Solution‐Processed Thermally Activated Delayed Fluorescent OLED with High EQE as 31% Using High Triplet Energy Crosslinkable Hole Transport Materials

Solution‐processed organic light‐emitting diodes (OLEDs) with thermally activated delayed fluorescent (TADF) material as emitter have attracted much attention because of their low cost and high performance. However, exciton quench at the interface between the hole injection layer, poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), and emitting layer (EML) in devices can lead to low device performance. Here, a novel high triplet energy (2.89 eV) and crosslinkable hole‐transporting material grafted with oxetane groups, N,N‐bis(4‐(6‐((3‐ethyloxetan‐3‐yl)methoxy)hexyloxy)phenyl)‐3,5‐di(9H‐carbazol‐9‐yl)benzenamine (Oxe‐DCDPA)), as crosslinked hole transport layer (HTL) into the interface of PEDOT:PSS layer and EML is proposed for prevention of exciton quenching, and among the reported devices with single HTL in solution‐processed TADF‐OLED, the highest external quantum efficiency (EQE)/luminous efficiency (η_L) of 26.1%/94.8 cd A^?1 and 24.0%/74.0 cd A^?1 are achieved for green emission (DACT‐II as emitter) and bluish‐green emission (DMAC‐TRZ as emitter), respectively. Further improvement, using double HTLs, composed of N,N′‐bis(4‐(6‐((3‐ethyloxetan‐3‐yl)methoxy))‐hexylphenyl)‐N,N′‐diphenyl‐4,4′‐diamine with high hole mobility and Oxe‐DCDPA with high triplet energy, leads to the highest EQE/η_L of 30.8%/111.9 cd A^?1 and 27.2%/83.8 cd A^?1 for green emission and bluish‐green emission, respectively. These two devices show the high maximum brightness of 81 100 and 70 000 cd m^?2, respectively.     

Highly Efficient Simple‐Structure Blue and All‐Phosphor Warm‐White Phosphorescent Organic Light‐Emitting Diodes Enabled by Wide‐Bandgap Tetraarylsilane‐Based Functional Materials

Two host materials of {4‐[diphenyl(4‐pyridin‐3‐ylphenyl)silyl]phenyl}diphenylamine (p‐PySiTPA) and {4‐[[4‐(diphenylphosphoryl)phenyl](diphenyl)silyl]phenyl}diphenylamine (p‐POSiTPA), and an electron‐transporting material of [(diphenylsilanediyl)bis(4,1‐phenylene)]bis(diphenylphosphine) dioxide (SiDPO) are developed by incorporating appropriate charge transporting units into the tetraarylsilane skeleton. The host materials feature both high triplet energies (ca. 2.93 eV) and ambipolar charge transporting nature; the electron‐transporting material comprising diphenylphosphine oxide units and tetraphenylsilane skeleton exhibits a high triplet energy (3.21 eV) and a deep highest occupied molecular orbital (HOMO) level (‐6.47 eV). Using these tetraarylsilane‐based functional materials results in a high‐efficiency blue phosphorescent device with a three‐organic‐layer structure of 1,1‐bis[4‐[N,N‐di(p‐tolyl)‐amino]phenyl]cyclohexane (TAPC)/p‐POSiTPA: iridium(III) bis(4′,6′‐difluorophenylpyridinato)tetrakis(1‐pyrazolyl)borate (FIr6)/SiDPO that exhibits a forward‐viewing maximum external quantum efficiency (EQE) up to 22.2%. This is the first report of three‐organic‐layer FIr6‐based blue PhOLEDs with the forward‐viewing EQE over 20%, and the device performance is among the highest for FIr6‐based blue PhOLEDs even compared with the four or more than four organic‐layer devices. Furthermore, with the introduction of bis(2‐(9,9‐diethyl‐9H‐fluoren‐2‐yl)‐1‐phenyl‐1H‐benzoimidazol‐N,C³)iridium acetylacetonate [(fbi)₂Ir(acac)] as an orange emitter, an all‐phosphor warm‐white PhOLED achieves a peak power efficiency of 47.2 lm W^?1, which is close to the highest values ever reported for two‐color white PhOLEDs.     

