Experiments on hydrogen production from methanol steam reforming in fluidized bed reactor

A novel approach for the hydrogen production which integrated methanol steam reforming and fluidized bed reactor (FBR) was proposed. The reaction was carried out over Cu/ZnO/Al₂O₃ catalysts. The critical fluidized velocities under different catalyst particle sizes and masses were obtained. The influences of the operating parameters, including that of H₂O-to-CH₃OH molar ratio, feed flow rate, reaction temperature, and catalyst mass on the performance of methanol steam reforming were investigated in FBR to obtain the optimum experimental conditions. More uniform temperature distribution, larger surface volume ratio and longer contacting time can be achieved in FBR than that in fixed bed reactor. The results indicate that the methanol conversion rate in FBR can be as high as 91.95% while the reaction temperatures is 330 °C, steam-to-carbon molar ratio is 1.3, and feed flow rate is 540 ml/h under the present experiments, which is much higher than that in the fixed bed.     

Experiments on hydrogen production from methanol steam reforming in the microchannel reactor

The entire experiments were conducted for microchannel methanol steam reforming, by which, the selection of catalyst, the operating parameters and the configuration of microchannels were discussed thoroughly. It was found that the higher the Cu concentration is, the more the corresponding active surface area of Cu will be, thereby improving the catalytic activity. The Cu-to-Zn ratio in Cu/ZnO/Al₂O₃ catalyst should be set at 1:1. The impacts of reaction temperature, feed flow rate, mixture temperature, and H₂O-to-CH₃OH molar ratio on the methanol conversion rate were also revealed and discussed. Characteristics of micro-reactors with various microchannels, including that 20 mm and 50 mm in length, as well as non-parallel microchannels, were investigated. It was found that the increase of microchannel length can improve the methanol conversion rate significantly. Besides, non-parallel microchannels help to maintain flow and temperature distribution uniformity, which can improve the performance of micro-reactor. In the present experiments, the presence of CO was under the condition that the methanol conversion rate was above 70%.     

Modeling and simulation of microwave double absorption on methanol steam reforming for hydrogen production

Methanol steam reforming (MSR) accompanied by methanol decomposition (MD) in an environment with microwave heating is modeled and simulated numerically in the present study. In the developed method, the governing equations simultaneously consider the continuity, momentum, energy, species and Maxwell’s equations. Meanwhile, the double absorption of microwaves by both the reactants and the catalyst bed in the reactor is also taken into account. The heating processes of microwaves on the reactants and the catalyst bed are described by establishing two sets of complex relative permittivity in the non-porous and porous region. The permittivity consists of a dielectric constant and a dielectric loss factor. The obtained results indicate that the developed model can predict MSR and MD accurately. With microwave irradiation, it is found that varying dielectric loss factor in the non-porous region has a significant impact on hydrogen production, revealing that the preheating of the reactants plays a prominent role in determining the performance of MSR. Regarding microwave power, it is observed that increasing power intensifies H₂ yield, especially at 500 W where methanol is depleted completely. However, an increase in power also makes MD tend to grow in that the CO₂ selectivity decreases.     

Performance assessment and evaluation of catalytic membrane reactor for pure hydrogen production via steam reforming of methanol

The steam reforming of methanol was investigated in a catalytic Pd–Ag membrane reactor at different operating conditions on a commercial Cu/ZnO/Al₂O₃ catalyst. A comprehensive two-dimensional non-isothermal stationary mathematical model has been developed. The present model takes into account the main chemical reactions, heat and mass transfer phenomena in the membrane reactor with hydrogen permeation across the PdAg membrane in radial direction. Model validation revealed that the predicted results satisfy the experimental data reasonably well under the different operating conditions. Also the impact of different operating parameters including temperature, pressure, sweep ratio and steam ratio on the performance of reactor has been examined in terms of methanol conversion and hydrogen recovery. The modeling results have indicated the high performance of the membrane reactor which is related to continuous removal of hydrogen from retentate side through the membrane to shift the reaction equilibrium towards formation of hydrogen. The obtained results have confirmed that increasing the temperature improves the kinetic properties of the catalyst and increase in the membrane's H₂ permeance, which results in higher methanol conversion and hydrogen production. Also it is inferred that the hydrogen recovery is favored at higher temperature, pressure, sweep ratio and steam ratio. The model prediction revealed that at 573 K, 2 bar and sweep ratio of 1, the maximum hydrogen recovery improves from 64% to 100% with increasing the steam ratio from 1 to 4.     

