Enhancing hydrogen storage performance of MgH2 through the addition of BaMnO3 synthesized via solid-state method

Currently, magnesium hydride (MgH₂) as a solid-state hydrogen storage material has become the subject of major research owing to its good reversibility, large hydrogen storage capacity (7.6 wt%) and affordability. However, MgH₂ has a high decomposition temperature (>400 °C) and slow desorption and absorption kinetics. In this work, BaMnO₃ was synthesized using the solid-state method and was used as an additive to overcome the drawbacks of MgH₂. Interestingly, after adding 10 wt% of BaMnO₃, the initial desorption temperature of MgH₂ decreased to 282 °C, which was 138 °C lower than that of pure MgH₂ and 61 °C lower than that of milled MgH₂. For absorption kinetics, at 250 °C in 2 min, 10 wt% of BaMnO₃-doped MgH₂ absorbed 5.22 wt% of H₂ compared to milled MgH₂ (3.48 wt%). Conversely, the desorption kinetics also demonstrated that 10 wt% of BaMnO₃-doped MgH₂ samples desorbed 5.36 wt% of H₂ at 300 °C within 1 h whereas milled MgH₂ only released less than 0.32 wt% of H₂. The activation energy was lowered by 45 kJ/mol compared to that of MgH₂ after the addition of 10 wt% of BaMnO₃. Further analyzed by using XRD revealed that the formation of Mg_0·9Mn_0·1O, Mn₃O₄ and Ba or Ba-containing enhanced the performance of MgH₂.     

Synergistic effect of rGO supported Ni3Fe on hydrogen storage performance of MgH2

Bimetallic catalysts possess unique physical and chemical properties that distinct from the individual, which offer the opportunity to ameliorate the hydrogen storage properties of MgH₂. Herein, a Ni₃Fe catalyst homogeneously loaded on the surface of reduced graphene oxide (Ni₃Fe/rGO) was prepared based on layered double hydroxide (LDH) precursor. The novel Ni₃Fe/rGO nano-catalyst was subsequently doped into MgH₂ to improve its hydrogen storage performance. The MgH₂-5 wt.% Ni₃Fe/rGO composite requires only 100 s to reach 6 wt% hydrogen capacity at 100 °C, while for MgH₂ doped with 5 wt% Ni₃Fe, Ni/rGO and Fe/rGO all require more than 500 s to uptake 3 wt% hydrogen under the same condition. The onset dehydrogenation temperature of the MgH₂-5 wt.% Ni₃Fe/rGO composite is about 185 °C, much lower than that of the MgH₂ doped with 5 wt% Ni₃Fe (205 °C), Ni/rGO (210 °C) and Fe/rGO (250 °C), and it can release H₂ completely even in 1000 s at 275 °C. Besides, the MgH₂-5 wt% Ni₃Fe/rGO displays the lowest dehydrogenation apparent activation energy of 59.3 kJ/mol calculated by Kissinger equation. The synergetic effect attributing to rGO, in-situ formed active species of Mg₂Ni and Fe is in charge of the excellent catalytic effect on hydrogen storage behavior of MgH₂. Meanwhile, this study supplies innovative insights to design high efficiency catalysts based on the LDH precursor.     

Catalysis derived from flower-like Ni MOF towards the hydrogen storage performance of magnesium hydride

Herein, a novel flower-like Ni MOF with good thermostability is introduced into MgH₂ for the first time, and which demonstrates excellent catalytic activity on improving hydrogen storage performance of MgH₂. The peak dehydrogenation temperature of MgH₂-5 wt.% Ni MOF is 78 °C lower than that of pure MgH₂. Besides, MgH₂-5 wt.% Ni MOF shows faster de/hydrogenation kinetics, releasing 6.4 wt% hydrogen at 300 °C within 600 s and restoring about 5.7 wt% hydrogen at 150 °C after dehydrogenation. The apparent activation energy for de/hydrogenation reactions are calculated to be 107.8 and 42.8 kJ/mol H₂ respectively, which are much lower than that of MgH₂ doped with other MOFs. In addition, the catalytic mechanism of flower-like Ni MOF is investigated in depth, through XRD, XPS and TEM methods. The high catalytic activity of flower-like Ni MOF can be attributed to the combining effect of in-situ generated Mg₂Ni/Mg₂NiH₄, MgO nanoparticles, amorphous C and remaining layered Ni MOF. This research extends the knowledge of elaborating efficient catalysts via MOFs in hydrogen storage materials.     

