Performance and emission study on the effect of oxygenated additive in neat biodiesel fueled diesel engine

This work presents the effect of the Di-tetra-butyl-peroxide (DTBP) as an oxygenated additive on neat used mustard oil biodiesel (B100) to evaluate the emission and performance engine characteristics. Four fuels, namely, diesel, biodiesel (Mustard biodiesel), a blend of B100-10percentage, and 20% by volume of DTBP (BD90DTBP10 and BD80DTBP20) are prepared and tested on a single cylinder, constant speed diesel engine. Experimental outcomes revealed that 20% of DTBP reduces 7.3% CO, 5.1% HC, and 4.6% NOx and 3.2% smoke emissions of B100. From this study, further, it is inferred that BD80DTBP20 blend could be utilized as an alternative fuel for a CI engine with no modifications in engine design.     

Effect of nanoparticle on emission and performance characteristics of a diesel engine fueled with cashew nut shell biodiesel

High-rise in the air pollution levels due to combustion of the fossil fuel gives us the opportunity to discover environmentally friendly and clean fuels for the engines. Biodiesel originated from cashew nut shell oil through transesterification process can be blended or used as a neat fuel in unmodified engines. This work investigates the effect of alumina nanoparticles on emission and performance characteristics of cashew nut shell biodiesel. Neat cashew nut shell biodiesel prepared by conventional transesterification is termed as BD100 and biodiesel prepared by modified transesterification with the addition of alumina nanoparticles is termed as BD100A. Experimental results on unmodified diesel engine revealed that emission parameters such as CO, HC, NOx, and smoke were decreased by 5.3%, 7.4%, 10.23%, and 16.1% for BD100% and 8.8%, 10.1%, 12.4%, and 18.4% for B100A, respectively, compared to diesel fuel. At full load conditions, compared to diesel fuel, the BTE dropped by 1.1% and 2.3%, whereas the BSFC increased by 3.8% and 5.1% for B100A and B100 correspondingly.     

Assessment of energy performance and air pollutant emissions in a diesel engine generator fueled with water-containing ethanol–biodiesel–diesel blend of fuels

Biomass based oxygenated fuels have been identified as possible replacement of fossil fuel due to pollutant emission reduction and decrease in over-reliance on fossil fuel energy. In this study, 4 v% water-containing ethanol was mixed with (65–90%) diesel using (5–30%) biodiesel (BD) and 1 v% butanol as stabilizer and co-solvent respectively. The fuels were tested against those of biodiesel–diesel fuel blends to investigate the effect of addition of water-containing ethanol for their energy efficiencies and pollutant emissions in a diesel-fueled engine generator. Experimental results indicated that the fuel blend mix containing 4 v% of water-containing ethanol, 1 v% butanol and 5–30 v% of biodiesel yielded stable blends after 30 days standing. BD1041 blend of fuel, which composed of 10 v% biodiesel, 4 v% of water-containing ethanol and 1 v% butanol demonstrated −0.45 to 1.6% increase in brake-specific fuel consumption (BSFC, mL kW⁻¹ h⁻¹) as compared to conventional diesel. The better engine performance of BD1041 was as a result of complete combustion, and lower reaction temperature based on the water cooling effect, which reduced emissions to 2.8–6.0% for NO_x, 12.6–23.7% particulate matter (PM), 20.4–23.8% total polycyclic aromatic hydrocarbons (PAHs), and 30.8–42.9% total BaPeq between idle mode and 3.2 kW power output of the diesel engine generator. The study indicated that blending diesel with water-containing ethanol could achieve the goal of more green sustainability.     

