g-C3N4 particles with boron and oxygen dopants/carbon vacancies for efficient dehydrogenation in sodium borohydride methanolysis

In the study, metal-free boron and oxygen incorporated graphitic carbon nitride (B and O doped g-C₃N₄) with carbon vacancy was successfully prepared and applied as a catalyst to the dehydrogenation of sodium borohydride (NaBH₄) in methanol for the first time. The hydrogen generation rate (HGR) value was found to be 11,600 mL min^?1g^?1 by NaBH₄ of 2.5%. This is 2.53 times higher than the g-C₃N₄ catalyst without the addition of B and O. The obtained activation energy was 25.46 kJ mol^?1. X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning electron microscopy (SEM), energy dispersive X-Ray analyser (EDX), Transmission electron microscopy (TEM) and Fourier-transform infrared spectroscopy (FTIR) analyses for characterization were performed. A possible mechanism of H₂ production from the reaction using metal-free B and O doped g-C₃N₄ catalyst with carbon vacancy has been proposed. This study showed that g-C₃N₄ and its composites with doping atoms can be used effectively in H₂ production by NaBH₄ methanolysis.     

Oxygen and nitrogen-doped metal-free microalgae carbon nanoparticles for efficient hydrogen production from sodium borohydride in methanol

Here, the oxygen(O) and nitrogen(N) doped metal-free carbon synthesis including potassium hydroxide (KOH) activation of Spirulina Platensis microalgae, followed by nitric acid (HNO₃) activation is reported for the first time. Oxygen and nitrogen-doped metal-free catalysts were investigated for efficient hydrogen (H₂) production from methanolysis of sodium borohydride (NaBH₄). Compared to the catalyst obtained with the KOH activation, the catalytic activity for O and N doped metal-free showed about a four-fold improvement. The catalysts were analysed by scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffractometer (XRD), nitrogen adsorption, elemental analysis and Fourier-transform infrared spectroscopy (FTIR). The effects of temperature, NaBH₄ amounts, catalyst loading and reusability experiments on the catalytic performance of obtained metal-free catalysts by H₂ release from NaBH₄ methanolysis were performed. This study can provide a new alternative strategy to produce specific metal-free carbon catalysts doped heteroatom for environmentally friendly conversion to produce H₂ efficiently.     

Metal-free catalyst fabrication by incorporating oxygen groups on the surface of the carbonaceous sample and efficient hydrogen production from NaBH4 methanolysis

In the present study, metal-free catalysts for efficient H₂ generation from NaBH₄ methanolysis was produced for the first time from apricot kernel shells with two-step activation. The first stage of the two-stage activation includes the production of activated carbon with the KOH agent (AKOH), and the second stage includes hydrothermally HNO₃ activation with oxygen doping (O doped AKOH + N). The hydrogen production rate (HGR) and the activation energy (Ea) of the reaction with the obtained metal-free catalyst (10 mg) were determined as 14,444 ml min^?1 g^?1 and 7.86 kJ mol^?1, respectively. The structural and physical-chemical properties of these catalysts were characterized by XRD (X-ray diffraction), SEM (scanning electron microscopy), elemental CHNS analysis, FT-IR (Fourier transform infrared spectroscopy), and nitrogen adsorption analysis. Also, the reusability results of this metal-free catalyst for H₂ production are promising.     

Phosphorus doped carbon nanodots particles based on pomegranate peels for highly active dehydrogenation of sodium borohydride in methanol

Here, the carbon nanodots were successfully synthesized from pomegranate peels (PPCD). This obtained PPCD was treated by a hydrothermal process with phosphoric acid for P doping (P doped PPCD) and used as a metal-free catalyst to obtain hydrogen(H₂) from sodium borohydride (NaBH₄) methanolysis for the first time. The characteristics of the samples obtained by ultraviolet, fluorescence, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Transmission electron microscopy (TEM) and Inductively coupled plasma mass spectrometry (ICP-MS) analyses were examined. NaBH₄ concentration effect, temperature effect and catalyst reusability experiments were carried out. Using 10 mg of the catalyst with 2.5% NaBH₄, an HGR value of 13000 mL min^?1g^?1 was obtained. The activation energy (Ea) for the P-doped PPCD catalyst was 30.96 kJ mol^?1.     

