Manipulation of Charge and Exciton Distribution Based on Blue Aggregation‐Induced Emission Fluorophors: A Novel Concept to Achieve High‐Performance Hybrid White Organic Light‐Emitting Diodes

The aggregation‐induced emission (AIE) phenomenon is important in organic light‐emitting diodes (OLEDs), for it can potentially solve the aggregation‐caused quenching problem. However, the performance of AIE fluorophor‐based OLEDs (AIE OLEDs) is unsatisfactory, particularly for deep‐blue devices (CIEy < 0.15). Here, by enhancing the device engineering, a deep‐blue AIE OLED exhibits low voltage (i.e., 2.75 V at 1 cd m^?2), high luminance (17 721 cd m^?2), high efficiency (4.3 lm W^?1), and low efficiency roll‐off (3.6 lm W^?1 at 1000 cd m^?2), which is the best deep‐blue AIE OLED. Then, blue AIE fluorophors, for the first time, have been demonstrated to achieve high‐performance hybrid white OLEDs (WOLEDs). The two‐color WOLEDs exhibit i) stable colors and the highest efficiency among pure‐white hybrid WOLEDs (32.0 lm W^?1); ii) stable colors, high efficiency, and very low efficiency roll‐off; or iii) unprecedented efficiencies at high luminances (i.e., 70.2 cd A^?1, 43.4 lm W^?1 at 10 000 cd m^?2). Moreover, a three‐color WOLED exhibits wide correlated color temperatures (10 690–2328 K), which is the first hybrid WOLED showing sunlight‐style emission. These findings will open a novel concept that blue AIE fluorophors are promising candidates to develop high‐performance hybrid WOLEDs, which have a bright prospect for the future displays and lightings.     

A Multifunctional Bipolar Luminogen with Delayed Fluorescence for High‐Performance Monochromatic and Color‐Stable Warm‐White OLEDs

Increasing exciton utilization and reducing exciton annihilation are crucial to achieve high performance of organic light‐emitting diodes (OLEDs), which greatly depend on molecular engineering of emitters and hosts. A novel luminogen (SBF‐BP‐DMAC) is synthesized and characterized. Its crystal and electronic structures, thermal stability, electrochemical behavior, carrier transport, photoluminescence, and electroluminescence are investigated. SBF‐BP‐DMAC exhibits enhanced photoluminescence and promotes delayed fluorescence in solid state and bipolar carrier transport ability, and thus holds multifunctionality of emitter and host for OLEDs. Using SBF‐BP‐DMAC as an emitter, the nondoped OLEDs exhibit maximum electroluminescence (EL) efficiencies of 67.2 cd A^?1, 65.9 lm W^?1, and 20.1%, and the doped OLEDs provide maximum EL efficiencies of 79.1 cd A^?1, 70.7 lm W^?1, and 24.5%. A representative orange phosphor, Ir(tptpy)₂acac, is doped into SBF‐BP‐DMAC for OLED fabrication, giving rise to superior EL efficiencies of 88.0 cd A^?1, 108.0 lm W^?1, and 26.8% for orange phosphorescent OLEDs, and forward‐viewing EL efficiencies of 69.3 cd A^?1, 45.8 lm W^?1, and 21.0% for two‐color hybrid warm‐white OLEDs. All of these OLEDs can retain high EL efficiencies at high luminance, with very small efficiency roll‐offs. The outstanding EL performance demonstrates the great potentials of SBF‐BP‐DMAC in practical display and lighting devices.     

White Organic LED with a Luminous Efficacy Exceeding 100 lm W−1 without Light Out‐Coupling Enhancement Techniques

