首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Highly efficient and stable blue phosphorescent organic light‐emitting diodes are achieved by employing a step‐wise graded doping of platinum(II) 9‐(pyridin‐2‐yl)‐2‐(9‐(pyridin‐2‐yl)‐9H‐carbazol‐2‐yloxy)‐9H‐carbazole (PtNON) in a device setting. A device employing PtNON demonstrates a high peak external quantum efficiency (EQE) of 17.4% with an estimated LT70 lifetime of over 1330 h at a brightness of 1000 cd m?2. PtNON is then investigated as a “triplet sensitizer” in an alternating donor–acceptor doped emissive layer to further improve the device emission color purity by carefully managing an efficient Förster resonant energy transfer from PtNON to 2,5,8,11‐tetra‐tert‐butylperylene as a selected acceptor material. Thus, such OLED devices demonstrate an EQE of 16.9% with color coordinates of (0.16, 0.25) and an estimated luminance (LT70) lifetime of 628 h at a high brightness of 1000 cd m?2.  相似文献   

2.
Polymer light‐emitting electrochemical cells (LECs) offer an attractive opportunity for low‐cost production of functional devices in flexible and large‐area configurations, but the critical drawback in comparison to competing light‐emission technologies is a limited operational lifetime. Here, it is demonstrated that it is possible to improve the lifetime by straightforward and motivated means from a typical value of a few hours to more than one month of uninterrupted operation at significant brightness (>100 cd m?2) and relatively high power conversion efficiency (2 lm W?1 for orange‐red emission). Specifically, by optimizing the composition of the active material and by employing an appropriate operational protocol, a desired doping structure is designed and detrimental chemical and electrochemical side reactions are identified and minimized. Moreover, the first functional flexible LEC with a similar promising device performance is demonstrated.  相似文献   

3.
Solution‐processed oxide thin films are actively pursued as hole‐injection layers (HILs) in quantum‐dot light‐emitting diodes (QLEDs), aiming to improve operational stability. However, device performance is largely limited by inefficient hole injection at the interfaces of the oxide HILs and high‐ionization‐potential organic hole‐transporting layers. Solution‐processed NiOx films with a high and stable work function of ≈5.7 eV achieved by a simple and facile surface‐modification strategy are presented. QLEDs based on the surface‐modified NiOx HILs show driving voltages of 2.1 and 3.3 V to reach 1000 and 10 000 cd m?2, respectively, both of which are the lowest among all solution‐processed LEDs and vacuum‐deposited OLEDs. The device exhibits a T95 operational lifetime of ≈2500 h at an initial brightness of 1000 cd m?2, meeting the commercialization requirements for display applications. The results highlight the potential of solution‐processed oxide HILs for achieving efficient‐driven and long‐lifetime QLEDs.  相似文献   

4.
Light‐emitting diodes exhibiting efficient pure‐white‐light electroluminescence have been successfully developed by using a single polymer: polyfluorene derivatives with 1,8‐naphthalimide chromophores chemically doped onto the polyfluorene backbones. By adjusting the emission wavelength of the 1,8‐naphthalimide components and optimizing the relative content of 1,8‐naphthalimide derivatives in the resulting polymers, white‐light electroluminescence from a single polymer, as opposed to a polymer blend, has been obtained in a device with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene)(50 nm)/polymer(80 nm)/Ca(10 nm)/Al(100 nm). The device exhibits Commission Internationale de l'Eclairage coordinates of (0.32,0.36), a maximum brightness of 11 900 cd m–2, a current efficiency of 3.8 cd A–1, a power efficiency of 2.0 lm W–1, an external quantum efficiency of 1.50 %, and quite stable color coordinates at different driving voltages, even at high luminances of over 5000 cd m–2.  相似文献   