An Exciplex Forming Host for Highly Efficient Blue Organic Light Emitting Diodes with Low Driving Voltage

The exciplex forming co‐host with phosphorescent dopant system has potential to realize highly efficient phosphorescent organic light emitting didoes (PhOLEDs). However, the exciplex forming co‐host for blue phosphorescent OLEDs has been rarely introduced because of higher triplet level of the blue dopant than green and red dopants. In this work, a novel exciplex forming co‐host with high triplet energy level is developed by mixing a phosphine oxide based electron transporting material, PO‐T2T, and a hole transporting material, N,N′‐dicarbazolyl‐3,5‐benzene (mCP). Photo‐physical analysis shows that the exciplexes are formed efficiently in the host and the energy transfer from the exciplex to blue phosphorescent dopant (iridium(III)bis[(4,6‐difluorophenyl)‐pyridinato‐N,C2′]picolinate; FIrpic) is also efficient, enabling the triplet harvest without energy loss. As a result, an unprecedented high performance blue PhOLED with the exciplex forming co‐host is demonstrated, showing a maximum external quantum efficiency (EQE) of 30.3%, a maximum power efficiency of 66 lm W^?1, and low driving voltage of 2.75 at 100 cd m^?2, 3.29 V at 1000 cd m^?2, and 4.65 V at 10 000 cd m^?2, respectively. The importance of the exciton confinement in the exciplex forming co‐host is further investigated which is directly related to the performance of PhOLEDs.     

Tuning the Optoelectronic Properties of Carbazole/Oxadiazole Hybrids through Linkage Modes: Hosts for Highly Efficient Green Electrophosphorescence

A series of bipolar transport host materials: 2,5‐bis(2‐(9H‐carbazol‐9‐yl)phenyl)‐1,3,4‐oxadiazole (o‐CzOXD) ( 1 ), 2,5‐bis(4‐(9H‐carbazol‐9‐yl)phenyl)‐1,3,4‐oxadiazole (p‐CzOXD) ( 2 ), 2,5‐bis(3‐(9H‐carbazol‐9‐yl)phenyl)‐1,3,4‐oxadiazole (m‐CzOXD) ( 3 ) and 2‐(2‐(9H‐carbazol‐9‐yl)phenyl)‐5‐(4‐(9H‐carbazol‐9‐yl)phenyl)‐1,3,4‐oxadiazole (op‐CzOXD) ( 4 ) are synthesized through simple aromatic nucleophilic substitution reactions. The incorporation of the oxadiazole moiety greatly improves their morphological stability, with T_d and T_g in the range of 428–464 °C and 97–133 °C, respectively. The ortho and meta positions of the 2,5‐diphenyl‐1,3,4‐oxadiazole linked hybrids ( 1 and 3 ) show less intramolecular charge transfer and a higher triplet energy compared to the para‐position linked analogue ( 2 ). The four compounds exhibit similar LUMO levels (2.55–2.59 eV) to other oxadiazole derivatives, whereas the HOMO levels vary in a range from 5.55 eV to 5.69 eV, depending on the linkage modes. DFT‐calculation results indicate that 1 , 3 , and 4 have almost complete separation of their HOMO and LUMO levels at the hole‐ and electron‐transporting moieties, while 2 exhibits only partial separation of the HOMO and LUMO levels possibly due to intramolecular charge transfer. Phosphorescent organic light‐emitting devices fabricated using 1 – 4 as hosts and a green emitter, Ir(ppy)₃ or (ppy)₂Ir(acac), as the guest exhibit good to excellent performance. Devices hosted by o‐CzOXD ( 1 ) achieve maximum current efficiencies (η_c) as high as 77.9 cd A^?1 for Ir(ppy)₃ and 64.2 cd A^?1 for (ppy)₂Ir(acac). The excellent device performance may be attributed to the well‐matched energy levels between the host and hole‐transport layers, the high triplet energy of the host and the complete spatial separation of HOMO and LUMO energy levels.     

An Alternative Approach to Constructing Solution Processable Multifunctional Materials: Their Structure,Properties, and Application in High‐Performance Organic Light‐Emitting Diodes

