Amorphous CoFeP/NC hybrids as highly efficient electrocatalysts for water oxidation

The rational design and regulate structure and composition are pivotal for the development of highly efficient oxygen evolution reaction (OER) catalysts for water splitting. In this study, amorphous CoFeP/NC hybrid electrocatalyst has been synthesized by a simple and effective phosphorization of a CoFe-based coordination polymer under N₂ atmosphere. The synergistic effects between the CoFeP and N-doped carbon has led to high electronic conductivity attributed to the optimal Fe contents with N-doped carbon and enlarged electrocatalytic active surface area aroused by the nanostructure of CoFeP/NC, as well as the surface structural evolution of oxyhydroxide/phosphate during OER process. The resulting Co_0.35Fe_0.17P_0.48/NC electrocatalyst can attain a current density of 10 mA/cm² at an overpotential of 275 mV with a Tafel slope of 31 mV/dec on glassy carbon electrode and 228 mV on Ni foam electrode in 1 M KOH solution, long-term OER stability of this Co_0.35Fe_0.17P_0.48/NC under the applied potential of 1.53 V vs. RHE demonstrates no obvious decline in current densities of 110 mA/cm² within 17 h, which outperforms those of the contrast electrocatalysts in this work and also comparable to that of many of the reported electrocatalysts in the literatures. This Co_0.35Fe_0.17P_0.48/NC electrocatalyst highlights the rational modulation of optimal composition and electronic structure with homogeneous incorporation of the foreign metal-doped and N-doped carbon for the synthesis of highly efficient electrocatalysts toward to the water oxidation reactions.     

Efficient overall water splitting using nickel boride-based electrocatalysts

Currently there is tremendous interest in the discovery of low cost and efficient electrocatalysts for the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). In this work, iron-doped nickel boride (Fe_xNi_1-xB) and nickel boride (NiB) were successfully grown on 3D self-supporting graphene (SSG) electrodes via a one-step reduction approach. The Fe_0.2Ni_0.8B/SSG electrode required a very low overpotential of only 263 mV for OER (the best OER activity achieved to date for a metal boride). NiB/SSG showed modest OER performance but excellent HER activity. A water electrolyzer comprising Fe_0.2Ni_0.8B/SSG and NiB/SSG delivered a current density of 10 mA cm⁻² at a voltage of only 1.62 V. Further, the Fe_0.2Ni_0.8B/SSG and NiB/SSG catalysts showed excellent stability with no deactivation observed over 14 h of testing. Results demonstrate that nickel boride-based electrocatalysts are promising lost cost alternatives to precious metal-based electrocatalysts for OER, HER and overall water splitting.     

High electrochemical stability and low-agglomeration of defective Co3O4 nanoparticles supported on N-doped graphitic carbon nano-spheres for oxygen evolution reaction

The design of hybrid electrocatalysts with abundant active sites and long term stability is crucial for efficient oxygen evolution reaction (OER) application. Cobalt oxide is considered as one of the most promising electrocatalysts to replace noble metal due to its low cost, availability, and electrocatalytic activity towards the oxygen evolution reaction in alkaline media. However, nano-scale cobalt oxide suffers from severe surface self-agglomeration during the OER process, so that leading to poor activity and durability. Herein, ultra-small cobalt oxide nanoparticles are anchored on the surface of nitrogen doped porous 3D graphitic carbon nano-spheres (N-ACS@Co₃O₄) to increase the amount of exposed active site and avoid the self-agglomeration. The obtained electrocatalyst (N-ACS@Co₃O₄) is enriched with abundant oxygen vacancies and exhibits a superior OER activity (Overpotential of 237 mV at 10 mA.cm⁻²) and exceptional stability for at least 30 h in alkaline electrolyte (1 M KOH). The DFT calculations demonstrate that the strong adsorption of Co₃O₄ on N-doped graphene can prevent its agglomeration, and therefore improves the stability of Co₃O₄ nanoparticles during OER process in line with the experimental results.     

