Li-decorated double vacancy graphene for hydrogen storage application: A first principles study

Lithium decoration is an effective strategy for improving the hydrogen adsorption binding energy and the storage capacity in carbon nanostructures. Here, it is shown that Li-decorated double carbon vacancy graphene (DVG) can be used as an efficient hydrogen storage medium by means of Density Functional Theory (DFT) based calculations. The Li binding energy in DVG is 4.04 eV, which is much higher than that of pristine graphene. A maximum of four hydrogen molecules adsorb on Li decorated on one side of DVG and this leads to a gravimetric storage capacity of 3.89 wt% with an average adsorption binding energy of 0.23 eV/H₂. When Li is decorated on both sides of DVG, the gravimetric storage capacity reaches 7.26 wt% with a binding energy of 0.26 eV/H₂ which shows that desorption would take place at ambient conditions.     

Stabilized Li-decoration and enhanced hydrogen storage on reduced graphene oxides

Hydrogen storage properties of Li-decorated graphene oxides containing epoxy and hydroxyl groups are studied by using density functional theory. The Li atoms form Li₄O/Li₃OH clusters and are anchored strongly on the graphene surface with binding energies of −3.20 and −2.84 eV. The clusters transfer electrons to the graphene substrate, and the Li atoms exist as Li⁺ cations with strong adsorption ability for H₂ molecules. Each Li atom can adsorb at least 2H₂ molecules with adsorption energies greater than −0.20 eV/H₂. The hydrogen storage properties of Li-decorated graphene at different oxidation degrees are studied. The computations show that the adsorption energy of H₂ is −0.22 eV/H₂ and the hydrogen storage capacity is 6.04 wt% at the oxidation ratio O/C = 1/16. When the O/C ratio is 1:8, the storage capacity reaches 10.26 wt% and the adsorption energy is −0.15 eV/H₂. These results suggest that reversible hydrogen storage with high recycling capacities at ambient temperature can be realized through light-metal decoration on reduced graphene oxides.     

Hydrogen storage capacity and reversibility of Li-decorated B4CN3 monolayer revealed by first-principles calculations

This work explored the feasibility of Li decoration on the B₄CN₃ monolayer for hydrogen (H₂) storage performance using first-principles calculations. The results of density functional theory (DFT) calculations showed that each Li atom decorated on the B₄CN₃ monolayer can physically adsorb four H₂ molecules with an average adsorption energy of ?0.23 eV/H₂, and the corresponding theoretical gravimetric density could reach as high as 12.7 wt%. Moreover, the H₂ desorption behaviors of Li-decorated B₄CN₃ monolayer at temperatures of 100, 200, 300 and 400 K were simulated via molecular dynamics (MD) methods. The results showed that the structure was stable within the prescribed temperature range, and a large amount of H₂ could be released at 300 K, indicative of the reversibility of hydrogen storage. The above findings demonstrate that the Li-decorated B₄CN₃ monolayer can serve as a favorable candidate material for high-capacity reversible hydrogen storage application.     

A density functional theory and grand canonical Monte Carlo simulations study the hydrogen storage on the Li-decorated net-τ

To find ideal hydrogen storage media, hydrogen storage performance of Li decorated net-τ has been investigated by first-principles calculations. Maximum 6 Li atoms are adsorbed on net-τ, with the average binding energy of 2.15 eV for per Li atom. Based on 6Li-decorated net-τ, up to twenty H₂ molecules are adsorbed, with a high H₂ storage capacity of 12.52 wt% and an appropriate adsorption energy of 0.21 eV/H₂. Finally, H₂ uptake performance is measured by GCMC simulations. Our results suggest that Li-decorated net-τ may be a promising hydrogen storage medium under realistic conditions.     

Li-decorated graphyne as high-capacity hydrogen storage media: First-principles plane wave calculations

Taking into account the van der Waals correction, the characteristics of the Li-decorated graphyne as the hydrogen storage medium have been explored using first-principles plane wave calculations. We find that Li atom can be adsorbed not only over the center of large hexagon (H_L site) but also over the center of small hexagon (H_S site). For double-side Li decorations, there are 14H₂ molecules can be adsorbed on Li-decorated graphyne primitive cell with the adsorption energy of 0.19 eV/H₂. As a result, the hydrogen storage capacity of 13.0 wt% can be obtained. This suggests that the Li-decorated graphyne system can serve as a high-capacity hydrogen storage medium.     

