Enhanced electrocatalytic performance for methanol oxidation of a novel Pt-dispersed poly(3,4-ethylenedioxythiophene)–poly(styrene sulfonic acid) electrode

A new catalyst electrode was prepared in which Pt particles were homogeneously distributed into a poly(3,4-ethylenedioxythiophene)–poly(styrene sulfonic acid) (PEDOT–PSS) matrix. Catalytic activity and stability for the oxidation of methanol were studied by using cyclic voltammetry and chronoamperometry. For comparative purposes, bulk Pt and PEDOT–PSS based electrodes were fabricated and tested. Enhanced electrocatalytic activity toward the oxidation of methanol was noticed when Pt particles were embedded into the PEDOT–PSS matrix. A high catalytic current for methanol oxidation (2.51 mA cm⁻²) was found for the PEDOT–PSS–Pt electrode in comparison to bulk Pt electrode (0.45 mA cm⁻²) at +0.6 V (versus Ag/AgCl). The enhanced electrocatalytic activity might be due to the dispersion of Pt particles into the PEDOT–PSS matrix and the synergistic effects between the dispersed Pt particles and the PEDOT–PSS matrix. The morphology and crystalline behavior of PEDOT–PSS–Pt and simple ITO/Pt films were determined by X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM) and correlated with the enhanced electrocatalytic activity for the Pt-dispersed PEDOT–PSS electrode.     

Extraordinarily high hydrogen-evolution-reaction activity of corrugated graphene nanosheets derived from biomass rice husks

The metal-free carbonaceous catalysts are one of the promising candidates for efficient electrocatalytic hydrogen production. Aiming at demonstrating the high electrocatalytic activity of the hydrogen evolution reaction (HER), we synthesized the biomass rice husk-derived corrugated graphene (RH-CG) nanosheets via the KOH activation. The 700 °C-activated RH-CG nanosheets exhibited the large specific surface area as well as the high electrical conductivity. When using the RH-CG nanosheets as a HER electrocatalyst in 0.5 M H₂SO₄, the excellent HER activities with a small overpotential (9 mV at 10 mA/cm²) and a small Tafel slope (31 mV/dec) were achieved. The results provide a new strategy for materializing the superb biomass-derived electrocatalyst for highly efficient hydrogen production.     

Nanoengineered Zn-modified Nickel Sulfide (NiS) as a bifunctional electrocatalyst for overall water splitting

Developing an efficient and inexpensive electrocatalyst is of paramount importance for realizing the green hydrogen economy through electrocatalytic water splitting. Here, we demonstrated a facile large-scale, industrially viable binder-free synthesis of Zn-doped NiS electrocatalyst on bare nickel foam (NF) through a hydrothermal technique. The present catalyst, i.e., nickel sulfide (NiS) nanosheets on nickel foam with optimized doping of Zn atom (Zn–NiS-3), displays excellent catalytic efficacy for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). It requires an overpotential of 320 mV for OER at a current density of 50 mA cm⁻² and an overpotential of 208 mV for HER at a current density of 10 mA cm⁻². The water electrolyser device having Zn–NiS-3 electrocatalyst as both cathode and anode show excellent performance, requiring a cell voltage of only 1.71 V to reach a current density of 10 mA cm⁻² in an alkaline media. The density functional theory (DFT) based calculations showed enhanced density of states near Fermi energy after Zn doping in NiS and attributed to the enhanced catalytic activities. Thus, the present study demonstrates that Zn–NiS-3@NF can be coined as a viable electrocatalyst for green hydrogen production.     

Engineering of molybdenum sulfide nanostructures towards efficient electrocatalytic hydrogen evolution