非直喷式增压柴油机燃用生物柴油的性能与排放特性

研究了非直喷式增压柴油机燃用柴油一生物柴油混合燃料的性能和排放特性。未对原机作任何调整和改动,研究了不同生物柴油掺混比例的混合燃料对功率、油耗、烟度和NOx排放的影响。结果表明：非直喷式柴油机燃用生物柴油后柴油机功率略有下降,油耗有所上升,烟度大幅下降,NOx排放增加明显。油耗、烟度和NOx的变化均与生物柴油掺混比例呈线性关系,合适的生物柴油掺混比例即可以保持柴油机的性能,又可有效地降低碳烟排放,且不引起NOx排放的显著变化。对于该增压柴油机,掺混生物柴油对外特性下的排放影响最大,影响最小的为标定转速下的负荷特性。不论是全负荷还是部分负荷,燃用生物柴油时低速下的烟度降低和NOx上升幅度均比高速时大,而同转速下高负荷时烟度降低和NOx上升更为明显。     

The effect of biodiesel oxidation on engine performance and emissions

Biodiesel is an alternative fuel consisting of the alkyl monoesters of fatty acids from vegetable oils or animal fats. Previous research has shown that biodiesel-fueled engines produce less carbon monoxide, unburned hydrocarbons, and particulate emissions compared to diesel fuel. One drawback of biodiesel is that it is more prone to oxidation than petroleum-based diesel fuel. In its advanced stages, this oxidation can cause the fuel to become acidic and to form insoluble gums and sediments that can plug fuel filters. The objective of this study was to evaluate the impact of oxidized biodiesel on engine performance and emissions. A John Deere 4276T turbocharged DI diesel engine was fueled with oxidized and unoxidized biodiesel and the performance and emissions were compared with No. 2 diesel fuel. The neat biodiesels, 20% blends, and the base fuel (No. 2 diesel) were tested at two different loads (100 and 20%) and three injection timings (3° advanced, standard; 3° retarded). The tests were performed at steady-state conditions at a single engine speed of 1400 rpm. The engine performance of the neat biodiesels and their blends was similar to that of No. 2 diesel fuel with the same thermal efficiency, but higher fuel consumption. Compared with unoxidized biodiesel, oxidized neat biodiesel produced 15 and 16% lower exhaust carbon monoxide and hydrocarbons, respectively. No statistically significant difference was found between the oxides of nitrogen and smoke emissions from oxidized and unoxidized biodiesel.     

Effects of oxyhydrogen on the CI engine fueled with the biodiesel blends: A performance,combustion and emission characteristics study

The main purpose of this study is to analyse the effects of oxy hydrogen (HHO) along with the Moringa oleifera biodiesel blend on engine performance, combustion and emission characteristics. HHO gases were generated using the typical electrolysis process using the potassium hydroxide solution. The experiments were performed under various engine loads of 25%, 50%, 75%, and 100% in a constant speed engine. Biodiesel from the M. oleifera was prepared by the transesterification process. Further, the procured biodiesel blends mixed with neat diesel at the concentration of 20% (B20) and 40% (B40). In addition to above, the HHO gas flow rate to the engine chamber maintained at the flow rate of 0.5 L^-1. The use of the 20% and 40% blends with HHO reported less BTE compared to the neat diesel. However, B20 reported marginal rise in the BTE due to the addition of the HHO gas. On the other hand, addition of HHO gas to the blends significantly dropped the brake specific fuel consumption. With regard to the emissions, addition of the biodiesel blends reduced the concentration of the CO, HC, and CO₂. Nevertheless, no reduction reported in the formation of the NO. However, adding the HHO to the biodiesel reduced the average NOx by 6%, which is a substantial effect. Overall, HHO enriching biodiesel blends are the potential replacement for the existing fossil fuels for its superior fuel properties compared to the conventional diesel.     

Environment effect of La2O3 nano-additives on microalgae-biodiesel fueled CRDI engine with conventional diesel

In this present work, corn oil biodiesel with La₂O₃ was used as an additive with neat diesel fuel and blends were prepared. La₂O₃ nanoparticles are dispersed in the emulsions with different dosage levels of 50, 75, and 100 ppm. A single-cylinder, four-stroke CRDI diesel engine is made to run on different fuel concentrations to study the effect of emission characteristics of the fuel. The test engine was operated under constant engine speed (1500 rpm) and different engine load test conditions. According to the experimental results, fuel blends with biodiesel fuel emission increases CO₂ and NOx and reduces the CO, HC, and smoke emissions compared with the B20 fuel.     

