Comb-shaped fluorene-based poly(arylene ether sulfone nitrile) as anion exchange membrane

A series of comb-shaped fluorene-based poly (arylene ether sulfone nitrile) (CFPESN–x) was synthesized as anion exchange membranes (AEMs). The well-designed architecture of fluorene-based main chains and comb-shaped C8 long alkyl side chains containing quaternary ammonium groups was responsible for the clear microphase-separated morphologies, as confirmed by small angle X-ray scattering and atomic force microscopy. Moreover, nitrile groups on main chains also showed a profound influence on membrane morphology and properties. CFPESN–x exhibited more interconnected ionic domains with increasing the nitrile group content resulting in higher conductivities and anti-swelling property. Then CFPESN–x exhibited high ionic conductivities in the range of 27.1–91.5 mS cm⁻¹ from 30 to 80 °C and superior ratios of conductivity to swelling ratio at 80 °C at moderate IECs. Moreover, CFPESN–x also showed good mechanical properties and thermal stability, and optimizable alkaline stability and single cell performance.     

Fluorene-containing poly(arylene ether sulfone nitrile)s multiblock copolymers as anion exchange membranes

A series of novel fluorene-containing poly(arylene ether sulfone nitrile)s (FPESN-m/n) multiblock copolymers bearing 1,2-dimethylimidazole groups (ImFPESN-m/n) were synthesized for preparing anion exchange membranes (AEMs). Bromination rather than chloromethylation was used in this work. The bulky and rigid fluorene groups were introduced to force each chain apart to create large interchain spacing. Strong polar nitrile groups were introduced into the hydrophobic segments with the intention of enhancing the anti-swelling property of the AEMs. The length of fluorene–containing hydrophobic segment was varied to study the structure–property of the AEMs. With the ion groups anchored selectively and densely on the hydrophilic segments, all the AEMs exhibited well-defined hydrophilic/hydrophobic microphase-separated structures. As a result, the AEMs showed high hydroxide conductivities in the range of 35.2–118.3 mS cm⁻¹ from 30 to 80 °C and superb ratios of ionic conductivity to swelling at 80 °C. Furthermore, the AEMs also exhibited good mechanical properties, thermal and alkaline stabilities.     

Enhanced ionic conductivity of anion exchange membranes by grafting flexible ionic strings on multiblock copolymers

A new strategy to prepare high-conductivity anion exchange membranes (AEMs) is presented here. A series of phenolphthalein-based poly(arylene ether sulfone nitrile) multiblock AEMs has been synthesized by selectively grafting flexible ionic strings on hydrophilic segments to form ionic regions. Moreover, the phenolphthalein groups are introduced to force chains apart and create additional interchain spacing. In addition, the nitrile groups suspended on main chains are aimed at enhancing the anti-swelling behavior of as-prepared AEMs. Along these processes, well-defined phase separation has been attained, forming excellent ion-transport channels. The effective phase separation has been confirmed by atomic force microscopy. Finally, as-prepared AEMs exhibit a high hydroxide conductivity, ranging from 40.1 to 121.6 mS cm⁻¹ in the temperature range of 30–80 °C, and superior ionic conductivity to IEC ratio at 80 °C. Furthermore, excellent thermal stability and desirable mechanical strength have been rendered by as-prepared AEMs. However, the alkaline stability of as-prepared AEMs requires further optimization.     

Dense 1,2,4,5-tetramethylimidazolium-functionlized anion exchange membranes based on poly(aryl ether sulfone)s with high alkaline stability for water electrolysis

Anion exchange membranes with enough alkaline stability and ionic conductivity are essential for water electrolysis. In this work, a class of anion exchange membranes (PAES-TMI-x) with dense 1,2,4,5-tetramethylimidazolium side chains based on poly(aryl ether sulfone)s are prepared by aromatic nucleophilic polycondensation, radical substitution and Menshutkin reaction. Their chemical structure and hydrophilic/hydrophobic phase morphology are characterized by hydrogen nuclear magnetic resonance (¹H NMR) and atomic force microscope (AFM), respectively. The water uptake, swelling ratio and ionic conductivity for PAES-TMI-x are in the range of 23.8%–48.3%, 8.3%–14.3% and 18.22–96.31 mS/cm, respectively. These AEMs exhibit high alkaline stability, and the ionic conductivity for PAES-TMI-0.25 remains 86.8% after soaking in 2 M NaOH solution at 80 °C for 480 h. The current density of 1205 mA/cm² is obtained for the water electrolyzer equipped with PAES-TMI-0.25 in 2 M NaOH solution at 2.0 V and 80 °C, and the electrolyzer also has good operation stability at current density of 500 mA/cm². This work is expected to provide a valuable reference for the selection and design of cations in high-performance AEMs for water electrolysis.     