Luminous efficacy (LE), which is given by the ratio of luminous flux to power, is commonly used to measure the power consumption of a light source. Unfortunately, the LE of white organic light‐emitting diodes (OLEDs) still lags behind those of inorganic LED for practically used (>100 lm W^?1). In this paper, an ultraefficient white OLED is discussed based on a newly designed thermally activated delayed fluorescent exciplex host. The resulting white OLED delivers an unusually high forward‐viewing LE of 105.0 lm W^?1 and external quantum efficiency (EQE) η_ext of ≈30% (without using any optical out‐coupling techniques). As far as it is known, specifically, these efficiencies are the highest values among the published white OLEDs to date. Two‐color warm white emission is realized with Commission International de I'Eclairage coordinates of (0.40, 0.48) at a brightness of 1000 cd m^?2. Furthermore, the well‐matched energy alignment endows the device with an extremely low turn‐on voltage (≈2.5 V). Such high efficiencies and excellent device performance should benefit from the advantages of exciplex material solely used as the host. Therefore, this study anticipates that the findings have great potential to boost the LE of OLEDs, and more importantly, fulfill the power efficacy requirement for lighting applications.     

Exciplex‐Forming Co‐host for Organic Light‐Emitting Diodes with Ultimate Efficiency

Phosphorescent organic light‐emitting diodes (OLEDs) with ultimate efficiency in terms of the external quantum efficiency (EQE), driving voltage, and efficiency roll‐off are reported, making use of an exciplex‐forming co‐host. This exciplex‐forming co‐host system enables efficient singlet and triplet energy transfers from the host exciplex to the phosphorescent dopant because the singlet and triplet energies of the exciplex are almost identical. In addition, the system has low probability of direct trapping of charges at the dopant molecules and no charge‐injection barrier from the charge‐transport layers to the emitting layer. By combining all these factors, the OLEDs achieve a low turn‐on voltage of 2.4 V, a very high EQE of 29.1% and a very high power efficiency of 124 lm W^?1. In addition, the OLEDs achieve an extremely low efficiency roll‐off. The EQE of the optimized OLED is maintained at more than 27.8%, up to 10 000 cd m^?2.     

Efficient Bipolar Blue AIEgens for High‐Performance Nondoped Blue OLEDs and Hybrid White OLEDs

Blue organic luminescent materials play a crucial role in full‐color display and white lighting but efficient ones meeting commercial demands are very rare. Herein, the design and synthesis of tailor‐made bipolar blue luminogens with an anthracene core and various functional groups are reported. The thermal stabilities, photophysical properties, electronic structures, electrochemical behaviors, carrier transport abilities, and electroluminescence performances are systematically investigated. The luminogen TPE‐TAPBI containing a tetraphenylethene moiety shows aggregation‐induced emission, while another luminogen TriPE‐TAPBI bearing a triphenylethene unit exhibits light aggregation‐caused quenching. In comparison with TriPE‐TAPBI, TPE‐TAPBI has stronger blue emission in neat film and functions more efficiently in nondoped organic light‐emitting diodes (OLEDs). High maxima current, power, and external quantum efficiencies of 7.21 cd A^?1, 6.78 lm W^?1, and 5.73%, respectively, are attained by the nondoped blue OLED of TPE‐TAPBI (CIE_x,y = 0.15, 0.16). Moreover, efficient two‐color hybrid warm white OLEDs (CIE_x,y = 0.457, 0.470) are achieved using TPE‐TAPBI neat film as the blue‐emitting component, which provide total current, power, external quantum efficiencies of up to 70.5 lm W^?1, 76.0 cd A^?1, and 28% at 1000 cd m^?2, respectively. These blue and white OLEDs are among the most efficient devices with similar colors in the literature.     

Solution‐Processed Highly Efficient Alternating Current‐Driven Field‐Induced Polymer Electroluminescent Devices Employing High‐k Relaxor Ferroelectric Polymer Dielectric

Organic thin‐film electroluminescent (EL) devices, such as organic light‐emitting diodes (OLEDs), typically operate using constant voltage or direct current (DC) power sources. Such approaches require power converters (introducing power losses) and make devices sensitive to dimensional variations that lead to run away currents at imperfections. Devices driven by time‐dependent voltages or alternating current (AC) may offer an alternative to standard OLED technologies. However, very little is known about how this might translate into overall performance of such devices. Here, a solution‐processed route to creating highly efficient AC field‐induced polymer EL (FIPEL) devices is demonstrated. Such solution‐processed FIPEL devices show maximum luminance, current efficiency, and power efficiency of 3000 cd m^?2, 15.8 cd A^?1, and 3.1 lm W^?1 for blue emission, 13 800 cd m^?2, 76.4 cd A^?1, and 17.1 lm W^?1 for green emission, and 1600 cd m^?2, 8.8 cd A^?1, and 1.8 lm W^?1 for orange‐red emission. The high luminance and efficiency, and solution process pave the way to industrial roll‐to‐roll manufacturing of solid state lighting and display.     