5.
Organic light‐emitting diodes (OLEDs) have great potential applications in display and solid‐state lighting. Stability, cost, and blue emission are key issues governing the future of OLEDs. The synthesis and photoelectronics of a series of three kinds of binaphthyl (BN) derivatives are reported. BN1–3 are “melting‐point‐less” and highly stable materials, forming very good, amorphous, glass‐like films. They decompose at temperatures as high as 485–545 °C. At a constant current density of 25 mA cm?2, an ITO/BN3/Al single‐layer device has a much‐longer lifetime (>80 h) than that of an ITO/NPB/Al single‐layer device (8 h). Also, the lifetime of a multilayer device based on BN1 is longer than a similar device based on NPB. BNs are efficient and versatile OLED materials: they can be used as a hole‐transport layer (HTL), a host, and a deep‐blue‐light‐emitting material. This versatility may cut the cost of large‐scale material manufacture. More importantly, the deep‐blue electroluminescence (emission peak at 444 nm with CIE coordinates (0.16, 0.11), 3.23 cd A?1 at 0.21 mA cm?2, and 25200 cd m?2 at 9 V) remains very stable at very high current densities up to 1000 mA cm?2.  相似文献   

6.
Organic light‐emitting diodes based on intramolecular‐charge‐transfer emission from two related donor–acceptor (D–A) molecules, 3,7‐[bis(4‐phenyl‐2‐quinolyl)]‐10‐methylphenothiazine (BPQ‐MPT) and 3,6‐[bis(4‐phenyl‐2‐quinolyl)]‐9‐methylcarbazole (BPQ‐MCZ), were found to have electroluminescence (EL) efficiencies and device brightnesses that differ by orders of magnitude. High brightness (> 40 000 cd m–2) and high efficiency (21.9 cd A–1, 10.8 lm W–1, 5.78 % external quantum efficiency (EQE) at 1140 cd m–2) green EL was achieved from the BPQ‐MPT emitter, which has its highest occupied molecular orbital (HOMO) level at 5.09 eV and a nonplanar geometry. In contrast, diodes with much lower brightness (2290 cd m–2) and efficiency (1.4 cd A–1, 0.66 lm W–1, 1.7 % EQE at 405 cd m–2) were obtained from the BPQ‐MCZ emitter, which has its HOMO level at 5.75 eV and exhibits a planar geometry. Compared to BPQ‐MCZ, the higher‐lying HOMO level of BPQ‐MPT facilitates more efficient hole injection/transport and a higher charge‐recombination rate, while its nonplanar geometry ensures diode color purity. White EL was observed from BPQ‐MCZ diodes owing to a blue intramolecular charge‐transfer emission and a yellow–orange intermolecular excimer emission, enabled by the planar molecular geometry. These results demonstrate that high‐performance light‐emitting devices can be achieved from intramolecular charge‐transfer emission, while highlighting the critical roles of the electron‐donor strength and the molecular geometry of D–A molecules.  相似文献   

7.
Enhancing the efficiency and lifetime of light emitting electrochemical cells (LEC) is the most important challenge on the way to energy efficient lighting devices of the future. To avail this, emissive Ir(III) complexes with fluoro‐substituted cyclometallated ligands and electron donating groups (methyl and tert ‐butyl)‐substituted diimine ancillary (N^N) ligands and their associated LEC devices are studied. Four different complexes of general composition [Ir(4ppy)2(N^N)][PF6] (4Fppy = 2‐(4‐fluorophenyl)pyridine) with the N^N ligand being either 2,2′‐bipyridine ( 1 ), 4.4′‐dimethyl‐2,2′‐bipyridine ( 2 ), 5.5′‐dimethyl‐2,2′‐bipyridine ( 3 ), or 4.4′‐di‐tert ‐butyl‐2,2′‐bipyridine ( 4 ) are synthesized and characterized. All complexes emit in the green region of light with emission maxima of 529–547 nm and photoluminescence quantum yields in the range of 50.6%–59.9%. LECs for electroluminescence studies are fabricated based on these complexes. The LEC based on ( 1 ) driven under pulsed current mode demonstrated the best performance, reaching a maximum luminance of 1605 cd m?2 resulting in 16 cd A?1 and 8.6 lm W?1 for current and power efficiency, respectively, and device lifetime of 668 h. Compared to this, LECs based on ( 3 ) and ( 4 ) perform lower, with luminance and lifetime of 1314 cd m?2, 45.7 h and 1193 cd m?2, 54.9 h, respectively. Interestingly, in contrast to common belief, the fluorine content of the Ir‐iTMCs does not adversely affect the LEC performance, but rather electron donating substituents on the N^N ligands are found to dramatically reduce both performance and stability of the green LECs. In light of this, design concepts for green light emitting electrochemical devices have to be reconsidered.  相似文献   