Poly(isatin-piperidinium-terphenyl) anion exchange membranes with improved performance for direct borohydride fuel cells

In this work, an effective design strategy for anion exchange membranes (AEMs) incorporating ether-bond free and piperidinium cationic groups promote chemical stability. A series of poly (isatin-piperidium-terphenyl) based AEMs were synthesized by superacid catalyzed polymerization reaction, followed by quaternization. The effect of functionalization on the performance of poly (isatin-N-dimethyl piperidinium triphenyl) (PIDPT-x) AEMs was investigated. Highly reactive N-propargylisatin was introduced into the backbone to achieve high molecular weight polymers (η_a = 2.06–3.02 dL g⁻¹) leading to robust mechanical properties, as well as modulating 1.78–2.00 mmol g⁻¹ of the ion exchange capacity (IEC) of the AEMs by feeding. Apart from that, the rigid non-ionized isatin-terphenyl segment provides AEMs improved dimensional stability with a swelling ratio of less than 12% at 80 °C. Among them, PIDPT-90 exhibited a higher OH⁻ conductivity of 105.6 mS cm⁻¹ at 80 °C. The alkali-stabilized PIDPT-85 AEM was presented, in which OH⁻ conductivity retention maintained 85.6% in a 2 M NaOH at 80 °C after 1632 h. Afterward, the direct borohydride fuel cells (DBFC) with PIDPT-90 membrane as a separator showed an open-circuit voltage of 1.63 V and a peak power density of 75.5 mWcm⁻² at 20 °C. This work demonstrates the potential of poly (isatin- N-dimethyl piperidinium triphenyl) as AEM for fuel cells.     

Facile preparation of poly (2,6-dimethyl-1,4-phenylene oxide)-based anion exchange membranes with improved alkaline stability

Traditional quaternary ammonium (QA)-type anion exchange membranes (AEMs) usually exhibit insufficient alkaline stability, which impede their practical application in fuel cells. To address this issue, a facile method for the simple and accessible preparation of QA-type AEMs with improved alkaline stability was developed in this study. A series of novel AEMs (QPPO-xx-OH) were prepared from commercially available poly (2,6-dimethyl-1,4-phenylene oxide) (PPO) and 3-(dimethylamino)-2,2-dimethyl-1-propanol, via a three-step procedure that included bromination, quaternization, and ion exchange. Scanning electron microscopy revealed that dense, uniform membranes were formed. These QPPO-xx-OH membranes exhibited moderate hydroxide conductivities with ranges of 4–15 mS/cm at 30 °C and 12–36 mS/cm at 80 °C. When tested at similar ion exchange capacity (IEC) levels, the IEC retentions of QPPO-xx-OH membranes were 16–22% higher than that of traditional PPO membranes containing benzyltriethylammonium ions, after immersed in 2 M NaOH aqueous solution at 60 °C for 480 h, and the QPPO-47-OH membrane displayed excellent alkaline stability with the IEC retention of 92% after 480 h. In addition, the QPPO-xx-OH membranes also exhibited robust mechanical properties (tensile strength up to 37.6 MPa) and good thermal stability (onset decomposition temperature up to 150 °C). This study provides a new and scalable method for the facile preparation of AEMs with improved alkaline stability.     

Novel poly(carbazole-butanedione) anion exchange membranes constructed by obvious microphase separation for fuel cells

To develop anion exchange membranes with excellent chemical stability and high performance. A series of quaternary ammonium functionalized (hydrophilic) hydrophobic rigid poly (carbazole-butanedione) (HOCB-TMA-x) anion exchange membranes were prepared, where x represents the percentage content of hydrophobic unit octylcarbazole (OCB). Due to the introduction of hydrophobic rigid unit octylcarbazole and hexyl flexible side chain, the hydrophilic-hydrophobic microstructure of AEMs was developed. The AEMs exhibit excellent overall performance, specifically the low swelling ratio HOCB-TMA-30 membrane exhibits the highest OH^? conductivity of 152.9 mS/cm at 80 °C. Furthermore, the ionic conductivity of AEM decreased by only 9.5% after 2250 h of immersion in 1 M NaOH. The maximum peak power density of a single cell with a current density of 4.38 A/cm² at 80 °C was 1.85 W/cm².     