Synthesis of low-cost biomass charcoal-based Ni nanocatalyst and evaluation of their kinetic enhancement of MgH2

In this study, a low-cost biomass charcoal (BC)-based nickel catalyst (Ni/BC) was introduced into the MgH₂ system by ball-milling. The study demonstrated that the Ni/BC catalyst significantly improved the hydrogen desorption and absorption kinetics of MgH₂. The MgH₂ + 10 wt% Ni/BC-3 composite starts to release hydrogen at 187.8 °C, which is 162.2 °C lower than the initial dehydrogenation temperature of pure MgH₂. Besides, 6.04 wt% dehydrogenation can be achieved within 3.5 min at 300 °C. After the dehydrogenation is completed, MgH₂ + 10 wt% Ni/BC-3 can start to absorb hydrogen even at 30 °C, which achieved the absorption of 5 wt% H₂ in 60 min under the condition of 3 MPa hydrogen pressure and 125 °C. The apparent activation energies of dehydrogenation and hydrogen absorption of MgH₂ + 10 wt% Ni/BC-3 composites were 82.49 kJ/mol and 23.87 kJ/mol lower than those of pure MgH₂, respectively, which indicated that the carbon layer wrapped around MgH₂ effectively improved the cycle stability of hydrogen storage materials. Moreover, MgH₂ + 10 wt% Ni/BC-3 can still maintain 99% hydrogen storage capacity after 20 cycles. XRD, EDS, SEM and TEM revealed that the Ni/BC catalyst evenly distributed around MgH₂ formed Mg₂Ni/Mg₂NiH₄ in situ, which act as a “hydrogen pump” to boost the diffusion of hydrogen along with the Mg/MgH₂ interface. Meanwhile, the carbon layer with fantastic conductivity enormously accelerated the electron transfer. Consequently, there is no denying that the synergistic effect extremely facilitated the hydrogen absorption and desorption kinetic performance of MgH₂.     

Enhancing hydrogen storage properties of the Mg/MgH2 system by the addition of bis(tricyclohexylphosphine)nickel(II) dichloride

This is a first report on the use of the bis(tricyclohexylphosphine)nickel (II) dichloride complex (abbreviated as NiPCy3) into MgH₂ based hydrogen storage systems. Different composites were prepared by planetary ball-milling by doping MgH₂ with (i) free tricyclohexylphosphine (PCy3) without or with nickel nanoparticles, (ii) different NiPCy3 contents (5–20 wt%) and (iii) nickel and iron nanoparticles with/without NiPCy3. The microstructural characterization of these composites before/after dehydrogenation was performed by TGA, XRD, NMR and SEM-EDX. Their hydrogen absorption/desorption kinetics were measured by TPD, DSC and PCT. All MgH₂ composites showed much better dehydrogenation properties than the pure ball-milled MgH₂. The hydrogen absorption/release kinetics of the Mg/MgH₂ system were significantly enhanced by doping with only 5 wt% of NiPCy3 (0.42 wt% Ni); the mixture desorbed H₂ starting at 220 °C and absorbed 6.2 wt% of H₂ in 5 min at 200 °C under 30 bars of hydrogen. This remarkable storage performance was not preserved upon cycling due to the complex decomposition during the dehydrogenation process. The hydrogen storage properties of NiPCy3-MgH₂ were improved and stabilized by the addition of Ni and Fe nanoparticles. The formed system released hydrogen at temperatures below 200 °C, absorbed 4 wt% of H₂ in less than 5 min at 100 °C, and presented good reversible hydriding/dehydriding cycles. A study of the different storage systems leads to the conclusion that the NiPCy3 complex acts by restricting the crystal size growth of Mg/MgH₂, catalyzing the H₂ release, and homogeneously dispersing nickel over the Mg/MgH₂ surface.     

