Postbuckling of functionally graded fiber reinforced composite laminated cylindrical shells, Part I: Theory and solutions

Buckling and postbuckling behavior are presented for fiber reinforced composite (FRC) laminated cylindrical shells subjected to axial compression or a uniform external pressure in thermal environments. Two kinds of fiber reinforced composite laminated shells, namely, uniformly distributed (UD) and functionally graded (FG) reinforcements, are considered. The governing equations are based on a higher order shear deformation shell theory with von Kármán-type of kinematic non-linearity and including the extension-twist, extension-flexural and flexural-twist couplings. The thermal effects are also included, and the material properties of FRC laminated cylindrical shells are estimated through a micromechanical model and are assumed to be temperature dependent. The non-linear prebuckling deformations and the initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths of FRC laminated cylindrical shells.     

Buckling and postbuckling of anisotropic laminated cylindrical shells under combined axial compression and torsion

A postbuckling analysis is presented for an anisotropic laminated cylindrical shell of finite length subjected to combined loading of axial compression and torsion. The governing equations are based on classical shell theory with von Kármán–Donnell-type of kinematic nonlinearity and including the extension–twist, extension–flexural and flexural–twist couplings. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine interactive buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect, anisotropic laminated cylindrical shells for different values of load-proportional parameters. The results show that the postbuckling characteristics depend significantly upon the load-proportional parameter. The results reveal that in combined loading cases the postbuckling equilibrium path is unstable and the shell structure is imperfection-sensitive.     

Postbuckling of functionally graded cylindrical shells with tangential edge restraints and temperature-dependent properties

This paper presents an analytical approach to investigate the buckling and postbuckling behavior of functionally graded cylindrical shells subjected to thermal and axial compressive loads. Material properties are assumed to be temperature dependent and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of constituents. The governing equations are established within the framework of classical thin shallow shell theory taking both geometrical nonlinearity in von Kármán–Donnell sense and initial imperfection into consideration. Thermal stability analysis also incorporates the effects of tangential edge constraints. A Galerkin procedure is applied to derive expressions of load-deflection relations from which the thermal buckling loads and postbuckling curves of the shells are obtained by an iteration. Effects played by material and geometrical properties, tangential stiffness, imperfection and buckling modes are discussed.     

Postbuckling of nanotube-reinforced composite cylindrical shells in thermal environments,Part II: Pressure-loaded shells

A postbuckling analysis is presented for nanocomposite cylindrical shells reinforced by single-walled carbon nanotubes (SWCNTs) subjected to lateral or hydrostatic pressure in thermal environments. The multi-scale model for functionally graded carbon nanotube-reinforced composite (FG-CNTRC) shells under external pressure is proposed and a singular perturbation technique is employed to determine the buckling pressure and postbuckling equilibrium path. Numerical results for pressure-loaded, perfect and imperfect, FG-CNTRC cylindrical shells are obtained under different sets of thermal environmental conditions. The results for uniformly distributed CNTRC shell, which is a special case in the present study, are compared with those of the FG-CNTRC shell. The results show that the linear functionally graded reinforcements can increase the buckling pressure as well as postbuckling strength of the shell under external pressure. The results reveal that the carbon nanotube volume fraction has a significant effect on the buckling pressure and postbuckling behavior of CNTRC shells.     

Postbuckling of nanotube-reinforced composite cylindrical shells in thermal environments,Part I: Axially-loaded shells

A postbuckling analysis is presented for nanocomposite cylindrical shells reinforced by single-walled carbon nanotubes (SWCNTs) subjected to axial compression in thermal environments. Two kinds of carbon nanotube-reinforced composite (CNTRC) shells, namely, uniformly distributed (UD) and functionally graded (FG) reinforcements, are considered. The material properties of FG-CNTRCs are assumed to be graded in the thickness direction, and are estimated through a micromechanical model. The governing equations are based on a higher order shear deformation theory with a von Kármán-type of kinematic nonlinearity. The thermal effects are also included and the material properties of CNTRCs are assumed to be temperature-dependent. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of axially-loaded, perfect and imperfect, FG-CNTRC cylindrical shells under different sets of thermal environmental conditions. The results for UD-CNTRC shell, which is a special case in the present study, are compared with those of the FG-CNTRC shell. The results show that the linear functionally graded reinforcements can increase the buckling load as well as postbuckling strength of the shell under axial compression. The results reveal that the CNT volume fraction has a significant effect on the buckling load and postbuckling behavior of CNTRC shells.     