Cross-linked anion exchange membranes with flexible,long-chain,bis-imidazolium cation cross-linker

Herein, poly (phenylene) oxide (PPO)-based cross-linked anion exchange membranes (AEMs) with flexible, long-chain, bis-imidazolium cation cross-linkers are designed and synthesized. Although the cross-linked membranes possess high ion exchange capacity (IEC) values of up to 3.51–3.94 meq g⁻¹, they have a low swelling degree and good mechanical strength because of their cross-linked structure. Though the membranes with the longest flexible bis-imidazolium cation cross-linker (BMImH-PPO) possess the lowest IEC among these PPO-based AEMs, they show the highest conductivity (24.10 mS cm⁻¹ at 20 °C) and highest power density (325.7 mW cm⁻² at 60 °C) because of the wide hydrophilic/hydrophobic microphase separation in the membranes that promote the construction of ion transport channels, as confirmed by atom force microscope (AFM) images and the small angle X-ray scattering (SAXS) analyses. Furthermore, the BMImH-PPO samples exhibit good chemical stability (10% and 6% decrease in IEC and conductivity, respectively, in 2 M KOH at 80 °C for 480 h, and a 22% decrease in weight in Fenton's reagent at 60 °C for 120 h), making such cross-linked AEMs potentially applicable in alkaline anion exchange membrane fuel cells.     

Synthesis and characterization of long-side-chain type quaternary ammonium-functionalized poly (ether ether ketone) anion exchange membranes

A series of quaternary ammonium salt poly(ether ether ketone) AEMs containing long ether substituents are successfully prepared, and their chemical structure is confirmed by ¹H NMR and FT-IR. The distinct microphase separation morphology of AEMs is observed by TEM. As the content of methylhydroquinone increases, the ion conductivity of AEMs gradually increases. When the content of methylhydroquinone increases to 80%, the hydroxide conductivity of PEEK-DABDA-80 membrane reaches 0.052 S/cm at 80 °C. Meanwhile, it exhibits excellent mechanical properties and anti-swelling ability, with tensile strength of 25 MPa, elongation at break of 8.12% and swelling ratio is only 17.4% at 80 °C. And AEMs also display the better thermal stability. After soaked in 1 M NaOH at 60 °C for 30 days, PEEK-DABDA-80 membrane shows acceptable ion conductivity of 0.021 S/cm at 60 °C. In view of these properties, PEEK-DABDA-x AEMs may display potential application as alkaline AEMs.     

Partially crosslinked comb-shaped PPO-based anion exchange membrane grafted with long alkyl chains: Synthesis,characterization and microbial fuel cell performance

Anion exchange membranes (AEMs) with higher ion exchange capacities (IECw) are limited to applications due to excessive swelling and higher water uptake. Crosslinked macromolecular structures have been a strategy to balance between ionic conductivity and swelling in membranes. However, highly crosslinked AEMs are usually mechanically brittle and poorer in ion transport. Thus we report a series of partially diamine crosslinked (X = 10%, 15%, 20%) comb-shaped AEMs functionalized with dimethylhexadecylammonium groups exhibiting improved flexibility, water uptake and swelling properties over conventional un-crosslinked or fully crosslinked materials. The higher conductivities in these PPO AEM(X) (for example, X = 20%, IECw = 1.96 mmol/g, σ(OH⁻) ~ 67 mS/cm at 80 °C) are attributed to the distinct nanophase separation as observed in SAXS and AFM analyses. Finally, the microbial fuel cell performances of the membranes were compared with commercially available cation and anion exchange membranes.     

