Electrodeposited Ni-Co-Sn alloy as a highly efficient electrocatalyst for water splitting

Water splitting to produce hydrogen and oxygen is considered as a feasible solution to solve the current energy crisis. It is highly desirable to develop inexpensive and efficient electrocatalyst for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In this paper, nanostructured Ni-Co-Sn alloys were electrodeposited on copper foil and the excellent electrocatalytic performances for both HER and OER in alkaline media were achieved. The optimized Ni-Co-Sn electrode shows a low onset overpotential of −18 mV and a small Tafel slope of 63 mV/dec for the HER, comparable to many state-of-the-art non-precious metal HER catalysts. For the OER, it produces an overpotential of 270 mV (1.50 V vs. RHE) at current density of 10 mA/cm², which is better than that of the commercial Ir/C catalyst. In addition to high electrocatalytic activities, it exhibits good stability for both HER and OER. This is the first report that Ni-Co-Sn is served as a cost-effective and highly efficient bifunctional catalyst for water splitting and it will be of great practical value.     

Bimetallic metal-organic framework derived electrocatalyst for efficient overall water splitting

The development of bifunctional catalysts that can be applied to both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is widely regarded as a key factor in the production of sustainable hydrogen fuel by electrochemical water splitting. In this work, we present a high-performance electrocatalyst based on nickel-cobalt metal-organic frameworks for overall water splitting. The as-obtained catalyst shows low overpotential to reaches the current density of 10 mA cm⁻² with 249 mV for OER and 143 mV for HER in alkaline media, respectively. More importantly, when the electrolyzer was assembled with the as-prepared catalyst as anode and cathode simultaneously, it demonstrates excellent activity just applies a potential of 1.68 V to achieve 10 mA cm⁻² current density for overall water splitting.     

Self-standing and efficient bifunctional electrocatalyst for overall water splitting under alkaline media enabled by Mo1-xCoxS2 nanosheets anchored on carbon fiber paper

The layered MoS₂ nanostructures have been widely used in the electrochemical hydrogen evolution reaction (HER), but rarely applied in overall water splitting application for their ignorable oxygen evolution reaction (OER) activity. To address this issue, a novel self-standing and bifunctional electrocatalyst, consisting of Co-doped MoS₂ nanosheets anchored on carbon fiber paper, has been prepared via hydrothermal method. Taking advantage of conductive substrate of carbon fiber paper, sufficient-exposed active edges of MoS₂ sheets, and metallic character caused by Co-doping, our electrode exhibits high-efficient bifunctional activities for the overall water splitting in alkaline electrolyte (1 M KOH), which can produce a current density of 20 mA cm⁻² at an overpotential of 197 mV for HER and 235 mV for OER.     

Mesoporous nickel-sulfide/nickel/N-doped carbon as HER and OER bifunctional electrocatalyst for water electrolysis

The development of non-precious metal-based highly active bi-functional electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is critical factor for making water electrolysis a viable process for large-scale industrial applications. In this study, bi-functional water splitting electrocatalysts in the form of nickel-sulfide/nickel nanoparticles integrated into a three-dimensional N-doped porous carbon matrix, are prepared using NaCl as a porous structure-forming template. Microstructures of the catalytic materials are characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and N₂ adsorption-desorption analysis. The most active catalyst synthesized in this study exhibits a low HER overpotential of 70 mV at 10 mA cm⁻² and a low Tafel slope of 45 mV dec⁻¹. In OER, the optimized sample performs better than a state-of-the-art RuO₂ catalyst and produces an overpotential of 337 mV at 10 mA cm⁻², lower than that of RuO₂. The newly obtained materials are also used as HER/OER electrocatalysts in a specially assembled two-electrode water splitting cell. The cell demonstrates high activity and good stability in overall water splitting.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

MoS2/NiFeS2 heterostructure as a highly efficient electrocatalyst for overall water splitting at high current densities

