The 3D ultra-thin Cu1-xNixS/NF nanosheet as a highly efficient and stable electrocatalyst for overall water splitting

In recent years, the exploration of efficient and stable noble-metal-free electrocatalysts is becoming increasingly important, used mainly for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). In this work, a new ultrathin porous Cu_1-xNi_xS/NF nanosheets array was constructed on the 3D nickel skeleton by two-step method: hydrothermal method and vulcanization method. Through these two processes, Cu_1-xNi_xS/NF has a larger specific surface area than that of foamed nickel (NF) and Cu_1-xNi_xO/NF. The Cu_1-xNi_xS/NF materials show excellent catalytic activity by accelerating the electron transfer rate and increase the amount of H₂ and O₂ produced. The lower overpotential was obtained only 350 mV at 20 mA cm⁻² for OER, not only that, but also the same phenomenon is pointed out in HER, optimal Cu_1-xNi_xS/NF presents low overpotentials of 189 mV to reach a current density of 10 mA cm⁻² in 1.0 M KOH for HER. Both OER and HER shows a lower Tafel slope: 51.2 mV dec⁻¹ and 127.2 mV dec⁻¹, subsequently, the overall water splitting activity of Cu_1-xNi_xS/NF was investigated, and the low cell voltage was 1.64 V (current density 10 mA cm⁻²). It can be stable for 14 h during the overall water splitting reaction. These results fully demonstrate that Cu_1-xNi_xS/NF non-precious metal materials can be invoked become one of the effective catalysts for overall water splitting, providing a richer resource for energy storage.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

MoS2/NiFeS2 heterostructure as a highly efficient electrocatalyst for overall water splitting at high current densities

Searching for efficient, stable and low-cost nonprecious catalysts for oxygen and hydrogen evolution reactions (OER and HER) is highly desired in overall water splitting (OWS). Herein, presented is a nickel foam (NF)-supported MoS₂/NiFeS₂ heterostructure, as an efficient electrocatalyst for OER, HER and OWS. The MoS₂/NiFeS₂/NF catalyst achieves a 500 mA cm⁻² current density at a small overpotential of 303 mV for OER, and 228 mV for HER. Assembled as an electrolyzer for OWS, such a MoS₂/NiFeS₂/NF heterostructure catalyst shows a quite low cell voltage (≈1.79 V) at 500 mA cm⁻², which is among the best values of current non-noble metal electrocatalysts. Even at the extremely large current density of 1000 mA cm⁻², the MoS₂/NiFeS₂/NF catalyst presents low overpotentials of 314 and 253 mV for OER and HER, respectively. Furthermore, MoS₂/NiFeS₂/NF shows a ceaseless durability over 25 h with almost no change in the cell voltage. The superior catalytic activity and stability at large current densities (>500 mA cm⁻²) far exceed the benchmark RuO₂ and Pt/C catalysts. This work sheds a new light on the development of highly active and stable nonprecious electrocatalysts for industrial water electrolysis.     

Sulfuration of hierarchical Mn-doped NiCo LDH heterostructures as efficient electrocatalyst for overall water splitting

Constructing efficient bifunctional electrocatalysts for both cathode and anode is of great importance for obtaining green hydrogen by water splitting. Herein, sulfuration of hierarchical Mn-doped NiCo LDH heterostructures (Mn–NiCoS₂/NF) is constructed as a bifunctional electrocatalyst for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) via a facile hydrothermal-annealing strategy. Mn–NiCoS₂/NF shows an overpotential of 310 mV at 50 mA cm⁻² for OER and 100 mV at 10 mA cm⁻² for HER in 1.0 M KOH. Moreover, only 1.496 V@10 mA cm⁻² is required for overall water splitting by using Mn–NiCoS₂/NF as catalyst dual electrodes in a two-electrode system. The excellent performance of Mn–NiCoS₂/NF should be attributed to the ameliorative energy barriers of adsorption/desorption for HO⁻/H₂O through the modification of electronic structure of NiCo basal plane by Mn-doping and the acceleration of water dissociation steps via rich delocalized electron inside sulfur vacancies. The construction of hierarchical Mn–NiCoS₂/NF heterostructures provides new prospects and visions into developing efficient-advanced electrocatalysts for overall water splitting.     

