a function of the aspect ratio by finite element analysis to characterize the constraint effects along the semi-elliptical crack front. The plastic stress intensity factor approach is applied to the fatigue crack growth on the free surface, as well as at the deepest point of the semi-elliptical surface crack front, of the tested tension/bending plate and cruciform specimens. From the results, characteristics of the fatigue surface crack growth rate as a function of the loading conditions are established.     

T-stress of cracks loaded by near-tip tractions

T-stress solutions were derived for tractions acting on the crack-faces near a crack tip. Such solutions are of interest for the determination of the leading term of a weight function representation of T-stresses and the computation of an “intrinsic” T-stress for cracks growing in a material with a rising crack growth resistance. First, the type of the Green’s function for T-stresses is theoretically established. Then, results of finite element computations are reported for edge-cracked bars, DCB and CT specimens, which are suited for the determination of the first series term. As an application of the Green’s functions, the T-stresses caused by bridging interactions very close to the crack tip are computed.     

On the full set of elastic T-stress terms of internal elliptical cracks under mixed-mode loading condition

Analytical expressions for the elastic constant stress terms of the asymptotic field, the so called T-stresses, for internal mixed-mode elliptical cracks in infinite homogeneous and isotropic elastic solids are addressed. To solve the problem the mixed-mode crack problem is divided into sub-problems using the superposition method, and each sub-problem is then solved for the asymptotic stress field. Considering the expansion of the local stress field at the crack front, the elastic T-stress terms are derived for each sub-problem. The results are superimposed to give the analytical expressions of the so far missing elastic T-stresses for mixed-mode elliptical cracks.The effect of the T-stresses on the size and shape of the plastic zone at the crack tip is discussed, and analytical results are compared to the ones from finite element analyses, both for the T-stress components and the size of the plastic zone. For an accurate prediction of the plastic zone all singular and constant terms (T-stresses) in the stress expansion formulae should be considered. It is observed that negative T-stresses increase the size of the plastic zone, while positive ones reduce it.     

Two-parameter characterization of elastic-plastic crack front fields: Surface cracked plates under tensile loading

In this paper the J-Q two-parameter characterization of elastic-plastic crack front fields is examined for surface cracked plates under uniaxial and biaxial tensile loadings. Extensive three-dimensional elastic-plastic finite element analyses were performed for semi-elliptical surface cracks in a finite thickness plate, under remote uniaxial and biaxial tension loading conditions. Surface cracks with aspect ratios a/c = 0.2, 1.0 and relative depths a/t = 0.2, 0.6 were investigated. The loading levels cover from small-scale to large-scale yielding. In topological planes perpendicular to the crack fronts, the crack stress fields were obtained. In order to facilitate the determination of Q-factors, modified boundary layer analyses were also conducted. The J-Q two-parameter approach was then used in characterizing the elastic-plastic crack front stress fields along these 3D crack fronts. Complete distributions of the J-integral and Q-factors for a wide range of loading conditions were obtained. It is found that the J-Q characterization provides good estimate for the constraint loss for crack front stress fields. It is also shown that for medium load levels, reasonable agreements are achieved between the T-stress based Q-factors and the Q-factors obtained from finite element analysis. These results are suitable for elastic-plastic fracture mechanics analysis of surface cracked plates.     

On the full set of elastic T-stress terms of internal circular cracks under mixed-mode loading conditions

Analytical expressions for all non-singular stress terms of the asymptotic crack tip field, the so-called T-stresses of internal mixed mode circular (penny shaped) cracks in infinite homogeneous and isotropic elastic solids are addressed. To solve the problem the mixed mode crack problem is divided into sub-problems using the superposition method, and each sub-problem is then solved for the asymptotic stress field. Considering the expansion of the local stress field at the crack front, the elastic T-stress terms are derived for each sub-problem. The results are superimposed to give the analytical expressions of the so far missing elastic T-stresses of internal mixed mode penny shaped cracks.The effect of the T-stresses on the size and shape of the plastic zone at the crack tip is discussed, and analytical results are compared to the ones from finite element analyses, both for the T-stress components and the size of the plastic zone. For an accurate prediction of the plastic zone all the singular terms and the constant terms (T-stresses) in the stress expansion formulae should be considered. It is observed that negative T-stresses increase the size of the plastic zone, while positive ones reduce it.     

Stress intensity factors for cracks in thin plates

This paper presents stress intensity factor solutions for several crack configurations in plates. The loadings considered include internal pressure, and also combined bending and tension. The dual boundary element method is used to model the plate and mixed mode stress intensity factors are evaluated by a crack surface displacement extrapolation technique and the J-integral technique. Several cases including centre crack, edge crack and cracks emanating from a hole in finite width plates are presented.     