Water splitting is an appealing way of producing hydrogen fuel, which requires efficient and affordable electrode materials to make the overall process viable. In the last couple years, abundant transition metals (and their compounds and hybrids) attracted ever-growing attention as the alternatives of noble metals. Particularly the layered transition metal dichalcogenide (TMDs) are interesting with their stability and promising electrocatalytic performance for hydrogen evolution reaction (HER). However, the neat TMDs are often poor in terms of the abundance of catalytically active sites and electrical conductivity, which limit their application potential significantly. Herein, as a proof-of-concept, we report on the design of a high-performance electrocatalyst system formed by the decoration of ultrasmall molybdenum sulfide (MoS₂) nanosheets on carbon nanotubes (CNTs). The ultrasmall MoS₂ nanosheets provide distorted lattice, confined size and rich defects, which endows the resulting electrocatalysts (MoS₂/CNT) with abundant active sites. The CNTs, on the other hand, serve as the conductive net for ensuring electrocatalytic performance. As a result, the hybrid electrocatalyst exhibits excellent electrocatalytic performance for HER, achieving a large current density of 100 mA cm⁻² at overpotential of only 281 mV and a small Tafel slope of 43.6 mV dec⁻¹ along with a decent stability. Our results are of high interest for electrocatalyst technologists as well as hydrogen fuel researchers.     

Accelerated oxygen evolution kinetics on NiFeAl-layered double hydroxide electrocatalysts with defect sites prepared by electrodeposition

NiFe layered double hydroxides (LDHs) is considered to be one of the LDHs electrocatalyst materials with the best electrocatalytic oxygen evolution properties. However, its poor conductivity and inherently poor electrocatalytic activity are considered to be the limiting factors inhibiting the electrocatalytic properties for oxygen evolution reaction (OER). The amorphous NiFeAl-LDHs electrocatalysts were prepared by electrodeposition with nickel foam as the support, and the D-NiFeAl-LDHs electrocatalyst with defect sites was then obtained by alkali etching. The mechanism of catalysts with defect sites in OER was analyzed. The ingenious defects can selectively accelerate the adsorption of OH⁻, thus enhancing the electrochemical activity. The D-NiFeAl-LDHs electrocatalyst had higher OER electrocatalytic activity than NiFe-LDHs electrocatalyst: its accelerated OER kinetics were mainly due to the introduction of iron and nickel defects in NiFeAl-LDHs nanosheets, which effectively adjusted the surface electronic structure and improved OER electrocatalytic performance. There was only a low overpotential of 262 mV with the current density of 10 mA cm⁻², and the Tafel slope was as low as 41.67 mV dec⁻¹. The OER electrocatalytic performance of D-NiFeAl-LDHs was even better than those of most of the reported NiFe-LDHs electrocatalysts.     

Facile synthesis of molybdenum-based layered double hydroxide nanorods for boosting water oxidation reaction

Exploiting environmentally friendly and robust oxygen evolution reaction (OER) electrodes is still a great difficulty to promote the water oxidation for electrocatalytic water splitting. In the work, molybdenum-doped nickel copper hydrotalcite (NiCuMo_x LDH) nanoarrays have been firstly in situ grown on nickel foam (NF) via a typical hydrothermal process. When NiCuMo_0.2 LDH/NF was used as a OER electrocatalyst, it displays superior electrocatalytic performance with the need of small overpotentials of only 290 mV to drive 40 mA cm⁻² and a low Tafel slope of 39.8 mV dec⁻¹, which are almost one of the best water oxidation activities reported so far. The enhanced electrocatalytic performance is attributed to unique urchin-like structure, more exposure to active sites and enhanced charge transfer rate owing to the synergistic effect of Mo doping and NiCu LDH. The work put forward a new method for the development of efficient water oxidation electrocatalysts, which will fill the gap for the exploitation of trimetal LDH-based electrodes in large-scale water splitting applications in the future.     

Accessible active sites activated by nano cobalt antimony oxide @ carbon nanotube composite electrocatalyst for highly enhanced hydrogen evolution reaction

The electrochemical hydrogen evolution reaction (HER) was one of new energy development strategies with clean, efficient and renewable characteristics, and electrocatalysts play a crucial role in HER technology. Herein, a composite material (CSO@0.5CNT) derived from the combination of nano cobalt antimony oxide (CSO) with carbon nanotubes (CNT) through hydrothermal reaction, in which the nanoparticles of CSO were closely compounded on the surface of CNT, could be a highly efficient electrocatalyst for HER in 1 M KOH. The binary composite electrocatalyst of CSO and CNT reduced the internal resistance, promoted the charge transfer, exhibited a large electrochemical active area, and obtained the lower overpotential, with 155 mV at 10 mA/cm² current density. Moreover, such a CSO@0.5CNT electrocatalyst displayed a small Tafel slope of 86.5 mV dec^?1, excellent catalytic activity and extraordinary long-term structural stability after 30 h and 3000 CV cycles. Furthermore, the electrocatalytic mechanism revealed by Density Functional Theory (DFT) calculation proved that, the decomposition of H₂O molecules was the control step of the whole HER, and the superior electron transport ability of CNT was favorable to the improvement of electrocatalytic performance. Benefitting from accessible active sites on carbon nanotube (C atom) and CSO (Co atom), the composite electrocatalyst of CSO@0.5CNT displayed synergistic effect for electrocatalytic HER properties, and that was the main mechanism for significantly improving the electrocatalytic activities. Our work provides a novel strategy towards high-efficiency electrocatalysts for hydrogen evolution reaction.     