Facile synthesis of bimetallic Ni–Fe phosphide as robust electrocatalyst for oxygen evolution reaction in alkaline media

Bimetallic Ni–Fe phosphide electrocatalysts were in-situ synthesized through direct phosphorization of metal salts on carbon cloth (CC). The Fe dopant remarkably enhances the OER performance of Ni₂P in alkaline medium through the electronic structure modulation of Ni. The (Fe_0.5Ni_0.5)₂P/CC electrode, composed of uniform films coated on carbon fibers, delivers a low overpotential of 260 mV with a small Tafel slope of 45 mV·dec⁻¹ at the current density of 100 mA cm⁻², outperforming most reported non-noble electrocatalysts and commercial RuO₂ electrocatalyst. The (Fe_0.5Ni_0.5)₂P/CC also displays superior electrochemical stability at high current density. An appropriate Fe dopant level facilitates the in-situ transformation of Ni–Fe phosphides into active NiFeOOH during alkaline OER. This work simplifies the synthesis procedure of metal phosphides.     

Local electronic structure modulation of NiVP@NiFeV-LDH electrode for high-efficiency oxygen evolution reaction

The emergence of alternative sustainable energy technologies has stimulated the utilisation of high-efficiency, cost-effective electrodes for renewable energy conversion. The oxygen evolution reaction (OER) is critical for water splitting and rechargeable metal-air batteries. However, the identification of efficient and robust non-noble-metal-based OER electrocatalysts remains a major hurdle for large-scale hydrogen production. Herein, NiVP@NiFeV-LDH heterojunction catalysts were constructed by phosphidation and hydrothermal processing, because OER activity can be improved by coupling NiVP and NiFeV-LDH. NiVP@NiFeV-LDH/NF exhibited remarkable OER performance with an ultralow overpotential of 317 mV at a current density of 100 mA cm⁻² and a Tafel slope of 83.0 mV dec⁻¹ in an alkaline environment. The high efficiency of NiVP@NiFeV-LDH/NF is attributed to increased mass and electron transport because of array structure formation and interfacial electronic structure optimisation, respectively. This work provides a novel approach for augmenting the OER performance of non-noble-metal-based electrocatalysts for energy conversion applications.     

Cu2S/Ni3S2 ultrathin nanosheets on Ni foam as a highly efficient electrocatalyst for oxygen evolution reaction

It is an inevitable choice to find efficient and economically-friendly electrocatalysts to reduce the high overpotential of oxygen evolution reaction (OER), which is the key to improve the energy conversion efficiency of water splitting. Herein, we synthesized Cu₂S/Ni₃S₂ catalysts on nickel foam (NF) with different molar ratios of Ni/Cu by a simple two-step hydrothermal method. Cu₂S/Ni₃S₂-0.5@NF (CS/NS-0.5@NF) effectively reduces the overpotential of OER, displaying small overpotentials (237 mV@100 mA cm^?2 and 280 mV@500 mA cm^?2) in an alkaline solution, along with a low Tafel slope of 44 mV dec^?1. CS/NS-0.5@NF also presents an excellent durability at a relatively high current density of 100 mA cm^?2 for 100 h. The excellent performance is benefited by the prominent structural advantages and desirable compositions. The nanosheet has a high electrochemical active surface area and the porous structure is conducive to electrolyte penetration and product release. This work provides an economically-friendly Cu-based sulfide catalyst for effective electrosynthesis of OER.     

Enriched oxygen vacancy promoted heteroatoms (B,P, N,and S) doped CeO2: Challenging electrocatalysts for oxygen evolution reaction (OER) in alkaline medium