A new series of full hydrocarbons, namely 4,4′‐(9,9′‐(1,3‐phenylene)bis(9H‐fluorene‐9,9‐diyl))bis(N,N‐diphenylaniline) (DTPAFB), N,N′‐(4,4′‐(9,9′‐(1,3‐phenylene)bis(9H‐fluorene‐9,9‐diyl))bis(4,1‐phenylene))bis(N‐phenylnaphthalen‐1‐amine) (DNPAFB), 1,3‐bis(9‐(4‐(9H‐carbazol‐9‐yl)phenyl)‐9H‐fluoren‐9‐yl)benzene, and 1,3‐bis(9‐(4‐(3,6‐di‐tert‐butyl‐9H‐carbazol‐9‐yl)phenyl)‐9H‐fluoren‐9‐yl)benzene, featuring a highly twisted tetrahedral conformation, are designed and synthesized. Organic light‐emitting diodes (OLEDs) comprising DNPAFB and DTPAFB as hole transporting layers and tris(quinolin‐8‐yloxy)aluminum as an emitter are made either by vacuum deposition or by solution processing, and show much higher maximum efficiencies than the commonly used N,N′‐di(naphthalen‐1‐yl)‐N,N′‐diphenylbiphenyl‐4,4′‐diamine device (3.6 cd A^?1) of 7.0 cd A^?1 and 6.9 cd A^?1, respectively. In addition, the solution processed blue phosphorescent OLEDs employing the synthesized materials as hosts and iridium (III) bis[(4,6‐di‐fluorophenyl)‐pyridinato‐N, C²] picolinate (FIrpic) phosphor as an emitter present exciting results. For example, the DTPAFB device exhibits a brightness of 47 902 cd m^?2, a maximum luminescent efficiency of 24.3 cd A^?1, and a power efficiency of 13.0 lm W^?1. These results show that the devices are among the best solution processable blue phosphorescent OLEDs based on small molecules. Moreover, a new approach to constructing solution processable small molecules is proposed based on rigid and bulky fluorene and carbazole moieties combined in a highly twisted configuration, resulting in excellent solubility as well as chemical miscibility, without the need to introduce any solubilizing group such as an alkyl or alkoxy chain.     

Structure–Property Relationship of Pyridine‐Containing Triphenyl Benzene Electron‐Transport Materials for Highly Efficient Blue Phosphorescent OLEDs

Three triphenyl benzene derivatives of 1,3,5‐tri(m‐pyrid‐2‐yl‐phenyl)benzene (Tm2PyPB), 1,3,5‐tri(m‐pyrid‐3‐yl‐phenyl)benzene (Tm3PyPB) and 1,3,5‐tri(m‐pyrid‐4‐yl‐phenyl)benzene (Tm4PyPB), containing pyridine rings at the periphery, are developed as electron‐transport and hole/exciton‐blocking materials for iridium(III) bis(4,6‐(di‐fluorophenyl)pyridinato‐N,C^2′)picolinate (FIrpic)‐based blue phosphorescent organic light‐emitting devices. Their highest occupied molecular orbital and lowest unoccupied molecular orbital (LUMO) energy levels decrease as the nitrogen atom of the pyridine ring moves from position 2 to 3 and 4; this is supported by both experimental results and density functional theory calculations, and gives improved electron‐injection and hole‐blocking properties. They exhibit a high electron mobility of 10^?4–10^?3 cm² V^?1 s^?1 and a high triplet energy level of 2.75 eV. Confinement of FIrpic triplet excitons is strongly dependent on the nitrogen atom position of the pyridine ring. The second exponential decay component in the transient photoluminescence decays of Firpic‐doped films also decreases when the position of the nitrogen atom in the pyridine ring changes. Reduced driving voltages are obtained when the nitrogen atom position changes because of improved electron injection as a result of the reduced LUMO level, but a better carrier balance is achieved for the Tm3PyPB‐based device. An external quantum efficiency (EQE) over 93% of maximum EQE was achieved for the Tm4PyPB‐based device at an illumination‐relevant luminance of 1000 cd m^?2, indicating reduced efficiency roll‐off due to better confinement of FIrpic triplet excitons by Tm4PyPB in contrast to Tm2PyPB and Tm3PyPB.     

White Organic Light‐Emitting Diodes with Evenly Separated Red,Green, and Blue Colors for Efficiency/Color‐Rendition Trade‐Off Optimization

A novel yellowish‐green triplet emitter, bis(5‐(trifluoromethyl)‐2‐p‐tolylpyridine) (acetylacetonate)iridium(III) (1), was conveniently synthesized and used in the fabrication of both monochromatic and white organic light‐emitting diodes (WOLEDs). At the optimal doping concentration, monochromatic devices based on 1 exhibit a high efficiency of 63 cd A^?1 (16.3% and 36.6 lm W^?1) at a luminance of 100 cd m^?2. By combining 1 with a phosphorescent sky‐blue emitter, bis(3,5‐difluoro‐2‐(2‐pyridyl)phenyl)‐(2‐carboxypyridyl)iridium(III) (FIrPic), and a red emitter, bis(2‐benzo[b]thiophen‐2‐yl‐pyridine)(acetylacetonate)iridium(III) (Ir(btp)₂(acac)), the resulting electrophosphorescent WOLEDs show three evenly separated main peaks and give a high efficiency of 34.2 cd A^?1 (13.2% and 18.5 lm W^?1) at a luminance of 100 cd m^?2. When 1 is mixed with a deep‐blue fluorescent emitter, 4,4′‐bis(9‐ethyl‐3‐carbazovinylene)‐1,1′‐biphenyl (BCzVBi), and Ir(btp)₂(acac), the resulting hybrid WOLEDs demonstrate a high color‐rendering index of 91.2 and CIE coordinates of (0.32, 0.34). The efficient and highly color‐pure WOLEDs based on 1 with evenly separated red, green, blue peaks and a high color‐rendering index outperform those of the state‐of‐the‐art emitter, fac‐tris(2‐phenylpyridine)iridium(III) (Ir(ppy)₃), and are ideal candidates for display and lighting applications.     