Analysis of blended fuel properties and engine performance with palm biodiesel–diesel blended fuel

Depleting fossil fuel sources accompanied by continuously growing energy demands lead to increased interest in alternative energy sources. Blended biodiesel–diesel fuel has been approved as a commercial fuel at a low blending ratio. However, problems related to fuel properties are persistent at high blending ratios. Hence, in this study, the feasibility of biodiesel produced from palm oil was investigated. Characterization of blended fuel properties with increasing palm biodiesel ratio is conducted to evaluate engine performance test results. The qualifying of blended fuel properties was used to indicate the maximum blending ratio suitable for use in unmodified diesel engines according to the blended fuel standard ASTM D7467. The property test results revealed that blended fuel properties meet blended fuel standard requirements at up to 30% palm oil biodiesel. Furthermore, blending is efficient for reduction of the pour point from 14 °C for unblended biodiesel to less than 0 °C at a 30% biodiesel blending ratio. However, the energy content reduces by about 1.42% for each 10% increment of biodiesel. Engine test results demonstrated that there was no statistically significant difference for engine brake thermal efficiency among tested blended fuels compared to mineral diesel, and the lowest engine cyclic variation was achieved with blended fuel B30.     

Effect of changing injection pressure on Mahua oil and biodiesel combustion with CeO2 nanoparticle blend on CI engine performance and emission characteristics

Alternative fuels have sparked a lot of interest as oil deposits have decreased and environmental concerns have grown. Biodiesel is an alternative fuel that is being researched as a possible replacement for fossil fuels. In the current investigation, the combustion performance, and emission characteristics of CI(Compression Ignition) engine were examined by changing the fuel injection pressure (180, 200, 220 and 240 bar). The biodiesel (B20) used in this analysis was obtained from Mahua oil at 20% v/v blended with neat diesel (20% Mahua Biodiesel + 80% Diesel). CeO₂(Cerium Oxide) nanoparticles were introduced to the B20 fuel at four distinct concentrations are 25, 50, 75, and 100 ppm. Performance characteristics such as BTE(Brake Thermal Efficiency) and BSFC(Brake Specific Fuel Consumption) were inferior to diesel, at 240 bar B20 with 25 ppm CeO₂ indicated 1.9% increased BTE and 3.8% reduced BSFC compared B20 and 6% lower EGT (Exhaust Gas Temperature) compared diesel. At 200 bar, fuel samples indicated slightly higher In-Cylinder pressure and lower HRR (Heat release rate) compared to diesel. At 200 bar FIP(Fuel Injection Pressure), HC(Hydro Carbon) and CO(Carbon Monoxide) emissions were reduced significantly compared to diesel. The largest reduction in smoke opacity and NOx(Nitrous Oxide) emissions were observed at 240 bar with 75 ppm dosage, but CO₂(Carbon Dioxide) emissions were higher at 220 bar.     

6BTA 5.9 G2-1 Cummins engine performance and emission tests using methyl ester mahua (Madhuca indica) oil/diesel blends

Neat mahua oil poses some problems when subjected to prolonged usage in CI engine. The transesterification of mahua oil can reduce these problems. The use of biodiesel fuel as substitute for conventional petroleum fuel in heavy-duty diesel engine is receiving an increasing amount of attention. This interest is based on the properties of bio-diesel including the fact that it is produced from a renewable resource, its biodegradability and potential to exhaust emissions. A Cummins 6BTA 5.9 G2- 1, 158 HP rated power, turbocharged, DI, water cooled diesel engine was run on diesel, methyl ester of mahua oil and its blends at constant speed of 1500 rpm under variable load conditions. The volumetric blending ratios of biodiesel with conventional diesel fuel were set at 0, 20, 40, 60, and 100. Engine performance (brake specific fuel consumption, brake specific energy consumption, thermal efficiency and exhaust gas temperature) and emissions (CO, HC and NOx) were measured to evaluate and compute the behavior of the diesel engine running on biodiesel. The results indicate that with the increase of biodiesel in the blends CO, HC reduces significantly, fuel consumption and NOx emission of biodiesel increases slightly compared with diesel. Brake specific energy consumption decreases and thermal efficiency of engine slightly increases when operating on 20% biodiesel than that operating on diesel.     