Co0.85Se on three-dimensional hierarchical porous graphene-like carbon for highly effective oxygen evolution reaction

Designing an efficient, cheap and abundant catalyst for oxygen evolution reaction (OER) is crucial for the development of sustainable energy sources. A novel catalyst which could be a promising candidate for such electrocatalysts is described. Co_0.85Se supported on three-dimensional hierarchical porous graphene-like carbon (HPG) exhibits outstanding catalytic performances for OER in alkaline medium. It is found that the onset overpotential is 311 mV on the Co_0.85Se/HPG electrode, which is more 28 and 41 mV negative than that on the Co/HPG and Co₃O₄/HPG electrodes. What's more, the value of Tafel slope is 61.7 mV dec⁻¹ and the overpotential at the current density of 10 mA cm⁻² is 385 mV on this electrode. The Co_0.85Se/HPG of this work is an appealing electrocatalyst for OER in basic electrolyte.     

Surface engineering of 2D MOF to construct high-density Co9S8 nanoparticles supported on nitrogen doped carbon for efficient oxygen evolution reaction

Transition metal sulfides and their hybrids are promising alternative to precious metal catalyst for the oxygen evolution reaction (OER). Herein, the high-density Co₉S₈ nanoparticles (NPs) embedded in N-doped carbon has been prepared by using surface-engineered zeolitic imidazolate framework-9 (ZIF-9) nanosheets as precursor. The surface of ZIF-9 was modified with TAA, which is able to create chemical barrier and prevents metal from aggregation in the subsequent pyrolysis, thus making small Co₉S₈ NPs densely anchored on carbon layers. Arising from the unique structure, Co₉S₈@NC affords an optimized electronic structure and rich effective reactive sites for OER. As expected, Co₉S₈@NC exhibits small overpotential of 264 mV at 10 mA cm⁻², low Tafel slope of 68.4 mV dec⁻¹, and superior stability for alkaline OER (0.1 M KOH). The electrolysis cell, which was equipped with Co₉S₈@NC cathode and Pt/C anode, shows low water splitting voltage of 1.58 V at 10 mA cm⁻² in 1.0 M KOH. This work employs an efficacious surface engineering strategy to design metal sulfide-based electrocatalysts for enhancing OER performance.     

Co-based MOF-derived Co/CoN/Co2P ternary composite embedded in N- and P-doped carbon as bifunctional nanocatalysts for efficient overall water splitting

In this work, we developed ternary metallic cobalt-cobalt nitride-dicobalt phosphide composite embedded in nitrogen and phosphorus co-doped carbon (Co/CoN/Co₂P-NPC) as bifunctional catalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The as-prepared Co/CoN/Co₂P-NPC is achieved by simultaneous annealing and phosphating of a Co–N rich metal-organic frameworks (MOFs) precursor. Compare with the phosphorus-free Co/CoN embedded nitrogen-doped carbon electrocatalyst (Co/CoN-NC), the as-prepared Co/CoN/Co₂P-NPC display superior HER and OER low overpotential of 99 mV and 272 mV at current density of 10 mA cm⁻². When Co/CoN/Co₂P-NPC electrocatalyst is use as bifunctional catalysts in overall alkaline water splitting, it exhibit excellent behaviour with 10 mA cm⁻² current at overall cell potential of 1.60 V. The excellent performance of Co/CoN/Co₂P-NPC electrocatalyst is attributed to the phosphating process that could further enhance synergistic effect, create stronger electronic interactions, and form efficient dual heteroatom doping to optimize the interfacial adhesion within the electrocatalyst. This present work will create more opportunities for the development of new, promising and more active sites electrocatalysts for alkaline electrolysis.     

Vanadium nitride based CoFe prussian blue analogues for enhanced electrocatalytic oxygen evolution