Highly alkaline stable fully-interpenetrating network poly(styrene-co-4-vinyl pyridine)/polyquaternium-10 anion exchange membrane without aryl ether linkages

To avoid the detrimental effect of aryl ethers on the alkali stability of anion exchange membrane (AEM), elaborately designed and synthesized poly(styrene-co-4-vinyl pyridine) (PS4VP) copolymer without aryl ether linkages is used to prepare AEMs. By introducing commercialized polyquaternium-10 (PQ-10) as the main ion-conducting molecule, the fully-interpenetrating polymer network quaternized PS4VP/PQ-10 (F-IPN QPS4VP/PQ-10) AEMs are prepared by cross-linking PS4VP and PQ-10, respectively. The as-prepared F-IPN QPS4VP/PQ-10 AEMs have obvious nanoscale microphase-separated morphologies, which ensure the membranes have good mechanical properties and dimensional stability. With optimized component ratios, F-IPN QPS4VP/PQ-10 AEM exhibits high ionic conductivity (74.29 mS/cm at 80 °C) and power density (111.83 mW/cm² at 60 °C), as well as excellent chemical stabilities (94.36% retaining of initial mass after immersion in Fenton reagent at 30 °C for 10 days, and 92.28% retaining of original ionic conductivity after immersion in 1 M NaOH solution at 60 °C for 30 days), which are greater than those of semi-interpenetrating polymer network QPS4VP/PQ-10 AEM. In summary, a combination of fully-interpenetrating polymer network and stable polymer chains and ion-conducting moieties is found to effectively overcome the trade-off between high ionic conductivity and good dimensional/chemical stabilities.     

High chemical stability anion exchange membrane based on poly(aryl piperidinium): Effect of monomer configuration on membrane properties

In recent years, ether-free polyaryl polymers prepared by superacid-catalyzed Friedel-Crafts polymerization have attracted great research interest in the development of anion exchange membranes(AEMs) due to their high alkali resistance and simple synthesis methods. However, the selection of monomers for high-performance polymer backbone and the relationship between polymer structure construction and properties need further investigated. Herein, a series of free-ether poly(aryl piperidinium) (PAP) with different polymer backbone steric construction were synthesized as stable anion exchange membranes. Meta-terphenyl, p-terphenyl and diphenyl-terphenyl copolymer were chosen as monomers to regulate the spatial arrangement of the polymer backbone, which tethered with stable piperidinium cation to improve the chemical stability. In addition, a multi-cation crosslinking strategy has been applied to improve ion conductivity and mechanical stability of AEMs, and further compared with the performance of uncrosslinked AEMs. The properties of the resulting AEMs were investigated and correlated with their polymer structure. In particular, m-terphenyl based AEMs exhibited better dimensional stability and the highest hydroxide conductivity of 144.2 mS/cm at 80 °C than other membranes, which can be attributed to their advantages of polymer backbone arrangement. Furthermore, the hydroxide conductivity of the prepared AEMs remains 80%–90% after treated by 2 M NaOH for 1600 h, exhibiting excellent alkaline stability. The single cell test of m-PTP-20Q4 exhibits a maximum power density of 239 mW/cm² at 80 °C. Hence, the results may guide the selection of polymer monomers to improve performance and alkaline durability for anion exchange membranes.     

End-group crosslinked hexafluorobenzene contained anion exchange membranes

A kind of anion exchange membranes (AEMs) with CC bond end-group crosslinked structure was synthesized successfully. Unlike the traditional aliphatic AEMs, the AEMs were prepared in this work by a strategy to realize the CC bond thermal end-group crosslinking reaction, exhibiting an obvious microphase separation structure and a suitable dimensional stability. The well-defined ion channels constructed in the AEMs guarantee the fast OH⁻ conduction, as confirmed via physical and chemical characterization. The conductivity was dramatically enhanced due to the effective ion channels and increased ion exchange capacity. Among the as-prepared AEMs, the PHFB-VBC-DQ-80% AEM has a conductivity of 135.80 mS cm⁻¹ at 80 °C. The single cell based on PHFB-VBC-DQ-80% can achieve a power density of 141.7 mW cm⁻² at a current density of 260 mA cm⁻² at 80 °C. The AEMs show good thermal stability verified by a thermogravimetric analyzer (TGA). Furthermore, the ionic conductivity of PHFB-VBC-DQ-80% only decreased by 7.1% after being soaked in a 2 M NaOH solution at 80 °C for 500 h.     