An outcome of quaternary fuel blended Fe3O4-doped reduced graphene oxide nanocomposite on the diesel engine

The study includes the use of alcohols in conjunction with diesel as a binary fuel and biodiesel. In addition, this study was conducted on quaternary fuels (premium diesel, waste cooking biodiesel, n-butanol, and bioethanol), including Fe₃O₄ (iron(III) oxide)-doped reduced graphene oxide (rGO) nanocomposite to reduce the use of fossil fuels, their cost, and energy demand. It includes 10% bioethanol, 5%–20% n-butanol, 25 ppm Fe₃O₄-doped rGO nanocomposite, and 20% and 100% waste cooking biodiesel, all of which have been tested in a diesel engine to ensure that they are suitable for use. The findings were compared to those obtained with premium diesel, ranging from 50% to 100% at full engine load conditions. In comparison to 100% premium diesel fuel, the fuel blend (Blend G) had 37.50% brake thermal efficiency and 0.46% (brake-specific energy consumption), as well as lower rates of 316.2% carbon monoxide, 198.80% hydrocarbon, and 80.01% smoke with 28.10% higher oxides of nitrogen (NOx). Adding 20% n-butanol to premium diesel, as well as waste cooking biodiesel, bioethanol, and Fe₃O₄-doped rGO nanocomposite fuel blends, was used in this study to improve the performance of the diesel engine and reduce some of the NOx emissions. In the near future, these fuel blends may be a viable alternative combination for the diesel engine.     

Exhaust emission study on neat biodiesel and alcohol blends fueled diesel engine

In this study, neat biodiesel with octanol additive was employed in a diesel engine and its effects on engine emission were studied. The five fuels evaluated were neat palm kernal oil biodiesel, octanol blended with biodiesel by 10%, 20%, and 30% volume, and diesel. All the emissions are reduced by the addition of octanol in biodiesel in all loads owing to the higher oxygen concentration of air/fuel mixtures and improved atomization. Hence, it is concluded that the neat biodiesel and octanol blends can be employed as an alternative fuel for existing unmodified diesel engines owing to its lesser emission characteristics.     

Multi-objective optimization of diesel engine performance,vibration and emission parameters employing blends of biodiesel,hydrogen and cerium oxide nanoparticles with the aid of response surface methodology approach

Recent surges in crude oil prices have motivated researchers to find an alternative sustainable fuel called biodiesel from various inedible oils with lower carbo impact on the environment. The research is performed in diesel engine fuelled with blends of biodiesel coupled with cerium oxide nanoparticles and hydrogen content so as to optimize various factors which are responsible for performance, vibration and emission characteristics. Multi-objective optimization is achieved by employing RSM which also examines prime input parameters (engine load, nanoparticle concentration, compression ratio, hydrogen blend percentage and ignition pressure) responsible in varying engine characteristics. Henceforth, blends of Water Hyacinth can be successfully applied in diesel engine with lower environmental impact and enhanced cost effectiveness. Experimentation is performed on the central composite rotating design (CCRD) matrix with 5-level factor. Engine load was applied between 0 and 100%, NPC varied between 0 and 80 ppm, CR ranges between 17 and 19, hydrogen blend percentage varies between 0 and 40% and at a maximum injection pressure of 240 bar. Pareto-optimal conditions achieved for input conditions of 28.68% biofuel blend, 87.88 engine load, 80 ppm NPC, compression ratio of 19 and 194.54 bar infusion pressure were BTE, BSEC, NOx, UBHC and vibration reduction are 33.57%, 0.2550, 461.3002 ppm vol., and 28.08 ppm vol. And 22.21%, respectively.     

The effects of turbocharger on the performance and exhaust emissions of a diesel engine fuelled with biodiesel

This paper investigates the effects of turbocharger on the performance of a diesel engine using diesel fuel and biodiesel in terms of brake power, torque, brake specific consumption and thermal efficiency, as well as CO and NO_x emissions. For this aim, a naturally aspirated four-stroke direct injection diesel engine was tested with diesel fuel and neat biodiesel, which is rapeseed oil methyl ester, at full load conditions at the speeds between 1200 and 2400 rpm with intervals of 200 rpm. Then, a turbocharger system was installed on the engine and the tests were repeated for both fuel cases. The evaluation of experimental data showed that the brake thermal efficiency of biodiesel was slightly higher than that of diesel fuel in both naturally aspirated and turbocharged conditions, while biodiesel yielded slightly lower brake power and torque along with higher fuel consumption values. It was also observed that emissions of CO in the operations with biodiesel were lower than those in the operations with diesel fuel, whereas NO_x emission in biodiesel operation was higher. This study reveals that the use of biodiesel improves the performance parameters and decreases CO emissions of the turbocharged engine compared to diesel fuel.     