Tailoring Cr doped NiFeP nanoparticles embedded in 3D cellulose nanofibrils carbon architecture for efficient oxygen evolution reaction

Oxygen evolution reaction (OER) is considered the bottleneck that restricting the pace of electrocatalytic hydrogen production. Modulating structure and heterogeneous doping are essential approaches to effectively promote the electrocatalytic efficiency and stability. Herein, three-dimensional (3D) porous Cr doped NiFeP nanoparticles encapsulated in cellulose nanofibrils (CNF) carbon architecture (Cr–NiFeP/NC) with high-efficiency and durable OER performance was constructed. CNF played crucial role on the construction of 3D porous framework and promoting the OER performance significantly. Benefiting from the 3D porous structure, high specific surface area and exposed abundant active sites, the Cr–NiFeP/NC electrocatalyst displayed excellent OER performance, which the overpotential to deliver the current density of 10 mA cm⁻² was only 249 mV with a Tafel slope of 51.2 mV dec⁻¹ in 1.0 M KOH, outperforming the RuO₂ and other reported electrocatalysts remarkably. In addition, the Cr–NiFeP/NC electrocatalyst exhibited outstanding stability, which the overpotential was only increased by 2.5% after 48 h chronopotential measurement to deliver a current density of 10 mA cm⁻² with stable morphology and structure. This work demonstrated an integrated strategy of Cr doping and 3D porous structure modulating employed CNF as skeleton for the efficient and durable OER performance, providing a spark for hydrogen production by water splitting.     

A nano-spherical structure Ni3S2/Ni(OH)2 electrocatalyst prepared by one-step fast electrodeposition for efficient and durable water splitting

Developing non-noble metal catalysts with excellent electrocatalytic performance and stability is of great significance to hydrogen production by water electrolysis, but there are still problems of low activity, complex preparation and high cost. Herein, we fabricated a novel Ni₃S₂/Ni(OH)₂ dual-functional electrocatalyst by a one-step fast electrodeposition on nickel foam (NF). While maintaining the electrocatalytic performance of Ni₃S₂, the existence of heterostructure and Ni(OH)₂ co-catalyst function greatly improves the overall water splitting performance of Ni₃S₂/Ni(OH)₂–NF. Hence, It shows a low overpotential of 66 mV at 10 mA cm^?2 for HER and 249 mV at 20 mA cm^?2 for OER. The dual-functional electrocatalyst needs only 1.58 V at 20 mA cm^?2 when assembled two-electrode electrolytic cell. Impressively, the electrocatalyst also shows outstanding catalytic stability for about 800 h when 20 and 50 mA cm^?2 constant current was applied, respectively which demonstrates a potential electrocatalyst for overall water splitting.     

Heterostructured two dimensional materials of MXene and graphene by hydrothermal method for efficient hydrogen production and HER activities

Recent development on two-dimensional (2D) heterostructured graphene and MXene materials were explored for electrochemical water splitting hydrogen evolution reaction (HER) activity. The hybrid MXene/reduced graphene oxides as two-dimensional (2D) hybrid structures were prepared by facile hydrothermal techniques at 150 °C with MXene and RG hybrid layered composites. As-prepared electrocatalytic active materials have been confirmed through structural and surface morphological studies such as XRD, RAMAN, FT-IR and SEM analysis. The prepared 2D materials were carried out for HER activities due to attractive conductivity and mass transfer process. HER performance were tested from linear sweep voltammetry (LSV) cures. The prepared MX, RG and MX@RG hybrid electrocatalyst exhibited overpotential values as observed as 220 mV, 193 mV, 121 mV respectively at 10 mAcm^?2 cathodic on set. MX@RG hybrid heterostructure exhibited enhanced HER action with lowest overpotential (η = 121 mV) and good H₂ productions as an active future electrocatalyst for energy storage and conversion applications.     