Macromolecular crosslink of imidazole functionalized poly(vinyl alcohol) and brominated poly(phenylene oxide) for anion exchange membrane with enhanced alkaline stability and ionic conductivity

Anion exchange membranes (AEMs) are important energy conversion device for fuel cell applications, where the overall redox reaction happened. Both alkaline stability and ionic conductivity should be considered in the long-term use of fuel cells. In this work, imidazole functionalized polyvinyl alcohol was designed as the functional macromolecular crosslinking agent to fabricate crosslinked AEMs with brominated poly(phenylene oxide) matrix. Benefitting from the macromolecular crosslinked structure, the membranes displayed enhanced ionic conductivity and alkaline stability at elevated temperature. Moreover, membrane with ion exchange capacity of 1.54 mmol/g displayed ionic conductivity of 78.8 mS/cm at 80 °C, and the conductivity could maintain 75% of the initial value after immersion in 1 M NaOH solution at 80 °C for 1000 h. Moreover, a peak power density of 105 mW/cm² was achieved when the assembled single cell with c-91 was operated at 60 °C. These results indicated that the construction of macromolecular crosslinked AEMs have great potential in the practical application of anion exchange membranes fuel cells.     

Synthesis and characterization of a long side-chain double-cation crosslinked anion-exchange membrane based on poly(styrene-b-(ethylene-co-butylene)-b-styrene)

By choosing a triple block polymer, poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS), as the backbone and adopting a long side-chain double-cation crosslinking strategy, a series of SEBS-based anion-exchange membranes (AEMs) was successively synthesized by chloromethylation, quaternization, crosslinking, solution casting, and alkalization. The 70C16-SEBS-TMHDA membrane showed high OH⁻ conductivity (72.13 mS/cm at 80 °C) and excellent alkali stability (only 10.86% degradation in OH⁻ conductivity after soaking in 4-M NaOH for 1700 h at 80 °C). Furthermore, the SR was only 9.3% at 80 °C and the peak power density of the H₂/O₂ single cell was up to 189 mW/cm² at a current density of 350 mA/cm² at 80 °C. By introducing long flexible side chains into a polymer SEBS backbone, the structure of the hydrophilic–hydrophobic microphase separation in the membrane was constructed to improve the ionic conductivity. Additionally, network crosslinked structure improved dimensional stability and mechanical properties.     

Synthesis and properties of new side-chain-type poly(arylene ether sulfone)s containing tri-imidazole cations as anion-exchange membranes

In order to enhance the properties of polymer anion-exchange membranes (AEMs), a class of side-chain-type poly (arylene ether sulfone)s containing tri-imidazole cations in pendant phenoxyphenyl spacer (i.e., Im-PES-xx) were designed and prepared by polymer grafting reaction. Based on these imidazole functionalized polymers, a series of new AEMs were successfully prepared by their solution coating and ion exchange. The obtained membranes exhibited good alkaline stability with the retention of ion-exchange capacity in the range of 78.5%–83.3% after immersion in 4 M NaOH solution at 80 °C for 336 h. The membranes also had high hydroxide conductivity with the values of 34.1–70.5 mS cm^?1 at 80 °C. Meanwhile, these membranes possessed good dimensional stability, and their swelling ratio was in the range of 2.5%–7.0% at 80 °C. The incorporation of the dense and local imidazole cations in the side chains for AEMs plays an important role for their properties.     

Preparation and characterization of a polyvinyl alcohol grafted bis-crown ether anion exchange membrane with high conductivity and strong alkali stability

A new type of symmetrical bis-crown ether is prepared by connecting dibenzo-18-crown-6 ether on both sides of the chromotropic acid, and then grafting the aforementioned bis-crown ether onto polyvinyl alcohol matrix to prepare a series of anion exchange membranes (AEMs), which their have high conductivity and strong alkali stability. These synthesized membranes were named B-C_X%-P AEMs (x is the mass percentage of the symmetrical bis-crown ether (B–C)). Then, the chemical structure of aforementioned AEMs were verified by means of ¹H NMR, FT-IR and UV. Meanwhile, the OH⁻ conductivity, alkaline stability and single cell performance of the synthesized membrane were also investigated. The results revealed that the conductivity of B–C_30%-P membrane is the highest at 80 °C (235 mS cm⁻¹), and the power density is also the highest (197 mW cm⁻²), and the alkali stability of the membrane synthesized in this paper was also improved. The conductivity at 80 °C was only reduced by 4%, which was obtained by immersing the B–C_30%-P membrane immersed in 6 mol L⁻¹ KOH solution for 168 h, which the aforementioned results proved that the synthesized membrane in this research had excellent OH⁻ conductivity and alkaline stability.     