“Trade‐Off” Hidden in Condensed State Solvation: Multiradiative Channels Design for Highly Efficient Solution‐Processed Purely Organic Electroluminescence at High Brightness

Actualizing highly efficient solution‐processed thermally activated delayed fluorescent (TADF) organic light‐emitting diodes (OLEDs) at high brightness becomes significant to the popularization of purely organic electroluminescence. Herein, a highly soluble emitter benzene‐1,3,5‐triyltris((4‐(9,9‐dimethylacridin‐10(9H)‐yl)phenyl)methanone was developed, yielding high delayed fluorescence rate (k_TADF > 10⁵ s^?1) ascribed to the multitransition channels and tiny singlet–triplet splitting energy (ΔE_ST ≈ 32.7 meV). The triplet locally excited state is 0.38 eV above the lowest triplet charge‐transfer state, assuring a solely thermal equilibrium route for reverse intersystem crossing. Condensed state solvation effect unveils a hidden “trade‐off”: the reverse upconversion and triplet concentration quenching processes can be promoted but with a reduced radiative rate from the increased dopant concentration and the more polarized surroundings. Striking a delicate balance, corresponding vacuum‐evaporated and solution‐processed TADF‐OLEDs realized maximum external quantum efficiencies (EQEs) of ≈26% and ≈22% with extremely suppressed efficiency roll‐off. Notably, the wet‐processed one achieves to date the highest EQEs of 20.7%, 18.5%, 17.1%, and 13.6%, among its counterparts at the luminance of 1000, 3000, 5000, and 10 000 cd m^?2, respectively.     

Novel Heteroleptic CuI Complexes with Tunable Emission Color for Efficient Phosphorescent Light‐Emitting Diodes

A series of orange‐red to red phosphorescent heteroleptic Cu^I complexes (the first ligand: 2,2′‐biquinoline (bq), 4,4′‐diphenyl‐2,2′‐biquinoline (dpbq) or 3,3′‐methylen‐4,4′‐diphenyl‐2,2′‐biquinoline (mdpbq); the second ligand: triphenylphosphine or bis[2‐(diphenylphosphino)phenyl]ether (DPEphos)) have been synthesized and fully characterized. With highly rigid bulky biquinoline‐type ligands, complexes [Cu(mdpbq)(PPh₃)₂](BF₄) and [Cu(mdpbq)(DPEphos)](BF₄) emit efficiently in 20 wt % PMMA films with photoluminescence quantum yield of 0.56 and 0.43 and emission maximum of 606 nm and 617 nm, respectively. By doping these complexes in poly(vinyl carbazole) (PVK) or N‐(4‐(carbazol‐9‐yl)phenyl)‐3,6‐bis(carbazol‐9‐yl) carbazole (TCCz), phosphorescent organic light‐emitting diodes (OLEDs) were fabricated with various device structures. The complex [Cu(mdpbq)(DPEphos)](BF₄) exhibits the best device performance. With the device structure of ITO/PEDOT/TCCz:[Cu(mdpbq)(DPEphos)](BF₄) (15 wt %)/TPBI/LiF/Al (III), a current efficiency up to 6.4 cd A^–1 with the Commission Internationale de L'Eclairage (CIE) coordinates of (0.61, 0.39) has been realized. To our best knowledge, this is the first report of efficient mononuclear Cu^I complexes with red emission.     