Phosphorus and oxygen doped carbon-based on Spirulina microalgae as efficient metal-free catalysts to obtain H2 from methanolysis of NaBH4

Metal-free catalysts (SP–KOH–P) doped phosphorus and oxygen as a result of modification with H₃PO₄ to the surface of the activated carbon sample (SP–KOH) obtained by activation of KOH with Spirulina microalgae were used to obtain hydrogen (H₂) from methanolysis of NaBH₄. The characteristic structure of SP-KOH-P and SP-KOH metal-free catalysts were examined by XRD, TEM, elemental analysis, FTIR, and ICP-MS. The effects of the amount of catalyst, NaBH₄ concentration, reusability, and temperature on H₂ production rate from NaBH₄ methanolysis reaction were investigated. The hydrogen production rate (HGR) obtained with 25 mg SP-KOH-P was found to be 19,500 mL min^?1 g^?1. The activation energy (Ea) value of SP-KOH-P metal-free catalyst sample was calculated as 38.79 kJ mol^?1.     

Sulphur and nitrogen-doped metal-free microalgal carbon catalysts for very active dehydrogenation of sodium borohydride in methanol

Micro algae based on Spirulina platensis is successfully used for the synthesis of S and N-doped metal-free carbon materials. The procedure consists of three stages; (i) Activated carbon production by KOH activation in CO₂ atmosphere (S-AC), (ii) S atom doping to the obtained S-AC using sulphuric acid by hydrothermal activation (S-AC-S), (iii) N atom doping by hydrothermal activation to S-AC obtained using nitric acid (S-AC-S-N). The S and N doped metal-free catalysts are used for H₂ release in NaBH₄ methanolysis reaction (NaBH₄-MR) for the first time. The metal-free carbon catalysts are characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM-EDS), X-ray diffractometer spectroscopy (XRD), Fourier-transform infrared spectroscopy (FTIR), nitrogen adsorption and elemental analysis (CHNS) methods. When the HGR values obtained for S-AC-S-N (26,000 mL min^?1 g^?1) and S-AC (2641 mL min^?1 g^?1) are compared, there is a 9.84-fold increase. Activation energy (Ea) value for S-AC-S-N was 10.59 kJ mol^?1.     

Surface modification of graphitic carbon nitride nanoparticles with B,O and S doping/carbon vacancy for efficient dehydrogenation of sodium borohydride in methanol

Herein, the surface properties of graphitic carbon nitride (GCN) with sulphur(S), boron (B) and oxygen (O) dopants were improved. The heteroatom-doped metal-free GCN exhibited both rich surface functional groups and a carbon defect structure. These metal-free catalysts were used to obtain hydrogen (H₂) from the sodium borohydride (SB) methanolysis for the first time. Compared to GCN, S, B, and O doped GCN catalyst obtained showed a 2.2-fold improvement in H₂ production. HGR value obtained with B, O and S doped GCN (10 mg) via SB of 2.5% was 9166 ml min ⁻¹g⁻¹. XPS, SEM-EDX, TEM, FTIR, and XRD analyses were used for the structural properties of catalysts. The activation energy (Ea) for B, O and S doped GCN was 28.89 kJ mol⁻¹.     

Metal-free catalysts with phosphorus and oxygen doped on carbon-based on Chlorella Vulgaris microalgae for hydrogen generation via sodium borohydride methanolysis reaction

Metal-free catalysts (C–KOH–P) containing phosphorus (P) and oxygen (O) prepared by the modification with phosphoric acid (H₃PO₄) of activated carbon (C–KOH) obtained by activation of Chlorella Vulgaris microalgae with potassium hydroxide (KOH) were investigated for the hydrogen (H₂) generation reaction from methanolysis of sodium borohydride (NaBH₄). Elemental analysis, XRD, FTIR, ICP-MS, and nitrogen adsorption were used to analyze the characteristics of metal-free catalysts. The results showed that groups containing O and P were attached to the carbon sample. In the study, the hydrogen production rates (HGR) obtained with metal-free C–KOH and C–KOH–P catalysts were 3250 and 10,263 mL/min/g, respectively. These HGR values are better than most values obtained for many catalysts presented in the literature. Besides, relatively low activation energy (Ea) of 27.9 kJ/mol was obtained for this metal-free catalyst. The C–KOH–P metal-free catalyst showed ideal reusability with 100% conversion and a partial reduction in the H₂ production studies of NaBH₄ methanolysis after five consecutive uses.     