Postbuckling of pressure-loaded FGM hybrid cylindrical shells in thermal environments

A postbuckling analysis is presented for a functionally graded cylindrical shell with piezoelectric actuators subjected to lateral or hydrostatic pressure combined with electric loads in thermal environments. Heat conduction and temperature-dependent material properties are both taken into account. The temperature field considered is assumed to be a uniform distribution over the shell surface and varied in the thickness direction and the electric field considered only has non-zero-valued component E_Z. The material properties of functionally graded materials (FGMs) are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents, and the material properties of both FGM and piezoelectric layers are assumed to be temperature-dependent. The governing equations are based on a higher order shear deformation theory with a von Kármán–Donnell-type of kinematic nonlinearity. A boundary layer theory of shell buckling is extended to the case of FGM hybrid laminated cylindrical shells of finite length. A singular perturbation technique is employed to determine the buckling pressure and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of pressure-loaded, perfect and imperfect, FGM cylindrical shells with fully covered piezoelectric actuators under different sets of thermal and electric loading conditions. The results reveal that temperature dependency, temperature change and volume fraction distribution have a significant effect on the buckling pressure and postbuckling behavior of FGM hybrid cylindrical shells. In contrast, the control voltage only has a very small effect on the buckling pressure and postbuckling behavior of FGM hybrid cylindrical shells.     

Thermal buckling and postbuckling behavior of functionally graded carbon nanotube-reinforced composite cylindrical shells

Thermal postbuckling analysis is presented for nanocomposite cylindrical shells reinforced by single-walled carbon nanotubes (SWCNTs) subjected to a uniform temperature rise. The SWCNTs are assumed to be aligned and straight with a uniform layout. Two kinds of carbon nanotube-reinforced composite (CNTRC) shells, namely, uniformly distributed (UD) and functionally graded (FG) reinforcements, are considered. The material properties of FG-CNTRCs are assumed to be graded in the thickness direction, and are estimated through a micromechanical model. The governing equations are based on a higher order shear deformation theory with a von Kármán-type of kinematic nonlinearity. The thermal effects are also included and the material properties of CNTRCs are assumed to be temperature-dependent. Based on the multi-scale approach, numerical illustrations are carried out for perfect and imperfect, FG- and UD-CNTRC shells under different values of the nanotube volume fractions. The results show that the buckling temperature as well as thermal postbuckling strength of the shell can be increased as a result of a functionally graded reinforcement. It is found that in most cases the CNTRC shell with intermediate nanotube volume fraction does not have intermediate buckling temperature and initial thermal postbuckling strength.     

Non-linear buckling and postbuckling of shear deformable anisotropic laminated cylindrical shell subjected to varying external pressure loads

Non-linear buckling and postbuckling of a moderately thick anisotropic laminated cylindrical shell of finite length subjected to lateral pressure, hydrostatic pressure and external liquid pressure has been presented in the paper. The material of each layer of the shell is assumed to be linearly elastic, anisotropic and fiber-reinforced. The governing equations are based on a higher order shear deformation shell theory with von Kármán–Donnell-type of kinematic non-linearity and including the extension/twist, extension/flexural and flexural/twist couplings. The non-linear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling pressure and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect, moderately thick, anisotropic laminated cylindrical shells with different values of shell parameters and stacking sequence. The results confirm that there exists a circumferential stress along with an associate shear stress when the shell is subjected to external pressure.     