The development of efficient and stable nonprecious-metal catalysts remains a challenge for electrochemical water oxidation in practical applications. Prussian blue analogues (MM′-PBAs, A_xM_y [M′ (CN)₆]_z·nH₂O: A = alkali metal; M/M’ = transition metals), as a kind of potential electrocatalyst candidate for oxygen evolution reaction (OER), are rarely studied. Herein, by a facile coprecipitation method, CoFe–PBAs were in-situ grown on the surface of highly conductive vanadium nitride (VN) particles. The hybrid CoFe–PBAs/VN achieves the amelioration of the poor conductivity of bare CoFe–PBAs and the increase in the density of Co²⁺ active sites due to electron interaction. Compared with bare CoFe–PBAs (overpotential of 398 mV at 10 mA cm⁻² and Tafel slope of 78.35 mV dec⁻¹), the CoFe–PBAs/VN manifests a remarkably enhanced electrocatalytic activity for OER (lower overpotential of 290 mV at 10 mA cm⁻² and a smaller Tafel slope of 39.72 mV dec⁻¹), which is superior among PBAs and PBAs-derived materials reported as electrocatalysts for OER. Besides, this hybrid material behaves an excellent long-term durability. High conductivity of VN and electron interaction between VN and CoFe–PBAs contribute to the promoted catalytic performance. This study provides a novel strategy using VN substrates to support PBAs-based catalysts so as to obtain highly active and stable electrocatalysts towards practical applications.     

3D flower-like polypyrrole-derived N-doped porous carbon coupled cobalt oxide as efficient oxygen evolution electrocatalyst

For electrochemical splitting of water, highly active and non-precious metal electrocatalysts towards the oxygen evolution reaction (OER) are direly needed to address the cost and stability issues. Herein, polypyrrole (PPy) with 3D flower-like structure has been prepared to obtain N-doped porous carbon sheets (N–C) and to implant with cobalt oxides (Co₃O₄) via simple and cost-effective hydrothermal reaction. Benefitting from the 3D flower-like porous carbon structure, Co₃O₄/N–C demonstrates enlarged surface area replenished with more electrocatalytic active sites. What's more, Co₃O₄ nanoparticles are evenly dispersed onto the N-doped carbon surface which effectively prevents their aggregation and detachment. These exclusive structural features render amazing catalytic activity for Co₃O₄/N–C towards OER with an onset potential of ~1.31 V (vs RHE), low overpotential of 120 mV at 10 mA cm⁻² and a Tafel slope of only 33 mV dec⁻¹ in basic media. This work presents a simple approach to meet an ideal catalytic material with better morphology and advantageous properties for the possible energy and environmental applications.     

Aligned Co3O4–CoOOH heterostructure nanosheet arrays grown on carbon paper with oxygen vacancies for enhanced and robust oxygen evolution

Developing efficient and stable non-noble metal oxygen evolution reaction (OER) electrocatalysts for sustainable overall water-splitting is extremely desirable but still a great challenge. Herein, we developed a facile strategy to fabricate Co₃O₄–CoOOH heterostructure nanosheet arrays with oxygen vacancies grown on carbon paper (Co₃O₄–CoOOH/CP). Benefiting from the unique 3D architecture, large surface area, synergistic effects between Co₃O₄, CoOOH and oxygen vacancies, the obtained self-supporting Co₃O₄–CoOOH/CP presents excellent electrocatalytic OER activity (low overpotentials of 245 and 390 mV at 10 and 100 mA cm⁻²) and robust long-term stability in alkaline condition. The present strategy provides the opportunities for the future rational design and discovery of high-performance non-noble metal based electrocatalysts for advanced water oxidation and beyond.     

Accelerated oxygen evolution kinetics on NiFeAl-layered double hydroxide electrocatalysts with defect sites prepared by electrodeposition

NiFe layered double hydroxides (LDHs) is considered to be one of the LDHs electrocatalyst materials with the best electrocatalytic oxygen evolution properties. However, its poor conductivity and inherently poor electrocatalytic activity are considered to be the limiting factors inhibiting the electrocatalytic properties for oxygen evolution reaction (OER). The amorphous NiFeAl-LDHs electrocatalysts were prepared by electrodeposition with nickel foam as the support, and the D-NiFeAl-LDHs electrocatalyst with defect sites was then obtained by alkali etching. The mechanism of catalysts with defect sites in OER was analyzed. The ingenious defects can selectively accelerate the adsorption of OH⁻, thus enhancing the electrochemical activity. The D-NiFeAl-LDHs electrocatalyst had higher OER electrocatalytic activity than NiFe-LDHs electrocatalyst: its accelerated OER kinetics were mainly due to the introduction of iron and nickel defects in NiFeAl-LDHs nanosheets, which effectively adjusted the surface electronic structure and improved OER electrocatalytic performance. There was only a low overpotential of 262 mV with the current density of 10 mA cm⁻², and the Tafel slope was as low as 41.67 mV dec⁻¹. The OER electrocatalytic performance of D-NiFeAl-LDHs was even better than those of most of the reported NiFe-LDHs electrocatalysts.     