Recent trends in the development of reactor systems for hydrogen production via methanol steam reforming

Hydrogen is currently receiving significant attention as an alternative energy resource, and among the various methods for producing hydrogen, methanol steam reforming (MSR) has attracted great attention because of its economy and practicality. Because the MSR reaction is inherently activated over catalytic materials, studies have focused on the development of noble metal-based catalysts and the improvement of existing catalysts with respect to performance and stability. However, less attention has been paid to the modification and development of innovative MSR reactors to improve their performance and efficiency. Therefore, in this review paper, we summarize the trends in the development of MSR reactor systems, including microreactors and membrane reactors, as well as the various structured catalyst materials appropriate for application in complex reactors. In addition, other engineering approaches to achieve highly efficient MSR reactors for the production of hydrogen are discussed.     

Hydrogen production and thermal behavior of methanol autothermal reforming and steam reforming triggered by microwave heating

Hydrogen production and thermal behavior of methanol autothermal reforming (ATR) triggered by microwave heating are studied. Methanol steam reforming (MSR) is also investigated for comparison. A commercial Cu–Zn-based catalyst is used. The gas hourly space velocity (GHSV) is fixed at 72,000 h⁻¹, and the reaction temperature and the oxygen/methanol molar ratio (i.e. O₂/C ratio) are in the ranges of 250–300 °C and 0–0.5, respectively. The results suggest that an increase in O₂/C ratio or reaction temperature diminishes the supplied energy for microwave irradiation, as a result of more oxidative reactions involved. However, the performance of methanol ATR at 300 °C is lower than that at 250 °C. The methanol conversion of ATR is beyond 90% at O₂/C = 0.125 and 0.5, whereas it is relatively low (56–67%) at O₂/C = 0.25, presumably due to the weakened microwave irradiation and insufficient heat release. The spectrum analysis of supplied power using the fast Fourier transform (FFT) algorithm indicates that the supplied power characteristics of endothermic reactions are different from those of exothermic reactions.     

Evaluation of silica membrane reactor performance for hydrogen production via methanol steam reforming: Modeling study

The aim of this work is to analyze the potential application of microporous silica membrane reactor carrying out methanol steam reforming reaction for hydrogen production. As a further study, a comparison with dense Pd–Ag membrane reactor and a traditional reactor, working at the same operating conditions of silica membrane reactor, is realized.     

Thermal behavior and hydrogen production of methanol steam reforming and autothermal reforming with spiral preheating

The present study aims to investigate the thermal behavior and hydrogen production characteristics from methanol steam reforming (MSR) and autothermal reforming (ATR) under the effects of a Cu-Zn-based catalyst and spiral preheating. Two different reaction temperatures of 250 and 300 °C are taken into account. Meanwhile, the O/C ratio (i.e. the molar ratio between O₂ and methanol) and S/C ratio (i.e. the molar ratio between steam and methanol) are controlled in the ranges of 0-0.5 and 1-2, respectively. The condition of O/C = 0 represents the reaction of MSR. By monitoring the supplied power into the reactor with a fixed gas hourly space velocity (GHSV) of 72,000 h⁻¹, the experimental results indicate that an exothermic reaction from ATR can be attained once the O/C ratio is as high as 0.125. Increasing O/C ratio causes more heat released from the reaction, this results in the decrease in the frequency of supplied power, especially at O/C = 0.5. It is noted that the concentration of CO in the product gas is quite low compared to that of CO₂. An increase in O/C ratio abates the concentration of H₂ from the consumption of per mol methanol; however, the H₂ yield in terms of thermodynamic analysis is increased. On account of the utilization of spiral preheating on the reactants, within the investigated operating conditions the methanol conversion and hydrogen yield were always higher than 95 and 90%, respectively. A comparison suggests that the methanol conversion from ATR of methanol with spiral preheating is superior to those of other studies.     

A performance study of methanol steam reforming in an A-type microchannel reactor

The methanol steam reforming (MSR) performance in a microchannel reactor is directly related to the flow pattern design of the microchannel reactor. Hydrogen production improvements can be achieved by optimal design of the flow pattern. In this study, an A-type microchannel reactor with a flow pattern design of one inlet and two outlets was applied to conduct the MSR for hydrogen production. The MSR performance of the A-type microchannel reactor was investigated through numerical analysis by establishing a three-dimensional simulation model and compared with that of the conventional Z-type microchannel reactor. Experiments were also conducted to test the MSR performance and validate the accuracy of the simulation model. The results showed that compared with the conventional Z-type microchannel reactor, the species distributions in the A-type microchannel reactor were more homogeneous. In addition, compared with the Z-type microchannel reactor, the A-type microchannel reactor was shown to effectively increase the methanol conversion rate by up to 8% and decrease the pressure drop by about 20%, regardless of a slightly higher CO mole fraction. It was also noted that with various quantities of microchannels and microchannel cross sections, the A-type microchannel reactor was still more competitive in terms of a higher methanol conversion rate and a lower pressure drop.     