CNTs decorated with CoFeB as a dopant to remarkably improve the dehydrogenation/rehydrogenation performance and cyclic stability of MgH2

The chain-like carbon nanotubes (CNTs) decorated with CoFeB (CoFeB/CNTs) prepared by oxidation-reduction method is introduced into MgH₂ to facilitate its hydrogen storage performance. The addition of CoFeB/CNTs enables MgH₂ to start desorbing hydrogen at only 177 °C. Whereas pure MgH₂ starts hydrogen desorption at 310 °C. The dehydrogenation apparent activation energy of MgH₂ in CoFeB/CNTs doped-MgH₂ composite is only 83.2 kJ/mol, and this is about 59.5 kJ/mol lower than that of pure MgH₂. In addition, the completely dehydrogenated MgH₂−10 wt% CoFeB/CNTs sample can start to absorb hydrogen at only 30 °C. At 150 °C and 5 MPa H₂, the MgH₂ in CoFeB/CNTs doped-MgH₂ composite can absorb 6.2 wt% H₂ in 10 min. The cycling kinetics can remain rather stable up to 20 cycles, and the hydrogen storage capacity retention rate is 98.5%. The in situ formation of Co₃MgC, Fe, CoFe and B caused by the introduction of CoFeB/CNTs can provide active and nucleation sites for the dehydrogenation/rehydrogenation reactions of MgH₂. Moreover, CNTs can provide hydrogen diffusion pathways while also enhancing the thermal conductivity of the sample. All of these can facilitate the dehydrogenation/rehydrogenation performance and cyclic stability of MgH₂.     

Dual-cation K2TaF7 catalyst improves high-capacity hydrogen storage behavior of MgH2

MgH₂ has been extensively regarded as a low-cost hydrogen storage material with high gravimetric hydrogen capacity of approximately 7.6 wt%. However, the hydrogen release and absorption kinetics in MgH₂ still needs further improving. For the first time, the catalytic impacts of a new dual-cation metal fluoride K₂TaF₇ upon the hydrogen storage characteristics of MgH₂ have been investigated in this work. With only 1 wt% K₂TaF₇ dopant, the initial dehydrogenation temperature of MgH₂ was lowered by about 130 °C, releasing more than 7.3 wt% hydrogen totally. The desorption activation energy of MgH₂ + 1 wt% K₂TaF₇ composite was decreased to 107.2 ± 1.2 kJ mol^?1. Besides, at 190 °C, the dehydrogenated MgH₂ + 1 wt% K₂TaF₇ sample could absorb 6.56 wt% H₂, while pristine MgH₂ re-absorbed only 3.45 wt% H₂. Further studies revealed that K₂TaF₇ could react with MgH₂ during dehydrogenation and produce symbiotic hydrides KMgH₃ and TaH_0.8, which could play the role of hydrogen pumps during hydrogen release and uptake. The cooperative catalysis between the hydrogen pump effect and the active interface in the multi-hydride area significantly enhanced the reversible hydrogen storage in the MgH₂+1 wt% K₂TaF₇ composite. This study provides new thinking for novel catalysts to elevate the hydrogen storage performance of MgH₂.     

Facile synthesized Fe nanosheets as superior active catalyst for hydrogen storage in MgH2

Reversible hydrogen storage in MgH₂ under mild conditions is a promising way for the realization of “Hydrogen Economy”, in which the development of cheap and highly efficient catalysts is the major challenge. Herein, A two-dimensional layered Fe is prepared via a facile wet-chemical ball milling method and has been confirmed to greatly enhance the hydrogen storage performance of MgH₂. Minor addition of 5 wt% Fe nanosheets to MgH₂ decreases the onset desorption temperature to 182.1 °C and enables a quick release of 5.44 wt% H₂ within 10 min at 300 °C. Besides, the dehydrogenated sample takes up 6 wt% H₂ in 10 min under a hydrogen pressure of 3.2 MPa at 200 °C. With the doping of Fe nanosheets, the apparent activation energy of the dehydrogenation reaction for MgH₂ is reduced to 40.7 ± 1.0 kJ mol⁻¹. Further ab initio calculations reveal that the presence of Fe extends the Mg–H bond length and reduces its bond strength. We believe that this work would shed light on designing plain metal for catalysis in the area of hydrogen storage and other energy-related issues.     