Increasing worldwide energy consumption has prompted considerable study into energy generation and energy storage systems in recent years. Chemical fuels may be produced efficiently via electrocatalytic water splitting, which uses electric and solar power. The development of efficient anodic electrocatalysts for efficient oxygen evolution reaction (OER) is a greater concern of present energy research. Cerium oxide (CeO₂) are promising electrocatalysts that exhibit outstanding OER but their reduced stability obstructs the practical application. A novel strategy was established to construct an effective catalyst of heteroatom (N, B, P and S) doped CeO₂ matrix were prepared. Moreover, the doping of heteroatoms into the CeO₂ matrix processes the improved electronic conductivity, reactive sites, increases the electrochemical catalytic activity, which enhances the water oxidation reaction. Consequently, well-suited alkaline electrolysers were brought together for water oxidation to ideal OER electrocatalytic activity. The OER activity of the electrocatalysts follows the order of S–CeO₂ (190 mV@10 mA cm⁻²), N– CeO₂ (220 mV @10 mA cm⁻²), P– CeO₂ (230 mV @10 mA cm⁻²), B–CeO₂ (250 mV @10 mA cm⁻²) and CeO₂ (260 mV @10 mA cm⁻²) in 1 M of KOH. From the kinetics analysis, Tafel slope value achieved for catalysts CeO₂, B–CeO_2, P–CeO₂, N–CeO₂ and S–CeO₂ are 142 mV dec⁻¹,121 mV dec⁻¹, 102 mV dec⁻¹, 98 mV dec⁻¹ and 83 mV dec⁻¹ respectively. These results validate that the S–CeO₂ electrode is prominent for OER performance with the requirement of cell voltage of 1.42 V at 10 mA cm⁻² current density. In addition, sulphur doped CeO₂ relatively have excellent stability through chrono-potentiometric analysis lasting for 20 h. Although the heteroatoms doped CeO₂ is acts as anode material, the preparation method is widespread, which will reduce the synthesis cost and streamline the preparation of electrode for OER. This research effort delivers a complete advantage for the development of robust, environmentally friendly and highly dynamic electrocatalysts for OER activity.     

Nickel foam-supported Fe,Ni-Polyporphyrin microparticles: Efficient bifunctional catalysts for overall water splitting in alkaline media

Developing highly active, stable and sustainable electrocatalysts for overall water splitting is of great importance to generate renewable H₂ for fuel cells. Herein, we report the synthesis of electrocatalytically active, nickel foam-supported, spherical core-shell Fe-poly(tetraphenylporphyrin)/Ni-poly(tetraphenylporphyrin) microparticles (FeTPP@NiTPP/NF). We also show that FeTPP@NiTPP/NF exhibits efficient bifunctional electrocatalytic properties toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Electrochemical tests in KOH solution (1 M) reveal that FeTPP@NiTPP/NF electrocatalyzes the OER with 100 mA cm⁻² at an overpotential of 302 mV and the HER with 10 mA cm⁻² at an overpotential of 170 mV. Notably also, its catalytic performance for OER is better than that of RuO₂, the benchmark OER catalyst. Although its catalytic activity for HER is slightly lower than that of Pt/C (the benchmark HER electrocatalyst), it shows greater stability than the latter during the reaction. The material also exhibits electrocatalytic activity for overall water splitting reaction at a current density of 10 mA cm⁻² with a cell voltage of 1.58 V, along with a good recovery property. Additionally, the work demonstrates a new synthetic strategy to an efficient, noble metal-free-coordinated covalent organic framework (COF)-based, bifunctional electrocatalyst for water splitting.     

Facile one-pot synthesis of binder-free nano/micro structured dendritic cobalt activated nickel sulfide: a highly efficient electrocatalyst for oxygen evolution reaction

Reasonable design and preparation of non-noble metal electrocatalysts with predominant catalytic activity and long-term stability for oxygen evolution reaction (OER) are essential for electrocatalytic water splitting. Ni foam (NF) is highlighted for its 3D porous structure, impressive conductivity and large specific surface area. Herein, nano/micro structured dendritic cobalt activated nickel sulfide grown on 3D porous NF (Co–Ni₃S₂/NF) has been successfully synthesized by one-step hydrothermal method. Due to the ingenious incorporation of Co, Co–Ni₃S₂/NF electrode shows auspicious electrocatalytic performance for OER compared with Ni₃S₂/NF electrode. As a result, Co–Ni₃S₂/NF needs overpotential of only 274 and 459 mV at current density of 10 and 50 mA cm⁻², respectively, while Ni₃S₂/NF requires overpotential of 344 and 511 mV. At potential of 2.0 V (vs. RHE), Co–Ni₃S₂/NF displays current density of 191 mA cm⁻², while Ni₃S₂/NF just attains current density of only 135 mA cm⁻². Moreover, Co–Ni₃S₂/NF demonstrates excellent stability for uninterrupted OER in alkaline electrolyte. The strategy of designing and preparing cobalt activated nickel sulfide grown on NF renders a magnificent prospect for the development of metal-sulfide-based oxygen evolution catalysts with excellent electrocatalytic performances.     

