A parametric study of a renewable energy based multigeneration system using PEM for hydrogen production with and without once-through MSF desalination

The importance of renewable energy compared to fossil fuels is increasing due to growing energy demand and environmental challenges. Multi-generation systems use one or more energy sources and produce several useful outputs. The present study aims at investigating and comparing solar energy based multi-generation systems with and without once-through MSF desalination unit from the thermodynamic point of view. Firstly, hydrogen, electricity, and hot water for space heating and domestic usage are produced using the system, which consists of a parabolic trough collector, an organic Rankine cycle (ORC) and a PEM electrolyzer and heat exchanger as sub-systems. The performance of the entire system is evaluated from the energetic and exergetic points of view. Various parameters affecting hydrogen production rate and efficiency values are also investigated with the thermodynamic model implemented in the Engineering Equation Solver (EES) package. The system can produce hydrogen at a mass flow rate of 20.39 kg/day. The results of the study show that the energy and exergy efficiency values of the ORC are calculated to be 16.80% and 40% while those for the overall system are determined to be 78% and 25.50%, respectively. Secondly, once-through MSF desalination unit is integrated to the system between ORC evaporator and heat exchanger producing domestic hot water in the solar cycle in order not to affect hydrogen production rate while thermodynamic values are compared. Fresh water production capacity of the system is calculated to be at a volumetric flow rate of 5.74 m³/day with 10 stages.     

A new solar and geothermal based integrated ammonia fuel cell system for multigeneration

In this study, a new solar and geothermal based integrated system is developed for multigeneration of electricity, fresh water, hydrogen and cooling. The system also entails a solar integrated ammonia fuel cell subsystem. Furthermore, a reverse osmosis desalination system is used for fresh water production and a proton exchange membrane based hydrogen production system is employed. Moreover, an absorption cooling system is utilized for district cooling via available system waste heat. The system designed is assessed thermodynamically through approaches of energy and exergy analyses. The overall energy efficiency is determined to be 42.3%. Also, the overall exergy efficiency is assessed, and it is found to be 21.3%. The exergy destruction rates in system components are also analysed and the absorption cooling system generator as well as geothermal flash chamber are found to have comparatively higher exergy destruction rates of 2370.2 kW and 643.3 kW, respectively. In addition, the effects of varying system parameters on the system performance are studied through a parametric analyses of the overall system and associated subsystems.     

Exergy analysis of a hybrid solar hydrogen system with activated carbon storage

A proposed hybrid solar hydrogen system with activated carbon storage for residential power generation is assessed using exergy analysis. Energy and exergy balances are applied to determine exergy flows and efficiencies for individual devices and the overall system. A ‘base case’ analysis considers the proposed system without modification, while a ‘modified case’ extends the base case by considering the possibility of multiple product outputs. It is determined that solar photovoltaic-based sub-systems have the lowest exergy efficiencies (14-18%) and offer the most potential for improvement. A comparison of these two scenarios shows that the additional outputs raise the exergy efficiency of the modified case (11%) relative to the base case (4.0%). An investigation of the energy and exergy efficiencies of separate devices illustrates how energy analyses can be misleading. The hybrid system is expected to have several environmental benefits, which may offset to some degree economic barriers to implementation.     

Investigation of a unique integrated photoelectrochemical system for multigeneration purposes

This study develops, investigates and analyze a continuous type hybrid photoelectrochemical-chloralkali H₂ production reactor that converts the by–products into useful industrial commodities (i.e., Cl₂ and NaOH). The proposed system maximizes solar spectrum use by taking advantage of photocatalysis and PV/T. Furthermore, by using electrodes as electron donors to support the photochemical reaction, the potential risk of pollutant emissions is minimized. The final products of this novel integrated system can be listed as H₂, Cl₂, NaOH, heat, and electricity. In this study, the effects of operating temperature and inlet mass flow rates on H₂, Cl₂, heat, and electricity production, energy and exergy efficiencies, and exergy destruction rates are presented. The results of this investigation show that the proposed system is capable of producing hydrogen up to 70 L/h, chlorine up to 60 L/h, heat up to 800 W, electricity up to 160 W, with energy and exergy efficiencies up to 80% and 30%, respectively.     

Techno-economic assessment of a solar-geothermal multigeneration system for buildings

A techno-economic assessment is conducted for a multigeneration system comprised of two renewable energy subsystems—geothermal and solar—to supply electrical power, cooling, heating, hydrogen and hot water for buildings. The proposed system is evaluated in terms of energy and exergy efficiencies. The simulation results show that the electrolyzer produces 2.7 kg/h hydrogen. A parametric study is carried out to assess the effect of various parameters on the system energy and exergy efficiencies. The economic assessment, performed using the Hybrid Optimization of Multiple Energy Resources (HOMER) software, shows that the net present cost of the optimized electrical power system is $476,000 and the levelized cost of electricity is $0.089/kWh.     