Enhanced hydrogen-storage properties of MgH2 by Fe–Ni catalyst modified three-dimensional graphene

High dehydrogenation temperature and slow dehydrogenation kinetics impede the practical application of magnesium hydride (MgH₂) serving as a potential hydrogen storage medium. In this paper, Fe–Ni catalyst modified three-dimensional graphene was added to MgH₂ by ball milling to optimize the hydrogen storage performance, the impacts and mechanisms of which are systematically investigated based on the thermodynamic and kinetic analysis. The MgH₂+10 wt%Fe–Ni@3DG composite system can absorb 6.35 wt% within 100 s (300 °C, 50 atm H₂ pressure) and release 5.13 wt% within 500 s (300 °C, 0.5 atm H₂ pressure). In addition, it can absorb 6.5 wt% and release 5.7 wt% within 10 min during 7 cycles, exhibiting excellent cycle stability without degradation. The absorption-desorption mechanism of MgH₂ can be changed by the synergistic effects of the two catalyst materials, which significantly promotes the improvement of kinetic performance of dehydrogenation process and reduces the hydrogen desorption temperature.     

Remarkable synergistic effects of Mg2NiH4 and transition metal carbides (TiC,ZrC, WC) on enhancing the hydrogen storage properties of MgH2

Nanostructuring and catalyzing are effective methods for improving the hydrogen storage properties of MgH₂. In this work, transition-metal-carbides (TiC, ZrC and WC) are introduced into Mg–Ni alloy to enhance its hydrogen storage performance. 5 wt% transition-metal-carbide containing Mg₉₅Ni₅ (atomic ratio) nanocomposites are prepared by mechanical milling pretreatment followed by hydriding combustion synthesis and mechanical milling process, and the synergetic enhancement effects of Mg₂NiH₄ and transition-metal-carbides are investigated systematically. Due to the inductive effect of Mg₂NiH₄ and charge transfer effect between Mg/MgH₂ and transition-metal-carbides, Mg₉₅Ni₅-5 wt.% transition-metal-carbide samples all exhibit excellent hydrogen storage kinetic at moderate temperature and start to release hydrogen around 216 °C. Among them, 2.5 wt% H₂ (220 °C) and 4.7 wt% H₂ (250 °C) can be released from the Mg₉₅Ni₅-5 wt.% TiC sample within 1800 s. The unique mosaic structure endows the Mg₉₅Ni₅-5 wt.% TiC with excellent structural stability, thus can reach 95% of saturated hydrogen capacity within 120 s even after 10 cycles of de-/hydrogenation at 275 °C. And the probable synergistic enhancement mechanism for hydrogenation and dehydrogenation is proposed.     

Improved hydrogen storage properties of Mg/MgH2 thanks to the addition of nickel hydride complex precursors

In order to improve the hydrogenation/dehydrogenation properties of the Mg/MgH₂ system, the nickel hydride complex NiHCl(P(C₆H₁₁)₃)₂ has been added in different amounts to MgH₂ by planetary ball milling. The hydrogen storage properties of the formed composites were studied by different thermal analyses methods (temperature programmed desorption, calorimetric and pressure-composition-temperature analyses). The optimal amount of the nickel complex precursor was found to be of 20 wt%. It allows to homogeneously disperse 1.8 wt% of nickel active species at the surface of the Mg/MgH₂ particles. After the decomposition of the complex during MgH₂ dehydrogenation, the formed composite is stable upon cycling at low temperature. It can release hydrogen at 200 °C and absorb 6.3 wt% of H₂ at 100 °C in less than 1 h. The significantly enhanced H₂ storage properties are due to the impact of the highly dispersed nickel on both the kinetics and thermodynamics of the Mg/MgH₂ system. The hydrogenation and dehydrogenation enthalpies were found to be of −65 and 63 kJ/mol H₂ respectively (±75 kJ/mol H₂ for pure Mg/MgH₂) and the calculated apparent activation energies of the hydrogen uptake and release processes are of 22 and 127 kJ/mol H₂ respectively (88 and 176 kJ/mol H₂ for pure Mg/MgH₂). The change in the thermodynamics observed in the formed composite is likely to be due to the formation of a Mg_0.992Ni_0.008 phase during dehydrogenation/hydrogenation cycling. The impact of another hydride nickel precursor in which chloride has been replaced by a borohydride ligand, namely NiH(BH₄)(P(C₆H₁₁)₃)₂, is also reported.     