Postbuckling of nanotube-reinforced composite cylindrical shells under combined axial and radial mechanical loads in thermal environment

A postbuckling analysis is presented for nanocomposite cylindrical shells reinforced by single-walled carbon nanotubes (SWCNTs) subjected to combined axial and radial mechanical loads in thermal environment. Two types of carbon nanotube-reinforced composite (CNTRC) shells, namely, uniformly distributed (UD) and functionally graded (FG) reinforcements, are considered. The material properties of FG-CNTRCs are assumed to be graded in the thickness direction, and are estimated through a micromechanical model. The governing equations are based on a higher order shear deformation shell theory with a von Kármán-type of kinematic nonlinearity. The thermal effects are also included and the material properties of CNTRCs are assumed to be temperature-dependent. A boundary layer theory and associated singular perturbation technique are employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of perfect and imperfect, FG-CNTRC cylindrical shells under combined action of external pressure and axial compression for different values of load-proportional parameters. The results for UD-CNTRC shell, which is a special case in the present study, are compared with those of the FG-CNTRC shell.     

Dynamic buckling of FGM truncated conical shells subjected to non-uniform normal impact load

Dynamic buckling of functionally graded materials truncated conical shells subjected to normal impact loads is discussed in this paper. In the analysis, the material properties of functionally graded materials shells are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. Geometrically nonlinear large deformation and the initial imperfections are taken into account. Galerkin procedure and Runge–Kutta integration scheme are used to solve nonlinear governing equations numerically. From the characteristics of dynamic response obtain critical loads of the shell according to B-R criterion. From the research results it can be found that gradient properties of the materials have significant effects on the critical buckling loads of FGM shells.     

Thermomechanical postbuckling analysis of functionally graded plates and shallow cylindrical shells

Summary. In this paper, an analytic solution is provided for the postbuckling behavior of plates and shallow cylindrical shells made of functionally graded materials under edge compressive loads and a temperature field. The material properties of the functionally graded shells are assumed to vary continuously through the thickness of the shell according to a power law distribution of the volume fraction of the constituents. The fundamental equations for thin rectangular shallow shells of FGM are obtained using the von Karman theory for large transverse deflection, and the solution is obtained in terms of mixed Fourier series. The effect of material properties, boundary conditions and thermomechanical loading on the buckling behavior and stress field are determined and discussed. The results reveal that thermomechanical coupling effects and the boundary conditions play a major role in dictating the response of the functionally graded plates and shells under the action of edge compressive loads.     

Nonlinear buckling and postbuckling of imperfect piezoelectric S-FGM circular cylindrical shells with metal–ceramic–metal layers in thermal environment using Reddy's third-order shear deformation shell theory

Based on Reddy's third-order shear deformation shell theory, this paper studied the nonlinear buckling and postbuckling response of imperfect Sigmoid functionally graded circular cylindrical shells in a thermal environment with an outer surface-bonded piezoelectric actuator. Material properties are temperature dependent and graded in the thickness direction with two shell's outer surfaces rich of metal and ceramic in the middle (S-FGM). The shell is subjected to uniform external pressure, axial compressive, electrical loads and resting on elastic foundations. The obtained numerical results are validated by comparing with other results reported in the open literature.     

Nonlinear bending and postbuckling of FGM cylindrical panels subjected to combined loadings and resting on elastic foundations in thermal environments

A nonlinear analysis is presented for FGM cylindrical panels resting on elastic foundations subjected to the combined actions of uniform lateral pressure and compressive edge loads in thermal environments. The two cases of postbuckling of initially pressurized FGM cylindrical panels and of nonlinear bending of initially compressed cylindrical panels are considered. Heat conduction and temperature-dependent material properties are both taken into account. Material properties of functionally graded materials (FGMs) are assumed to be graded in the thickness direction based on Mori-Tanaka micromechanics model. The formulations are based on a higher order shear deformation theory and von Kármán strain displacement relationships. The panel-foundation interaction and thermal effects are also included. The governing equations are solved by a singular perturbation technique along with a two-step perturbation approach. The numerical illustrations concern the postbuckling behavior and the nonlinear bending response of FGM cylindrical panels with two constituent materials resting on Pasternak elastic foundations. The effects of volume fraction index, temperature variation, foundation stiffness as well as initial stress on the postbuckling behavior and the nonlinear bending response of FGM cylindrical panels are discussed in detail.     