Evaluating organic waste sources (spent coffee ground) as metal-free catalyst for hydrogen generation by the methanolysis of sodium borohydride

In this study, organic waste sources (spent coffee ground (SCG)) is used as metal-free catalyst in comparison with conventional noble-metal catalyst materials for hydrogen generation based on the methanolysis of sodium borohydride solution. Spent coffee ground (SCG) is used as a metal-free catalyst for the first time as treated with different chemicals. The aim is to synthesize the metal-free catalyst that can be used for the production of hydrogen, a renewable energy source. SCG, which was collected from coffee shops, was used for preparing the catalyst. To produce hydrogen by sodium borohydride (NaBH₄) methanolysis, SCG is pretreated with different chemical agents (H₃PO₄, KOH, ZnCl₂). According to the acid performances, the choice of phosphoric acid was evaluated at different mixing ratios (10%, 20%, 30%, 40%, 50%, 100%) (w/w), different temperatures (200, 300 and 400 °C) and burning times (30, 45, 60 and 90 min) for the optimization of SCG-catalyst. A detailed characterization of the samples were carried out with the aid of FTIR, SEM, XRD and BET analysis. In this study, the experiments were generally carried out effectively under ambient temperature conditions in10 ml methanol solution containing 0.025 g NaBH₄ and 0.1 g of the catalyst. The hydrogen obtained in the experimental studies was determined volumetrically by the gas measurement system. When evaluating the hydrogen volume, different NaBH₄ concentrations, catalyst amount and different temperature effects were investigated. The effect of the amount of NaBH₄ was investigated with 1%, 2.5%, 5%, and 7.5% ratio of NaBH₄ while the influence of the concentration of catalyst was carried-out at 0.05, 0.1, 0.15, and 0.25 g catalysts. Four different temperatures were tested (20, 30, 40, 50 and 60 °C) to explore the performance of the catalyst under different temperatures. The experiments by using SCG-catalyst treated with H₃PO₄ reveal that the best acid ratio was 100% H₃PO₄. The maximum hydrogen production rate with the use of SCG-catalyst for the methanolysis of NaBH₄ was found to be 8335.5 mL min⁻¹gcat⁻¹. Also, the activation energy was determined to be 9.81 kJ mol⁻¹. Moreover, it was discovered that there was no decline in the percentage of converted catalyst material.     

Very efficient dehydrogenation of methanolysis reaction with nitrogen doped Chlorella Vulgaris microalgae carbon as metal-free catalysts

In this study, nitrogen (N) doped metal-free catalysts were obtained as a result of nitric acid (HNO₃) activation of carbon sample (C–KOH–N), which was obtained based on Chlorella Vulgaris microalgae by KOH activation (C–KOH). These catalysts have been effectively used to produce hydrogen (H₂) from the sodium borohydride (NaBH₄) methanolysis reaction. Compared to the C–KOH catalyst, the catalytic activity for C–KOH–N showed a seven-fold improvement. Hydrogen generation rate (HGR) values obtained for the NaBH₄ methanolysis reaction for C–KOH and C–KOH–N metal-free catalysts were 3250 and 20,100 mL min^?1 g^?1. The catalysts were characterized using various analytical techniques such as XPS, XRD, SEM, FTIR, BET, and elemental analysis. This work can provide a new alternative strategy to produce specific heteroatom-doped metal-free carbon catalysts for environmentally friendly conversion to produce H₂ efficiently.     

Performance of g-C3N4 nanoparticles by EDTA modification and protonation for hydrogen release from sodium borohydride methanolysis

Here, for the first time, a metal-free catalyst was synthesized by ethylenediamine tetra-acetic acid (EDTA) modification of the carbon nitride (g-C₃N₄) sample and protonation of the obtained sample. The catalyst was used for the production of H₂ from the methanolysis of sodium borohydride (NaBH₄). The EDTA modification and protonation of the g-C₃N₄ sample was confirmed by XRD, FTIR, SEM-EDX, and TEM analyses. During the hydrogen generation, NaBH₄ concentration effect, catalyst amount effect, temperature effect and catalyst reusability were investigated. The HGR value obtained with 2.5% NaBH₄ using 10 mg catalyst was 7571 mL min^?1g^?1. The activation energy (Ea) for the g–C₃N₄–EDTA-H catalyst was found to be 32.2 kJ mol^?1 The reusability of the g–C₃N₄–EDTA-H catalyst shows a catalytic performance of 72% even after its fifth use.     