Remarkable kinetics of novel Ni@CeO2–MgH2 hydrogen storage composite

Magnesium hydroxide (MgH₂) has excellent reversibility and high capacity, and is one of the most promising materials for hydrogen storage in practical applications. However, it suffers from high dehydrogenation temperature and slow sorption kinetics. Rare earth hydrides and transition metals can both significantly improve the de/hydrogenation kinetics of MgH₂. In this work, MgH₂–Mg₂NiH₄–CeH_2.73 is in-situ synthesized by introducing Ni@CeO₂ into MgH₂. The unique coating structure of Ni@CeO₂ facilitates homogeneous distribution of synergetic CeH_2.73 and Mg₂NiH₄ catalytic sites in subsequent ball milling process. The as-fabricated composite MgH₂-10 wt% Ni@CeO₂ powders possess superior hydrogenation/dehydrogenation characteristics, absorbing 4.1 wt% hydrogen within 60 min at 100 °C and releasing 5.44 wt% H₂ within 10 min at 350 °C. The apparent activation energy of MgH₂-10 wt% Ni@CeO₂ is determined to be 84.8 kJ/mol and it has favorable hydrogen cycling stability with almost no decay in capacity after 10 cycles.     

Graphene-anchored Ni6MnO8 nanoparticles with steady catalytic action to accelerate the hydrogen storage kinetics of MgH2

Transition metal-based oxides have been proven to have a substantial catalytic influence on boosting the hydrogen sorption performance of MgH₂. Herein, the catalytic action of Ni₆MnO₈@rGO nanocomposite in accelerating the hydrogen sorption properties of MgH₂ was investigated. The MgH₂ + 5 wt% Ni₆MnO₈@rGO composites began delivering H₂ at 218 °C, with about 2.7 wt%, 5.4 wt%, and 6.6 wt% H₂ released within 10 min at 265 °C, 275 °C, and 300 °C, respectively. For isothermal hydrogenation at 75 °C and 100 °C, the dehydrogenated MgH₂ + 5 wt% Ni₆MnO₈@rGO sample could absorb 1.0 wt% and 3.3 wt% H₂ in 30 min, respectively. Moreover, as compared to addition-free MgH₂, the de/rehydrogenation activation energies for doped MgH₂ composites were lowered to 115 ± 11 kJ/mol and 38 ± 7 kJ/mol, and remarkable cyclic stability was reported after 20 cycles. Microstructure analysis revealed that the in-situ formed Mg₂Ni/Mg₂NiH₄, Mn, MnO₂, and reduced graphene oxide synergically enhanced the hydrogen de/absorption properties of the Mg/MgH₂ system.     

Improved hydrogen storage characteristics of magnesium hydride using dual auto catalysts (MgF2+CsH)

This study discusses the improvement in the hydrogen sorption properties of MgH₂ with dual auto-catalysts, MgF₂ and CsH. The auto-catalysts are formed due to the reaction between MgH₂ and CsF during the dehydrogenation reaction of MgH₂. It has been observed that MgF₂ and CsH not only improve MgH₂'s hydrogen sorption properties, also aids its positive thermodynamic tuning, which is favourable for hydrogen storage. The on-set desorption temperature of MgH₂ catalysed by MgF₂+CsH is 249 °C, which is 106 °C lower than that of ball-milled MgH₂ without any additives measured under identical measurement conditions. The catalysts helped in improving both the de/rehydrogenation kinetics of MgH₂. The MgH₂ catalysed by MgF₂+CsH released 4.73 wt % H₂ in 15 min at 300 °C. Furthermore, its initial re-hydrogenation rate under isothermal conditon at 300 °C is 4.62 wt % H₂ in 5 min. The catalysed sample exhibits negligible hydrogen storage degradation of 0.39 wt % H₂ after 25 de/re-hydrogenation cycles. Using the Kissinger method, the activation energy of MgH₂ catalysed by MgF₂+CsH was estimated to be 98.1 ± 0.5 kJmol^-1. From the Van't Hoff plot, the decomposition and formation enthalpies of MgH₂ were determined to be 66.6 ± 1.1 kJmol^-1 and 63.1 ± 1.2 kJmol^-1, respectively. From the experimental observation, a feasible mechanism for the de/re-hydrogenation behaviour of MgH₂ with MgF₂+CsH is proposed.     