New Solution‐Processable Electron Transport Materials for Highly Efficient Blue Phosphorescent OLEDs

Several new solution‐processable organic semiconductors based on dendritic oligoquinolines were synthesized and were used as electron‐transport and hole‐blocking materials to realize highly efficient blue phosphorescent organic light‐emitting diodes (PhOLEDs). Various substitutions on the quinoline rings while keeping the central meta‐linked tris(quinolin‐2‐yl)benzene gave electron transport materials that combined wide energy gap (>3.3 eV), moderate electron affinity (2.55‐2.8 eV), and deep HOMO energy level (<‐6.08 eV) with electron mobility as high as 3.3 × 10^?3 cm² V^?1 s^?1. Polymer‐based PhOLEDs with iridium (III) bis(4,6‐(di‐fluorophenyl)pyridinato‐N,C^2′)picolinate (FIrpic) blue triplet emitter and solution‐processed oligoquinolines as the electron‐transport layers (ETLs) gave luminous efficiency of 30.5 cd A^?1 at a brightness of 4130 cd m^?2 with an external quantum efficiency (EQE) of 16.0%. Blue PhOLEDs incorporating solution‐deposited ETLs were over two‐fold more efficient than those containing vacuum‐deposited ETLs. Atomic force microscopy imaging shows that the solution‐deposited oligoquinoline ETLs formed vertically oriented nanopillars and rough surfaces that enable good ETL/cathode contacts, eliminating the need for cathode interfacial materials (LiF, CsF). These solution‐processed blue PhOLEDs have the highest performance observed to date in polymer‐based blue PhOLEDs.     

Efficient Blue Phosphorescent OLEDs with Improved Stability and Color Purity through Judicious Triplet Exciton Management

Highly efficient and stable blue phosphorescent organic light‐emitting diodes are achieved by employing a step‐wise graded doping of platinum(II) 9‐(pyridin‐2‐yl)‐2‐(9‐(pyridin‐2‐yl)‐9H‐carbazol‐2‐yloxy)‐9H‐carbazole (PtNON) in a device setting. A device employing PtNON demonstrates a high peak external quantum efficiency (EQE) of 17.4% with an estimated LT₇₀ lifetime of over 1330 h at a brightness of 1000 cd m^?2. PtNON is then investigated as a “triplet sensitizer” in an alternating donor–acceptor doped emissive layer to further improve the device emission color purity by carefully managing an efficient Förster resonant energy transfer from PtNON to 2,5,8,11‐tetra‐tert‐butylperylene as a selected acceptor material. Thus, such OLED devices demonstrate an EQE of 16.9% with color coordinates of (0.16, 0.25) and an estimated luminance (LT₇₀) lifetime of 628 h at a high brightness of 1000 cd m^?2.     

A Bipolar Host Material Containing Triphenylamine and Diphenylphosphoryl‐Substituted Fluorene Units for Highly Efficient Blue Electrophosphorescence

Highly efficient blue electrophosphorescent organic light‐emitting diodes incorporating a bipolar host, 2,7‐bis(diphenylphosphoryl)‐9‐[4‐(N,N‐diphenylamino)phenyl]‐9‐phenylfluorene (POAPF), doped with a conventional blue triplet emitter, iridium(III) bis[(4,6‐difluoro‐phenyl)pyridinato‐N,C^2´]picolinate (FIrpic) are fabricated. The molecular architecture of POAPF features an electron‐donating (p‐type) triphenylamine group and an electron‐accepting (n‐type) 2,7‐bis(diphenyl‐phosphoryl)fluorene segment linked through the sp³‐hybridized C9 position of the fluorene unit. The lack of conjugation between these p‐ and n‐type groups endows POAPF with a triplet energy gap (E_T) of 2.75 eV, which is sufficiently high to confine the triplet excitons on the blue‐emitting guest. In addition, the built‐in bipolar functionality facilitates both electron and hole injection. As a result, a POAPF‐based device doped with 7 wt% FIrpic exhibits a very low turn‐on voltage (2.5 V) and high electroluminescence efficiencies (20.6% and 36.7 lm W^?1). Even at the practical brightnesses of 100 and 1000 cd m^?2, the efficiencies remain high (20.2%/33.8 lm W^?1 and 18.8%/24.3 lm W^?1, respectively), making POAPF a promising material for use in low‐power‐consumption devices for next‐generation flat‐panel displays and light sources.     