A novel hazelnutt bagasse based activated carbon as sodium borohydride methanolysis and electrooxidation catalyst

In this study, activated carbon is produced from defatted hazelnut bagasse at different activation conditions. The catalytic activities of activated carbons are evaluated for NaBH₄ methanolysis and electrooxidation. These materials are characterized by N₂ adsorption-desorption, FTIR, SEM-EDS and XPS and results show that these materials are prepared successfully. N₂ adsorption-desorption results reveal that activated carbon (FH3-500) has the highest BET surface area as 548 m²/g, total pore volume as 0.367 cm³/g and micropore volume as 0.205 cm³/g. On the orher hand, as a result of hydrogen production studies, FH3-500 activated carbon catalyst has the highest initial hydrogen production rate compared to other materials. At 50 °C, this metal-free activated carbon catalyst has a high initial hydrogen production rate of 13591.20 mL/min.g_cat, which is higher than literature values. Sodium borohydride electrooxidation measurements reveal that FH2-500 also has the highest electrocatalytic activity and stability. Hazelnut pulp-based activated carbons are firstly used as a metal-free catalyst in the methanolysis and electrooxidation of sodium borohydride, and its catalytic activity is good as a metal-free catalyst. The results show that the hazelnut pulp-based activated carbon catalyst is promising as a metal-free catalyst for the methanolysis and electrooxidation of sodium borohydride.     

Production of metal-free catalyst from defatted spent coffee ground for hydrogen generation by sodium borohyride methanolysis

In the present study, defatted spent coffee ground (DSCG) treated with different acids was used as a metal-free catalyst for the first time. The aim of undertaken work is to demonstrate that DSCG can be used as a green catalyst to produce hydrogen through methanolysis of sodium borohydride. To produce hydrogen by the sodium borohydride methanolysis (NaBH₄), DSCG was pretreated with different acids (HNO₃, CH₃COOH, HCl). According to the superior acid performance, acetic acid was selected and then different concentrations of the chosen acid were evaluated (1M, 3M, 5M, and 7M). Subsewuently, different temperatures (200, 300, 400 and 500 °C) and burning times (30, 45, 60 and 90 min) for the optimization of DSCG-catalyst were tested. The experiments with the use of CH₃COOH treated DSCG-catalyst reveal that the optimal acid concentration was 1M CH₃COOH and the burning temperatures and time were 300 °C and 60 min, respectively. FTIR, SEM, ICP-MS and CHNS elemental analysis were carried out for a through characterization of the catalyst samples. In this study, the experiments were carried out with 10 ml methanol solution contained 0.025 g NaBH₄ with 0.1 g catalyst at 30 °C unless otherwise stated. The effect of NaBH₄ concentration was investigated with use of 1%, 2.5%, 5%, and 7.5% NaBH₄, while the influence of catalyst concentration was discovered with the use of 0.05, 0.1, 0.15, and 0.25 g catalyst. Different temperatures were chosen (30, 40, 50 and 60 °C) to explore the hydrogen production performance of the catalyst. In addition, the maximum hydrogen production rate through methanolysis reaction of NaBH₄ by this catalyst was found to be 3171.4 mL min⁻¹gcat⁻¹. Also, the activation energy was determined to be 25.23 kJ mol⁻¹.     

Synthesis of novel biocatalyst from organic waste protonated with acid treatment for hydrogen production

In this research study, orange peel-based biocatalysts developed from different acid protonation were used as a metal-free catalyst for hydrogen production from sodium borohydride (NaBH₄). In order to prepare the orange peel-based biocatalyst with higher catalytic activity, experiments were conducted with pure orange peel, different acid molar concentrations, and calcination temperatures. The physical morphology, surface texture, and chemical interaction were thoroughly analyzed by XRD, FTIR Raman, FESEM, BET, and TGA. As a result of the experiment, it was determined that the highly acid-treated biocatalyst (40% H₃PO₄, 40% H₂SO₄, 40% HCl) and calcinated at 450 °C for 1 h had higher catalytic activity. As a result, bio-hydrogen production at 35 °C and 70 °C methanolysis with 3% NaBH₄ catalyzed by a mixture of acid-treated catalysts were found as 46,213 and 63,842 ml min⁻¹g.cat⁻¹, respectively. However, with the increase of molar concentration of biocatalyst with 40% individual acid prolonged samples, the HGR rates will not have a satisfactory value in comparison with the 40% mixture of the acid-treated catalyst due to less number of active sites.     