Searching for efficient, stable and low-cost nonprecious catalysts for oxygen and hydrogen evolution reactions (OER and HER) is highly desired in overall water splitting (OWS). Herein, presented is a nickel foam (NF)-supported MoS₂/NiFeS₂ heterostructure, as an efficient electrocatalyst for OER, HER and OWS. The MoS₂/NiFeS₂/NF catalyst achieves a 500 mA cm⁻² current density at a small overpotential of 303 mV for OER, and 228 mV for HER. Assembled as an electrolyzer for OWS, such a MoS₂/NiFeS₂/NF heterostructure catalyst shows a quite low cell voltage (≈1.79 V) at 500 mA cm⁻², which is among the best values of current non-noble metal electrocatalysts. Even at the extremely large current density of 1000 mA cm⁻², the MoS₂/NiFeS₂/NF catalyst presents low overpotentials of 314 and 253 mV for OER and HER, respectively. Furthermore, MoS₂/NiFeS₂/NF shows a ceaseless durability over 25 h with almost no change in the cell voltage. The superior catalytic activity and stability at large current densities (>500 mA cm⁻²) far exceed the benchmark RuO₂ and Pt/C catalysts. This work sheds a new light on the development of highly active and stable nonprecious electrocatalysts for industrial water electrolysis.     

Bifunctional nanoporous ruthenium-nickel alloy nanowire electrocatalysts towards oxygen/hydrogen evolution reaction

A class of ruthenium-nickel alloy catalysts featured with nanoporous nanowires (NPNWs) were synthesized by a strategy combining rapid solidification with two-step dealloying. RuNi NPNWs exhibit excellent electrocatalytic activity and stability for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in which the RuNi-2500 NPNWs catalyst shows an OER overpotential of 327 mV to deliver a current density of 10 mA cm^?2 and the RuNi-0 NPNWs catalyst requires the overpotential of 69 mV at 10 mA cm^?2 showing the best HER activity in alkaline media. Moreover, the RuNi-1500 NPNWs catalyst was used as the bifunctional electrocatalyst in a two-electrode alkaline electrolyzer for water splitting, which exhibits a low cell voltage of 1.553 V and a long-term stability of 24 h at 10 mA cm^?2, demonstrating that the RuNi NPNWs catalysts can be considered as promising bifunctional alkaline electrocatalysts.     

Effect of iron on Ni–Mo–Fe composite as a low-cost bifunctional electrocatalyst for overall water splitting

By increasing demand for hydrogen and oxygen gas for energy and industrial applications, designing a cheap, high-efficiency, and bifunctional electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) seems necessary. For this purpose Ni–Mo–Fe as a bifunctional electrocatalyst was synthesized by one-step electrodeposition. From this electrocatalyst with optimal composition and current density, a small overpotential of 65, 161 mV for delivering 10, 100 mA/cm² on HER in alkaline media was achieved. As-fabricated electrode exhibited 344,408 mV for delivering 10, 100 mA/cm² in OER. Furthermore, this electrocatalyst shows high stability and negligible degradation in overpotential for HER and OER under long term stability tests in alkaline media. The notable function of As-fabricated Ni–Mo–Fe is due to the synergism effect between Ni, Mo, and Fe element and binder-free structure. Owing to the high-performance and high-stability of Ni–Mo–Fe electrocatalyst under Hydrogen and Oxygen evolution reactions is a candidate for industrial uses in the alkaline electrolyzer.     

Controlled synthesis of NiCoM (M=P,S, Se,O)–Ni3S2–MoS2 hybrid material as environmentally friendly water splitting catalyst