Efficiently Releasing the Trapped Energy Flow in White Organic Light‐Emitting Diodes with Multifunctional Nanofunnel Arrays

White organic light‐emitting diodes (OLEDs) hold great promise for applications in displays and lighting due to high efficiency and superior white color balance. However, further improvement in efficiency remains a continuous and urgent demand due to limited energy flow extraction. A powerful method for drastically releasing the trapped energy flow in conventional white OLEDs is demonstrated by implementing unique quasi‐periodic subwavelength nanofunnel arrays (NFAs) via soft nanoimprinting lithography, which is ideal for enhancing light extraction without any spectral distortion or angular dependence. The resulting efficiency is over 2 times that of a conventional OLED used as a comparison. The external quantum efficiency and power efficiency are raised to 32.4% and 56.9 lm W^?1, respectively. Besides, the substantial increase in efficiency over a broad bandwidth with angular color stability, the experimental proofs show that the NFA‐based extraction structure affords the enticing capacity against scrubbing and the self‐cleaning feature, which are critical to the commercial viability in practical applications.     

Utilizing a Spiro TADF Moiety as a Functional Electron Donor in TADF Molecular Design toward Efficient “Multichannel” Reverse Intersystem Crossing

Designing thermally activated delayed fluorescence (TADF) materials with an efficient reverse intersystem crossing (RISC) process is regarded as the key to actualize efficient organic light‐emitting diodes (OLEDs) with low efficiency roll‐off. Herein, a novel molecular design strategy is reported where a typical TADF material 10‐phenyl‐10H, 10′H‐spiro[acridine‐9, 9′‐anthracen]‐10′‐one (ACRSA) is utilized as a functional electron donor to design TADF materials of 2,4,6‐triphenyl‐1,3,5‐triazine(TRZ)‐p‐ACRSA and TRZ‐m‐ACRSA. It is unique that the intramolecular charge transfer of the ACRSA moiety and the intramolecular and through‐space intermolecular charge transfer between the TRZ and ACRSA moieties, provide a “multichannel” effect to enhance the rate of the reverse intersystem crossing process (k_risc) exceeding 10^?6 s^?1. TADF OLEDs based on TRZ‐p‐ACRSA as an emitter show a maximum external quantum efficiency (EQE) of 28% with reduced efficiency roll‐off (EQEs of 27.5% and 22.1% at 100 and 1000 cd m^?2, respectively). Yellow phosphorescent OLEDs utilizing TRZ‐p‐ACRSA as a host material show record‐high EQE of 25.5% and power efficiency of 115 lm W^?1, while phosphorescent OLEDs based on TRZ‐m‐ACRSA show further lower efficiency roll‐off with EQEs of 25.2%, 24.3%, and 21.5% at 100, 1000, and 10 000 cd m^?2, respectively.     

Efficient Nondoped Blue Fluorescent Organic Light‐Emitting Diodes (OLEDs) with a High External Quantum Efficiency of 9.4% @ 1000 cd m−2 Based on Phenanthroimidazole−Anthracene Derivative

Organic light‐emitting diodes (OLEDs) can promise flexible, light weight, energy conservation, and many other advantages for next‐generation display and lighting applications. However, achieving efficient blue electroluminescence still remains a challenge. Though both phosphorescent and thermally activated delayed fluorescence materials can realize high‐efficiency via effective triplet utilization, they need to be doped into appropriate host materials and often suffer from certain degree of efficiency roll‐off. Therefore, developing efficient blue‐emitting materials suitable for nondoped device with little efficiency roll‐off is of great significance in terms of practical applications. Herein, a phenanthroimidazole?anthracene blue‐emitting material is reported that can attain high efficiency at high luminescence in nondoped OLEDs. The maximum external quantum efficiency (EQE) of nondoped device is 9.44% which is acquired at the luminescence of 1000 cd m^?2. The EQE is still as high as 8.09% even the luminescence reaches 10 000 cd m^?2. The maximum luminescence is ≈57 000 cd m^?2. The electroluminescence (EL) spectrum shows an emission peak of 470 nm and the Commission International de L'Eclairage (CIE) coordinates is (0.14, 0.19) at the voltage of 7 V. To the best of the knowledge, this is among the best results of nondoped blue EL devices.     