Development and assessment of a novel solar heliostat-based multigeneration system

In this paper, a comprehensive study on thermodynamic analysis and assessment, through energy and exergy approaches, is conducted for a multigenerational solar based integrated energy system. The system proposed in this study is based on heliostat solar system integrated with steam turbine. The system is also integrated with seawater reverse osmosis desalination unit and absorption cooling system. The desalination unit operates with energy recovery through the utilization of Pelton turbine. The system produces cooling, heating, fresh water and hydrogen through electrolysis. It is furthermore designed to cover the demand of 4 MW electric power with the production of 1.25 kg/h of hydrogen and 90 kg/s of fresh water. The system advisor model software is applied on a case study for the solar heliostat optimization analysis.     

Dynamics and control of a thermally self-sustaining energy storage system using integrated solid oxide cells for an islanded building

A solid oxide cell-based energy system is proposed for a solar-powered stand-alone building. The system is comprised of a 5 kW_el solid oxide fuel cell (SOFC), a 9.5 kW_el solid oxide electrolysis cell (SOEC), and the required balance of plant. The SOFC supplies: 1- building demand in the absence of sufficient solar power, 2- heat for SOEC in endothermic and standby modes. Thermal integration of SOFC and SOEC is implemented through a network of heat exchangers, combined with set of control algorithms. Two control strategies were implemented to actuate the SOFC in response to endothermic heat demands of SOEC by manipulating: 1- electric power, 2- fuel utilization. The results of dynamic simulation of system for two scenarios (sunny day and cloudy day) showed successful compliance of temperature constraints with both methods. Manipulation of fuel utilization, however, resulted in better system performance in terms of efficiency and H₂ balance.     

Thermodynamic analysis of a novel solar and geothermal based combined energy system for hydrogen production

The present study develops a new solar and geothermal based integrated system, comprising absorption cooling system, organic Rankine cycle (ORC), a solar-driven system and hydrogen production units. The system is designed to generate six outputs namely, power, cooling, heating, drying air, hydrogen and domestic hot water. Geothermal power plants emit high amount of hydrogen sulfide (H₂S). The presence of H₂S in the air, water, soils and vegetation is one of the main environmental concerns for geothermal fields. In this paper, AMIS(AMIS® - acronym for “Abatement of Mercury and Hydrogen Sulphide” in Italian language) technology is used for abatement of mercury and producing of hydrogen from H₂S. The present system is assessed both energetically and exergetically. In addition, the energetic and exergetic efficiencies and exergy destruction rates for the whole system and its parts are defined. The highest overall energy and exergy efficiencies are calculated to be 78.37% and 58.40% in the storing period, respectively. Furthermore, the effects of changing various system parameters on the energy and exergy efficiencies of the overall system and its subsystems are examined accordingly.     

Thermodynamic analysis of a new renewable energy based hybrid system for hydrogen liquefaction

In this paper, a parametric study of the triple effect absorption cooling system (TEACS) integrated with solar photo-voltaic/thermal (PV/T), geothermal, and Linde–Hampson cycle is conducted. The effect of different operating parameters on the COPs, ratio ‘n’, amount of hydrogen gas pre-cooled, amount of hydrogen liquefied, and utilization factor of the integrated system are studied. It is found that when mass flow rate of air increases the energetic and exergetic COPs decrease in an exponential form from 2.6 to 1.9, and 0.4 to 0.3, respectively. The amounts of hydrogen gas pre-cooled and hydrogen liquefied decrease from 0.39 kg/s to 0.32 kg/s and 0.082 kg/s and 0.066 kg/s, respectively with increase in mass flow rate of air. Moreover, the amounts of hydrogen gas pre-cooled and hydrogen liquefied decrease from 0.42 to 0.27, and 0.088 to 0.066, respectively with increase in mass flow rate of geothermal. In addition, energetic and exergetic utilization factors of integrated system decrease from 0.059 to 0.037, and 0.21 and 0.13, respectively with increase in mass flow rate of geothermal.     

A renewable source based hydrogen energy system for residential applications

In this study, both concentrated solar power and wind energy systems are integrated with electrolyser, fuel cell and absorption cooling subsystems to supply power, cooling, heating and hydrogen to residential applications in an environmentally benign and efficient manner. These subsystems are integrated in a unique way to manage the excess power through water electrolysis to produce and store hydrogen. Integrated systems are thermodynamically analyzed, and their performance is assessed comparatively. Solar radiation intensity, inlet temperature and wind velocity are taken into account, and hence their effects on the system performance are investigated. The results of this study show that the present system appears to be efficient, environmentally friendly and hence sustainable.     