S/Se dual-doping promotes the formation of active Ni/Fe oxyhydroxide for oxygen evolution reaction of (sea)water splitting

Surface reconstruction produces metal oxyhydroxide (1OOH) active sites, and promoting surface reconstruction is essential for the design of OER electrocatalysts. In this paper, we reported that a large amount of active NiFeOOH was generated in-situ on the surface of nickel-iron sulfide selenide, thus exposing more active sites and efficiently catalyzing OER. In 1 M KOH solution, NiFeOOH(S,Se) achieves an ultra-low overpotential of 195 mV at the current density of 10 mA cm^?2, and the Tafel slope is only 31.99 mV dec^?1, showing excellent catalytic performance. When the current density is 100  mA cm^?2, the over-potential of NiFeOOH(S,Se) in KOH + seawater solution is 239 mV, which is almost equivalent to 231 mV in KOH solution. The excellent OER stability of the NiFeOOH(S,Se) catalyst in alkaline electrolytes was confirmed, and the overpotential did not change significantly after 4 days of testing in KOH + seawater solution.     

Cobalt carbonate hydroxide assisted formation of self-supported CoNi-based Metal–Organic framework nanostrips as efficient electrocatalysts for oxygen evolution reaction

The development of efficient and low-cost electrocatalysts is crucial for improving the efficiency of electrochemical oxygen evolution reaction (OER). Herein, self-supported CoNi-based metal-organic framework (MOF) nanostrips grown on Ni foam (NF) were synthesized with cobalt carbonate hydroxide (CoCH) nanoneedles as a sacrificial template and demonstrated to be highly efficient electrocatalysts for OER. In this approach, the CoCH nanoneedles play a key role in modulating the morphology of CoNi-MOF with reduced thickness and sizes through affording Co source and slowing down the leaching of Ni ions from the NF substrate. The resultant CoNi-MOF/CoCH/NF electrode possesses higher catalytically active surface area and smaller electrochemical impedance than CoCH template-free electrodes, which enable rapid mass transport and charge transfer during OER, thus showing enhanced electrocatalytic activity for OER. In alkaline media (1.0 M KOH), it needs a low overpotential of 251 mV to deliver a current density of 10 mA cm⁻² and exhibits a small Tafel slope of 40.7 mV dec⁻¹ as well as excellent durability. The developed approach may inspire further capability on constructing more promising catalysts for energy related applications.     

Hydrothermally/electrochemically decorated FeSe on Ni-foam electrode: An efficient bifunctional electrocatalysts for overall water splitting in an alkaline medium

A new hybrid catalyst based on Ni foam (NF) and FeSe was prepared by a facial hydrothermal method, in which Se-decorated NF was subsequently electrochemically doped by Fe. Binder-free catalyst containing electrodes were directly tested for the hydrogen and oxygen evolution reaction (HER/OER). The FeSe/NF electrode displayed an OER current density of 100 mA cm⁻² at potential of 1.42 V, and a relatively small Tafel slope of 109 mV dec⁻¹ in a 1 M KOH solution. Also, FeSe/NF electrode exhibited reasonable HER overpotential of 200 mV at 10 mAcm⁻² current density with Tafel slope of 145 mV dec⁻¹. The XRD and TEM studies revealed that the formation of heterogeneous interfaces of NiSe₂ and FeSe₂,generated more active sites that can promote better ions and electron transport in the electrode/electrolyte interfaces. Furthermore, HRTEM analysis indicates that FeSe₂ rich in Se vacancy defects can be created with suitable M − O and M − H bond for better OER and HER performance, respectively. In a-two electrode alkaline water electrolyzer, current densities of 10 mA cm⁻² and 50 mA cm⁻² were obtained at cell voltages of 1.52 V and 1.85 V, respectively, using pure FeSe–NF as both the cathode and anode.     