Tunable Fe/N co-doped 3D porous graphene with high density Fe-Nx sites as the efficient bifunctional oxygen electrocatalyst for Zn-air batteries

Nitrogen-doped transition metal materials display promising potential as bifunctional electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, Fe/N co-doped three-dimensional (3D) porous graphene (FeN-3D-PG) is prepared via a template method using sodium alginate as the carbon source and low polymerization degree melamine resin as the nitrogen source. The low polymerization degree melamine resin can form complexes with Fe³⁺ in the aqueous solution and further forms high density Fe-N_x active sites during pyrolysis. Meanwhile, the formed 3D porous structure efficiently promotes the uniform distribution of Fe-N_x active sites. The FeN-3D-PG catalyst exhibits pH-independent ORR activity. For OER, the catalyst possesses a low over potential (370 mV at 10 mA cm⁻²) in alkaline electrolyte. The Zn-air batteries (ZABs) using FeN-3D-PG as cathode exhibits a power density up to 212 mW cm⁻², a high specific capacity of 651 mAh g⁻¹, and the charge-discharge stability of 80 h. This work provides new sight to transition metal materials based ZABs with excellent performance.     

Zeolitic-imidazolate frameworks-derived Co3S4/NiS@Ni foam heterostructure as highly efficient electrocatalyst for oxygen evolution reaction

Transition metals sulfide-based nanomaterials have recently received significant attention as a promising cathode electrode for the oxygen evolution reaction (OER) due to their easily tunable electronic, chemical, and physical properties. However, the poor electrical conductivity of metal-sulfide materials impedes their practical application in energy devices. Herein, firstly nano-sized crystals of cobalt-based zeolitic-imidazolate framework (Co-ZIF) arrays were fabricated on nickel-form (NF) as the sacrificial template by a facile solution method to enhance the electrical conductivity of the electrocatalyst. Then, the Co₃S₄/NiS@NF heterostructured arrays were synthesized by a simple hydrothermal route. The Co-ZIFs derived Co₃S₄ nanosheets are grown successfully on NiS nanorods during the hydrothermal sulfurization process. The bimetallic sulfide-based Co₃S₄/NiS@NF-12 electrocatalyst demonstrated a very low overpotential of 119 mV at 10 mA cm^?2 for OER, which is much lower than that of mono-metal sulfide NiS@NF (201 mV) and ruthenium-oxide (RuO₂) on NF (440 mV) electrocatalysts. Furthermore, the Co₃S₄/NiS@NF-12 electrocatalyst showed high stability during cyclic voltammetry and chronoamperometry measurements. This research work offers an effective strategy for fabricating high-performance non-precious OER electrocatalysts.     

Composition-controlled chemical bath deposition of Fe-doped NiO microflowers for boosting oxygen evolution reaction

Water electrolysis for green hydrogen production is gaining tremendous attention in the quest towards sustainable energy sources. At the heart of water splitting technology are the electrocatalysts, which facilitate the two half-cell reactions, i.e., the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), with the latter being the most thermodynamically uphill. Herein, we managed to fabricate Ni_1-xFe_xO microflowers (μFs) with varying % of Fe doping (0 < x < 0.36) via an easy chemical bath deposition (CBD) method. The as-synthesized μFs drop-casted on graphene paper (GP) are then applied as electrocatalysts for OER. Compared to contrast catalysts, the electrocatalyst with x_Fe = 0.1 exhibits a lower overpotential of 297 mV at a current density of 10 mA cm⁻², Tafel slope of 44 mV dec⁻¹ and unprecedented turnover frequency of 4.6 s⁻¹ at 300 mV. It is believed that this remarkable electrochemical performance mainly stems from the synergistic effects of Ni and Fe species, working in harmony to enhance charge transfer kinetics and intrinsic activity of the catalyst. This work provides a promising avenue for developing cost-effective and highly active electrocatalysts as advanced electrodes for energy related applications.     