Water‐Soluble Lacunary Polyoxometalates with Excellent Electron Mobilities and Hole Blocking Capabilities for High Efficiency Fluorescent and Phosphorescent Organic Light Emitting Diodes

High performance solution‐processed fluorescent and phosphorescent organic light emitting diodes (OLEDs) are achieved by water solution processing of lacunary polyoxometalates used as novel electron injection/transport materials with excellent electron mobilities and hole blocking capabilities. Green fluorescent OLEDs using poly[(9,9‐dioctylfluorenyl‐2,7‐diyl)‐co‐(1,4‐benzo‐{2,1′,3}‐thiadiazole)] (F8BT) as the emissive layer and our polyoxometalates as electron transport/hole blocking layers give a luminous efficiency up to 6.7 lm W^?1 and a current efficiency up to 14.0 cd A^?1 which remained nearly stable for about 500 h of operation. In addition, blue phosphorescent OLEDs (PHOLEDs) using poly(9‐vinylcarbazole) (PVK):1,3‐bis[2‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazo‐5‐yl]benzene (OXD‐7) as a host and 10.0 wt% FIrpic as the blue dopant in the emissive layer and a polyoxometalate as electron transport material give 12.5 lm W^?1 and 30.0 cd A^?1 power and luminous efficiency, respectively, which are among the best performance values observed to date for all‐solution processed blue PHOLEDs. The lacunary polyoxometalates exhibit unique properties such as low electron affinity and high ionization energy (of about 3.0 and 7.5 eV, respectively) which render them as efficient electron injection/hole blocking layers and, most importantly, exceptionally high electron mobility of up to 10^?2 cm² V^?1 s^?1.     

Triphenyl phosphine oxide-bridged bipolar host materials for green and red phosphorescent organic light-emitting diodes

Two wide band gap functional compounds of phenylbis(4-(spiro [fluorene-9,9'-xanthen]-2-yl)phenyl)phosphine oxide (2SFOPO) and (4-(9-ethyl-9H- carbazol-3-yl)phenyl)(phenyl)(4-(spiro[fluorene-9,9′-xanthen]-2-yl)phenyl)phosphine oxide (SFOPO-CZ) were designed, synthesized and characterized. Their thermal, photophysical, electrochemical properties and device applications were further investigated to correlate the chemical structure of bipolar host materials with the electroluminescent performance for phosphorescent organic light-emitting diodes (PhOLEDs). Both of them show high thermal stability with glass transition temperatures in a range of 105–122 °C and thermal decomposition temperatures at 5% weight loss in a range of 406–494 °C. The optical band gaps of compound 2SFOPO and SFOPO-CZ in CH₂Cl₂ solution are 3.46 and 3.35 eV, and their triplet energy levels are 2.51 eV and 2.52 eV, respectively. The high photoluminescent quantum efficiency of emissive layer of doped green device up to 50% is obtained. Employing the developed materials, efficient green and red PhOLED in simple device configurations have been demonstrated. As a result, the green PhOLEDs of compound SFOPO-CZ doped with tris(2-phenylpyridine) iridium shows electroluminescent performance with a maximum current efficiency (CE_max) of 52.83 cd A⁻¹, maximum luminance of 34,604 cd/m², maximum power efficiency (PE_max) of 39.50 lm W⁻¹ and maximum external quantum efficiency (EQE_max) of 14.1%. The red PhOLED hosted by compound 2SFOPO with bis(2-phenylpyridine)(acetylacetonato) iridium(III) as the guest exhibits a CE_max of 20.99 cd A⁻¹, maximum luminance of 33,032 cd/m², PE_max of 20.72 lm W⁻¹ and EQE_max of 14.0%. Compound SFOPO-CZ exhibits better green device performance, while compound 2SFOPO shows better red device performance in PhOLEDs.     

Dependence of Light‐Emitting Characteristics of Blue Phosphorescent Organic Light‐Emitting Diodes on Electron Injection and Transport Materials

We investigate the light‐emitting performances of blue phosphorescent organic light‐emitting diodes (PHOLEDs) with three different electron injection and transport materials, that is, bathocuproine(2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline) (Bphen), 1,3,5‐tri(m‐pyrid‐3‐yl‐phenyl)benzene (Tm3PyPB), and 2,6‐bis(3‐(carbazol‐9‐yl)phenyl)pyridine (26DCzPPy), which are partially doped with cesium metal. We find that the device characteristics are very dependent on the nature of the introduced electron injection layer (EIL) and electron transporting layer (ETL). When the appropriate EIL and ETL are combined, the peak external quantum efficiency and peak power efficiency improve up to 20.7% and 45.6 lm/W, respectively. Moreover, this blue PHOLED even maintains high external quantum efficiency of 19.6% and 16.9% at a luminance of 1,000 cd/m² and 10,000 cd/m², respectively.     