Mathematical simulation of hydrogen production via methanol steam reforming using double-jacketed membrane reactor

The hydrogen production and purification via methanol reforming reaction was studied in a double-jacketed Pd membrane reactor using a 1-D, non-isothermal mathematical model. Both mass and heat transfer behavior were evaluated simultaneously in three parts of the reactor, annular side, permeation tube and the oxidation side. The simulation results exhibited that increasing the volumetric flow rate of hydrogen in permeation side could enhance hydrogen permeation rate across the membrane. The optimum velocity ratio between permeation and annular sides is 10. However, hydrogen removal could lower the temperature in the reformer. The hydrogen production rate increases as temperature increases at a given Damköhler number, but the methanol conversion and hydrogen recovery yield decrease. In addition, the optimum molar ratio of air and methanol was 1.3 with three air inlet temperatures. The performance of a double-jacketed membrane reactor was compared with an autothermal reactor by judging against methanol conversion, hydrogen recovery yield and production rate. Under the same reaction conditions, the double-jacketed reactor can convert more methanol at a given reactor volume than that of an autothermal reactor.     

Experimental investigation on hydrogen production by methanol steam reforming in a novel multichannel micro packed bed reformer

A novel multichannel micro packed bed reactor with bifurcation inlet manifold and rectangular outlet manifold was developed to improve the methanol steam reforming performance in this study. The commercial CuO/ZnO/Al₂O₃ catalyst particles were directly packed in the reactor. The flow distribution uniformity in the reactor was optimized numerically. Experiments were conducted to study the influences of steam to carbon molar ratio (S/C), weight hourly space velocity (WHSV), reactor operating temperature (T) and catalyst particle size on the methanol conversion rate, H₂ production rate, CO concentration in the reformate, and CO₂ selectivity. The results show that increase of the S/C and T, as well as decrease of the WHSV and catalyst particle size, both enhance the methanol conversion. The CO concentration decreases as the S/C and WHSV increase as well as the T and catalyst particle size decrease. Moreover, T plays a more important role on the methanol steam reforming performance than WHSV and S/C. The impacts on CO concentration become insignificant when the S/C is higher than 1.3, WHSV is larger than 1.34 h⁻¹ and T is lower than 275 °C. A long term stability test of this reactor was also performed for 36 h and achieved high methanol conversion rate above 94.04% and low CO concentration less than 1.05% under specific operating conditions.     

Numerical investigation of a multichannel reactor for syngas production by methanol steam reforming at various operating conditions

A novel multichannel reactor with a bifurcation inlet manifold, a rectangular outlet manifold, and sixteen parallel minichannels with commercial CuO/ZnO/Al₂O₃ catalyst for methanol steam reforming was numerically investigated in this paper. A three-dimensional numerical model was established to study the heat and mass transfer characteristics as well as the chemical reaction rates. The numerical model adopted the triple rate kinetic model of methanol steam reforming which can accurately calculate the consumption and generation of each species in the reactor. The effects of steam to carbon molar ratio, weight hourly space velocity, operating temperature and catalyst layer thickness on the methanol steam reforming performance were evaluated and discussed. The distributions of temperature, velocity, species concentration, and reaction rates in the reactor were obtained and analyzed to explain the mechanisms of different effects. It is suggested that the operating temperature of 548 K, steam to carbon ratio of 1.3, and weight hourly space velocity of 0.67 h⁻¹ are recommended operating conditions for methanol steam reforming by the novel multichannel reactor with catalyst fully packed in the parallel minichannels.     

H2 production in silica membrane reactor via methanol steam reforming: Modeling and HAZOP analysis

The main aim of this work is the presentation of both qualitative safety and quantitative operating analyses of silica membrane reactor (MR) for carrying out methanol steam reforming (MSR) reaction to produce hydrogen. To perform the safety analysis, HAZOP method is used. Before the HAZOP analysis, a comprehensive investigation of most important operating parameters effects on silica MR performance is required. Therefore, for a quantitative analysis, a 1-dimensional and isothermal model is developed for evaluating the reaction temperature, reaction pressure, feed molar ratio (steam/methanol) and feed flow rate effects on silica MR performance in terms of methanol conversion and hydrogen recovery. The model validation results show good agreement with experimental data from literature. As a consequence, simulation results indicate that the reaction pressure and feed molar ratio have dual effect on silica MR performance. In particular, it is found that methanol conversion is decreased by increasing the reaction pressure from 1.5 to 4.0 bar, whereas over 4.0 bar, it is improved. Moreover, the hydrogen recovery is decreased by increasing the feed molar ratio from 1 to 5, while over 5, it was approximately constant. After the evaluation of modeling results, the HAZOP analysis for silica MR is carried out during MSR reaction. The analysed operating parameters in the modeling study have been considered as key parameters in the HAZOP analysis. The safety assessment results are presented in tables as check list. By considering the HAZOP results, safety pretreatment works are recommended before or during the experimental tests of MSR reaction in silica MR. According to different parameters consequences, reaction temperature is the most critical parameter in MSR reaction for the silica MR studied in this work. In particular, to avoid the consequences of temperature deviation, it is recommended to use a PID temperature controller in the silica MR for MSR reaction.     