The study of high efficiency and low cost catalysts is of great significance to the overall development of electrochemistry. In this paper, NiCoM (M = P, S, Se, O)–Ni₃S₂–MoS₂ hybrid material was prepared by hydrothermal, calcination and hydrothermal three-step reaction method, and its hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline environment were studied and compared. The experimental results showed that at 10 mA cm^?2, the overpotential of NiCoP–Ni₃S₂–MoS₂ was only 140 mV for HER, while the overpotential of NiCoSe–Ni₃S₂–MoS₂ was only 160 mV for OER. Compared with other catalysts, the activity of NiCoP–Ni₃S₂–MoS₂ and NiCoSe–Ni₃S₂–MoS₂ was higher, and the chemical reagents needed for preparation were cheap and low cost. What is noteworthy is that the morphology of NiCoP–Ni₃S₂–MoS₂ material change after long time stability test for hydrogen evolution reaction, the change makes the performance of the samples toward a better direction. A series of characterization found that the surface of the NiCoP–Ni₃S₂–MoS₂ samples increased more holes and more active site, and did not produce new material after other characterization. Density functional theory calculation shows that the presence of this MoS₂ material accelerates the kinetics of hydrogen production and this Co₂P material enhances the conductivity of the material. Their synergistic effect makes the NiCoP–Ni₃S₂–MoS₂ catalyst exhibit enhanced hydrogen production activity. The bramble structure of NiCoSe–Ni₃S₂–MoS₂ allows the sample to have more active sites and higher electrocatalytic activity during the OER process. This experiment provides new insights into the preparation of robust water splitting catalysts by simple methods.     

Black phosphorous dots phosphatized bio-based carbon nanofibers/bimetallic organic framework as catalysts for oxygen evolution reaction

As a multi-step and more complex half-cell reaction than the hydrogen reverse evolution reaction (HER), the oxygen evolution reaction (OER) always requires a higher overpotential than HER. In order to minimize the associated energy loss as an overpotential, these electrochemical half-reactions of water splitting should be catalyzed by suitable materials. Due to the abundant exposed surface area and extensive active edge sites, black phosphorous quantum dots (BP QDs) have shown great potential in OER. Here, BP QDs was introduced to incorporate with bio-based carbon nanofibers (CNF) and Co–Ni bimetallic organic framework (CoNiMOF), preparing a novel catalyst for oxygen evolution reaction (OER) by a facile one-pot reaction (Scheme 1). The unique structures and greater BET surface areas of CoNiMOF-BP QDs/CNF could possibly supply a larger electrocatalytic surface, expose further active sites. The obtained CoNiMOF-BP QDs/CNF possesses excellent electrocatalytic activity in alkaline electrolyte (1 M KOH) with a low overpotential of 281 mV at 10 mA cm^?2 and a low Tafel slope of 111.9 mV dec^?1. The CoNiMOF-BP QDs/CNF can remain stable for 25,000 s under alkaline electrolyte, showing excellent stability. The increase of electrocatalyst activity is mainly attributed to the synergistic effect of excellent conductivity and enriched active sites arising from BP QDs. This work not only provides an effective strategy for the development of bimetallic MOFs derived electrocatalysts, but also puts forward a new insight for the application of BP QDs in water splitting.     

High throughput preparation of Ni–Mo alloy thin films as efficient bifunctional electrocatalysts for water splitting

The synthesis of cost-effective and high-performance electrocatalysts for water splitting is the main challenge in electrochemical hydrogen production. In this study, we adopted a high throughput method to prepare bi-metallic catalysts for oxygen/hydrogen evolution reactions (OER/HER). A series of Ni–Mo alloy electrocatalysts with tunable compositions were prepared by a simple co-sputtering method. Due to the synergistic effect between Ni and Mo, the intrinsic electrocatalytic activity of the Ni–Mo alloy electrocatalysts is improved, resulting in excellent HER and OER performances. The Ni₉₀Mo₁₀ electrocatalyst shows the best HER performance, with an extremely low overpotential of 58 mV at 10 mA cm^?2, while the Ni₄₀Mo₆₀ electrocatalyst shows an overpotential of 258 mV at 10 mA cm^?2 in OER. More significantly, the assembled Ni₄₀Mo₆₀//Ni₉₀Mo₁₀ electrolyzer only needs a cell voltage of 1.57 V to reach 10 mA cm^?2 for overall water splitting.     