Solution‐Processed Extremely Efficient Multicolor Perovskite Light‐Emitting Diodes Utilizing Doped Electron Transport Layer

A specially designed n‐type semiconductor consisting of Ca‐doped ZnO (CZO) nanoparticles is used as the electron transport layer (ETL) in high‐performance multicolor perovskite light‐emitting diodes (PeLEDs) fabricated using an all‐solution process. The band structure of the ZnO is tailored via Ca doping to create a cascade of conduction energy levels from the cathode to the perovskite. This energy band alignment significantly enhances conductivity and carrier mobility in the CZO ETL and enables controlled electron injection, giving rise to sub‐bandgap turn‐on voltages of 1.65 V for red emission, 1.8 V for yellow, and 2.2 V for green. The devices exhibit significantly improved luminance yields and external quantum efficiencies of, respectively, 19 cd A^?1 and 5.8% for red emission, 16 cd A^?1 and 4.2% for yellow, and 21 cd A^?1 and 6.2% for green. The power efficiencies of these multicolor devices demonstrated in this study, 30 lm W^?1 for green light‐emitting PeLED, 28 lm W^?1 for yellow, and 36 lm W^?1 for red are the highest to date reported. In addition, the perovskite layers are fabricated using a two‐step hot‐casting technique that affords highly continuous (>95% coverage) and pinhole‐free thin films. By virtue of the efficiency of the ETL and the uniformity of the perovskite film, high brightnesses of 10 100, 4200, and 16,060 cd m^?2 are demonstrated for red, yellow, and green PeLEDs, respectively. The strategy of using a tunable ETL in combination with a solution process pushes perovskite‐based materials a step closer to practical application in multicolor light‐emitting devices.     

High‐Performance Hybrid White Organic Light‐Emitting Diodes with Superior Efficiency/Color Rendering Index/Color Stability and Low Efficiency Roll‐Off Based on a Blue Thermally Activated Delayed Fluorescent Emitter

Thermally activated delayed fluorescence (TADF)‐based white organic light‐emitting diodes (WOLEDs) are highly attractive because the TADF emitters provide a promising alternative route to harvest triplet excitons. One of the major challenges is to achieve superior efficiency/color rendering index/color stability and low efficiency roll‐off simultaneously. In this paper, high‐performance hybrid WOLEDs are demonstrated by employing an efficient blue TADF emitter combined with red and green phosphorescent emitters. The resulting WOLED shows the maximum external quantum efficiency, current efficiency, and power efficiency of 23.0%, 51.0 cd A^?1, and 51.7 lm W^?1, respectively. Moreover, the device exhibits extremely stable electroluminescence spectra with a high color rendering index of 89 and Commission Internationale de L'Eclairage coordinates of (0.438, 0.438) at the practical brightness of 1000 cd m^?2. The achievement of these excellent performances is systematically investigated by versatile experimental and theoretical evidences, from which it is concluded that the utilization of a blue‐green‐red cascade energy transfer structure and the precise manipulation of charges and excitons are the key points. It can be anticipated that this work might be a starting point for further research towards high‐performance hybrid WOLEDs.     