Microwave-activated methanol steam reforming for hydrogen production

Methanol steam reforming (MSR) was carried out in a catalytic packed bed reactor under electrical and microwave heating using the two most common catalysts for this process-CuZnO/Al₂O₃ and PdZnO/Al₂O₃. Significant two-dimensional temperature gradients were found, especially in the latter case. Our results show that for the same average bed temperature, methanol conversion is higher under microwave heating (>10%). On the other hand, the product distribution is not affected by the heating mode. We demonstrate that even in cases where the maximum temperature along the entire height of the bed is significantly higher under electrical heating, conversion is either higher in the microwave case or approximately the same between the two heating modes. Finally, our experimental data indicate that a given methanol conversion can be achieved with lower net heat input to the reactor under microwave heating. This does not mean lower total energy consumption in the microwave process due to the limitations in the magnetron efficiency and the reflected power. However, it may be an implicit indication of higher temperature at metal sites than in bulk phase (microscale hot spot formation) due to the selective heating principle.     

Robust multi-objective optimization of methanol steam reforming for boosting hydrogen production

Methanol steam reforming (MSR) has been considered as a promising method for producing pure hydrogen in recent decades. A comprehensive two-dimensional steady-state mathematical model was developed to analyze the MSR reactor. To improving high purity hydrogen production, a triple-objective optimization of the MSR reactor is performed. Non-dominated Sorting Genetic Algorithm-II (NSGA-II) is employed as a robust optimization approach to maximize the three objectives, termed as, methanol conversion, CO selectivity, and H₂ selectivity. The Pareto optimal frontier has also been provided and the ultimate solution of the Pareto front has been found by the three decision-making methods (TOPSIS, LINMAP, and Shannon's Entropy). Among the three distinct decision-making approaches, LINMAP presents better results according to the deviation index parameter. It has been shown that a perfect agreement is available between the plant and simulation data. Operating under the optimum values based on the LINMAP method confirms an almost 47.04% enhancement of H₂ mass fraction compared to the conventional industrial MSR reactor. The predicted results advocate that the key superiority of the optimized-industrial reactor is the remarkable higher production rate of hydrogen compared to the conventional MSR reactor which makes optimized-industrial reactor both feasible and beneficial.     

Theoretical evaluation of various configurations of silica membrane reactor in methanol steam reforming using CFD method

The main purposes of this work was to evaluate from a theoretical point of view the performance of silica membrane reactors (MRs) in various configurations for generating hydrogen via methanol steam reforming (MSR) reaction using a two dimensional computational fluid dynamic (CFD) method, presenting details about molar fractions of gas species, velocity and pressure distributions at the simulated conditions. The CFD model was firstly validated and, then, used for the simulations, achieving an acceptable agreement between numerical outcomes and experimental data. The simulations were realized for MSR reaction carried out in three types of silica MRs, namely: 1) silica MR with cocurrent flow pattern (MR1); 2) silica MR with countercurrent flow pattern (MR2); 3) silica MR with countercurrent flow pattern including a water gas shift (WGS) reaction stage in the permeate side (MR3), meanwhile comparing the results with a traditional reactor (TR). The influence of several operating parameters (reaction temperature and pressure, and feed flow rate) on the performance of the aforementioned silica MRs in terms of methanol conversion, hydrogen yield and CO-selectivity was evaluated and the results compared with an equivalent TR. The simulations via CFD method indicated the MR3 results to be the best solution over the other MR proposed configurations and the TR as well, presenting the best simulation results at 10 bar of transmembrane pressure, 513 K, SF = 6, GHSV = 6000 h⁻¹ and feed molar ratio = 3/1 with CO selectivity ≤0.04%, methanol conversion and hydrogen yield >90%.     