Co/Mo2C composites for efficient hydrogen and oxygen evolution reaction

Non-precious transition metal electrocatalysts with high catalytic performance and low cost enable the scalable and sustainable production of hydrogen energy through water splitting. In this work, based on the polymerization of CoMoO₄ nanorods and pyrrole monomer, a heterointerface of carbon-wrapped and Co/Mo₂C composites are obtained by thermal pyrolysis method. Co/Mo₂C composites show considerable performance for both hydrogen and oxygen evolution in alkaline media. In alkaline media, Co/Mo₂C composites show a small overpotential, low Tafel slope, and excellent stability for water splitting. Co/Mo₂C exhibits a small overpotential of 157 mV for hydrogen evolution reaction and 366 mV for oxygen evolution reaction at current density of 10 mA cm⁻², as well as a low Tafel slope of 109.2 mV dec⁻¹ and 59.1 mV dec⁻¹ for hydrogen evolution reaction and oxygen evolution reaction, respectively. Co/Mo₂C composites also exhibit an excellent stability, retaining 94% and 93% of initial current value for hydrogen evolution reaction and oxygen evolution reaction after 45,000 s, respectively. Overall water splitting via two-electrode water indicates Co/Mo₂C can hold 91% of its initial current after 40,000 s in 1 M KOH.     

Binder-free bifunctional SnFe sulfide/oxyhydroxide heterostructure electrocatalysts for overall water splitting

Developing robust non-noble catalysts towards hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is vital for large-scale hydrogen production from electrochemical water splitting. Here, we synthesize Sn- and Fe-containing sulfides and oxyhydroxides anchored on nickel foam (SnFeS_xO_y/NF) using a solvothermal method, in which a heterostructure is generated between the sulfides and oxyhydroxides. The SnFeS_xO_y/NF exhibits low overpotentials of 85, 167, 249, and 324 mV at 10, 100, 500 and 1000 mA cm^?2 for the HER, respectively, and a low overpotential of only 281 mV at 100 mA cm^?2 for the OER. When it serves as both anode and cathode to assemble an electrolyzer, the cell voltage is only 1.69 V at 50 mA cm^?2. The sulfides should be the efficient active species for the HER, while the oxyhydroxides are highly active for the OER. The unique sulfide/oxyhydroxide heterostructure facilitates charge transfer and lowers reaction barrier, thus promoting electrocatalytic processes.     

Preparation of ultrathin molybdenum disulfide dispersed on graphene via cobalt doping: A bifunctional catalyst for hydrogen and oxygen evolution reaction

The development of highly active and low-cost catalysts for hydrogen evolution reaction (HER) is significant for the development of clean and renewable energy research. Owing to the low H adsorption free energy, molybdenum disulfide (MoS₂) is regarded as a promising candidate for HER, but it shows low activity for oxygen evolution reaction (OER). Herein, graphene-supported cobalt-doped ultrathin molybdenum disulfide (Co–MoS₂/rGO) was synthesized via a one-pot hydrothermal method. The obtained hybrids modified electrode exhibits a high HER catalytic activity with a low overpotential of 147 mV at the current density of 10 mA cm⁻², a small Tafel slope of 49.5 mV dec⁻¹, as well as good electrochemical stability in acidic electrolyte. Meanwhile, the catalyst shows remarkable OER activity with a low overpotential of 347 mV at 10 mA cm⁻². The superior activity is ascribed not only to the high conductivity originated from the reduced graphene, but also to the synergistic effect between MoS₂ and cobalt.     

Strategies for improving Co/Ni-based bimetal-organic framework to water splitting