High‐Performance All‐Polymer White‐Light‐Emitting Diodes Using Polyfluorene Containing Phosphonate Groups as an Efficient Electron‐Injection Layer

We report an efficient non‐doped all‐polymer polymer white‐light‐emitting diode (PWLED) with a fluorescent three‐color, white single polymer as an emissive layer, an ethanol‐soluble phosphonate‐functionalized polyfluorene (PF‐EP) as an electron‐injection/electron‐transport layer, and LiF/Al as a cathode, respectively. The all‐polymer PWLED achieves a peak external quantum efficiency of 6.7%, a forward viewing luminous efficiency of 15.4 cd A^?1 and a power efficiency of 11.4 lm W^?1, respectively, at a brightness of 347 cd m^?2 with Commission Internationale d’Eclairage coordinates of (0.37, 0.42) and color rendering index of 85, which is the best results among the non‐doped PWLEDs. Moreover, this kind of PWLED not only shows excellent color stability, but also achieves high brightness at low voltages. The brightness reaches 1000, 10000, and 46830 cd m^?2 at voltages of 4.5, 5.4, and 7.5 V, respectively. The significant enhancement of white‐single‐polymer‐based PWLEDs with PF‐EP/LiF/Al to replace for the commonly used Ca/Al cathode is attributed to the more efficient electron injection at PF‐EP/LiF/Al interfaces, and the coordinated protecting effect of PF‐EP from diffusion of Al atoms into the emissive layer and exciton‐quenching near cathode interfaces. The developed highly efficient non‐doped all‐polymer PWLEDs are well suitable for solution‐processing technology and provide a huge potential of low‐cost large‐area manufacturing for PWLEDs.     

Pyridine‐Containing Electron‐Transport Materials for Highly Efficient Blue Phosphorescent OLEDs with Ultralow Operating Voltage and Reduced Efficiency Roll‐Off

A series of pyridine‐containing electron‐transport materials are developed as an electron‐transport layer for the FIrpic‐based blue phosphorescent organic light‐emitting diodes. Their energy levels can be tuned by the introduction of pyridine rings in the framework and on the periphery of the molecules. Significantly reduced operating voltage is achieved without compromising external quantum efficiency by solely tuning the nitrogen atom orientations of those pyidine rings. Unprecedented low operating voltages of 2.61 and 3.03 V are realized at 1 and 100 cd m^?2, giving ever highest power efficiency values of 65.8 and 59.7 lm W^?1, respectively. In addition, the operating voltages at 100 cd m^?2 can be further reduced to 2.70 V by using a host material with a small singlet‐triplet exchange energy, and the threshold voltage for electroluminescence can even be 0.2–0.3 V lower than the theoretical minimum value of the photon energy divided by electron charge. Aside from the reduced operating voltage, a further reduced roll‐off in efficiency is also achieved by the combination of an appropriate host material.     

A Multifunctional Iridium‐Carbazolyl Orange Phosphor for High‐Performance Two‐Element WOLED Exploiting Exciton‐Managed Fluorescence/Phosphorescence

By attaching a bulky, inductively electron‐withdrawing trifluoromethyl (CF₃) group on the pyridyl ring of the rigid 2‐[3‐ (N‐phenylcarbazolyl)]pyridine cyclometalated ligand, we successfully synthesized a new heteroleptic orange‐emitting phosphorescent iridium(III) complex [Ir( L ₁ )₂(acac)] 1 ( HL ₁ = 5‐trifluoromethyl‐2‐[3‐(N‐phenylcarbazolyl)]pyridine, Hacac = acetylacetone) in good yield. The structural and electronic properties of 1 were examined by X‐ray crystallography and time‐dependent DFT calculations. The influence of CF₃ substituents on the optical, electrochemical and electroluminescence (EL) properties of 1 were studied. We note that incorporation of the carbazolyl unit facilitates the hole‐transporting ability of the complex, and more importantly, attachment of CF₃ group provides an access to a highly efficient electrophosphor for the fabrication of orange phosphorescent organic light‐emitting diodes (OLEDs) with outstanding device performance. These orange OLEDs can produce a maximum current efficiency of ～40 cd A^?1, corresponding to an external quantum efficiency of ～12% ph/el (photons per electron) and a power efficiency of ～24 lm W^?1. Remarkably, high‐performance simple two‐element white OLEDs (WOLEDs) with excellent color stability can be fabricated using an orange triplet‐harvesting emitter 1 in conjunction with a blue singlet‐harvesting emitter. By using such a new system where the host singlet is resonant with the blue fluorophore singlet state and the host triplet is resonant with the orange phosphor triplet level, this white light‐emitting structure can achieve peak EL efficiencies of 26.6 cd A^?1 and 13.5 lm W^?1 that are generally superior to other two‐element all‐fluorophore or all‐phosphor OLED counterparts in terms of both color stability and emission efficiency.     

