Hydrogen key technology to cover the energy storage needs of NEOM City

NEOM City is supposed to be a renewable-energy-only city in Saudi Arabia. The project has planned a huge capacity of non-dispatchable wind and solar photovoltaic but has not addressed yet the issue of a long time, large storage of energy. Battery energy storage is the only product off-the-shelf, and we know already only works for the storage of small amounts of energy over short time frames. The other solutions for energy storage are not off-the-shelf products, but in many cases, only nice ideas to be proven workable. The only other opportunity to make NEOM a truly renewable-energy-only City today is to use the extra wind and solar photovoltaic power to produce hydrogen through electrolyzers, and then partially use this hydrogen to produce the missing electricity to stabilize the grid, and export the excess hydrogen. Adopting extra wind and solar photovoltaic to make NEOM a hydrogen production hub in addition to a renewable-energy-only city is an even more attractive proposition. As NEOM has not fully acknowledged this issue, same as the scientific community, the most likely solution without an urgent debate within the scientific community will be to import electricity from the combustion of hydrocarbon fuels while paying carbon credits, with is inconsistent with the renewable-energy-only aspiration.     

Wind energy and the hydrogen economy—review of the technology

The hydrogen economy is an inevitable energy system of the future where the available energy sources (preferably the renewable ones) will be used to generate hydrogen and electricity as energy carriers, which are capable of satisfying all the energy needs of human civilization. The transition to a hydrogen economy may have already begun. This paper presents a review of hydrogen energy technologies, namely technologies for hydrogen production, storage, distribution, and utilization. Possibilities for utilization of wind energy to generate hydrogen are discussed in parallel with possibilities to use hydrogen to enhance wind power competitiveness.     

Modeling of hydrogen and electrical energy storages in wind/PV energy system on the Lake Baikal coast

The paper presents a research on a green power supply system (producing no carbon dioxide and other harmful emissions) in the area of Baikal Lake, for the maximum loads of 10 kW and 100 kW. The system includes photovoltaic converters, wind turbines, batteries for electric energy storage and a system for hydrogen production, storage and energy use. Calculations based on the optimization mathematical model demonstrated the efficiency of the combined use of wind and solar energy in the considered areas, as well as the simultaneous storage of electric energy and hydrogen. The electric energy storage is most efficient for short-term time intervals whereas an increase in the duration of continuous energy “standstills” up to several days makes the storage of hydrogen more cost-effective.     

HIES: Cases for hydrogen energy and I-Energy

With the increasing demand for electricity, more and more fossil fuels are used to generate electricity which leads to energy shortage and environmental pollution. Therefore, using Renewable Energy Sources (RESs) and developing sustainable smart grid have become a common global priority: Since RESs, like solar and wind energy, are inherently unstable, hydrogen energy, as a completely clean new energy, has received widespread attention: I-Energy, which combines information and energy, is a new research direction in smart grid. Furthermore, the household electricity usage accounts for 41% of the total power consumption. Therefore, Household Intelligent Electricity System (HIES), combining hydrogen energy and i-Energy, becomes smart solutions. In this paper, we review the scientific literature for hydrogen energy and i-Energy on HIES, including recognition of electricity appliances, establishment of power consumption model, human activity analysis, smart interactive terminal, home energy management system, distributed power supply and district coordinated power utilization. Finally, we summarize the challenges and give the solutions concerning HIES, and this work can give a useful reference to new energy used model and environment protection.     