The preparation of high-efficiency, stable, and low-cost oxygen evolution reactions (OER) and hydrogen evolution reactions (HER) electrocatalysts remains a challenge for new energy systems. In this study, three-dimensional (3D) cobalt-nickel bimetal MOFs were used as precursors to synthesize catalysts through thermal decomposition, carbonization, nitriding, oxidation, phosphating, sulfurizing, and selenization, respectively. In 1.0 M KOH electrolyte, the overpotential of Co/Ni-MOFs@Se for OER was 238 mV and the that of Co/Ni-MOFs@P for HER was 194 mV at a current density of 10 mA cm⁻². Based on the excellent OER and HER performances of Co/Ni-MOFs@Se and Co/Ni-MOFs@P, these two materials were further assembled into electrodes for overall water splitting. Results showed that a potential of only 1.59 V was required to provide a current density of 10 mA cm⁻². The electrodes also exhibited long-term durability in a 2000 min stability test without significant changes in the catalytic performances. According to the difference in the doped non-metal elements, an electrode pair with a suitable matching degree was constructed, thereby improving the overall water splitting performance. Thus, the controllable modification of the metal-organic frameworks (MOFs)-derived carbon materials (CMs) effectively improved the materials’ catalytic water splitting performance. It was possible to further develop an efficient, inexpensive, and low-cost assembled electrode pair.     

Ultrathin MoS2 nanosheets in situ grown on rich defective Ni0.96S as heterojunction bifunctional electrocatalysts for alkaline water electrolysis

Developing earth-abundant and highly active bifunctional electrocatalysts are critical to advance sustainable hydrogen production via alkaline water electrolysis but still challenging. Herein, heterojunction hybrid of ultrathin molybdenum disulfide (MoS₂) nanosheets and non-stoichiometric nickel sulfide (Ni_0.96S) is in situ prepared via a facile one-step hydrothermal strategy, followed by annealing at 400 °C for 1 h. Microstructural analysis shows that the hybrid is composed of intimate heterojunction interfaces between Ni_0.96S and MoS₂ with exposed active edges provided by ultrathin MoS₂ nanosheets and rich defects provided by non-stoichiometric Ni_0.96S nanocrystals. As expected, it is evaluated as bifunctional electrocatalysts to produce both hydrogen and oxygen via water electrolysis with a hydrogen evolution reaction (HER) overpotential of 104 mV at 10 mA cm⁻² and an oxygen evolution reaction (OER) overpotential of 266 mV at 20 mA cm⁻² under alkaline conditions, outperforming most current noble-metal-free electrocatalysts. This work provides a simple strategy toward the rational design of novel heterojunction electrocatalysts which would be a promising candidate for electrochemical overall water splitting.     

N-doped carbon wrapped CoFe alloy nanoparticles with MoS2 nanosheets as electrocatalyst for hydrogen and oxygen evolution reactions

Developing efficient and cost-effective transition metal-based electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is crucial to generate clean and renewable hydrogen energy. The construction of hybrid catalysts with multiple active sites is an effective approach to promote catalytic performance. Herein, a molybdenum disulfide (MoS₂)-based hybrid with N-doped carbon wrapped CoFe alloy (MoS₂/CoFe@NC) was synthesized through a typical hydrothermal method. The MoS₂/CoFe@NC exhibits excellent electrocatalytic performance with overpotentials of 172 mV for HER and 337 mV for OER at 10 mA cm⁻², and long-term stability of 24-h electrolytic reaction in 1 M KOH solution. The chemical coupling between MoS₂ and CoFe@NC provides improved electronic structures and more accessible active sites. The CoFe@NC substrate accelerates the charge transfer to MoS₂ through a synergistic effect. This work demonstrates that the CoFe@NC is a promising substrate for depositing MoS₂ nanosheets (NSs) to achieve excellent catalytic performance for both HER and OER.     

Self-supported hierarchical porous FeNiCo-based amorphous alloys as high-efficiency bifunctional electrocatalysts toward overall water splitting

Rationally designing an efficient and cost-effective bifunctional electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is a primary matter in applying electrocatalytic water splitting. Herein, a self-supported FeNiCo-based amorphous catalyst with a hierarchical micro/nanoporous structure is fabricated by dealloying an amorphous/nanocrystalline precursor. The amorphous nanoporous framework enables the prepared electrocatalyst to afford fast reaction kinetics, abundant active sites, and enhanced electrochemical active surface areas (ECSAs). Such structural advantages and the synergistic effects of the ternary transition metals contribute to a dramatic catalytic activity of this electrocatalyst under alkaline conditions, which delivers the current density of 10 mA cm⁻² at a low overpotential of 134 mV for HER and 206 mV for OER, respectively. Furthermore, a full electrolysis apparatus constructed by the self-supported hierarchical micro/nanoporous FeNiCo-based amorphous electrocatalyst as both cathode and anode acquires a dramatically low voltage of 1.58 V operating at 10 mA cm⁻² along with stability for more than 24 h for overall water splitting.     