Postbuckling of functionally graded fiber reinforced composite laminated cylindrical shells, Part II: Numerical results

In this Part, the extensive parametric studies performed are reported and numerical results are presented for the buckling and postbuckling of fiber reinforced polymer matrix and metal matrix composite laminated shells subjected to axial compression or external pressure under different sets of environmental conditions. Two kinds of fiber reinforced composite laminated shells, namely, uniformly distributed (UD) and functionally graded (FG) reinforcements, are considered. The numerical results show that the buckling loads as well as postbuckling strength of the shell can be increased as a result of functionally graded fiber reinforcements. The results reveal that the effect of functionally graded fiber reinforcements on the buckling loads and postbuckling strength of shell with polymer matrix is more pronounced compared to the shell with metal matrix in the case of axial compression. In contrast, in the case of external pressure, the functionally graded fiber reinforcements may have a significant effect on the buckling pressure and postbuckling strength of the shell with metal matrix.     

Nonlinear buckling and postbuckling behavior of cylindrical nanoshells subjected to combined axial and radial compressions incorporating surface stress effects

In the present study, the Gurtin-Murdoch elasticity theory, as a theory capable of capturing size effects, is implemented to predict the nonlinear buckling and postbuckling response of cylindrical nanoshells under combined axial and radial compressive loads in the presence of surface stress effects. For this purpose, a size-dependent shell mode containing geometric nonlinearity is proposed within the framework of the classical shell theory. Because it is necessary to satisfy balance conditions on the surfaces of nanoshell, it is assumed that the normal stress component of the bulk varies linearly through the shell thickness. On the basis of a variational formulation using the principle of virtual work, the non-classical governing differential equations are derived. Subsequently, a boundary layer theory is employed including the nonlinear prebuckling deformations and the large deflections in the postbuckling regime. Then a two-stepped perturbation methodology is utilized to obtain the size-dependent critical buckling loads and the postbuckling equilibrium paths of nanoshells corresponding to the axial dominated and radial dominated loading cases. It is revealed that in the radial dominated loading case, a positive value of surface elastic constants leads to increase the critical buckling load but decrease the critical end-shortening of nanoshell. However, in the axial dominated loading case, surface elastic constants with positive sign causes to increase the both critical buckling load and critical end-shortening of nanoshell.     

Postbuckling responses of functionally graded cylindrical shells under axial compression and thermal loads

This paper presents a postbuckling analysis of functionally graded cylindrical shells under axial compression and thermal loads using the element-free kp-Ritz method. The formulation is developed to handle problems of small strains and moderate rotations, based on the first-order shear deformation shell theory and von Kármán strains. The effective material properties of the shells are assumed to be continuous along their thickness direction, and are obtained using a power-law distribution of the volume fractions of the constituents. The approximations of the two-dimensional displacement fields are expressed in terms of a set of mesh-free kernel particle functions. The system bending stiffness is evaluated using a stabilized conforming nodal integration method and the membrane and shear terms are estimated using direct nodal integration to eliminate shear locking. The postbuckling path is traced using a combination of the arc-length and mesh-free kp-Ritz methods. The proposed formulation is validated by comparing the results of the proposed method with those in the literature. The postbuckling responses of two types of functionally graded conical shells, one composed of Al/ZrO₂ and the other of SUS304/Si₃N₄, are investigated and the effects of volume fraction, boundary condition, and length-to-thickness ratio on postbuckling behavior are discussed in detail.     