Hydrogen production via highly efficient electrocatalyst based on 3D NixCo1-x(OH)2/NiFe-AM induce overall water splitting

The main factors limiting water splitting producing hydrogen production are overpotential, activity and persistence of electrocatalysts. Herein, a novel Ni_xCo_1-x(OH)₂ coupled with NiFe amorphous compound array growing on nickel foam substrate (expressed as Ni_xCo_1-x(OH)₂/NiFe-AM) was developed by facile hydrothermal and electrodeposition methods. Significantly, Ni_xCo_1-x(OH)₂/NiFe-AM with this unique structural exhibits superior activity and stability in the two half reactions of water electrolysis. In addition, when tested in an alkaline electrolyte with a current density of 10 mA cm⁻², the overpotentials of HER and OER was 157 mV and 196 mV (60 mA cm⁻²), respectively. The stability can up to 60 h. These test results show through constructing hierarchical nano-thron architecture enhanced electrocatalytic activity to produce hydrogen and oxygen.     

Ternary metal sulfides MoCoNiS derived from metal organic frameworks for efficient oxygen evolution

Developing a highly active and low-cost non-precious metal electrocatalyst for oxygen evolution has been urgent for the clean energy system. Herein, the ternary metal sulfides MoCoNiS supported on nickel foam (MoCoNiS/NF) are successfully prepared using Mo doping Co-based metal-organic framework (Co-MOF) as precursor, which may be helpful for the good dispersion of different metal element. The uniform elements distribution of Mo, Co and Ni on MoCoNiS/NF is determined by all kinds of physical characterization. Mo doping may regulate the electronic environment around Co and Ni, suggesting the potential synergistic effects between different heteroatoms. Electrochemical test shows that MoCoNiS/NF exhibits the excellent OER activity than other single metal or binary metal sulfides as comparison samples, needing only 151 and 226 mV overpotential to achieve current density of 10 (η₁₀ = 151 mV) and 100 mA cm⁻² (η₁₀₀ = 226 mV), respectively. The excellent stability of MoCoNiS/NF has been achieved. The remarkable OER performance of MoCoNiS/NF may due to the synergistic effects and good electrical conductivity as well as the three-dimensional structure of NF as substrate. Therefore, the rational design of MOF derived multi transition metal-based electrocatalysts will be an effective way for increasing OER performance.     

Electroless deposition synthesis of composite catalysts Ni-Fe-P-WO3/NF with superior oxygen evolution performance

The proper construction of high efficiency, low-cost, earth-abundant oxygen evolution reaction (OER) catalyst is essential for hydrogen formation by water splitting. A novel electrocatalyst with highly active OER performance was manufactured by a simple electroless deposition method of Ni-Fe-P-WO₃ on nickel foam (NF). Benefiting from outstanding mass transfer capability of Ni-Fe-P-WO₃/NF heterogeneous structure, abundance of active sites in the amorphous architecture and etc., the Ni-Fe-P-WO₃/NF shows extremely superb electrocatalytic properties compare to noble metal catalyst IrO₂/NF for OER, which needs an overpotential of only 218 mV in 1.0 M KOH solution to achieve the current density of 10 mA cm^?2. It also has remarkable OER activity at high current density that only needs 298 mV to attain 100 mA cm^?2 current density. Moreover, the Ni-Fe-P-WO₃/NF has low Tafel slope of 42 mV dec^?1. This study offers a novel approach to the production of OER multiphase electrocatalysts from oxides and alloys.     