PBA derived FeCoP nanoparticles decorated on NCNFs as efficient electrocatalyst for water splitting

Transition metal phosphides have been known as promising electrocatalysts for hydrogen evolution and oxygen evolution reactions (HER and OER) due to their high catalytic activity. In this work, the FeCoP nanoparticles decorated on N-doped electrospun carbon nanofibers (FeCoP@NCNFs) was successfully synthesized through depositing Fe, Co-based Prussian blue analogue Co₃[Fe(CN)₆]₂·10H₂O (FeCo-PBA) onto the electrospun PVP/PAN nanofibers via layer-by-layer approach, followed by carbonization and phosphorization treatments. Benefiting from the high electrical conductivity, abundant catalytic active sites and the synergistic effect between FeCoP nanoparticles and N-doped carbon nanofibers network, the obtained FeCoP@NCNFs displays good bifunctional electrocatalytic activity. In 1 M KOH, the FeCoP@NCNFs achieves 10 mA cm^?2 at an overpotential of 290, 226 mV for OER and HER, respectively. Moreover, it demands overpotential of 196 mV to achieve 10 mA cm^?2 for HER in 0.5 M H₂SO₄. The FeCoP@NCNFs is used as both anode and cathode for overall water splitting, it requires a low voltage of 1.65 V to achieve a current density of 10 mA cm^?2 and maintains outstanding stability over 10 h. Herein, a strategy for preparing bifunctional electrocatalysts of compositing transition metal phosphides with carbon nanofibers is proposed, and the application of metal-organic framework in electrocatalytic field is further extended.     

Co3O4 nanoparticles decorated Polypyrrole/carbon nanocomposite as efficient bi-functional electrocatalyst for electrochemical water splitting

An effective bi-functional electrocatalyst of Co₃O₄/Polypyrrole/Carbon (Co₃O₄/Ppy/C) nanocomposite was prepared through a simple dry chemical method and used to catalyze the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Three types of carbon support as Vulcan carbon, reduced graphite oxide (RGO) and multi-walled carbon nanotubes (MCNTs) were used to study the influence on electrochemical reactions. Spherical shaped Co₃O₄ nanoparticles with 8–10 nm was found uniformly distributed on Ppy/C composite, which were analyzed by X-ray diffraction and transmission electron microscopy techniques. Amongst, Co₃O₄/Ppy/MWCNT shows improved bifunctional electrocatalytic activity towards both OER and HER with relatively low over potential (340 mV vs. 490 mV at 10 mA cm⁻²) and Tafel slope (87 vs. 110 mV dec⁻¹). In addition to that, MWCNT supported Co₃O₄/Ppy nanocomposite exhibits good electronic conductivity and electrochemical stability up to 2000 potential cycles. The results clearly indicate that the Co₃O₄/Ppy/MWCNT nanocomposite could be the promising bi-functional electrocatalyst for efficient water electrolysis.     

Ir-doped Co3O4 as efficient electrocatalyst for acidic oxygen evolution reaction

Oxygen evolution reaction (OER) is an important bottleneck for large-scale acidic water splitting applications due to its sluggish reaction kinetics. Therefore, the development of highly active, stable, and inexpensive electrocatalysts for OER remains a challenge. Herein, we develop the iridium doped Co₃O₄ (Ir–Co₃O₄) with low Ir content of 2.88 wt% for efficient acidic OER. Considering systemic characterizations, it is probably concluded that Ir can be uniformly doped into the lattice of Co₃O₄ and induce a certain distortion. The electrochemical results reveal that Ir–Co₃O₄ nanoparticles demonstrate significantly enhanced electrocatalytic OER activity and stability in 0.5 M H₂SO₄ solution compared with pure Co₃O₄, in which the overpotential at the current density of 10 mA cm⁻² decreases from 382 mV to 225 mV and the value of Tafel slope decreases from 101.7 mV dec⁻¹ to 64.1 mV dec⁻¹. Besides, Ir–Co₃O₄ exhibits excellent electrocatalytic durability for continuous 130 h's test without any activity attenuation. Moreover, this work provides a kind of high-performance acidic OER electrocatalyst for the development of hydrogen energy.     