MOF-derived Zn,S, and P co-doped nitrogen-enriched carbon as an efficient electrocatalyst for hydrogen evolution reaction

In this study, Zn, S, and P co-doped nitrogen N-enriched carbon (ZnSP/NC) was successfully fabricated as an efficient electrocatalyst for the hydrogen evolution reaction (HER) process via pyrolysis, sulfurization, and phosphorization. The metal Zn derived from zeolitic imidazolate framework-8 (ZIF-8) was combined with the S element to form ZnS nanoparticles, and then embedded in N-enriched carbon during the sulfurization process. Following this, the P element was well-dispersed in the catalyst via phosphorization. It was found that ZnSP/NC exhibits excellent electrocatalytic activity when used as a catalyst for the HER process. ZnSP/NC, with an overpotential of 171 mV and a Tafel slope of 54.78 mV dec⁻¹, demonstrates superior electrocatalytic activity as compared to Zn/NC (277 mV, 92.34 mV dec⁻¹) and ZnS/NC (241 mV, 76.41 mV dec⁻¹). During the HER process, ZnS and P serve as active sites, while the N-enriched carbon provides reliable electronic transmission. The synergistic effects among the ZnS, P, and N-enriched carbon result in an excellent electrocatalytic activity of ZnSP/NC for the HER process.     

Preparation of PEDOT-modified double-layered hollow carbon spheres as Pt catalyst support for methanol oxidation

In this paper, Pt nanoparticles (Pt NPs) deposited hybrid carbon support is prepared by modifying double-layered hollow carbon spheres（DLHCs）with poly(3,4-ethylenedioxythiophene) (PEDOT) and used as anode catalyst of methanol oxidation. The structure of nanocomposites is characterized by SEM, TEM, FT-IR, XRD and XPS, confirming the greatly enhanced synergistic effect between the PEDOT and DLHCs, and illustrating the uniform distribution of Pt NPs on the PEDOT/DLHCs composite surface with a small particle size (~2.63 nm). Cyclic voltammetry, chronoamperometry and impedance spectroscopy applied to determine the electrocatalytic activity of catalysts, it is found that the synthesized PEDOT/DLHCs/Pt possesses excellent characteristics such as large electrochemically active surface area and high mass activity of 59.45 m² g⁻¹ and 807 mA mg⁻¹ in 0.5 M H₂SO₄ containing 1 M methanol solution, which is almost 1.24 and 2.8 times greater than those of commercial Pt/C, and the catalyst exhibits superior stability after 500 durability cycles. The enhanced electrocatalytic behavior can be ascribed to the excellent electronic conductivity of PEDOT-modified DLHCs and the strong binding of PEDOT/DLHCs to Pt NPs, suggesting that the PEDOT/DLHCs/Pt is a promising electrocatalyst for direct methanol fuel cell.     

Self-supported hierarchical porous FeNiCo-based amorphous alloys as high-efficiency bifunctional electrocatalysts toward overall water splitting

Rationally designing an efficient and cost-effective bifunctional electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is a primary matter in applying electrocatalytic water splitting. Herein, a self-supported FeNiCo-based amorphous catalyst with a hierarchical micro/nanoporous structure is fabricated by dealloying an amorphous/nanocrystalline precursor. The amorphous nanoporous framework enables the prepared electrocatalyst to afford fast reaction kinetics, abundant active sites, and enhanced electrochemical active surface areas (ECSAs). Such structural advantages and the synergistic effects of the ternary transition metals contribute to a dramatic catalytic activity of this electrocatalyst under alkaline conditions, which delivers the current density of 10 mA cm⁻² at a low overpotential of 134 mV for HER and 206 mV for OER, respectively. Furthermore, a full electrolysis apparatus constructed by the self-supported hierarchical micro/nanoporous FeNiCo-based amorphous electrocatalyst as both cathode and anode acquires a dramatically low voltage of 1.58 V operating at 10 mA cm⁻² along with stability for more than 24 h for overall water splitting.     