Hydrogen adsorption and storage behaviors of Li-decorated PdS2 monolayer: An extended tight-binding study based on DFT

The hydrogen adsorption and storage of the lithium-decorated PdS₂ monolayer at nano-size has been investigated by using extended tight-binding (GFN1-xTB) based on density functional theory (DFT). The calculation results demonstrate that the average adsorption energies of 1–5H₂ change in 0.47–0.20 eV/H₂ range which decreases with increasing of adsorbed hydrogen molecule number. The gravimetric density for hydrogen storage adsorption with 12Li atom and 60H₂ molecules of Li-decorated PdS₂ monolayer is about 6.98 wt% considered as possible application in hydrogen storage. The examination of the hydrogen store mechanism between the monolayer and hydrogen molecules is presented by polarization between Pd and H₂, which can be effect on the adsorption behavior.     

Hydrogen storage in lithium-decorated benzene complexes

Based on first-principles calculations, we find Li-decorated benzene complexes are promising materials for high-capacity hydrogen storage. Lithium atoms in the complexes are always positively charged, and each one can bind at most four H₂ molecules by a polarization mechanism. Therefore, a hydrogen uptake of 8.6 wt% and 14.8 wt% can be achieved in isolated C₆H₆–Li and Li–C₆H₆–Li complexes, respectively. The binding energy in the two cases is 0.22 eV/H₂ and 0.29 eV/H₂, respectively, suitable for reversible hydrogen storage. Various dimers may form, but the hydrogen storage capacity remains high or uninfluenced. This study provides not only a promising hydrogen storage medium but also comprehensions to other hydrogen storage materials containing six-carbon rings.     

An investigation of Li-decorated N-doped penta-graphene for hydrogen storage

By making use of first principles calculations, lithium-decorated (Li-decorated) and nitrogen-doped (N-doped) penta-graphene (PG) was investigated as a potential material for hydrogen storage. The geometric and electronic structures of two types of N-doped PG were studied, and the band gaps were 1.86 eV and 2.06 eV, respectively, depending on the positions of the substitution. The probable adsorption sites for Li atoms on topside and downside were calculated. Hydrogen molecules were added one by one to Li-decorated N-doped PG to research the maximum hydrogen gravimetric density. It is found that up to 5 hydrogen molecules on topside and 8 hydrogen molecules on downside can be adsorbed around a Li atom, and the average adsorption energies are in the range of physical adsorption processes (0.1–0.4 eV). The gravimetric densities can reach 7.88 wt% for N-doped PG with Li decoration. Our results suggest that Li-decorated N-doped PG is a significantly promising material for hydrogen storage.     

High-capacity hydrogen storage in Li-decorated (AlN)n (n = 12, 24, 36) nanocages

The capability of Li-decorated (AlN)_n (n = 12, 24, 36) nanocages for hydrogen storage has been studied by using density functional theory (DFT) with the generalized gradient approximation (GGA). It is found that each Al atom is capable of binding one H₂ molecule up to a gravimetric density of hydrogen storage of 4.7 wt% with an average binding energy of 0.189, 0.154, and 0.144 eV/H₂ in the pristine (AlN)_n (n = 12, 24, 36) nanocages, respectively. Further, we find that Li atoms can be preferentially decorated on the top of N atoms in (AlN)_n (n = 12, 24, 36) nanocages without clustering, and up to two H₂ molecules can bind to each Li atom with an average binding energy of 0.145, 0.154, 0.102 eV/H₂ in the Li_n(AlN)_n (n = 12, 24, 36) nanocages, respectively. Both the polarization of the H₂ molecules and the hybridization of the Li-2p orbitals with the H-s orbitals contribute to the H₂ adsorption on the Li atoms. Thus, the Li-decorated (AlN)_n (n = 12, 24, 36) nanocages can store hydrogen up to 7.7 wt%, approaching the U.S. Department of Energy (DOE) target of 9 wt% by the year 2015, and the average binding energies of H₂ molecules lying in the range of 0.1–0.2 eV/H₂ are favorable for the reversible hydrogen adsorption/desorption at ambient conditions. It is also pointed out that when allowed to interact with each other, the agglomeration of Li-decorated (AlN)_n nanocages would lower the hydrogen storage capacity.     