Two-parameter fracture mechanics and circumferential crack growth in surface cracked pipelines using line-spring elements

A procedure for constraint correction of crack growth resistance curves for single edge notched specimens and for pipe geometries is presented. The procedure is based on FE models with the combination of shell- and line-spring finite elements. Crack tip opening displacement and T-stress are employed, and ductile crack growth is accounted for. Experimental crack growth resistance curves are obtained for both single edge notched tension- and bending-specimens for different crack depths to cover significantly different constraint levels. To account for different constraint levels, a method to scale the resistance curve using the T-stress is implemented. The analyses include ductile crack growth in both the circumferential and thickness directions. The effect of circumferential crack growth with biaxial loading is also presented. The results from the line-spring model are compared with detailed 3D-models for verification of the implementation of circumferential crack growth. The importance of including crack growth in circumferential direction is discussed based on numerical parametric studies. A measure to quantify the importance of circumferential crack growth is proposed.     

Evaluation of the elastic T-stress in surface-cracked plates using the line-spring method

The elastic T-stress has been found to be an important parameter in characterizing the very near tip elastic-plastic stress state under 2-D plane strain conditions (Larsson and Carlsson [1]; Bilby et al. [2]; Betegón and Hancock [3]; etc.). Several computational methods have been developed to evaluate the T-stress (Larsson and Carlsson [1]; Kfouri [4]; Sham [5]). However, none of these methods can be readily adapted to calculate the elastic T-stress in a surface-cracked plate (SCP), which is essentially 3-D in nature. In this paper, the line-spring method, which has proven effective in computing the stress intensity factor of SCPs, is used to evaluate the elastic T-stress along the crack front. SCPs with same length and width, but different crack geometries, from low aspect ratio (a/c=0.24) to high aspect ratio (a/c=0.70), under both remote tension and bending, are studied using the line-spring method. Detailed, three-dimensional continuum finite element (FE) solutions of some extreme cases, in terms of both aspect ratio and crack depth, under either remote tension or bending, are compared with the line-spring solutions. The line-spring solutions are in excellent agreement with the 3-D elastic FE solutions, but use 2 to 3 orders of magnitude less computational time and considerably less preparation and post-processing efforts. A concluding example demonstrates the utility of the T-stress in more accurately describing the crack front elastic-plastic field in a SCP at load levels up to moderate scale yielding.     

Two parameter fracture mechanics: Fatigue crack behavior under mixed mode conditions

The fatigue crack path has been studied on a tensile specimen with holes. The experimental crack path trajectories were compared with those calculated numerically. To incorporate the influence of constraint on the crack curving, we predicted the fatigue crack path by using the two-parameter modification of the maximum tensile stress (MTS) criterion. The values of the mixed-mode stress intensity factors K_I, and K_II as well as the corresponding constraint level characterized by T-stress were calculated for the obtained curvilinear and reference crack path trajectories. It is shown that in the studied configuration the effect of T-stress on the crack path is not significant. On the other hand the effect of constraint on the fatigue crack propagation rate is more pronounced.     

Perturbation method for the solution of a Zener–Stroh crack with a slightly curved configuration

This paper investigates the Zener–Stroh crack with curved configuration in plane elasticity. A singular integral equation is suggested to solve the problem. Formulae for evaluating the SIFs and T-stress at the crack tip are suggested. If the curve configuration is a product of a small parameter and a quadratic function, a perturbation method based on the singular integral equation is suggested. In the method, the singular integral equation can be expanded into a series with respect to the small parameter. Therefore, many singular integral equations can be separated from the same power order for the small parameter. These singular integral equations can be solved successively. The solution of the successive singular integral equations will provide results for stress intensity factors and T-stress at the crack tip. It is found that the behaviors for the solution of SIFs and T-stress in the Zener–Stroh crack and the Griffith crack are quite different. This can be seen from the presented comparison results.     

Material constraint parameters for the assessment of shallow defects in structural components. Part II: Constraint-based assessment of shallow defects

This Part II paper describes a series of constraint-based R6 assessments of shallow-cracked specimens under equibiaxial loading using material constraint parameters obtained from lookup tables presented in the companion Part I paper. Parameters are derived for an A533B-1 steel forging from a knowledge of the yield and flow behaviour of the material and a calibration of the Beremin model parameter m. Resulting assessments, which use both T- and Q-stress to quantify constraint, are found to be conservative with respect to the available experimental data. The results are also used to predict the influence of T-stress on the Master Curve reference temperature. Available data are broadly in agreement with the predicted trend curve. Finally, the results demonstrate that out-of-plane biaxial loading increases constraint to the extent that the inherent conservatism of the elastic T-stress at high L_r is eroded. Out-of-plane constraint effects are only properly accounted for by the hydrostatic Q-stress and for this reason, the use of T to assess biaxial loading situations should be undertaken with a degree of caution.