8.
Low color temperature (CT) lighting provides a warm and comfortable atmosphere and shows mild effect on melatonin suppression. A high-efficiency low CT organic light emitting diode can be easily fabricated by spin coating a single white emission layer. The resultant white device shows an external quantum efficiency (EQE) of 22.8% (34.9 lm/W) with CT 2860 K at 100 cd/m2, while is shown 18.8% (24.5 lm/W) at 1000 cd/m2. The high efficiency may be attributed to the use of electroluminescence efficient materials and the ambipolar-transport host. Besides, proper device architecture design enables excitons to form on the host and allows effective energy transfer from host to guest or from high triplet guest to low counterparts. By decreasing the doping concentration of blue dye in the white emission layer, the device exhibited an orange emission with a CT of 2280 K. An EQE improvement was observed for the device, whose EQE was 27.4% (38.8 lm/W) at 100 cd/m2 and 20.4% (24.6 lm/W) at 1000 cd/m2.  相似文献   

9.
The aggregation‐induced emission (AIE) phenomenon is important in organic light‐emitting diodes (OLEDs), for it can potentially solve the aggregation‐caused quenching problem. However, the performance of AIE fluorophor‐based OLEDs (AIE OLEDs) is unsatisfactory, particularly for deep‐blue devices (CIEy < 0.15). Here, by enhancing the device engineering, a deep‐blue AIE OLED exhibits low voltage (i.e., 2.75 V at 1 cd m?2), high luminance (17 721 cd m?2), high efficiency (4.3 lm W?1), and low efficiency roll‐off (3.6 lm W?1 at 1000 cd m?2), which is the best deep‐blue AIE OLED. Then, blue AIE fluorophors, for the first time, have been demonstrated to achieve high‐performance hybrid white OLEDs (WOLEDs). The two‐color WOLEDs exhibit i) stable colors and the highest efficiency among pure‐white hybrid WOLEDs (32.0 lm W?1); ii) stable colors, high efficiency, and very low efficiency roll‐off; or iii) unprecedented efficiencies at high luminances (i.e., 70.2 cd A?1, 43.4 lm W?1 at 10 000 cd m?2). Moreover, a three‐color WOLED exhibits wide correlated color temperatures (10 690–2328 K), which is the first hybrid WOLED showing sunlight‐style emission. These findings will open a novel concept that blue AIE fluorophors are promising candidates to develop high‐performance hybrid WOLEDs, which have a bright prospect for the future displays and lightings.  相似文献   

10.
Highly power‐efficient white organic light‐emitting diodes (OLEDs) are still challenging to make for applications in high‐quality displays and general lighting due to optical confinement and energy loss during electron‐photon conversion. Here, an efficient white OLED structure is shown that combines deterministic aperiodic nanostructures for broadband quasi‐omnidirectional light extraction and a multilayer energy cascade structure for energy‐efficient photon generation. The external quantum efficiency and power efficiency are raised to 54.6% and 123.4 lm W?1 at 1000 cd m?2. An extremely small roll‐off in efficiency at high luminance is also obtained, yielding a striking value of 106.5 lm W?1 at 5000 cd m?2. In addition to a substantial increase in efficiency, this device structure simultaneously offers the superiority of angular color stability over the visible wavelength range compared to conventional OLEDs. It is anticipated that these findings could open up new opportunities to promote white OLEDs for commercial applications.  相似文献   