Monitoring and control of a hydrogen production and storage system consisting of water electrolysis and metal hydrides

Renewable energy sources such as wind turbines and solar photovoltaic are energy sources that cannot generate continuous electric power. The seasonal storage of solar or wind energy in the form of hydrogen can provide the basis for a completely renewable energy system. In this way, water electrolysis is a convenient method for converting electrical energy into a chemical form. The power required for hydrogen generation can be supplied through a photovoltaic array. Hydrogen can be stored as metal hydrides and can be converted back into electricity using a fuel cell. The elements of these systems, i.e. the photovoltaic array, electrolyzer, fuel cell and hydrogen storage system in the form of metal hydrides, need a control and monitoring system for optimal operation. This work has been performed within a Research and Development contract on Hydrogen Production granted by Solar Iniciativas Tecnológicas, S.L. (SITEC), to the Politechnic University of Valencia and to the AIJU, and deals with the development of a system to control and monitor the operation parameters of an electrolyzer and a metal hydride storage system that allow to get a continuous production of hydrogen.     

Energy storage in the UK electrical network: Estimation of the scale and review of technology options

This paper aims to clarify the difference between stores of energy in the form of non-rechargeable stores of energy such as fossil-fuels, and the storage of electricity by devices that are rechargeable. The existing scale of these two distinct types of storage is considered in the UK context, followed by a review of rechargeable technology options. The storage is found to be overwhelmingly contained within the fossil-fuel stores of conventional generators, but their scale is thought to be determined by the risks associated with long supply chains and price variability. The paper also aims to add to the debate regarding the need to have more flexible supply and demand available within the UK electrical network in order to balance the expected increase of wind derived generation. We conclude that the decarbonisation challenge facing the UK electricity sector should be seen not only as a supply and demand challenge but also as a storage challenge.     

Hydrogen energy storage systems to improve wind power plant efficiency considering electricity tariff dynamics

One of the limitations of the efficiency of renewable energy sources is the stochastic nature of generation; consequently, it is necessary to use high-capacity energy storage systems such as hydrogen storage for its integration into existing power networks. At the same time, electricity market tariffs for large enterprises change during the day. Therefore, it can be assumed that storing energy during cheaper hours and usage in more expensive hours allows increasing the efficiency of renewable energy sources. Evaluation of the economic efficiency of an energy storage system requires simulation with a step of at least 1 h for several years since the use of averaged production volume and averaged electricity tariffs will not allow obtaining an adequate to the task accuracy. A simulation model and software have been implemented to perform simulations and calculate the economic efficiency of a wind turbine with and without a hydrogen storage device. The methodology has been approved on three-year real data of wind speeds and electricity tariffs in the Novosibirsk region and Krasnodar Territory (Russian Federation).     

Performance analysis of various hybrid renewable energy systems using battery,hydrogen, and pumped hydro‐based storage units

The aim of this research is to analyze the techno‐economic performance of hybrid renewable energy system (HRES) using batteries, pumped hydro‐based, and hydrogen‐based storage units at Sharurah, Saudi Arabia. The simulations and optimization process are carried out for nine HRES scenarios to determine the optimum sizes of components for each scenario. The optimal sizing of components for each HRES scenario is determined based on the net present cost (NPC) optimization criterion. All of the nine optimized HRES scenarios are then evaluated based on NPC, levelized cost of energy, payback period, CO₂ emissions, excess electricity, and renewable energy fraction. The simulation results show that the photovoltaic (PV)‐diesel‐battery scenario is economically the most viable system with the NPC of US$2.70 million and levelized cost of energy of US$0.178/kWh. Conversely, PV‐diesel‐fuel cell system is proved to be economically the least feasible system. Moreover, the wind‐diesel‐fuel cell is the most economical scenario in the hydrogen‐based storage category. PV‐wind‐diesel‐pumped hydro scenario has the highest renewable energy fraction of 89.8%. PV‐wind‐diesel‐pumped hydro scenario is the most environment‐friendly system, with an 89% reduction in CO₂ emissions compared with the base‐case diesel only scenario. Overall, the systems with battery and pumped hydro storage options have shown better techno‐economic performance compared with the systems with hydrogen‐based storage.     