Li-decorated B2O as potential candidates for hydrogen storage: A DFT simulations study

Two-dimensional (2D) B₂O monolayer is considered as a potential hydrogen storage material owing to its lower mass density and high surface-to-volume ratio. The binding between H₂ molecules and B₂O monolayer proceeds through physisorption and the interaction is very weak, it is important to improve it through appropriate materials design. In this work, based on density functional theory (DFT) calculations, we have investigated the hydrogen storage properties of Lithium (Li) functionalized B₂O monolayer. The B₂O monolayer decorated by Li atoms can effectively improve the hydrogen storage capacity. It is found that each Li atom on B₂O monolayer can adsorb up to four H₂ molecules with a desirable average adsorption energy (E_ave) of 0.18 eV/H₂. In the case of fully loaded, forming B₃₂O₁₆Li₉H₇₂ compound, the hydrogen storage density is up to 9.8 wt%. Additionally, ab initio molecular dynamics (AIMD) calculations results show that Li-decorated B₂O monolayer has good reversible adsorption performance for H₂ molecules. Furthermore, the Bader charge and density of states (DOS) analysis demonstrate H₂ molecules are physically absorbed on the Li atoms via the electrostatic interactions. This study suggests that Li-decorated B₂O monolayer can be a promising hydrogen storage material.     

A DFT study of H2 adsorption on lithium decorated 3D hybrid Boron-Nitride-Carbon frameworks

Based on density functional theory (DFT) and first-principles molecular dynamics (MD),a new 3D hybrid Boron-Nitride-Carbon–interconnected frameworks (BNCIFs) consisting of organic linkers with Li decoration is created and optimized. Firstly, Li adsorption behaviors on several BNC_xcomplexes are investigated and compared systematically. The results indicate C substitution of N atom in pure BN layer could improve the metal binding energy effectively. Secondly, the BNC layer (BNC_NN) is chosen to model the frameworks of BNCIFs. The average binding energy of adsorbed Li atoms on BNCIFs is 3.6 eV which is much higher than the cohesive energy of bulk Li and avoids the Li clustering problem. Finally, we study the H₂ adsorptions on the Li decorated BNCIFs by DFT. Every Li atom could adsorb four H₂ molecules with an average binding energy of 0.24 eV. The corresponding gravimetric and volumetric storage capacities are 14.09 wt% and 126.2 g/L respectively overpassing the published 2020 DOE target. The excellent thermal stability of 160H₂@40Li@BNCIFs is also proved by MD. This nanostructure could be served as a promising hydrogen storage medium at ambient conditions.     

First-principles study of superior hydrogen storage performance of Li-decorated Be2N6 monolayer

The potential application of pristine Be₂N₆ monolayer and Li-decorated Be₂N₆ monolayer for hydrogen storage is researched by using periodic DFT calculations. Based on the obtained results, the Be₂N₆ monolayer gets adsorb up to seven H₂ molecules with an average binding energy of 0.099 eV/H₂ which is close to the threshold energy of 0.1 eV required for practical applications. Decoration of the Be₂N₆ monolayer with lithium atom significantly improves the hydrogen storage ability of the desired monolayer compared to that of the pristine Be₂N₆ monolayer. This can be attributed to the polarization of H₂ molecules induced by the charge transfer from Li atoms to the Be₂N₆ monolayer. Decoration of Be₂N₆ monolayer with two lithium atoms gives a promising medium that can hold up to eight H₂ molecules with average adsorption energy of 0.198 eV/H₂ and hydrogen uptake capacities of 12.12 wt%. The obtained hydrogen uptake capacity of 2Li/Be₂N₆ monolayer is much higher than the target set by the U.S. Department of Energy (5.5 wt% by 2020). Based on the van't Hoff equation, it is inferred that hydrogen desorption can occur at T_D = 254 K for 2Li/Be₂N₆ (8H₂) system which is close to ambient conditions. This is a remarkable result indicating important practical applications of 2Li/Be₂N₆ medium for hydrogen storage purposes.     