PDMA cryogel beads as a catalyst for hydrogen generation from NaBH4 alcoholysis

Poly[2-(dimethylamino)ethyl methacrylate] cryogel beads were prepared under cryogenic conditions via free radical polymerization and used as a catalyst in the production hydrogen (H₂) from NaBH₄ by alcoholysis. The efficiency of the catalyst was investigated in the range of 0–40 °C by both methanolysis and ethylene glycolysis reactions, and its reuse was tested. Accordingly, it was observed that the methanolysis reaction was faster than the ethylene glycolysis reaction. When the hydrogen generation rate (HGR) values between 0 and 40 °C were compared, it was concluded that the methanolysis reaction rate increased from 1550 to 4800 mL.min⁻¹g⁻¹ and the ethylene glycolysis reaction rate increased from 923 to 3551 mL.min⁻¹g⁻¹. In the alcoholysis reaction catalyzed by PDMA cryogel beads, the activation energy was calculated as 19.34 and 22.77 kJ.mol⁻¹ for the methanolysis and ethylene glycolysis reactions, respectively. After six repetitions, the catalyst activity was calculated over 50% for NaBH₄ methanolysis and ethylene glycolysis.     

Chlorella vulgaris microalgae strain modified with zinc chloride as a new support material for hydrogen production from NaBH4 methanolysis using CuB,NiB, and FeB metal catalysts

This study aims to produce hydrogen (HG) from sodium borohydride (NaBH₄) methanolysis using CuB, NiB or FeB catalysts prepared with a different support material including C. vulgaris microalgae strain modified using zinc chloride (CMS-ZnCl₂). The NaBH₄ concentration, metal percentage in the supported-catalyst, the optimal ZnCl₂ percentage, and temperature effect on the NaBH₄ methanolysis were investigated. X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Transmission electron microscopy (TEM), and Scanning electron microscopy (SEM) analysis were performed for the CMS-ZnCl₂-CuB characterization. Also, the low activation energy (Ea) of 22.71 kJ mol⁻¹ was found with the supported catalyst obtained. Under the same conditions, nearly 100% conversion was achieved in the reusability experiments repeated five times, but a gradual decrease in catalytic activity was observed after each use.     

Poly(2-aminoethyl methacrylate) based microgels catalyst system to be used in hydrolysis and methanolysis of NaBH4 for H2 generation

The poly(2-aminoethyl methacrylate) (p(AEM)) microgels were synthesized by microemulsion polymerization technique and used for in situ metal nanoparticle preparation to render as p(AEM)-M (M: Co or Ni) microgel composites and were used in p(AEM) based poly ionic liquid (PIL) microgels. Next, these p(AEM)) based microgel materials were used as catalysts for hydrogen (H₂) production from both hydrolysis and methanolysis reactions of sodium borohydride (NaBH₄). It was found that the catalytic hydrolysis of the NaBH₄ reaction, catalyzed by p(AEM)-Co microgel composite was completed in 140 min, whereas the methanolysis of NaBH₄ methanolysis catalyzed by the PIL of p(AEM)⁺Cl⁻ microgels was completed in 5 min both with 250 ± 2 mL H₂ production. Furthermore, p(AEM)-Co microgel composite catalysts maintained 80% catalytic activity after 5 consecutive uses in NaBH₄ hydrolysis. On the other hand, p(AEM)⁺Cl⁻ microgels were found to afford more than 50% catalytic activity even after 20 repetitive use in NaBH₄ methanolysis due to superior regeneration ability. Moreover, activation energy values for p(AEM)-Co microgel composites catalyzed NaBH₄ hydrolysis reaction were calculated as 38.9 kJ/mol in comparison to 37.3 kJ/mol activation energy of p(AEM)⁺Cl⁻ microgel catalyzed methanolysis reaction.     