Effect of hydrogen enrichment and TiO2 nanoparticles on waste cooking palm biodiesel run CRDI engine

In this study, we deal with the production and utilization of waste-cooking palm biodiesel (WCB) and.evaluated the influence of the addition of titanium dioxide (TiO₂) nanoparticles in hydrogen-enriched single-cylinder CRDI diesel engine. XRD, SEM, and EDX decide the structure and morphology of TiO₂ nanoparticles. The TiO₂ nanoparticles were dispersed in the tested fuels at a dosage of 50–75 ppm with the aid of ultra-sonication. Based on the oxidation stability study, the B20 + 75 ppm (TiO₂) fuel blend is the pilot fuel for the engine test. Further, the engine is enriched with a hydrogen (H₂) flow of 10 lpm. Results revealed that the performance parameters were improved with the addition of H₂ enrichment and TiO₂ nanoparticles compared to D. The brake thermal efficiency of the engine was improved by 8.21%. In comparison, brake-specific fuel consumption decreased by 42.86%. Furthermore, adding nanoparticles also reduced CO and HC emissions by 74% and 27.27%, respectively, whereas the NO_x emission was slightly increased. Thus, the findings demonstrated that hydrogen-enriched nanoparticles added to biodiesel might be considered a substitute for fossil fuels and report a positive impact on diesel engine performance without requiring significant modifications.     

Comprehensive study of biodiesel fuel for HSDI engines in conventional and low temperature combustion conditions

In this research, an experimental investigation has been performed to give insight into the potential of biodiesel as an alternative fuel for High Speed Direct Injection (HSDI) diesel engines. The scope of this work has been broadened by comparing the combustion characteristics of diesel and biodiesel fuels in a wide range of engine loads and EGR conditions, including the high EGR rates expected for future diesel engines operating in the low temperature combustion (LTC) regime.The experimental work has been carried out in a single-cylinder engine running alternatively with diesel and biodiesel fuels. Conventional diesel fuel and neat biodiesel have been compared in terms of their combustion performance through a new methodology designed for isolating the actual effects of each fuel on diesel combustion, aside from their intrinsic differences in chemical composition.The analysis of the results has been sequentially divided into two progressive and complementary steps. Initially, the overall combustion performance of each fuel has been critically evaluated based on a set of parameters used as tracers of the combustion quality, such as the combustion duration or the indicated efficiency. With the knowledge obtained from this previous overview, the analysis focuses on the detailed influence of biodiesel on the different diesel combustion stages known ignition delay, premixed combustion and mixing controlled combustion, considering also the impact on CO and UHC pollutant emissions.The results of this research explain why the biodiesel fuel accelerates the diesel combustion process in all engine loads and EGR rates, even in those corresponding with LTC conditions, increasing its possibilities as alternative fuel for future DI diesel engines.     

Inhibition of NO emission by adding antioxidant mixture in Jatropha biodiesel on the performance and emission characteristics of a C.I. engine

In this paper, the effect of adding an antioxidant mixture in Jatropha biodiesel as fuel, in a single cylinder, direct injection compression ignition engine was experimentally investigated and the level of pollutants in the exhaust and performance characteristics of the engine were analyzed. Nine test fuels were prepared with three antioxidants, namely, Succinimide (C₄H₅NO₂), N,N-dimethyl-p-phenylenediamine-dihydrochloride (C₈H₁₄Cl₂N₂), and N-phenyl-p-phenylenediamine (C₆H₅NHC₆H₄NH₂) added to neat biodiesel at 500 parts per million (ppm), 1000 ppm and 2000 ppm and the observed experimental results were compared with those of neat biodiesel and neat diesel as base fuels. The comparison showed that NO emission was reduced drastically for the test fuels with the antioxidant addition of 2000 ppm. The maximum reduction of 10% of NO emission was observed for the antioxidant mixture in neat biodiesel, with a slight increase in unburned HC, CO and smoke opacity. In addition, the obtained experimental results reveal that the addition of two antioxidants as mixture in neat biodiesel caused improved NO emission reduction for all test fuels.     