A reversible hydrogen storage material of Li-decorated two-dimensional (2D) C4N monolayer: First principles calculations

Two-dimensional (2D) materials can be regarded as potential hydrogen storage candidates because of their splendid chemical stability and high specific surface area. Recently, a new dumbbell-like carbon nitride (C₄N) monolayer with orbital hybridization of sp³ is reported. Motivated from the above exploration, the hydrogen adsorption properties of Li-decorated C₄N monolayer are comprehensively investigated via first principles calculations based on the density functional theory (DFT). It is found that the Dirac points and Dirac cones exists in the Brillouin zone (BZ) from the calculated electronic structure and indicates the C₄N can be used as an excellent topological material. Also, the calculated phonon spectra demonstrate that the C₄N monolayer owns a strong stability. Moreover, the calculated binding energy of decorated Li atom is bigger than its cohesive energy and results in Li atoms disperse over the surface of C₄N monolayer uniformly without clustering. In addition, the Li₈C₄N complex can capture up to 24H₂ molecules with an optimal hydrogen adsorption energy of −0.281 eV/H₂ and achieves the hydrogen storage density of 8.0 wt%. The ab initio molecular dynamics (AIMD) simulations suggest that the H₂ molecules can be desorbed quickly at 300 K. This study reveals that Li-decorated C₄N monolayer can be served as a promising hydrogen storage material.     

Hydrogen trapping efficiency of Li decorated porous boron fullerene B38: The first-principles study

The demand for clean renewable energy is urgent in current. The hydrogen application is difficult mainly due to the ratively low capacity in the storage medium. In this work, the adsorption and desorption of the hydrogen molecules by the Li atoms decorated B₃₈ cage are studied by the density functional theory. The calculated largest binding energy of one Li atom (2.68 eV and 2.58 eV) is upon the hexagonal hole of the B₃₈ cage, which is much larger than the experimental cohesive energy of bulk Li (1.63 eV). Each Li atom in the outside of the B₃₈ cage can adsorb up to four H₂ molecules. The E_ad of B₃₈(Li-nH₂)₄ decreases from the 0.22 eV for n = 1 to the 0.11 eV for n = 4. The B₃₈(Li–4H₂)₄ structure achieves the 6.85 wt% hydrogen gravimetric density, which is higher than the goal of 5.5 wt% before 2017 set by the United States Department of Energy. The almost the same partial density of states for the fifth H₂ molecule as that of the isolated H₂ molecule, the longer 4.5 Å distance between the fifth H₂ molecule and the Li atom, together with the small NBO charges all reveal the weak electronic field around the Li⁺, which can interpret the weak H₂ adsorption mechanism. Finally, the B₃₈Li₄ structure can easily release 9H₂ molecules at 373 K known from the molecular dynamic simulation and practically trap about 1.08H₂ molecules at 373 K/3 atom condition calculated by the grand partition function. Thus, its reversible practical HGD of B₃₈Li₄-14.34H₂ is 6.18 wt%, which is almost the same value as the theoretical 6.85 wt% for B₃₈(Li–4H₂)₄. Our studies will be the strong theory basis for the future application in hydrogen storage material development.     

Density functional theory study of reversible hydrogen storage in monolayer beryllium hydride by decoration with boron and lithium

The hydrogen storage capacity of M-decorated (M = Li and B) 2D beryllium hydride is investigated using first-principles calculations based on density functional theory. The Li and B atoms were calculated to be successfully and chemically decorated on the Surface of the α-BeH₂ monolayer with a large binding energy of 2.41 and 4.45eV/atom. The absolute value was higher than the cohesive energy of Li and B bulk (1.68, 5.81eV/atom). Hence, the Li and B atoms are strongly bound on the beryllium hydride monolayer without clustering. Our findings show that the hydrogen molecule interacted weakly with B/α-BeH₂(B-decorated beryllium hydride monolayer) with a low adsorption energy of only 0.0226 eV/H₂ but was strongly adsorbed on the introduced active site of the Li atom in the decorated BeH₂ with an improved adsorption energy of 0.472 eV/H₂. Based on density functional theory, the gravimetric density of 28H₂/8li/α-BeH₂) could reach 14.5 wt.% higher than DOE's target of 6.5 wt. % (the criteria of the United States Department of Energy). Therefore, our research indicates that the Li-decorated beryllium hydride monolayer could be a candidate for further investigation as an alternative material for hydrogen storage.     