The enhanced de/re‐hydrogenation performance of MgH2 with TiH2 additive

Catalytic effects of TiH₂ on hydrogenation/dehydrogenation kinetics of MgH₂ were investigated in this study. The TG analysis showed that the addition of the x wt% TiH₂ exhibited lower onset temperature of 160°C which is 100°C and 190°C lower than as‐milled and as‐received MgH₂. The dehydrogenation and hydrogenation kinetics were significantly improved compared with the pure MgH₂. The activation energy for the hydrogen desorption of MgH₂ was reduced from ?137.13 to ?77.58 kJ/mol by the addition of TiH₂. XRD and XPS results showed that the phase of TiH₂ remained same during the dehydrogenation without any intermediate formation confirming its role as catalyst.     

Enhanced hydrogen properties of MgH2 by Fe nanoparticles loaded hollow carbon spheres

In the present investigation, we have reported the synergistic effect of Fe nanoparticles and hollow carbon spheres composite on the hydrogen storage properties of MgH₂. The onset desorption temperature for MgH₂ catalyzed with hollow carbon spheres and Fe nanoparticle (MgH₂-Fe-HCS) system has been observed to be 225.9 °C with a hydrogen storage capacity of 5.60 wt %. It could be able to absorb 5.60 wt % hydrogen within 55 s and desorb 5.50 wt % hydrogen within 12 min under 20 atm H₂ pressure at 300 °C. The desorption activation energy of MgH₂-Fe-HCS has been found to be 84.9 kJ/mol, whereas the desorption activation energies for as received MgH₂, Hollow carbon sphere catalyzed MgH₂ and Fe catalyzed MgH₂ are found to be 130 kJ/mol, 103 kJ/mol, and 94.2 kJ/mol respectively. MgH₂-Fe-HCS composite lowered the change in enthalpy of hydrogen desorption from MgH₂ by 20.02 kJ/mol as compared to pristine MgH₂. MgH₂-Fe-HCS shows better cyclability up to 24 cycles of hydrogenation and dehydrogenation of MgH₂. The mechanism for the better catalytic action of Fe and HCS on MgH₂ has also been discussed.     

Superior hydrogen storage properties of MgH2–10 wt.% TiC composite

The hydrogen storage performance of MgH₂–10 wt.% TiC composite was investigated. The additive TiC nanoparticle led to a pronounced improvement in the de/hydrogenation kinetics of MgH₂. The composite could dehydrogenate 6.3 wt.% at 573 K while the milled MgH₂ only released 4.9 wt.% of hydrogen at the same condition. The improvement came from that the activation energy of dehydrogenation was decreased from 191.27 kJ mol⁻¹ to 144.62 kJ mol⁻¹ with the TiC additive. The MgH₂–10 wt.% TiC composite also absorbed 6.01 wt.% (or 5.1 wt.%) of hydrogen under 1 MPa H₂ at 573 K (or 473 K) in 3000 s. Even at 1 MPa H₂ and 373 K, it could absorb 4.1 wt.% of hydrogen, but milled MgH₂ could not absorb hydrogen at this condition. Additionally, the composite had good cycling stability, and its hydrogen capacity only decreased 3.3% of the first run after 10 de/hydrogenation cycles. The improved hydrogen storage properties were explained to the TiC particles embedded in the MgH₂, which provided the pathways for the hydrogen diffusion into the MgH₂–10 wt.% TiC composite.     