Effect of induction on exhaust gas recirculation and hydrogen gas in compression ignition engine with simarouba oil in dual fuel mode

Biofuels extracted from non-edible oil is sustainable and can be used as an alternative fuel for internal combustion engines. This study presents the performance, emission and combustion characteristic analysis by using simarouba oil (obtained from Simarouba seed) as an alternative fuel along with hydrogen and exhaust gas recirculation (EGR) in a compression ignition (CI) engine operating on dual fuel mode. Simarouba biofuel blend (B20) was prepared on volumetric basis by mixing simarouba oil and diesel in the proportion of 20% and 80% (v/v), respectively. Hydrogen gas was introduced at the flow rate of 2.67 kg/min, and EGR concentration was maintained at 30% of total air introduction. Performance, combustion and emission characteristics analysis were examined with biodiesel (B20), biodiesel with hydrogen substitution and biodiesel, hydrogen with EGR and were compared with neat diesel operation. Results indicate that BTE of the engine operating with biodiesel B20 was decreased when compared to neat diesel operation. However, introducing hydrogen along with B20 blend into the combustion chamber shows a slight increase in the BTE by 1%. NO_x emission was increased to 18.13% with the introduction of hydrogen than that of base fuel (diesel) operation. With the introduction of EGR, there is a significant reduction in NO_x emission due to decrease in in-cylinder temperature by 19.07%. A significant reduction in CO, CO_2, and smoke emissions were also noted with the introduction of both hydrogen and EGR. The ignition delay and combustion duration were increased with the introduction of hydrogen, EGR with biodiesel than neat diesel operation. Hence, the proposed biodiesel B20 with H₂ and EGR combination can be applied as an alternative fuel in CI engines.     

Study of the oxidation stability and exhaust emission analysis of Moringa olifera biodiesel in a multi-cylinder diesel engine with aromatic amine antioxidants

In this study, the two most effective aromatic amine antioxidants N,N′-diphenyl-1,4-phenylenediamine (DPPD) and N-phenyl-1,4-phenylenediamine (NPPD), were used at a concentration of 2000 ppm. The impact of antioxidants on the oxidation stability, exhaust emission and engine performance of a multi-cylinder diesel engine fuelled with MB20 (20% Moringa oil methyl ester and 80% diesel fuel blend) were analysed at varying speed conditions at an interval of 500 rpm and a constant load. It was observed that, blending with diesel enhanced the oxidation stability of the moringa biodiesel by approximately 6.97 h, and the addition of DPPD and NPPD to MB20 increased the oxidation stability up to 34.5 and 18.4 h, respectively. The results also showed that the DPPD- and NPPD-treated blends reduced the NOx emission by 7.4% and 3.04%, respectively, compared to the untreated blend. However, they do have higher carbon monoxide (CO) and hydrocarbon (HC) levels and smoke opacities, but it should be noted that these emissions are still well below the diesel fuel emission level. The results show that the addition of antioxidant with MB20 also improves the engine's performance characteristics. Based on this study, MB20 blends with amine antioxidants can be used in diesel engines without any modification.     

压燃发动机燃用不同原料生物柴油的燃烧与排放特性

利用KIVA3数值模拟研究柴油以及三种生物柴油(大豆油甲酯、棕榈油甲酯、麻疯油甲酯)对压燃发动机燃烧和排放性能的影响。数值计算结果表明:生物柴油在燃烧初始阶段与柴油燃烧特性基本一致,燃烧中后期,生物柴油的平均缸温低于柴油,其中麻疯油甲酯最为明显;生物柴油碳烟和CO生成量明显低于柴油。生物柴油虽然缸内氧含量比柴油高,但由于受缸温的影响,NOx排放比柴油低,而麻疯油甲酯在三种生物柴油中NOx排放最低。