Matching Western US electricity consumption with wind and solar resources

The variability of wind and solar is perceived as a major obstacle in employing otherwise abundant renewable energy resources. On the basis of the available geographically dispersed data for the Western USA, we analyze to what extent the geographic diversity of these resources can offset their variability. We determine the best match to loads in the western portion of the USA that can be achieved with wind power and photovoltaics (PV) with no transmission limitations. Without storage and with no curtailment, wind and PV can meet up to 50% of loads in Western USA. It is beneficial to build more wind than PV mostly because the wind contributes at night. When storage is available, the optimal mix has almost 75% as much nominal PV capacity as wind, with the PV energy contribution being 32% of the electricity produced from wind. With only 10 GW of storage (twice the pumped hydro storage capacity that already exists in the Western Electric Coordinating Council), up to 82% of the load can be matched with wind and PV, while in the same time curtailing just 10% of the renewable energy throughout the year. Copyright © 2012 John Wiley & Sons, Ltd.     

Overview of energy storage systems for storing electricity from renewable energy sources in Saudi Arabia

Renewable power (photovoltaic, solar thermal or wind) is inherently intermittent and fluctuating. If renewable power has to become a major source of base-load dispatchable power, electricity storage systems of multi-MW capacity and multi-hours duration are indispensable. An overview of the advanced energy storage systems to store electrical energy generated by renewable energy sources is presented along with climatic conditions and supply demand situation of power in Saudi Arabia. Based on the review, battery features needed for the storage of electricity generated from renewable energy sources are: low cost, high efficiency, long cycle life, mature technology, withstand high ambient temperatures, large power and energy capacities and environmentally benign. Although there are various commercially available electrical energy storage systems (EESS), no single storage system meets all the requirements for an ideal EESS. Each EESS has a suitable application range.     

Hydrogen storage and demand to increase wind power onto electricity distribution networks

An optimal power flow (OPF) methodology is developed to investigate the provision of a demand hydrogen as a means to maximise wind power generation in relation to a constrained electricity network. The use of excess wind energy to generate hydrogen for use as a transport fuel is investigated. Hydrogen demand is included in the objective function of the OPF, and a techno-economic analysis is presented. We conclude that using this method to generate hydrogen increases the utilisation of wind energy and allows for a hydrogen demand to be met at or near to the point of use. The OPF algorithm that has been developed optimises the amount of wind energy utilised, as well as minimising the amount of hydrogen demand not met. The cost at which the hydrogen is produced was found to be dependent on the operating methodology, component capital investment costs, level of hydrogen demand, and storage constraint.     

Large-scale compressed hydrogen storage as part of renewable electricity storage systems

Storing energy in the form of hydrogen is a promising green alternative. Thus, there is a high interest to analyze the status quo of the different storage options. This paper focuses on the large-scale compressed hydrogen storage options with respect to three categories: storage vessels, geological storage, and other underground storage alternatives. In this study, we investigated a wide variety of compressed hydrogen storage technologies, discussing in fair detail their theory of operation, potential, and challenges. The analysis confirms that a techno-economic chain analysis is required to evaluate the viability of one storage option over another for a case by case. Some of the discussed technologies are immature; however, this does not rule out these technologies; rather, it portrays the research opportunities in the field and the foreseen potential of these technologies. Furthermore, we see that hydrogen would have a significant role in balancing intermittent renewable electricity production.     

Production of hydrogen for export from wind and solar energy,natural gas,and coal in Australia