11.
An efficient orange‐light‐emitting polymer (PFTO‐BSeD5) has been developed through the incorporation of low‐bandgap benzoselenadiazole (BSeD) moieties into the backbone of a blue‐light‐emitting polyfluorene copolymer (PFTO poly{[9,9‐bis(4‐(5‐(4‐tert‐butylphenyl)‐[1,3,4]‐oxadiazol‐2‐yl)phenyl)‐9′,9′‐di‐n‐octyl‐[2,2′]‐bifluoren‐7,7′‐diyl]‐stat‐[9,9‐bis(4‐(N,N‐di(4‐n‐butylphenyl)amino)phenyl)‐9′,9′‐di‐n‐octyl‐[2,2′]‐bifluoren‐7,7′‐diyl]}) that contains hole‐transporting triphenylamine and electron‐transporting oxadiazole pendent groups. A polymer light‐emitting device based on this copolymer exhibits a strong, bright‐orange emission with Commission Internationale de L'Eclairage (CIE) color coordinates (0.45,0.52). The maximum brightness is 13 716 cd m–2 and the maximum luminance efficiency is 5.53 cd A–1. The use of blends of PFTO‐BSeD5 in PFTO leads to efficient and stable white‐light‐emitting diodes—at a doping concentration of 9 wt %, the device reaches its maximum external quantum efficiency of 1.64 % (4.08 cd A–1). The emission color remains almost unchanged under different bias conditions: the CIE coordinates are (0.32,0.33) at 11.0 V (2.54 mA cm–2, 102 cd m–2) and (0.31,0.33) at 21.0 V (281 mA cm–2, 7328 cd m–2). These values are very close to the ideal CIE chromaticity coordinates for a pure white color (0.33,0.33).  相似文献   

12.
Phosphorescent organic light emitting diodes (PHOLEDs) have undergone tremendous growth over the past two decades. Indeed, they are already prevalent in the form of mobile displays, and are expected to be used in large‐area flat panels recently. To become a viable technology for next generation solid‐state light source however, PHOLEDs face the challenge of achieving concurrently a high color rendering index (CRI) and a high efficiency at high luminance. To improve the CRI of a standard three color white PHOLED, one can use a greenish‐yellow emitter to replace the green emitter such that the gap in emission wavelength between standard green and red emitters is eliminated. However, there are relatively few studies on greenish‐yellow emitters for PHOLEDs, and as a result, the performance of greenish‐yellow PHOLEDs is significantly inferior to those emitting in the three primary colors, which are driven strongly by the display industry. Herein, a newly synthesized greenish‐yellow emitter is synthesized and a novel device concept is introduced featuring interzone exciton transfer to considerably enhance the device efficiency. In particular, high external quantum efficiencies (current efficiencies) of 21.5% (77.4 cd/A) and 20.2% (72.8 cd/A) at a luminance of 1000 cd/m2 and 5000 cd/m2, respectively, have been achieved. These efficiencies are the highest reported to date for greenish‐yellow emitting PHOLEDs. A model for this unique design is also proposed. This design could potentially be applied to enhance the efficiency of even longer wavelength yellow and red emitters, thereby paving the way for a new avenue of tandem white PHOLEDs for solid‐state lighting.  相似文献   

13.
Efficiency roll‐off in blue organic light‐emitting diodes especially at high brightness still remains a vital issue for which the excitons density‐dependent mechanism of host materials takes most responsibility. Additionally, the efficiency roll‐off leads to high power consumption and reduces the operating lifetime because higher driving voltage and current are required. Here, by subtly modifying the triphenylamine to oxygen‐bridged quasi‐planar structure, a novel thermally activated delayed fluorescence type blue host Tri‐o‐2PO is successfully developed. Efficiency roll‐off based on Tri‐o‐2PO is ultralow with external quantum efficiency (EQE) just dropping by around 2% in the high luminance range from 1000 cd m?2 to 10 000 cd m?2. As expected, low turn‐on voltage (≈2.9 V) of device is also achieved, which is close to the theory limit value (≈2.62 V). Super‐high power efficiency (≈60 lm W?1) and EQE (>22%) are also achieved when utilizing Tri‐o‐2PO as host. Furthermore, two‐color warm‐white light with CIE of (0.45, 0.43) and correlated color temperature of 2921 K is also fabricated and a champion EQE of 21% is delivered. These excellent performances prove the strategy of bridging the triphenylamine to reduce ΔEst is validated and suggest the great potential of this novel skeleton.  相似文献   