Indenocarbazole based bipolar host materials for highly efficient yellow phosphorescent organic light emitting diodes

We report bipolar host materials with robust indenocarbazole and biphenyl moiety as hole-electron-transporting unit for phosphorescent yellow organic light-emitting diodes (OLEDs). New host materials demonstrated an excellent morphological stability with high glass transition temperature of 207 °C. Simultaneously, it also revealed appropriate triplet energy of about 2.6 eV for ideal triplet energy transfer to yellow phosphorescent dopant. A phosphorescent yellow OLED with new host ICBP1 (and ICBP2) and conventional yellow dopant iridium(III)bis(4-(4-t-butylphenyl)thieno[3,2-c]pyridinato-N,C2′)acetylacetonate (Ir(tptpy)₂acac) shows a low driving voltage of 3.4 (and 3.6 V) at 1000 cd/m², and maximum external quantum efficiency as high as 26.4%. Such efficient performance of phosphorescent yellow OLEDs is attributed to a good charge balance and high electron transport properties of host materials.     

High‐Performance Red,Green, and Blue Electroluminescent Devices Based on Blue Emitters with Small Singlet–Triplet Splitting and Ambipolar Transport Property

Two coordination complex emitters as well as host materials Be(PPI)₂ and Zn(PPI)₂ (PPI = 2‐(1‐phenyl‐1H‐phenanthro[9,10‐d]imidazol‐2‐yl)phenol) are designed, synthesized, and characterized. The incorporation of the metal atom leads to a twisted conformation and rigid molecular structure, which improve the thermal stability of Be(PPI)₂ and Zn(PPI)₂ with high T_d and T_g at around 475 and 217 °C, respectively. The introduction of the electron‐donating phenol group results in the emission color shifting to the deep‐blue region and the emission maximum appears at around 429 nm. This molecular design strategy ensures that the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) HOMO and LUMO of Be(PPI)₂ and Zn(PPI)₂ localize on the different moieties of the molecules. Therefore, the two complexes have an ambipolar transport property and a small singlet–triplet splitting of 0.35 eV for Be(PPI)₂ and 0.21 eV for Zn(PPI)₂. An undoped deep‐blue fluorescent organic light‐emitting device (OLED) that uses Be(PPI)₂ as emitter exhibits a maximum power efficiency of 2.5 lm W^?1 with the CIE coordinates of (0.15, 0.09), which are very close to the National Television Standards Committee (NTSC) blue standard (CIE: 0.14, 0.08). Green and red phosphorescent OLEDs (PhOLEDs) that use Be(PPI)₂ and Zn(PPI)₂ as host materials show high performance. Highest power efficiencies of 67.5 lm W^?1 for green PhOLEDs and 21.7 lm W^?1 for red PhOLEDs are achieved. In addition, the Be(PPI)₂‐based devices show low‐efficiency roll‐off behavior, which is attributed to the more balanced carrier‐transport property of Be(PPI)₂.     

Harvesting Excitons Via Two Parallel Channels for Efficient White Organic LEDs with Nearly 100% Internal Quantum Efficiency: Fabrication and Emission‐Mechanism Analysis

By incorporating two phosphorescent dyes, namely, iridium(III)[bis(4,6‐difluorophenyl)‐pyridinato‐N,C²′]picolinate (FIrpic) for blue emission and bis(2‐(9,9‐diethyl‐9H‐fluoren‐2‐yl)‐1‐phenyl‐1H‐benzoimidazol‐N,C³)iridium(acetylacetonate) ((fbi)₂Ir(acac)) for orange emission, into a single‐energy well‐like emissive layer, an extremely high‐efficiency white organic light‐emitting diode (WOLED) with excellent color stability is demonstrated. This device can achieve a peak forward‐viewing power efficiency of 42.5 lm W^?1, corresponding to an external quantum efficiency (EQE) of 19.3% and a current efficiency of 52.8 cd A^?1. Systematic studies of the dopants, host and dopant‐doped host films in terms of photophysical properties (including absorption, photoluminescence, and excitation spectra), transient photoluminescence, current density–voltage characteristics, and temperature‐dependent electroluminescence spectra are subsequently performed, from which it is concluded that the emission natures of FIrpic and (fbi)₂Ir(acac) are, respectively, host–guest energy transfer and a direct exciton formation process. These two parallel pathways serve to channel the overall excitons to both dopants, greatly reducing unfavorable energy losses. It is noteworthy that the introduction of the multifunctional orange dopant (fbi)₂Ir(acac) (serving as either hole‐trapping site or electron‐transporting channel) is essential to this concept as it can make an improved charge balance and broaden the recombination zone. Based on this unique working model, detailed studies of the slight color‐shift in this WOLED are performed. It is quantitatively proven that the competition between hole trapping on orange‐dopant sites and undisturbed hole transport across the emissive layer is the actual reason. Furthermore, a calculation of the fraction of trapped holes on (fbi)₂Ir(acac) sites with voltage shows that the hole‐trapping effect of the orange dopant is decreased with increasing drive voltage, leading to a reduction of orange emission.     