Novel Blue Bipolar Thermally Activated Delayed Fluorescence Material as Host Emitter for High‐Efficiency Hybrid Warm‐White OLEDs with Stable High Color‐Rendering Index

A novel thermally activated delayed fluorescence (TADF) molecule, PHCz2BP, is synthesized and used to construct high performance organic light‐emitting diodes (OLEDs) in this work. PHCz2BP is not only the neat emitting layer for efficient sky‐blue OLED, with very high peak external quantum efficiency/power efficiency (EQE/PE) values of 4.0%/6.9 lm W^?1, but also acts as a host to sensitize high‐luminance and high‐efficiency green, orange, and red electrophosphorescence with the universal high EQEs of >20%. More importantly, two hybrid white OLEDs based on the double‐layer emitting system of PHCz2BP:green phosphor/PHCz2BP:red phosphor are achieved. To the best of the knowledge, this is the first report for three‐color (blue–green–red) white devices that adopt a TADF blue host emitter and two phosphorescent dopants without any other additional host. Such simple emitting systems thus realized the best electroluminescent performance to date for the WOLEDs utilizing the hybrid TADF/phosphor strategy: forward‐viewing EQEs of 25.1/23.6% and PEs of 24.1/22.5 lm W^?1 at the luminance of 1000 cd m^?2 with the color rendering indexes of 85/87 and warm‐white Commission Internationale de L'Eclairage coordinates of (0.41, 0.46)/(0.42, 0.45), indicating its potential to be used as practical eye‐friendly solid‐state lighting in future.     

White Organic Light‐Emitting Diodes with Evenly Separated Red,Green, and Blue Colors for Efficiency/Color‐Rendition Trade‐Off Optimization

A novel yellowish‐green triplet emitter, bis(5‐(trifluoromethyl)‐2‐p‐tolylpyridine) (acetylacetonate)iridium(III) (1), was conveniently synthesized and used in the fabrication of both monochromatic and white organic light‐emitting diodes (WOLEDs). At the optimal doping concentration, monochromatic devices based on 1 exhibit a high efficiency of 63 cd A^?1 (16.3% and 36.6 lm W^?1) at a luminance of 100 cd m^?2. By combining 1 with a phosphorescent sky‐blue emitter, bis(3,5‐difluoro‐2‐(2‐pyridyl)phenyl)‐(2‐carboxypyridyl)iridium(III) (FIrPic), and a red emitter, bis(2‐benzo[b]thiophen‐2‐yl‐pyridine)(acetylacetonate)iridium(III) (Ir(btp)₂(acac)), the resulting electrophosphorescent WOLEDs show three evenly separated main peaks and give a high efficiency of 34.2 cd A^?1 (13.2% and 18.5 lm W^?1) at a luminance of 100 cd m^?2. When 1 is mixed with a deep‐blue fluorescent emitter, 4,4′‐bis(9‐ethyl‐3‐carbazovinylene)‐1,1′‐biphenyl (BCzVBi), and Ir(btp)₂(acac), the resulting hybrid WOLEDs demonstrate a high color‐rendering index of 91.2 and CIE coordinates of (0.32, 0.34). The efficient and highly color‐pure WOLEDs based on 1 with evenly separated red, green, blue peaks and a high color‐rendering index outperform those of the state‐of‐the‐art emitter, fac‐tris(2‐phenylpyridine)iridium(III) (Ir(ppy)₃), and are ideal candidates for display and lighting applications.     

Highly Efficient Pure‐White‐Light‐Emitting Diodes from a Single Polymer: Polyfluorene with Naphthalimide Moieties

Light‐emitting diodes exhibiting efficient pure‐white‐light electroluminescence have been successfully developed by using a single polymer: polyfluorene derivatives with 1,8‐naphthalimide chromophores chemically doped onto the polyfluorene backbones. By adjusting the emission wavelength of the 1,8‐naphthalimide components and optimizing the relative content of 1,8‐naphthalimide derivatives in the resulting polymers, white‐light electroluminescence from a single polymer, as opposed to a polymer blend, has been obtained in a device with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene)(50 nm)/polymer(80 nm)/Ca(10 nm)/Al(100 nm). The device exhibits Commission Internationale de l'Eclairage coordinates of (0.32,0.36), a maximum brightness of 11 900 cd m^–2, a current efficiency of 3.8 cd A^–1, a power efficiency of 2.0 lm W^–1, an external quantum efficiency of 1.50 %, and quite stable color coordinates at different driving voltages, even at high luminances of over 5000 cd m^–2.     