Co/VN heterostructure coated with holey interconnected carbon frameworks as bifunctional catalysts

The development of transition-metal electrocatalyst is of great importance to bring down costs and enhance performance for fuel cells and water splitting. The multiple efforts have been concentrated on bifunctional electrocatalysts toward hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). Only a few works reach desirable durability and performance levels. Here, Co/VN heterostructure with rational porous structure is formed in response to the sensible cobalt and vanadium ratio. Owing to synergistic interaction of holey interconnected structure with large surface area of 57 m² g^?1 and abundant interfaces between Co and VN phases, Co/VN@NC presents superior bifunctional electrocatalytic performance towards both HER and ORR. Co/VN@NC drives the reaction with low overpotential η₁₀ of 96 mV and Tafel slope of 82 mV dec^?1 along with outstanding stability for HER. Furthermore, Co/VN@NC obtains an onset potential (0.954 V) and half-wave potential (0.796 V) with superior methanol tolerance and durability for ORR.     

Nitrogen doped graphene supported Pd as hydrogen evolution catalyst for electrochemical methanol reformation

Electrochemical methanol reformation (ECMR) method has been identified as one of the most effective method for on-site hydrogen production. However, concentrated research towards the development of efficient inexpensive hydrogen evolution reaction (HER) electrocatalyst holds the pivotal role in realizing the hydrogen economy. In this context, for the first time N-graphene supported Pd (Pd/NG) was synthesised and employed as an HER catalyst in ECMR process. N-graphene was synthesised by modified Hummer's method followed by Pd deposition through hydrothermal route. The electrocatalytic activity of Pd/NG for hydrogen evolution was evaluated by CV and LSV techniques. Tafel slope of Pd/NG and Pt/C was calculated from LSV curves and was found to be 33 and 31 mV/decade, respectively. Exchange current density was found to be 3.6 and 3.2 × 10⁻⁴ A cm⁻² for Pd and Pt catalysts, respectively. The enhanced electrocatalytic activity is majorly attributed to the N-doping and uniform distribution of Pd nano particles on graphene. Further, the performance of Pd/NG was also evaluated in single ECMR cell using Pt–Ru/C at anode and Pd/NG at cathode as electrocatalysts. The results indicated the suitability of Pd/NG as cathode electrocatalyst for HER in ECMR process.     

Tuning of electrocatalytic activity of mixed metal dichalcogenides supported NiMoP coatings for alkaline hydrogen evolution reaction

The mixed metal dichalcogenides combination of WS₂–MoS₂ was coated onto Cu substrate by electroless NiMoP plating technique and the electrocatalytic hydrogen evolution reaction (HER) performance was investigated. The enhanced structural, morphological parameters and boosted electrocatalytic performance of the various metal-metal molar ratio of WS₂–MoS₂ onto NiMoP plate were identified under variable operating conditions and it was successfully evaluated by various characterization techniques. The well-defined crystalline nature, phase, particle size, structure, elemental analysis and surface morphology of prepared coatings were analyzed by FESEM, XRD, AFM and EDS mapping. The electrochemical analysis was performed using open circuit potential (OCP) analysis, chronoamperometry (CA), electrochemical impedance spectroscopy (EIS), Tafel curves, linear sweep voltammetry (LSV), cyclic voltammetry (CV) and polarization studies to find the activity of prepared electrocatalyst towards electrochemical hydrogen evolution reactions. The performance of bare NiMoP and WS₂–MoS₂/NiMoP plates were compared and found that the HER activity of NiMoP can be reinforced by composite incorporation through the synergic effect arises with in the catalytic system, which improves surface roughness and enhances the magnitude of electrocatalyst toward HER. The achievement of enhanced catalytic performance of coatings was authenticate by the kinetic parameters such as decreases in Tafel slope (98 mV dec^?1), enhanced exchange current densities (9.32 × 10^?4 A cm^?2), and a lower overpotential. The consistent performance and durability of the catalyst were also investigated. The enhanced electrocatalytic activity of WS₂–MoS₂/NiMoP coatings increased with respect to the surface-active sites associated with combination of mixed dichalcogenides and the synergic effect arises in between different components present in the coating system. This work envisages the progressive strategies for the economical exploration of a novel WS₂–MoS₂/NiMoP water splitting catalyst used for large scale H₂ generation. The prepared WS₂–MoS₂/NiMoP embedded Cu substrate possess high catalytic activity due to its least overpotential of 101 mV at a benchmark current density of 10 mA cm^?2, which demonstrated the sustainable, efficient and promising electrocatalytic property of prepared catalyst towards HER under alkaline conditions.     