High alkaline stability and long-term durability of imidazole functionalized poly(ether ether ketone) by incorporating graphene oxide/metal-organic framework complex

The poly(ether ether ketone) (PEEK) was prepared as organic matrix. ZIF-8 and GO/ZIF-8 were used as fillers. A series of novel new anion exchange membranes (AEMs) were fabricated with imidazole functionalized PEEK and GO/ZIF-8. The structure of ZIF-8, GO/ZIF-8 and polymers are verified by ¹H NMR, FT-IR and SEM. This series of hybrid membranes showed good thermal stability, mechanical properties and alkaline stability. The ionic conductivities of hybrid membranes are in the range of 39.38 mS cm^?1–43.64 mS cm^?1 at 30 °C, 100% RH and 59.21 mS cm^?1–86.87 mS cm^?1 at 80 °C, 100% RH, respectively. Im-PEEK/GO/ZIF-8-1% which means the mass percent of GO/ZIF-8 compound in Im-PEEK polymers is 1%, showed the higher ionic conductivity of 86.87 mS cm^?1 at 80 °C and tensile strength (38.21 MPa) than that of pure membrane (59.21 mS cm^?1 at 80 °C and 19.47 MPa). After alkaline treatment (in 2 M NaOH solution at 60 °C for 400 h), the ionic conductivity of Im-PEEK/GO/ZIF-8-1% could also maintain 92.01% of the original ionic conductivity. The results show that hybrid membranes possess the ability to coordinate trade-off effect between ionic conductivity and alkaline stability of anion exchange membranes. The excellent performances make this series of hybrid membranes become good candidate for application as AEMs in fuel cells.     

Polyaryl piperidine anion exchange membranes with hydrophilic side chain

Recently, the development of high-performance and durable anion exchange membranes has been a top priority for anion exchange membrane fuel cells. Here, a series of polyaryl piperidine anion exchange membranes with hydrophilic side chain (qBPBA-80-OQ-x) are prepared by the superacid-catalyzed Friedel-Crafts reaction. AFM images show that the hydrophilic side chain and hydrophobic main chain form a distinct microphase separation structure. The AEMs of qBPBA-80-OQ-100 and qBPBA-80 have close mechanical strength, but the ionic conductivity of the former (81 mS/cm, 80 °C) is higher than the latter (73 mS/cm, 80 °C). In addition, qBPBA-80-OQ-100 AEM loses by 15.0% after an alkaline treatment of 720 h, while qBPBA-80 AEM loses by 17.8%. The results indicate that the introduction of hydrophilic side chain not only promotes the formation of microphase separation structure, but also improves the ionic conductivity and alkaline resistance of polyaryl piperidine AEMs.     

Mechanically robust semi-interpenetrating polymer network via thiol-ene chemistry with enhanced conductivity for anion exchange membranes

Anion exchange membranes (AEMs) have emerged as crucial functional materials in various electrochemical device, such as fuel cell. Both the mechanical property and ionic conductivity play important roles in AEMs. Herein, a series of semi-interpenetrating polymer network AEMs are prepared by introducing flexible polyvinyl alcohol to the rigid photo-crosslinked poly (2,6-dimethyl-1,4-phenylene oxide) network. Such strategy endows AEM with tunable composition and mechanical property. Among these AEMs, membrane with an IEC of 1.46 mmol/g shows the highest mechanical strength of 30.8 MPa and a relatively lower swelling ratio, as well as the highest hydroxide conductivity. Importantly, the alkaline stability of these AEMs has been improved, 66.5% of the hydroxide conductivity is maintained after treatment in 1 M NaOH at 80 °C for 1000 h. Tentative assembly of H₂/O₂ fuel cell at 60 °C with this AEM displays a peak power density of 78 mW/cm². All the results demonstrate that sIPN structure is a promising way to enhance the mechanical property, ionic conductivity, and the alkaline stability of AEMs for the future application in AEMFCs.