14.
Recently, a new route to achieve 100% internal quantum efficiency white organic light‐emitting diodes (WOLEDs) is proposed by utilizing noble‐metal‐free thermally activated delayed fluorescence (TADF) emitters due to the radiative contributions of triplet excitons by effective reverse intersystem crossing. However, a systematic understanding of their reliability and internal degradation mechanisms is still deficient. Here, it demonstrates high performance and operational stable purely organic fluorescent WOLEDs consisting of a TADF assistant host via a strategic exciton management by multi‐interlayers. By introducing such interlayers, carrier recombination zone could be controlled to suppress the generally unavoidable quenching of long‐range triplet excitons, successfully achieving remarkable external quantum efficiency of 15.1%, maximum power efficiency of 48.9 lm W−1, and extended LT50 lifetime (time to 50% of initial luminance of 1000 cd m−2) exceeding 2000 h. To this knowledge, this is the first pioneering work for realizing high efficiency, low efficiency roll‐off, and operational stable WOLEDs based on a TADF assistant host. The current findings also indicate that broadening the carrier recombination region in both interlayers and yellow emitting layer as well as restraining exciplex quenching at carrier blocking interface make significant roles on reduced efficiency roll‐off and enhanced operational lifetime.  相似文献   

15.
White organic light‐emitting diodes (WOLEDs) with thermally activated delayed fluorophor sensitized fluorescence (TSF) have aroused wide attention, considering their potential for full exciton utilization without noble‐metal containing phosphors. However, performances of TSF‐WOLEDs with a single‐emissive‐layer (SEL) still suffer from low exciton utilization and insufficient blue emission for proper white balance. Here, by modulating Förster and Dexter interactions in SEL‐TSF‐WOLEDs, high efficiencies, balanced white spectra, and extended lifetimes are realized simultaneously. Given the different dependencies of Förster and Dexter interactions on intermolecular distances, sterically shielded blue thermally activated delayed fluorescence (TADF) emitters and orange conventional fluorescent dopants (CFDs) with electronically inert peripheral units are adopted to enlarge distances of electronically active chromophores, not only blocking the Dexter interaction to prevent exciton loss but also finely suppressing the Förster one to guarantee balanced white emission with sufficient blue components. It thus provides the possibility to maximize device performances in a large range of CFD concentrations. A record high maximum external quantum efficiency/power efficiency of 19.6%/52.2 lm W?1, Commission Internationale de L'Eclairage coordinate of (0.33, 0.45), and prolonged half‐lifetime of over 2300 h at an initial luminance of 1000 cd m?2 are realized simultaneously for SEL‐TSF‐WOLEDs, paving the way toward practical applications.  相似文献   

16.
Organic light‐emitting diodes (OLEDs) can promise flexible, light weight, energy conservation, and many other advantages for next‐generation display and lighting applications. However, achieving efficient blue electroluminescence still remains a challenge. Though both phosphorescent and thermally activated delayed fluorescence materials can realize high‐efficiency via effective triplet utilization, they need to be doped into appropriate host materials and often suffer from certain degree of efficiency roll‐off. Therefore, developing efficient blue‐emitting materials suitable for nondoped device with little efficiency roll‐off is of great significance in terms of practical applications. Herein, a phenanthroimidazole?anthracene blue‐emitting material is reported that can attain high efficiency at high luminescence in nondoped OLEDs. The maximum external quantum efficiency (EQE) of nondoped device is 9.44% which is acquired at the luminescence of 1000 cd m?2. The EQE is still as high as 8.09% even the luminescence reaches 10 000 cd m?2. The maximum luminescence is ≈57 000 cd m?2. The electroluminescence (EL) spectrum shows an emission peak of 470 nm and the Commission International de L'Eclairage (CIE) coordinates is (0.14, 0.19) at the voltage of 7 V. To the best of the knowledge, this is among the best results of nondoped blue EL devices.  相似文献   