Chitosan coated cellulose cotton fibers as catalyst for the H2 production from NaBH4 methanolysis

Cellulose cotton fibers (CF) are coated with chitosan (CH) by simple, economic, and environmental friendly method. The CFs are kept in aqueous acetic acid solution to protonate the fibers before coated with CH solution (1.5% w/v in acetic acid aqueous solution (20% v/v)), represented as CF-A-CH. These materials are characterized by ATR-FTIR, XRD, FE-SEM and EDS which shows the successful coating of the CH on the CF surface. The prepared materials are exploited as an effective catalyst for the production of hydrogen (H₂) from NaBH₄ methanolysis reaction. In addition, other polymers (gelatin and agarose) and surfactants (brij-56, pluronic F-127 and urea) as well as CH in solution form are testified as catalyst for NaBH₄ methanolysis reaction. High generation rate (8 times) and increase in amount of H₂ (150 mL) is observe using only 50 μL CH solution. Furthermore, influences of various constraints, which affect the H₂ production, like catalyst types, catalyst amount, NaBH₄ amount, effect of temperature are also explored. A low activation energy (Ea), almost 14.41 ± 0.46 kJ mol⁻¹ is calculated for NaBH₄ methanolysis reaction in presence of CF-A-CH at temperature range 0 °C - 45 °C. Moreover, the catalyst reusability is also analyzed and no decline in percent conversion is found, whereas a little reduction in percent performance is detected after every cycle and only 18% lost is observed in its percent activity after completion of five successive cycles.     

Magnetic dendritic KCC-1 nanosphere-supported cobalt composite as a separable catalyst for hydrogen generation from NaBH4 hydrolysis

The introduction of magnetism into a catalyst can greatly optimize its separation performance. In the present work, a kind of magnetically separable catalysts for promoting NaBH₄ hydrolysis have been fabricated by anchoring cobalt nanoparticles on magnetic dendritic KCC-1 nanospheres composed of magnetic Fe₃O₄ core and fibrous shell. The fabricated catalysts were characterized with various characterization methods, including absorption spectroscopy (AAS), scanning electron microscopy (SEM), high-resolution transmission electronic microscopy (HRTEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometry (VSM), and Fourier transform infrared (FT-IR), etc. This kind of catalysts exhibit high catalytic activity for promoting the hydrolysis of NaBH₄ under alkaline conditions, giving a hydrogen generation rate and activation energy of 3.83 L min⁻¹ g_Co⁻¹ (30 °C) and 53.63 kJ mol⁻¹, respectively. After used for 5 cycles, the catalyst showed 36.5% catalytic activity reserved. Most importantly, the magnetism of the catalyst made it easily separated and recycled from the solution after the reaction completed. The development of this kind of catalysts could provide a promising option for catalyzing NaBH₄ hydrolysis for portable hydrogen production from.     

Apricot Kernel shell waste treated with phosphoric acid used as a green,metal-free catalyst for hydrogen generation from hydrolysis of sodium borohydride

In this study, grinded apricot kernel shell (GAKS) biobased waste was used for the first time as a cost-effective, efficient, green and metal-free catalyst for hydrogen generation from the hydrolysis reaction of sodium borohydride (NaBH₄). For the hydrogen production by NaBH₄ hydrolysis reaction, GAKS was treated with various acids (HCl, HNO₃, CH₃COOH, H₃PO₄), salt (ZnCl₂) and base (KOH). As a result, the phosphoric acid (H₃PO₄) demonstrated better catalytic activity than other chemical agents. The hydrolysis of NaBH₄ with the GAKS-catalyst (GAKS_cat) was studied depending on different parameters such as acid concentration, furnace burning temperature and time, catalyst amount, NaBH₄ concentration and hydrolysis reaction temperature. The obtained GAKS_cat was characterized by ICP-MS, elemental analysis, TGA, XRD, FT-IR, Boehm, TEM and SEM analyses and was evaluated for its catalytic activity in the hydrogen production from the hydrolysis reaction of NaBH₄. According to the results, the optimal H₃PO₄ percentage was found as 15%. The maximum hydrogen generation rate from the hydrolysis of NaBH₄ with the GAKS_cat was calculated as 20,199 mL min⁻¹ g_cat⁻¹. As a result, it can be said that GAKS treated with 15% H₃PO₄ as a catalyst for hydrogen production is an effective alternative due to its high hydrogen production rate.