Benzobisthiazole as Weak Donor for Improved Photovoltaic Performance: Microwave Conductivity Technique Assisted Molecular Engineering

New donor–acceptor‐type copolymers comprised of benzobisthiazole (BBTz) as a weak donor rather than acceptor are proposed. This approach can simultaneously lead to deepening the HOMO and LUMO of the polymers with moderate energy offset against fullerene derivatives in bulk heterojunction organic photovoltaics. As a proof‐of‐concept, BBTz‐based random copolymers conjugated with typical electron acceptors: thienopyrroledione (TPD) and benzothiadiazole (BT) based on density functional theory calculations are synthesized. Laser‐flash and Xe‐flash time‐resolved microwave conductivity (TRMC) evaluations of polymer:[6,6]‐phenyl C₆₁ butyric acid methyl ester (PCBM) blends are conducted to screen the feasibility of the copolymers, leading to optimization of processing conditions for photovoltaic device application. According to the TMRC results, alternating BBTz‐BT copolymers are designed, exhibiting extended photoabsorption up to ca. 750 nm, deep HOMO (–5.5 to –5.7 eV), good miscibility with PCBM, and inherent crystalline nature. Moreover, the maximized PCE of 3.8%, the top‐class among BBTz‐based polymers reported so far, is realized in an inverted cell using TiO_x and MoO_x as the buffer layers. This study opens up opportunities to create low‐bandgap polymers with deep HOMO, and shows how the device‐less TRMC evaluation is of help for decision‐making on judicious molecular design.     

Solar Cells: Performance Optimization of Polymer Solar Cells Using Electrostatically Sprayed Photoactive Layers (Adv. Funct. Mater. 20/2010)

Polymer solar cells (PSCs) are fabricated using a novel film deposition method, the electrostatic spray (e‐spray) technique. Stable atomization and uniform deposition of the polymer blend by e‐spray are achieved by manipulating the solution concentration, the solvent composition, and the electric field. The performance of PSCs is primarily influenced by the inherent film morphology of the e‐sprayed polymer‐blend active layers, which is significantly different from that of the conventional films that are formed using the spin‐coating (SC) method. The intrinsically formed interfacial boundaries between the e‐sprayed blend pancakes resist charge transport, which unfavorably influences device efficiency. The internal series resistance (R_S) of the PSCs that are formed using the e‐spray method (e‐spray‐PSC) is significantly reduced by a solvent vapor soaking (SVS) treatment in addition to the conventional thermodynamic nanomorphology controls. The detailed relationship between the morphologies (film morphology and internal nanomorphology) and the R_S is revealed using impedance spectroscopy. The performance of the e‐spray‐PSCs is comparable to those of the PSCs that are fabricated using the SC method under identical conditions. Therefore, the e‐spray method can be used to fabricate ultralow‐cost PSCs, because of the performance results combined with the intrinsic advantages that the e‐spray method is simple and has a low materials loss.