200 NL H2 hydrogen storage tank using MgH2–TiH2–C nanocomposite as H storage material

MgH₂-based hydrogen storage materials are promising candidates for solid-state hydrogen storage allowing efficient thermal management in energy systems integrating metal hydride hydrogen store with a solid oxide fuel cell (SOFC) providing dissipated heat at temperatures between 400 and 600 °C. Recently, we have shown that graphite-modified composite of TiH₂ and MgH₂ prepared by high-energy reactive ball milling in hydrogen (HRBM), demonstrates a high reversible gravimetric H storage capacity exceeding 5 wt % H, fast hydrogenation/dehydrogenation kinetics and excellent cycle stability. In present study, 0.9 MgH₂ + 0.1 TiH₂ +5 wt %C nanocomposite with a maximum hydrogen storage capacity of 6.3 wt% H was prepared by HRBM preceded by a short homogenizing pre-milling in inert gas. 300 g of the composite was loaded into a storage tank accommodating an air-heated stainless steel metal hydride (MH) container equipped with transversal internal (copper) and external (aluminium) fins. Tests of the tank were carried out in a temperature range from 150 °C (H₂ absorption) to 370 °C (H₂ desorption) and showed its ability to deliver up to 185 NL H₂ corresponding to a reversible H storage capacity of the MH material of appr. 5 wt% H. No significant deterioration of the reversible H storage capacity was observed during 20 heating/cooling H₂ discharge/charge cycles. It was found that H₂ desorption performance can be tailored by selecting appropriate thermal management conditions and an optimal operational regime has been proposed.     

Synergetic effect of reactive ball milling and cold pressing on enhancing the hydrogen storage behavior of nanocomposite MgH2/10 wt% TiMn2 binary system

Intermetallic TiMn₂ compound was employed for improving the de/rehydrogenation kinetics behaviors of MgH₂ powders. The metal hydride powders, obtained after 200 h of reactive ball milling was doped with 10 wt% TiMn₂ powders and high-energy ball milled under pressurized hydrogen of 70 bar for 50 h. The cold-pressing technique was used to consolidate them into 36-green buttons with 12 mm in diameter. During consolidation, the hard TiMn₂ spherical powders deeply embedded into MgH₂ matrix to form homogeneous nanocomposite bulk material. The apparent activation energies of hydrogenation and dehydrogenation for the fabricated buttons were 19.3 kJ/mol and 82.9 kJ/mol, respectively. The present MgH₂/10 wt% TiMn₂ nanocomposite binary system possessed superior hydrogenation/dehydrogenation kinetics at 225 °C to absorb/desorb 5.1 wt% hydrogen at 10 bar/200 mbar H₂ within 100 s and 400 s, respectively. This new system revealed good cyclability of achieving 414 cycles within 600 h continuously without degradations. For the present study, the consolidated buttons were used as solid-state hydrogen storage for feeding proton-exchange membrane fuel cell through a house made Ti-reactor at 250 °C. This nanocomposite system possessed good capability for providing the fuel cell with hydrogen flow at an average rate of 150 ml/min. The average current and voltage outputs were 3 A and 5.5 V, respectively.     

Enhanced hydrogen desorption/absorption properties of magnesium hydride with CeF3@Gn

In order to improve the hydrogen storage performance of MgH₂, graphene and CeF₃ co-catalyzed MgH₂ (hereafter denoted as MgH₂+CeF₃@Gn) were prepared by wet method ball milling and hydriding, which is a simple and time-saving method. The effect of CeF₃@Gn on the hydrogen storage behavior of MgH₂ was investigated. The experimental results showed that co-addition of CeF₃@Gn greatly decreased the hydrogen desorption/absorption temperature of MgH₂, and remarkably improved the dehydriding/hydriding kinetics of MgH₂. The onset hydrogen desorption temperature of Mg + CeF₃@Gn is 232 °C，which is 86 °C lower than that of as-milled undoped MgH₂, and its hydrogen desorption capacity reaches 6.77 wt%, which is 99% of its theoretical capacity (6.84 wt%). At 300 °C and 200 °C the maximum hydrogen desorption rates are 79.5 and 118 times faster than that of the as-milled undoped MgH₂. Even at low temperature of 150 °C, the dedydrided sample (Mg + CeF₃@Gn) also showed excellent hydrogen absorption kinetics, it can absorb 5.71 wt% hydrogen within 50 s, and its maximum hydrogen absorption rate reached 15.0 wt% H₂/min, which is 1765 times faster than that of the undoped Mg. Moreover, no eminent degradation of hydrogen storage capacity occurred after 15 hydrogen desorption/absorption cycles. Mg + CeF₃@Gn showed excellent hydrogen de/absorption kinetics because of the MgF₂ and CeH_2-3 that are formed in situ, and the synergic catalytic effect of these by-products and unique structure of Gn.