CO2 assisted synthesis of silk fibroin driven robust N-doped carbon aerogels coupled with nickel–cobalt particles as highly active electrocatalysts for HER

Hydrogen evolution reaction (HER), has been considered as an ideal alternative energy system to alleviate the global energy crisis. Unfortunately, the rational design of a cost-effective, highly active and stable electrocatalyst remains a tough challenge. In this work, a CO₂ assisted synthesis of N- doped carbon aerogel derived from silk fibroin (SFCA) without any additives was used to anchor Nickel–Cobalt (NiCo) nanoparticles as an HER electrocatalyst in basic medium (1 M KOH). The obtained SFCA-NiCo electrocatalyst demonstrated outstanding electrochemical performance having an onset potential of 52 mV and a low overpotential of 179 mV at current density of 10 mA cm^?2, whilst exhibiting long term stability when tested for 24 h. The outstanding electrocatalytic performance marks SFCA-NiCo as a favourable electrocatalyst for HER and the synthesis strategy paves way for constructing novel catalysts even for other areas.     

A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).     

Combustion-derived BaNiO3 nanoparticles as a potential bifunctional electrocatalyst for overall water splitting

Electrochemical water electrolyser though an assuring solution for clean hydrogen production, the sluggish kinetics and high cost of existing precious metal electrocatalyst remains a barrier to its effective utilization. Herein, solution combustion route derived perovskite type barium nickelate (BaNiO₃) nanoparticles were developed and studied for their bifunctional electrocatalytic properties towards overall water splitting. The unannealed BaNiO₃ nanoparticles exhibited the highest OER and HER activity with overpotentials 253 mV and 427 mV respectively to attain 10 mAcm⁻² in 1.0 M KOH. Using unannealed BaNiO₃ as a bifunctional electrocatalyst in a two-electrode alkaline electrolyser, the cell was able to achieve the benchmark current density at a low cell voltage of 1.82 V. Impressively the setup's electrocatalytic performance improved 4.9% after continuous overall water splitting for 24 h at 30 mAcm⁻². Therefore, BaNiO₃ nanoparticles can be a low-cost and efficient alternative for noble metal electrocatalysts for clean H₂ production.     

Electrodeposition of Ir–Co thin films on copper foam as high-performance electrocatalysts for efficient water splitting in alkaline medium

Iridium-based bimetallic alloy system with unique performance is of great interest for high-temperature corrosive environment as a barrier layer or for water splitting of hydrogen/oxygen evolution reactions as a highly efficient and stable electrocatalyst. In this work, iridium-cobalt (Ir–Co) thin films were galvanostatically electrodeposited on a copper (Cu) foam electrode as an electrocatalyst for water splitting in 1.0 M KOH alkaline medium. The effects of loading and solution temperature on hydrogen evolution performance of Ir–Co deposits were investigated. The results show that Ir–Co deposits were adhered to substrates, with porous structure and hollow topography. The concentrations of Ir in the deposits with the loadings of 4.6, 3.2 and 0.8 mg·cm^?2 were 88, 88 and 75 wt%, respectively. Ir–Co deposit with the loading of 3.2 mg·cm^?2 required an overpotential of 108 mV for hydrogen evolution reaction to reach a current density of 30 mA cm^?2, having a low Tafel slope value of 36 mV·dec^?1. The changes in the solution temperature and catalyst loading had a significant effect on hydrogen evolution performance of Ir–Co/Ir–Co–O electrocatalysts. With the increasing of catalyst loading, the electrocatalytic activity increased firstly and then decreased. As the solution temperature was increased from 20 to 40 °C, the electrocatalytic activity of Ir–Co–O electrocatalyst increased, and then decreased with the rising of temperature. The apparent thermal activation energy obtained from Arrhenius plot was ~13.9 kJ mol^?1. Ir–Co/Ir–Co–O deposits exhibited relatively good electrocatalytic stability and durability. The present work demonstrates a possible pathway to develop a highly active and durable substitute for thin film electrocatalysts for water splitting of hydrogen evolution reaction.