17.
New single‐polymer electroluminescent systems containing two individual emission species—polyfluorenes as a blue host and 2,1,3‐benzothiadiazole derivative units as an orange dopant on the main chain—have been designed and synthesized by Wang and co‐workers on p. 957. The resulting single polymers are found to have highly efficient white electroluminescence with simultaneous blue and orange emission from the corresponding emitting species. A single‐layer device has been fabricated that has performance characteristics roughly comparable to those of organic white‐light‐emitting diodes with multilayer device structures. New single‐polymer electroluminescent systems containing two individual emission species—polyfluorenes as a blue host and 2,1,3‐benzothiadiazole derivative units as an orange dopant on the main chain—have been designed and synthesized. The resulting single polymers are found to have highly efficient white electroluminescence with simultaneous blue (λmax = 421 nm/445 nm) and orange emission (λmax = 564 nm) from the corresponding emitting species. The influence of the photoluminescence (PL) efficiencies of both the blue and orange species on the electroluminescence (EL) efficiencies of white polymer light‐emitting diodes (PLEDs) based on the single‐polymer systems has been investigated. The introduction of the highly efficient 4,7‐bis(4‐(N‐phenyl‐N‐(4‐methylphenyl)amino)phenyl)‐2,1,3‐benzothiadiazole unit to the main chain of polyfluorene provides significant improvement in EL efficiency. For a single‐layer device fabricated in air (indium tin oxide/poly(3,4‐ethylenedioxythiophene): poly(styrene sulfonic acid/polymer/Ca/Al), pure‐white electroluminescence with Commission Internationale de l'Eclairage (CIE) coordinates of (0.35,0.32), maximum brightness of 12 300 cd m–2, luminance efficiency of 7.30 cd A–1, and power efficiency of 3.34 lm W–1 can be obtained. This device is approximately two times more efficient than that utilizing a single polyfluorene containing 1,8‐naphthalimide moieties, and shows remarkable improvement over the corresponding blend systems in terms of efficiency and color stability. Thermal treatment of the single‐layer device before cathode deposition leads to the further improvement of the device performance, with CIE coordinates of (0.35,0.34), turn‐on voltage of 3.5 V, luminance efficiency of 8.99 cd A–1, power efficiency of 5.75 lm W–1, external quantum efficiency of 3.8 %, and maximum brightness of 12 680 cd m–2. This performance is roughly comparable to that of white organic light‐emitting diodes (WOLEDs) with multilayer device structures and complicated fabrication processes.  相似文献   

18.
Fluorescent emitters have regained intensive attention in organic light emitting diode (OLED) community owing to the breakthrough of the device efficiency and/or new emitting mechanism. This provides a good chance to develop new near‐infrared (NIR) fluorescent emitter and high‐efficiency device. In this work, a D‐π‐A‐π‐D type compound with naphthothiadiazole as acceptor, namely, 4,4′‐(naphtho[2,3‐c][1,2,5]thiadiazole‐4,9‐diyl)bis(N,N ‐diphenylaniline) (NZ2TPA), is designed and synthesized. The photophysical study and density functional theory analysis reveal that the emission of the compound has obvious hybridized local and charge‐transfer (HLCT) state feature. In addition, the compound shows aggregation‐induced emission (AIE) characteristic. Attributed to its HLCT mechanism and AIE characteristic, NZ2TPA acquires an unprecedentedly high photoluminescent quantum yield of 60% in the neat film, which is the highest among the reported organic small‐molecule NIR emitters and even exceeds most phosphorescent NIR materials. The nondoped devices based on NZ2TPA exhibit excellent performance, achieving a maximum external quantum efficiency (EQE) of 3.9% with the emission peak at 696 nm and a high luminance of 6330 cd m?2, which are among the highest in the reported nondoped NIR fluorescent OLEDs. Moreover, the device remains a high EQE of 2.8% at high brightness of 1000 cd m?2, with very low efficiency roll‐off.  相似文献   