Solution‐Processible Carbazole Dendrimers as Host Materials for Highly Efficient Phosphorescent Organic Light‐Emitting Diodes

A group of dendrimers with oligo‐carbazole dendrons appended at 4,4′‐ positions of biphenyl core are synthesized for use as host materials for solution‐processible phosphorescent organic light‐emitting diodes (PHOLEDs). In comparison with the traditional small molecular host 4,4′‐N,N′‐dicarbazolebiphenyl (CBP), the dendritic conformation affords these materials extra merits including amorphous nature with extremely high glass transition temperatures (ca. 376 °C) and solution‐processibility, but inherent the identical triplet energies (2.60–2.62 eV). In comparison with the widely‐used polymeric host polyvinylcarbazole (PVK), these dendrimers possess much higher HOMO levels (–5.61 to –5.42 eV) that facilitate efficient hole injection and are favorable for high power efficiency in OLEDs. The agreeable properties and the solution‐processibility of these dendrimers makes it possible to fabricate highly efficient PHOLEDs by spin coating with the dendimers as phosphorescent hosts. The green PHOLED containing Ir(ppy)₃ (Hppy = 2‐phenyl‐pyridine) dopant exhibits high peak efficiencies of 38.71 cd A^?1 and 15.69 lm W^?1, which far exceed those of the control device with the PVK host (27.70 cd A^?1 and 9.6 lm W^?1) and are among the best results for solution‐processed green PHOLEDs ever reported. The versatility of these dendrimer hosts can be spread to orange PHOLEDs and high efficiencies of 32.22 cd A^?1 and 20.23 lm W^?1 are obtained, among the best ever reported for solution‐processed orange PHOLEDs.     

Extremely Low Operating Voltage Green Phosphorescent Organic Light‐Emitting Devices

Organic light‐emitting devices (OLEDs) are expected to be adopted as the next generation of general lighting because they are more efficient than fluorescent tubes and are mercury‐free. The theoretical limit of operating voltage is generally believed to be equal to the energy gap, which corresponds to the energy difference between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) for the emitter molecule divided by the electron charge (e). Here, green OLEDs operating below a theoretical limit of the energy gap (E_g) voltage with high external quantum efficiency over 20% are demonstrated using fac‐tris(2‐phenylpyridine)iridium(III) with a peak emission wavelength of 523 nm, which is equivalent to a photon energy of 2.38 eV. An optimized OLED operates clearly below the theoretical limit of the E_g voltage at 2.38 V showing 100 cd m^?2 at 2.25 V and 5000 cd m^?2 at 2.95 V without any light outcoupling enhancement techniques.     

Efficient Light‐Emitting Devices Based on Phosphorescent Polyhedral Oligomeric Silsesquioxane Materials

Synthesis, photophysical, and electrochemical characterizations of iridium‐complex anchored polyhedral oligomeric silsesquioxane (POSS) macromolecules are reported. Monochromatic organic light‐emitting devices based on these phosphorescent POSS materials show peak external quantum efficiencies in the range of 5–9%, which can be driven at a voltage less than 10 V for a luminance of 1000 cd m^?2. The white‐emitting devices with POSS emitters show an external quantum efficiency of 8%, a power efficiency of 8.1 lm W^?1, and Commission International de'lÉclairage coordinates of (0.36, 0.39) at 1000 cd m^?2. Encouraging efficiency is achieved in the devices based on hole‐transporting and Ir‐complex moieties dual‐functionalized POSS materials without using host materials, demonstrating that triplet‐dye and carrier‐transporting moieties functionalized POSS material is a viable approach for the development of solution‐processable electrophosphorescent devices.