Hydrogen production for export to Japan and Korea is increasingly popular in Australia. The theoretically possible paths include the use of the excess wind and solar energy supply to the grid to produce hydrogen from natural gas or coal. As a contribution to this debate, here I discuss the present contribution of wind and solar to the electricity grid, how this contribution might be expanded to make a grid wind and solar only, what is the energy storage needed to permit this supply, and what is the ratio of domestic total primary energy supply to electricity use. These factors are required to determine the likeliness of producing hydrogen for export. The wind and solar energy capacity, presently at 6.7 and 11.4 GW, have to increase almost 8 times up to values of 53 and 90 GW respectively to support a wind and solar energy only electricity grid for the southeast states only. Additionally, it is necessary to build-up energy storage of actual power >50 GW and stored energy >3000 GW h to stabilize the grid. If the other states and territories are considered, and also the total primary energy supply (TPES) rather than just electricity, the wind and solar capacity must be increased of a further 6–8 times. It is concluded that it is extremely unlikely that hydrogen for export could be produced from the splitting of the water molecule by using excess wind and solar energy, and it is very unlikely that wind and solar may fully cover the local TPES needs. The most likely scenario is production hydrogen via syngas from either natural gas or coal. Production from natural gas and coal needs further development of techniques, to include CO₂ capture, a way to reuse or store CO₂, and finally, the better energy efficiency of the conversion processes. There are several challenges for using natural gas or coal to produce hydrogen with near-zero greenhouse gas emissions. Carbon capture, utilization, and storage technologies that ensure no CO₂ is released in the production process, and new technologies to separate the oxygen from the air, and in case of natural gas, the water, and the CO₂ from the combustion products, are urgently needed to make sense of the fossil fuel hydrogen production. There is no benefit from producing hydrogen from fossil fuels without addressing the CO₂ issue, as well as the fuel energy penalty issue during conversion, that is simply translating in a net loss of fuel energy with the same CO₂ emission.     

Prospects and economic feasibility analysis of wind and solar photovoltaic hybrid systems for hydrogen production and storage: A case study of the Brazilian electric power sector

The work aims to verify the economic feasibility of renewable hybrid systems for hydrogen production and storage in the Brazilian electric power sector. The methodology applied is based on economic cost analyses of the two largest wind and solar photovoltaic plants in the country. As a result, the number of hours of electricity available for hydrogen production directly influences its cost. However, fully dedicated plants to produce green hydrogen have shown economically feasible to the exporter or other sectors, being trading hydrogen is more profitable than transforming it back into power. The model also concludes that wind and solar hybrid systems for hydrogen production and storage are still not economically viable in Brazil. The CAPEX of electrolysers and their operating losses are still very significant. Finally, hydrogen production and storage become economically feasible only from plants operating above 3000 h and for electrolysers with a CAPEX of USD 650/kWe.     

Hydrogen storage for off-grid power supply

The use of intermittent renewable energy sources for power supply to off-grid electricity consumers depends on energy storage technology to guarantee continuous supply. Potential applications of storage-guaranteed systems range from small installations for remote telecoms, water-pumping and single dwellings, to farms and whole communities for whom grid connection is too expensive or otherwise infeasible, to industrial, military and humanitarian uses. In this paper we explore some of the technical issues surrounding the use of hydrogen storage, in conjunction with a PEM electrolyser and PEM fuel cell, to guarantee electricity supply when the energy source is intermittent, most typically solar photovoltaic. We advocate metal-hydride storage and compare its energy density to that of Li-ion battery storage, concluding that a significantly smaller package is possible with metal-hydride storage. A simple approach to match the output of a photovoltaic array to an electrolyser is presented. The properties required for the metal-hydride storage material to interface the electrolyser to the fuel cell are discussed in detail. It is concluded that relatively conventional Mischmetal-based AB₅ alloys are suitable for this application.     

Optimizing hydrogen production capacity and day ahead market bidding for a wind farm in Texas

Producing green hydrogen from wind energy is one potential method to mitigate curtailment. This study develops a general approach to examine the economic benefit of adding hydrogen production capacity through water electrolysis along with the fuel cell and storage facilities in a wind farm in north Texas. The study also investigates different day ahead market bidding strategies in the existence of these technologies. The results show that adding hydrogen capacity to the wind farm is profitable when hydrogen price is greater than $3.58/kg, and that the optimal day ahead market bidding strategy changes as hydrogen price changes. The results also suggest that both the addition of a fuel cell to reconvert stored hydrogen to electricity and the addition of a battery to smooth the electricity input to the electrolyzer are suboptimal for the system in the case of this study. The profit of a particular bidding scenario is most sensitive to the selling price of hydrogen, and then the input parameters of the electrolyzer. This study also provides policy implications by investigating the impact of different policy schemes on the optimal hydrogen production level.     