Design and optimum energy management of a hybrid renewable energy system based on efficient various hydrogen production

Utilizing renewable energy resources is one of the convenient ways to reduce greenhouse gas emissions. However, the intermittent nature of these resources has led to stochastic characteristics in the generation and load balancing of the microgrid systems. To handle these issues, an energy management optimization for microgrids operation should be done to urge the minimization of total system costs, emissions, and fuel consumption. An optimization program for decreasing the operational cost of a hybrid microgrid consisting of photovoltaic array, wind unit, electrolyzer, hydrogen storage system, reformer, and fuel cell is presented. Two different methods of producing hydrogen are considered in this study to ensure the effectiveness of the developed methodology. In the microgrid system with high penetration of renewable energy resources, using storage technologies to compensate for the intermittency of these resources is necessary. To evaluate the functioning of the microgrid system, a mathematical model for each source is developed to coordinate the system operation involving energy conversion between hydrogen and electricity. Particle Swarm Optimization Algorithm is utilized to determine the optimum size and operational energy management within the system. It is evident from the results that there is about a 10% reduction in the amount of CH₄ consumption in reformer when the electrolyzer was employed in the system. It is observed that the CH₄ reduction in summer and fall is higher than other seasons (10.6% and 11.5%, respectively). The reason is that the highest RES production occurs in these seasons during a year. It is also worth mentioning that the electrolyzer technology would play a significant role in decreasing the CH₄ consumption in the microgrid system.     

An integrated system of zinc oxide solar panels,fuel cells,and hydrogen storage for heating and cooling applications

Due to the production of hydrogen, using fuel cells for energy conversion and storing encounters safety problems. Combining high-temperature solid oxide fuel cells with photovoltaic solar panels or zinc oxide solar panels can be a good candidate to produce/convert and store the energy more efficiently for using at peak times. The current paper intends to analyze the efficiency of integration of zinc oxide solar panels and fuel cells to produce hydrogen directly. Therefore, the excess step of converting electricity to hydrogen and re-converting it to electricity, which is customarily used for the integration of the photovoltaic and solid oxide fuel cells, could be skipped. The new method paves the way for providing the required energy for heating/cooling through the floor heating and ceiling cooling systems as well as generating electricity. The article also demonstrates that it is possible to have heat during the day and night for an area of 1920 m² and 542 m². It is also possible to create coolness during the day and night for an area of 925 m² and 260 m².     

Energetic and exergetic assessments of a novel solar power tower based multigeneration system with hydrogen production and liquefaction

In this article, a thermodynamic investigation of solar power tower assisted multigeneration system with hydrogen production and liquefaction is presented for more environmentally-benign multigenerational outputs. The proposed multigeneration system is consisted of mainly eight sub-systems, such as a solar power tower, a high temperature solid oxide steam electrolyzer, a steam Rankine cycle with two turbines, a hydrogen generation and liquefaction cycle, a quadruple effect absorption cooling process, a drying process, a membrane distillation unit and a domestic hot water tank to supply hydrogen, electrical power, heating, cooling, dry products, fresh and hot water generation for a community. The energetic and exergetic efficiencies for the performance of the present multigeneration system are found as 65.17% and 62.35%, respectively. Also, numerous operating conditions and parameters of the systems and their effects on the respective energy and exergy efficiencies are investigated, evaluated and discussed in this study. A parametric study is carried out to analyze the impact of various system design indicators on the sub-systems, exergy destruction rates and exergetic efficiencies and COPs. In addition, the impacts of varying the ambient temperature and solar radiation intensity on the irreversibility and exergetic performance for the present multigeneration system and its components are investigated and evaluated comparatively. According to the modeling results, the solar irradiation intensity is found to be the most influential parameter among other conditions and factors on system performance.     

Decision-making between a grid extension and a rural renewable off-grid system with hydrogen generation

Most populations in rural Africa have no access to electricity, in this study, a comparative analysis between grid extension and the implementation of renewable off-grid hybrid power system is carried out. The objective of the study is to determine the best feasible option. Napier, a farming village in the Western Cape province of South Africa was selected as the site for the comparative analysis and HOMER PRO software was used to develop an optimal system using the wind and solar resources of the selected site. The load profile considered in the analysis includes lighting, cooking and hot water demands. The best feasible option is determined based on the Net Present Cost of each feasible scenario. Sensitivity analysis on the current cost and the projected cost of hydrogen storage w conducted to observe the impact of the cost of hydrogen storage on the renewable off-grid system cost of energy.     