A first principles study of hydrogen storage in lithium decorated defective phosphorene

In this study, we studied defect-engineering and lithium decoration of 2D phosphorene for effective hydrogen storage using density functional theory. Contrary to graphene, it is found that the presence of point-defects is not preferable for anchoring of H₂ molecules over defective phosphorene. According to previous research, strategies such as defect engineering, metal decoration, and doping enhance the hydrogen storage capacity of several 2D materials. Our DFT simulations show that point defects in phosphorene do not improve the hydrogen storage capacity compared to pristine phosphorene. However, selective lithium decoration over the defective site significantly improves the hydrogen adsorption capacity yielding a binding energy of as high as ?0.48 eV/H₂ in Li-decorated single vacancy phosphorene. Differential charge densities and projected density of states have been computed to understand the interactions and charge transfer among the constituent atoms. Strong polarization of the H₂ molecule is evidenced by the charge accumulation and depletion. The PDOS shows that the presence of Li leads to enhanced charge transfer. The maximum gravimetric density was investigated by sequentially adding H₂ molecules to the Li-decorated single vacancy defective phosphorene. The Li-decorated single vacancy phosphorene is found to possess a gravimetric density of around 5.3% for hydrogen storage.     

Graphene pillared with hybrid fullerene and nanotube as a novel 3D framework for hydrogen storage: A DFT and GCMC study

A new-type 3D pillared graphene framework with hybrid fullerene and nanotube pillars (PGF-hFN) has been created depended on density functional theory (DFT) and first-principles molecular dynamics simulations (MD). It is proved to have excellent thermal structural stability. The average adsorption energy of Li is 2.77 eV much higher than the metal cohesive energy excluding lithium aggregation problem. From DFT calculations, for Li-decorated B-doped PGF-hFN, the hydrogen gravimetric density (HGD) is as high as 12.92 wt% and the according volumetric uptake is 96.4 g/L with an average adsorption energy of 0.195 eV per H₂. Further grand canonical Monte Carlo (GCMC) simulations predict 7.2 wt% in excess HGD and 53.8 g/L in excess volumetric hydrogen density at near ambient temperature (233 K) and 100 bars with the ideal adsorption enthalpy which have exceeded the 2020 the U.S. Department of Energy (DOE) ultimate target for mobile applications. Our multiscale theoretical simulations indicate this new pillared structure should be a promising carrier accessible for sorption of hydrogen molecules.     

Ab initio study of lithium decoration of popgraphene and hydrogen storage capacity of the hybrid nanostructure

The successful realization of extended ‘5-5-8’ line defects in graphene in a controlled way has suggested the possible formation of a new 2D carbon allotrope consisting in pentagonal-octagonal-pentagonal carbon rings. The mechanical and thermal stability of this nanostructure, called popgraphene, has recently been confirmed on the basis of first-principles calculations. Moreover, it has been proposed as a promising anode material for use in Li-ion batteries with fast charge/discharge rates. In the present paper we perform density functional theory calculations to investigate the hydrogen storage ability of popgraphene. Our calculations show that popgraphene can be decorated in a very stable way by placing Li atoms on the pentagonal carbon rings of both sides of the sheet, leaving free the octagonal carbon rings. In that condition, the Li-decorated popgraphene sheet can bind up to four H₂ molecules per unit cell, with an average adsorption energy in a range between physisorption and atomic chemisorption, which would allow for reversible hydrogen storage at moderate temperatures and pressures. Moreover, the gravimetric density of the Li-decorated popgraphene is 4.24 wt%, which is almost equal to the threshold specified by the U.S. Department of Energy for novel hydrogen-storage materials. All these results show that Li-decorated popgraphene nanostructures could be good materials for hydrogen storage.