Design of hybrid power-to-power systems for continuous clean PV-based energy supply

The increasing penetration of intermittent renewable sources, fostering power sector decarbonization, calls for the adoption of energy storage systems as an essential mean to improve local electricity exploitation, reducing the impact of distributed power generation on the electric grid. This work compares the use of hydrogen-based Power-to-Power systems, battery systems and hybrid hydrogen-battery systems to supply a constant 1 MW_el load with electricity locally generated by a photovoltaic plant. A techno-economic optimization model is set up that optimizes the size and annual operation of the system components (photovoltaic field, electrolyzer, hydrogen storage tanks, fuel cell and batteries) with the objective of minimizing the annual average cost of electricity, while guaranteeing an imposed share of local renewable self-generation. Results show that, with the present values of investment costs and grid electricity prices, the installation of an energy storage system is not economically attractive by itself, whereas the installation of PV panels is beneficial in terms of costs, so that the baseline optimal solution consists of a 4.2 MW_p solar field capable to self-generate 33% of the load annually. For imposed shares of self-generation above 40%, decoupling generation and consumption becomes necessary. The use of batteries is slightly less expensive than the use of hydrogen storage systems up to a 92% self-generation rate. Above this threshold, seasonal storage becomes predominant and hybrid storage becomes cheaper than batteries. The sale of excess electricity is always important to support the plant economics, and a sale price reduction sensibly impacts the results. Hydrogen storage becomes more competitive when the need for medium and long terms energy shift increases, e.g. in case of having a cap on the available PV capacity.     

Large-scale hydrogen energy storage in salt caverns

Large-scale energy storage methods can be used to meet energy demand fluctuations and to integrate electricity generation from intermittent renewable wind and solar energy farms into power grids. Pumped hydropower energy storage method is significantly used for grid electricity storage requirements. Alternatives are underground storage of compressed air and hydrogen gas in suitable geological formations. Underground storage of natural gas is widely used to meet both base and peak load demands of gas grids. Salt caverns for natural gas storage can also be suitable for underground compressed hydrogen gas energy storage. In this paper, large quantities underground gas storage methods and design aspects of salt caverns are investigated. A pre-evaluation is made for a salt cavern gas storage field in Turkey. It is concluded that a system of solar-hydrogen and natural gas can be utilised to meet future large-scale energy storage requirements.     

Design and analysis of stand-alone hydrogen energy systems with different renewable sources

One of the most interesting developments of energy systems based on the utilization of hydrogen is their integration with renewable sources of energy (RES). In fact, hydrogen can operate as a storage and carrying medium of these primary sources. The design and operation of the system could change noticeably, depending on the type and availability of the primary source. In this paper, the results obtained considering a model of a stand-alone energy system supplied just with RES and composed by an electrolyzer, a hydrogen tank and a proton exchange membrane fuel cell are exposed. The energy systems have been designed in order to supply the electricity needs of a residential user in a mountain environment in Italy during a complete year. Three different sources have been considered: solar irradiance (transformed by an array of photovoltaic modules), hydraulic energy (transformed by a micro-hydro turbine in open-flume configuration) and wind speed (transformed by a small-size wind generator). It has been checked that, in that specific location, it is absolutely not convenient to use the wind source; the solar irradiance has a nearly constant availability during the year, and therefore the seasonal storage of the RES in form of hydrogen is the lowest; the availability of the micro-hydro source is less constant than in case of solar irradiance, requiring a higher hydrogen seasonal storage, but its advantage is linked to the higher efficiency of the turbine and the fact that the RES is directly sent to the user with high frequency (for these reasons it is the best plant option).