Spin‐Coated Highly Efficient Phosphorescent Organic Light‐Emitting Diodes Based on Bipolar Triphenylamine‐Benzimidazole Derivatives

A new series of star‐shaped bipolar host molecules, tris(4′‐(1‐phenyl‐1H‐benzimidazol‐2‐yl)biphen‐yl‐4‐yl) amine (TIBN), tris(2′‐methyl‐4′‐(1‐phenyl‐1H‐benzimida zol‐2‐yl)biphenyl‐4‐yl)amine (Me‐TIBN), and tris(2,2′‐dimethyl‐4′‐(1‐phenyl‐1H‐benzimidazol‐2‐yl)biphenyl‐4‐yl)amine (DM‐TIBN), that contain hole‐transporting triphenylamine and electron‐transporting benzimidazole moieties are designed based on calculations using density functional theory and successfully prepared. The theoretical calculation of energy levels of TIBN derivatives affords helpful ideas to design molecules with a favorable localization of highest occupied/lowest unoccupied molecular orbital (HOMO/LUMO) levels and a predefined enhancement of the triplet energy gap. The TIBN derivatives are employed as hosts to fabricate phosphorescent organic light‐emitting diodes (OLEDs) by the two methods of spin‐coating and vacuum deposition. Notably, the spin‐coated Me‐TIBN and DM‐TIBN devices exhibit a much better performance than the vacuum‐deposited ones, in which the spin‐coated DM‐TIBN device (47 500 cd m^?2, 27.3 cd A^?1, 7.3 lm W^?1) is outstanding with respect to other seminal work for solution‐processed OLEDs. More importantly, the new concept of localizing HOMO and LUMO levels for bipolar molecules is illustrated, and a facile strategy to tailor the energy levels by breaking the conjugation of hole‐ and electron‐transporting moieties is demonstrated.     

Multifunctional Triphenylamine/Oxadiazole Hybrid as Host and Exciton‐Blocking Material: High Efficiency Green Phosphorescent OLEDs Using Easily Available and Common Materials

A new triphenylamine/oxadiazole hybrid, namely m‐TPA‐o‐OXD, formed by connecting the meta‐position of a phenyl ring in triphenylamine with the ortho‐position of 2,5‐biphenyl‐1,3,4‐oxadiazole, is designed and synthesized. The new bipolar compound is applicable in the phosphorescent organic light‐emitting diodes (PHOLEDs) as both host and exciton‐blocking material. By using the new material and the optimization of the device structures, very high efficiency green and yellow electrophosphorescence are achieved. For example, by introducing 1,3,5‐tris(N‐phenylbenzimidazol‐2‐yl)benzene (TPBI) to replace 2, 9‐dimethyl‐4,7‐diphenyl‐1, 10‐phenanthroline (BCP)/tris(8‐hydroxyquinoline)aluminium (Alq₃) as hole blocking/electron transporting layer, followed by tuning the thicknesses of hole‐transport 1, 4‐bis[(1‐naphthylphenyl)amino]biphenyl (NPB) layer to manipulate the charge balance, a maximum external quantum efficiency (η_EQE,max) of 23.0% and a maximum power efficiency (η_p,max) of 94.3 lm W⁻¹ are attained for (ppy)₂Ir(acac) based green electrophosphorescence. Subsequently, by inserting a thin layer of m‐TPA‐o‐OXD as self triplet exciton block layer between hole‐transport and emissive layer to confine triplet excitons, a η_EQE,max of 23.7% and η_p,max of 105 lm W⁻¹ are achieved. This is the highest efficiency ever reported for (ppy)₂Ir(acac) based green PHOLEDs. Furthermore, the new host m‐TPA‐o‐OXD is also applicable for other phosphorescent emitters, such as green‐emissive Ir(ppy)₃ and yellow‐emissive (fbi)₂Ir(acac). A yellow electrophosphorescent device with η_EQE,max of 20.6%, η_c,max of 62.1 cd A⁻¹, and η_p,max of 61.7 lm W⁻¹, is fabricated. To the author’s knowledge, this is also the highest efficiency ever reported for yellow PHOLEDs.