Methanol steam reforming in a microchannel reactor by Zn-, Ce- and Zr- modified mesoporous Cu/SBA-15 nanocatalyst

Hydrogen production by steam reforming of methanol was studied over several Cu/SAB-15-based nanocatalysts in a parallel-type microchannel reactor. The catalysts were prepared through impregnation method and XRD, BET, FT-IR, FE-SEM, TEM, H₂-TPR and TGA techniques were used to characterize surface and structural properties of the synthesized catalysts. The effects of reaction temperature, WHSV and S/C molar ratio on the methanol conversion and selectivities of the gaseous products were studied. Then, effects of the metallic promoters were investigated to improve performance of the catalysts. It was revealed that ZnO and CeO₂ promoters have positive effects on decreasing CO selectivity and ZrO₂ promotes methanol conversion. Furthermore, ZrO₂ and CeO₂ were declared to improve stability of the catalyst. Among the evaluated catalysts, Cu/ZnO/CeO₂/ZrO₂/SBA-15 can provide optimal methanol conversion with low CO concentration in the gaseous products. For this catalyst, the methanol conversion and hydrogen selectivity reached 95.2% and 94.6%, respectively.     

Trapezoidal cavity for high reforming temperature performance of auto-thermal methanol steam reforming micro-reactor for hydrogen production

To realize high reforming temperature performance of auto-thermal methanol steam reforming micro-reactor (ATMSRM) for hydrogen production (HP) and enhance its long-term HP performance, a trapezoidal cavity on methanol steam reforming (MSR) chamber plate is proposed. A numerical simulation model of the ATMSRM for HP is built. The influence of different geometric sizes of the trapezoidal cavity on reforming temperature performance of ATMSRM is investigated by the numerical simulation model. The reforming temperature performance and HP performance of ATMSRMs using the optimal trapezoidal cavity, the combustion reaction support (CRS) with optimal multiple micro-channels and the non-optimization are compared. The reforming temperature performance and HP performance of the size-enlarged ATMSRM with the optimal trapezoidal cavity are also studied. The results show that compared to other trapezoidal cavities, reforming temperature difference per 1 °C (△TA) of the ATMSRM using the F-type trapezoidal cavity with 50 mm length, 76 mm width, 0.4 mm front end depth and 0.2 mm back end depth is smaller, which is 0.01709 °C °C^?1 under 0.9 mL/min combustion methanol injection rate and 4 mL/h reforming methanol-water mixture injection rate. Compared with ATMSRMs using the CRS with optimal multiple micro-channels and the non-optimization, ATMSRM using F-type trapezoidal cavity has a better comprehensive HP performance. Compared with non-enlarged ATMSRM using F-type trapezoidal cavity, size-enlarged ATMSRM using F-type trapezoidal cavity has bigger △TA, larger reforming methanol conversion rate, higher hydrogen yield and more carbon monoxide selectivity. This research work offers a new method for enhancing reforming temperature performance of ATMSRM for HP.     

Comparison between 1D and 2D numerical models of a multi-tubular packed-bed reactor for methanol steam reforming

The hydrogen-rich gas produced in-situ by methanol steam reforming (MSR) reactions significantly affects the performance and endurance of the high-temperature polymer electrolyte membrane (HT-PEM) fuel cell stack. A numerical study of MSR reactions over a commercial CuO/ZnO/Al₂O₃ catalyst coupling with the heat and mass transfer phenomena in a co-current packed-bed reactor is conducted. The simulation results of a 1D and a 2D pseudo-homogeneous reactor model are compared, which indicates the importance of radial gradients in the catalyst bed. The effects of geometry and operating parameters on the steady-state performance of the reactor are investigated. The simulation results show that the increases in the inlet temperature of burner gas and the tube diameter significantly increase the non-uniformity of radial temperature distributions in reformer tubes. Hot spots are formed near the tube wall in the entrance region. The hot-spot temperature in the catalyst bed rises with the increase in the inlet temperature of burner gas. Moreover, the difference in simulation results between the 1D and 2D models is shown to be primarily influenced by the tube diameter. With a methanol conversion approaching 100% or a relatively small tube diameter, the simplified 1D model can be used instead of the 2D model to estimate the reactor performance.     

Co-current and counter-current modes for methanol steam reforming membrane reactor

In this simulation study, methanol steam reforming reaction to produce synthesis gas has been studied in a membrane reactor when shell side and lumen side streams are in co-current mode or in counter-current mode. The simulation results for both co-current and counter-current modes are presented in terms of methanol conversion and molar fraction versus temperature, pressure, _H2O/_CH3OH${\mathrm{H}}_2\mathrm{O}/{\mathrm{CH}}_3\mathrm{OH}$ molar feed flow rate ratio and axial co-ordinate.