Bifunctional electrocatalysts for water splitting from a bimetallic (V doped-NixFey) Metal–Organic framework MOF@Graphene oxide composite

An ongoing challenge still lies in the exploration of proficient electrocatalysts from earth-abundant non-precious metals instead of noble metal-based catalysts for clean hydrogen energy through large-Scale electrochemical water splitting. However, developing a non-precious transition metals based, stable electrocatalyst for cathodic hydrogen evolution reaction (HER) and anodic oxygen evolution reaction (OER) is important challenge for modern energy conversion technology. In this report Vanadium doped bimetallic nickel-iron nanoarray, fabricated by carbon supported architecture through carbonization process for electrochemical water splitting. Three types of catalysts were prepared in different molar ratio of Ni/Fe. The electrocatalytic performance demonstrated that the catalyst with equal mole ratio (0.06:0.06) of Ni/Fe possess high catalytic activity for both OER and HER in alkaline and acidic medium. Besides, our findings revealed that the doping of vanadium could play a strong synergetic effect with Ni/Fe, which provide a small overpotential of 90 mV and 210 mV at 10 mA cm^?2 for HER and OER respectively compared to the other two catalyst counterparts. Also, the catalyst with 1:1 (Ni/Fe) molar ratio showed a high current density of 208 mA cm^?2 for HER at 0.5 M H₂SO₄ and 579 mA cm^?2 for OER at 1 M KOH solution, the both current densities are much higher than the other two catalysts (different Ni/Fe ratio). In addition, the presented catalysts showed extremely good durability, reflecting in more than 20 h of consistent Chronoamprometry study at fixed overpotential η = 250 mV without any visible voltage elevation. Similarly, the (Ni/Fe) equal ratio catalyst showed better corrosion potential 0.209 V vs Ag/AgCl and lower current density 0.594 × 10^?12 A cm^?2 in high alkaline medium. The V-doping, MOF/GO surface defects are significantly increased the corrosion potential of the V-Ni_xFe_y-MOF/GO electrocatalyst. Besides, the water electrolyzed products were analysed by gas chromatography to get clear insights on the formed H₂ and O₂ products.     

Electrodeposition of Ni–Fe–Mn ternary nanosheets as affordable and efficient electrocatalyst for both hydrogen and oxygen evolution reactions

The synthesis of high performance and economical electrocatalysts in the process of overall water splitting is very important for the production of hydrogen energy and has become one of the most important challenges. Here, various Ni, Ni–Fe, Ni–Mn nanosheets and Ni–Fe–Mn ternary nanosheets were created using cost-effective, versatile and binder-free electrochemical deposition methods, and the electrocatalytic activity of various electrodes for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) were investigated in an alkaline environment. Due to the high electrochemical active surface area due to the fabrication of nanosheets, the synergistic effect between different elements on the electronic structure, the high wettability due to the formation of nanosheets and the quick detachment of formed gasses from the electrode, the Ni–Fe–Mn nanosheets electrode showed excellent electrocatalytic activity. In order to deliver the 10 mA cm⁻² current density in HER and OER processes, this electrode required values of 64 mV and 230 mV overpotential, respectively. Also, the stability test showed that after 10 h of electrolysis at a current density of 100 mA cm⁻², the overpotential changes was very small (less than 4%), indicating that the electrode was excellent electrostatic stability. Also, when using as a bi-functional electrode in the full water splitting system, it only needed a cell voltage of 1528 V to deliver a current of 10 mA cm⁻². The results of this study indicate a new strategy for the synthesis of active and stable electrocatalysts.