Buckling of FGM cylindrical shells subjected to pure bending load

In this paper, buckling behaviors of composite cylindrical shells made from functionally graded materials (FGMs) subjected to pure bending load were investigated. The material properties were assumed to be graded along the thickness. The non-uniform bending force on the shell section was considered in the buckling government equation of FGM cylindrical shells based on the Donnell shallow shell theory. The prebuckling deformation of the FGM cylindrical shells was neglected and the buckling mode was assumed to occur non-uniformly in local district along the shell circumferential direction. The eigenvalue method was used to obtain the buckling critical condition. The theoretical results were in excellent agreement with those of ABAQUS code. Results show that the inhomogenity of the materials is significant for buckling of FGM cylindrical shells.     

热环境中的功能梯度扁球壳非线性稳定性分析

基于经典壳理论和von Karman几何非线性理论,导出了功能梯度圆底扁球壳的位移型几何非线性控制方程及简支边界条件,推导过程考虑了均匀变温场及均布外侧压力。用打靶法计算了由控制方程和边界条件提出的两点边值问题,得到了壳体轴对称变形的数值结果。考察了壳体几何参数、材料横向梯度特性、组份材料体积分数指数和弹性模量以及均匀变温场对壳体屈曲平衡路径、上/下临界荷载和平衡构形的影响。数值结果表明:随组分材料体积分数指数的增加和弹性模量的减小,壳体上临界荷载均会显著减小;体积分数指数对壳体下临界荷载影响规律较复杂;均匀升温使壳体上/下临界荷载显著增加/减小。材料横向梯度特性对简支边功能梯度圆底扁球壳屈曲平衡路径和后屈曲稳态构形有显著影响。该文末给出了便于工程设计的两个数表和一些数值曲线。     

Buckling and Postbuckling Behavior of Functionally Graded Nanotube-Reinforced Composite Plates in Thermal Environments

This paper investigates the buckling and postbuckling of simply supported, nanocomposite plates with functionally graded nanotube reinforcements subjected to uniaxial compression in thermal environments. The nanocomposite plates are assumed to be functionally graded in the thickness direction using single-walled carbon nanotubes (SWCNTs) serving as reinforcements and the plates' effective material properties are estimated through a micromechanical model. The higher order shear deformation plate theory with a von Kármán-type of kinematic nonlinearity is used to model the composite plates and a two-step perturbation technique is performed to determine the buckling loads and postbuckling equilibrium paths. Numerical results for perfect and imperfect, geometrically mid-plane symmetric functionally graded carbon nanotube reinforced composite (FG-CNTRC) plates are obtained under different sets of thermal environmental conditions. The results for uniformly distributed CNTRC plate, which is a special case in the present study, are compared with those of the FG-CNTRC plate. The results show that the buckling loads as well as postbuckling strength of the plate can be significantly increased as a result of a functionally graded nanotube reinforcement. The results reveal that the carbon nanotube volume fraction has a significant effect on the buckling load and postbuckling behavior of CNTRC plates.     

A comparison of buckling and postbuckling behavior of FGM plates with piezoelectric fiber reinforced composite actuators

Compressive postbuckling under thermal environments and thermal postbuckling due to a uniform temperature rise are presented for a simply supported, shear deformable functionally graded plate with piezoelectric fiber reinforced composite (PFRC) actuators. The material properties of functionally graded materials (FGMs) are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents, and the material properties of both FGM and PFRC layers are assumed to be temperature-dependent. The governing equations are based on a higher order shear deformation plate theory that includes thermo-piezoelectric effects. The initial geometric imperfection of the plate is taken into account. A two step perturbation technique is employed to determine buckling loads (temperature) and postbuckling equilibrium paths. The numerical illustrations concern the compressive and thermal postbuckling behaviors of perfect and imperfect, geometrically mid-plane symmetric FGM plates with fully covered or embedded PFRC actuators under different sets of thermal and electric loading conditions. The results for monolithic piezoelectric actuator, which is a special case in the present study, are compared with those of PFRC actuators. The results reveal that, in the compressive buckling case, the applied voltage usually has a small effect on the postbuckling load–deflection curves of the plate with PFRC actuators, whereas in the thermal buckling case, the effect of applied voltage is more pronounced for the plate with PFRC actuators, compared to the results of the same plate with monolithic piezoelectric actuators.