Thermodynamic analysis and experimental investigation of a unique photoelectrochemical hydrogen production system

In this study, we thermodynamically analyze and experimentally investigate a continuous type hybrid photoelectrochemical H₂ generation reactor. This system enhances solar spectrum use by employing photocatalysis and PV/T. Additionally, by replacing electron donors with electrodes to drive the photocatalysis, the potential of pollutant emissions are minimized. In this study, the present reactor is tested under electrolysis operation during which the present reactor is investigated under three different inlet mass flow rates (0.25, 0.50, and 0.75 g/s) and four different operating temperatures (20, 40, 60, and 80 °C). Some parametric studies are run by varying the environmental temperature between 0 and 40 °C. In addition, the impact of coating the membrane electrode assembly of the reactor with Cu₂O is investigated. The present results show that the highest energy and exergy efficiencies occur at the environmental temperature of 20 °C which is about 60% and 50%, respectively. The Cu₂O coated membrane gives a lot higher current readings, meaning that the coating makes the membrane more conductive and increases H₂ production by permitting ions at a higher rate.     

Potential of renewable hydrogen production for energy supply in Hong Kong

Hong Kong is highly vulnerable to energy and economic security due to the heavy dependence on imported fossil fuels. The combustion of fossil fuels also causes serious environmental pollution. Therefore, it is important to explore the opportunities for clean renewable energy for long-term energy supply. Hong Kong has the potential to develop clean renewable hydrogen energy to improve the environmental performance. This paper reviews the recent development of hydrogen production technologies, followed by an overview of the renewable energy sources and a discussion about potential applications for renewable hydrogen production in Hong Kong. The results show that although renewable energy resources cannot entirely satisfy the energy demand in Hong Kong, solar energy, wind power, and biomass are available renewable sources for significant hydrogen production. A system consisting of wind turbines and photovoltaic (PV) panels coupled with electrolyzers is a promising design to produce hydrogen. Biomass, especially organic waste, offers an economical, environmental-friendly way for renewable hydrogen production. The achievable hydrogen energy output would be as much as 40% of the total energy consumption in transportation.     

A new solar based multigeneration system with hot and cold thermal storages and hydrogen production

A multigeneration system based on solar thermal energy associated with hot and cold thermal storage is designed and analyzed energetically and exergetically. The system produces electricity, a heating effect, a cooling effect, hydrogen, and dry sawdust biomass as outputs by means of organic Rankine cycles, a heat pump, two absorption chillers, an electrolyser, and a belt dryer. The intermittent behavior of the renewable energy source is addressed through the incorporation of hot and cold thermal storage systems to operate an organic Rankine cycle and provide cooling at night. The performance assessment indicates that the overall (day and night) energy and exergy efficiencies are 20.7% and 13.7%, respectively. The majority of the total exergy destruction is attributable to the sawdust belt dryer, at about 64.0%.     

Exergoeconomic and environmental impact analyses of a renewable energy based hydrogen production system

In this study, exergoeconomic and environmental impact analyses, through energy, exergy, and sustainability assessment methods, are performed to investigate a hybrid version renewable energy (including wind and solar) based hydrogen and electricity production system. The dead state temperatures considered here are 10 °C, 20 °C and 30 °C to undertake a parametric study. An electrolyzer and a metal hydride tank are used for hydrogen production and hydrogen storage, respectively. Also, the Proton Exchange Membrane Fuel Cell (PEMFC) and battery options are utilized for electricity generation and storage, respectively. As a result, the energy and exergy efficiencies and the sustainability index for the wind turbine are found to be higher than the ones for solar photovoltaic (PV) system. Also, the overall exergy efficiency of the system is found to be higher than the corresponding overall energy efficiency. Furthermore, for this system, it can be concluded that wind turbine with 60 gCO₂/month is more environmentally-benign than the solar PV system with 75 gCO₂/month. Finally, the total exergoeconomic parameter is found to be 0.26 W/$, when the energy loss is considered, while it is 0.41 W/$, when the total of exergy loss and destruction rates are taken into account.     

Thermodynamic and exergo-economic assessments of a new geothermally driven multigeneration plant

In this paper, a new geothermal-based multigeneration system is designed and investigated in both thermodynamic and economic analyses. The reason to select the geothermal source is that geothermal power is a renewable and sustainable power resource, and also it is not weather dependent. The proposed geothermal-based multigeneration plant is able to produce power, heating, cooling, swimming pool heating, and hydrogen. The main idea in this renewable-based multigeneration system is to create valuable products by using waste heat of subsystems. Then, by applying thermodynamic analyses, the energy and exergy performances of proposed multigeneration system are computed. Also, parametric work has been performed in order to see the impacts of the reference temperature, geothermal fluid temperature, and geothermal water mass flow rate. Finally, exergo-economic analysis based on exergy destruction or thermodynamic losses is done to gain more information about the system and to evaluate it better. According to the calculations, the overall plant's energy and exergy performances are 32.28% and 25.39%. Economic analysis indicates that hydrogen production cost can be dropped down to 1.06 $/kg H₂.