Embedding Co2P nanoparticles into co-doped carbon hollow polyhedron as a bifunctional electrocatalyst for efficient overall water splitting

The reasonable design and construction of non-precious metal electrocatalysts with low cost and high performance is critical for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, a facile polymerization-pyrolysis method is proposed to encapsulate Co₂P nanoparticles in co-doped hollow carbon shell by using ZIF-67 and P-containing polymers as precursor. The unique construction not only effectively prevents nanoparticles from detaching, showing good stability after long-term testing, but also provides abundant active sites, large surface areas and large pore volumes, enabling the electrolyte and electrode material to full contact. As expected, the Co₂P/NPSC-800 performs superior HER performance with low overpotential of 173 mV at 10 mA cm⁻² and excellent stability of 88% retention for 35 h and OER performance with low overpotential of 320 mV at 10 mA cm⁻², which endows Co₂P/NPSC-800 with good catalytic activity in overall water splitting. Furthermore, density functional theory (DFT) calculations reveal that the metallic property and the decreased reaction barriers of Co₂P can promote the catalytic reactions. This work offers an effective route in synthesizing other transition metal phosphides with high catalytic properties.     

Vanadium-induced fragmentation of crystalline CoFe hydr(oxy)oxide electrocatalysts for enhanced oxygen evolution reaction

Transition metal hydr(oxy)oxides are one of the most efficient electrocatalysts towards oxygen evolution reaction (OER). However, structural-dependant and low stability severely hinder their overall performance and catalytic efficiency. Herein, we report the enhancement of OER activity via vanadium doping into the CoFe hydr(oxy)oxide electrocatalyst (denoted as CoFeV). Our results show that the incorporation of vanadium induces fragmentation of the polycrystalline structure of the CoFe hydr(oxy)oxide (CoFe) and transformation to a more active amorphous structure, greatly exposing the CoO and FeOOH active sites on the surface for OER. The optimised electrocatalyst exhibits an overpotential of 376 mV to reach a current density of 10 mA cm⁻² and requires a small Tafel slope of 26 mV dec⁻¹ for OER in alkaline media. These results illustrate that vanadium doping can efficiently improve the catalytic activity of CoFeV which can be extended to other vanadium-doped transition metal hydr(oxy)oxides as promising electrocatalysts for OER applications.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

Heterostructural Co/CeO2/Co2P/CoP@NC dodecahedrons derived from CeO2-inserted zeolitic imidazolate framework-67 as efficient bifunctional electrocatalysts for overall water splitting

The design and fabrication of highly active, robust and cost-efficient electrocatalysts for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of great significance towards overall water splitting, but remains challenging as well. Herein, we report, for the first time, heterostructural Co/CeO₂/Co₂P/CoP@NC dodecahedrons as bifunctional electrocatalyst, in which abundant interfaces are formed between different components. Typical ZIF-67 (ZIF = zeolitic imidazolate framework) dodecahedrons with pre-inserted CeO₂ nanowires were selected as precursors to synthesize Co/CeO₂/Co₂P/CoP@NC via a direct carbonization process followed by phosphidation, simultaneously generating the strong coupled heterojunction interfaces through interactions between CeO₂ and Co_xP species. Abundant porous structure leads to the exposure of more active sites and the carbon encapsulation of nanodomains sustains the high robustness and conductivity and the synergistic effect between the multi-components heterostructure. Benefiting from the above collective advantages, the Co/CeO₂/Co₂P/CoP@NC electrocatalysts exhibit small overpotentials of 307 and 195 mV to derive 10 mA cm⁻² for OER and HER, respectively. Furthermore, an alkaline electrolyzer assembled by using Co/CeO₂/Co₂P/CoP@NC as both cathode and anode can achieve a current density of 10 mA cm⁻² at a low voltage of 1.76 V and work continuously for over 15 h. This work would provide a rational protocol for fabrication multi-phase interface enriched electrocatalysts toward highly efficient energy conversion.