19.
The unique and unprecedented electroluminescence behavior of the white‐emitting molecule 3‐(1‐(4‐(4‐(2‐(2‐hydroxyphenyl)‐4,5‐diphenyl‐1H‐imidazol‐1‐yl)phenoxy)phenyl)‐4,5‐diphenyl‐1H‐imidazol‐2‐yl)naphthalen‐2‐ol (W1), fluorescence emission from which is controlled by the excited‐state intramolecular proton transfer (ESIPT) is investigated. W1 is composed of covalently linked blue‐ and yellow‐color emitting ESIPT moieties between which energy transfer is entirely frustrated. It is demonstrated that different emission colors (blue, yellow, and white) can be generated from the identical emitter W1 in organic light‐emitting diode (OLED) devices. Charge trapping mechanism is proposed to explain such a unique color‐tuned emission from W1. Finally, the device structure to create a color‐stable, color reproducible, and simple‐structured white organic light‐emitting diode (WOLED) using W1 is investigated. The maximum luminance efficiency, power efficiency, and luminance of the WOLED were 3.10 cd A?1, 2.20 lm W?1, 1 092 cd m?2, respectively. The WOLED shows white‐light emission with the Commission Internationale de l′Eclairage (CIE) chromaticity coordinates (0.343, 0.291) at a current level of 10 mA cm?2. The emission color is high stability, with a change of the CIE chromaticity coordinates as small as (0.028, 0.028) when the current level is varied from 10 to 100 mA cm?2.  相似文献   

20.
A new series of charge neutral Os(II) pyridyl azolate complexes with either bis(diphenylphosphino)methane (dppm) or cis‐1,2‐bis(diphenylphosphino)ethene (dppee) chelates were synthesized, and their structural, electrochemical, photophysical properties and thermodynamic relationship were established. For the dppm derivatives 3a and 4a , the pyridyl azolate chromophores adopt an eclipse orientation with both azolate segments aligned trans to each other, and with the pyridyl groups resided the sites that are opposite to the phosphorus atoms. In sharp contrast, the reactions with dppee ligand gave rise to the formation of two structural isomers for all three kind of azole chromophores, with both azolate or neutral heterocycles (i.e., pyridyl or isoquinolinyl fragments) located at the mutual trans‐disposition around the Os metal (denoted as series of a and b complexes). These chelating phosphines Os(II) complexes show remarkably high thermal stability, among which and several exhibit nearly unitary phosphorescence yield in deaerated solution at RT. A polymer light‐emitting device (PLED) prepared using 0.4 mol % of 5a as dopant in a blend of poly(vinylcarbazole) (PVK) and 30 wt % of 2‐tert‐butylphenyl‐5‐biphenyl‐1,3,4‐oxadiazole (PBD) exhibits yellow emission with brightness of 7208 cd m–2, an external quantum efficiency of 10.4 % and luminous efficiency of 36.1 cd A–1 at current density of 20 mA cm–2. Upon changing to 1.6 mol % of 6a , the result showed even better brightness of 9212 cd m–2, external quantum efficiency of 12.5 % and luminous efficiency of 46.1 cd A–1 at 20 mA cm–2, while the max. external quantum efficiency of both devices reaches as high as 11.7 % and 13.3 %, respectively. The high PL quantum efficiency, non‐ionic nature, and short radiative lifetime are believed to be the determining factors for this unprecedented achievement.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号