NiCo/Ni/CuO nanosheets/nanowires on copper foam as an efficient and durable electrocatalyst for oxygen evolution reaction

Electrochemical water splitting for hydrogen production is a promising solution for the production of renewable and environmentally friendly energy sources, but it is hindered by the sluggish kinetic process of oxygen evolution reaction (OER). Here, a novel hierarchical core-shell nanoarray NiCo/Ni/CuO/CF was synthesized by assembling Ni–Co hydroxide nanosheets directly on the metallic nickel coated CuO nanowires, as a highly efficient electrocatalyst for alkaline OER. This NiCo/Ni/CuO/CF anode exhibited low overpotentials of 246 mV and 286 mV at current densities of 10 mA cm⁻² and 100 mA cm⁻², respectively, and a small Tafel slope of 37.9 mV dec⁻¹. Moreover, NiCo/Ni/CuO/CF showed robust durability at least 60 h at a current density of 100 mA cm⁻². Detailed investigations verified that the unique nanosheets/nanowires architecture with high conductivity metallic nickel layer can expand the exposure of active sites and accelerate the transport of electrons.     

Composition-controlled chemical bath deposition of Fe-doped NiO microflowers for boosting oxygen evolution reaction

Water electrolysis for green hydrogen production is gaining tremendous attention in the quest towards sustainable energy sources. At the heart of water splitting technology are the electrocatalysts, which facilitate the two half-cell reactions, i.e., the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), with the latter being the most thermodynamically uphill. Herein, we managed to fabricate Ni_1-xFe_xO microflowers (μFs) with varying % of Fe doping (0 < x < 0.36) via an easy chemical bath deposition (CBD) method. The as-synthesized μFs drop-casted on graphene paper (GP) are then applied as electrocatalysts for OER. Compared to contrast catalysts, the electrocatalyst with x_Fe = 0.1 exhibits a lower overpotential of 297 mV at a current density of 10 mA cm⁻², Tafel slope of 44 mV dec⁻¹ and unprecedented turnover frequency of 4.6 s⁻¹ at 300 mV. It is believed that this remarkable electrochemical performance mainly stems from the synergistic effects of Ni and Fe species, working in harmony to enhance charge transfer kinetics and intrinsic activity of the catalyst. This work provides a promising avenue for developing cost-effective and highly active electrocatalysts as advanced electrodes for energy related applications.     

A high-performance oxygen evolution electrocatalyst based on partially amorphous bimetallic cobalt iron boride nanosheet

The oxygen evolution reaction (OER) plays a crucial role in various electrochemical energy conversion devices, but it greatly suffers from sluggish kinetic. Therefore, developing economical and high-active electrocatalysts with superior durability and high efficiency for OER is still a huge challenge. Herein, a partially amorphous nanosheet-liked bimetallic cobalt iron boride is directly grown on the nickel foam (CoFeB-5-30 NS/NF) via a facile electroless plating method and adopted as a catalyst for OER. Benefiting from the rational designed nanosheet array which provides large surface areas and more open-pathways to obtain fast electron transportation and gas release, the resulted CoFeB-5-30 NS/NF catalyst exhibits excellent catalytic activity and superior electrochemical stability in alkaline medium. The obtained CoFeB-5-30 NS/NF exhibits an overpotential of 260 mV to reach the current density of 20 mA cm⁻². Most importantly, the CoFeB-5-30 NS/NF possesses a small Tafel slope of 38 mV dec⁻¹ and excellent stability with insignificant activity degradation after successive electrolytic measurement (for over 60 h) at 20, 50 and 100 mA cm⁻² in 1.0 M KOH, respectively. This work provides a simple and rapid strategy to prepare bimetallic borides and broadens the way for the development of efficient OER catalysts.     

Straightforward preparation of nickel selenide nanosheets supported on nickel foam as a highly efficient electrocatalyst for oxygen evolution reaction

The development of economical, durable, and efficient oxygen evolution reaction (OER) electrocatalysts is essential for large-scale industrial water electrolysis. Here, a straightforward strategy is proposed to synthesize a series of nickel selenide nanosheets supported on nickel foam (NiSe₂/NF) materials by directly selenizing nickel foam substrates at different temperatures under an inert atmosphere. When evaluated as electrocatalysts in OER, the optimal self-supported NiSe₂/NF-350 shows an excellent performance in 1.0 M KOH medium with an overpotential of 458 mV at 100 mA cm^?2, a small Tafel slope of 45.8 mV dec^?1, and a long-term stability for 36 h. Furthermore, the structural and compositional preservation for NiSe₂/NF-350 after stability test was also verified by various characterizations.