自适应CA-CFAR的心电信号R波检测技术

针对心电信号R波的突变特性,利用雷达信号的检测方法,本文提出一种自适应单元平均恒虚警率(cell averaging-constant false alarm rate, CA-CFAR)的R波检测方法。首先利用滤波器组对心电信号进行预处理;然后将预处理后的信号利用自适应CA-CFAR检测判决;最后由心电信号R波的间隔特性做一个不应期剔除规则的处理,得到R波的定位。对美国麻省理工学院提供的MIT-BIH数据库中心电图(Electrocardiograph, ECG)信号仿真,实验证明,自适应参考单元的CA-CFAR对MIT-BIH的ECG信号R波检测的精准率为99.842%,检测误差为0.354%。实测数据表明了算法的有效性和适用性。      

可穿戴心电信号监测中运动伪影消除技术研究

心电图(ECG)是心脏疾病诊断最有效的工具。噪声的去除和Q波、R波、S波的提取是心电信号检测中的两大主题。本文使用Savitzky-Golay滤波器对人体在弯腰、走路、坐下-站起等运动状态下采集的心电信号进行分析,去除信号中的基线漂移和运动伪影,并对滤波后信号的Q波、R波和S波进行检测。通过将本文提出的滤波方式与卡尔曼滤波、小波分解就时间复杂度和功率谱密度两个参数进行对比分析,评估Savitzky-Golay滤波器在心电信号中运动伪影去除的优势。实验结果表明,Savitzky-Golay滤波器能更加有效地适应心电信号的变化,有效地去除心电信号中的噪声,并且最大限度保持心电波形的形状和波峰。      

基于高阶统计量的心电信号R波检测

心电信号的检测对于临床心脏疾病的检验和确诊有很重要的作用,所以目前有关心电信号榆测方法的研究很多.本文针对心电信号R波的检测,采用了一种基于高阶统计量的检测方法.使用MATLAB编程软件实现了心电信号R波检测,采用非参数直接法心电信号R波进行双谱估计.并将实验运行结果作以比较.实验结果表明高阶统计量是一种十分有效的信号检测和系统分析方法.     

基于改进差分阈值算法的心电检测技术研究

针对差分阈值算法中固定阈值的局限性,文中提出了一种基于自适应波峰阈值和R波间隔阈值的算法。该算法结合心电信号特点自动选择波峰阈值,并选择R波间隔阈值,提高了算法的自适应性和准确率。文中以MIT-BIH心律失常数据库中的心电信号作为实验样本,采用带通滤波与小波阈值滤波相结合的方法完成心电信号去噪,采用改进差分自适应阈值算法对心电信号进行波形检测。实验结果表明,该算法能够将心电信号R波的检测准确率提升到99.57%,有效减少了误检、漏检问题的发生,并可准确完成心率、心率变异性、身体疲劳度、精神疲劳度计算和常见心律失常分类。     

一种基于Hilbert变换的R波检测算法

基于希尔波特(Hilbert)变换性质和自适应阈值检测原理,本文提出一种新的心电信号R检测算法。该方法经MIT-BIH心电数据库数据验证,可有效降低基线漂移和高频噪声的干扰,克服高大P波和T波的影响,准确检测率在99．84%以上,算法简单,实时性好。     

基于高阶统计量的心电信号R波检测

心电信号的检测对于临床心脏疾病的检验和确诊有很重要的作用,所以目前有关心电信号检测方法的研究很多。本文针对心电信号R波的检测,采用了一种基于高阶统计量的检测方法。使用MATLAB编程软件实现了心电信号R波检测,采用非参数直接法心电信号R波进行双谱估计,并将实验运行结果作以比较。实验结果表明高阶统计量是一种十分有效的信号检测和系统分析方法。     

边缘学科分支最新动向

TN一051 2003011654心电图的数组化及其在Q RS波检测中的应用/漆进,莫智文(四川师范大学)11生物医学工程学杂志一2002,19(2)一225一228提出用折线拟合心电图,将心电图数组化,通过分析数组,来体现QRS彼与非Q RS波部分的特征,结合有噪声部分和没有噪部分来分析有噪声部分.该方法经M IT/BIH标准心电数据库检测验证,QRS波正确检测率高达99.9%该方法在体现心电图的整体特征方面具有创造性和可行性,能达到准确识别复杂波形的目的.图4表2参4(木)伟,(2J王永红(重庆大学J“生物医学工程学杂志一2002,19(2).一229一231利用两种复杂性测度的方…     

基于生成对抗网络的动态心电信号QRS波检测

心电信号分析是预防心血管疾病的重要举措,QRS波的精确检测不仅是心电信号处理的关键步骤且对心率计算和异常情况分析具有重要作用.针对动态心电信号存在信号质量差或异常节奏波形导致常用QRS波检测方法精度较低的问题,本文提出了 一种基于生成对抗网络新型QRS波检测算法.该算法以Pix2Pix网络为基础,生成网络采用U-Net...     

基于稀疏分解和模糊理论的心电信号波形检测及识别

心电图是现代医学的一个重要诊断依据. 用计算机检测识别心电信号波形,能缓解越来越庞大的心电数据给医务人员带来的工作压力,减少因疲劳、疏忽以及主观偏差产生的误差.利用改进的Gabor字典和粒子群优化算法,对心电信号做稀疏分解,并根据所得系数及对应的原子特性,建立模糊规则检测QRS波群.再在QRS波群前后,通过稀疏分解找到最有可能对应着P波、T波的原子,然后用模糊系统完成P波、T波的检测识别.实验表明,算法QRS波群检测正确率高,P波、T波波形识别符合专家的主观判断,算法切实可行.     

基于小波和扩展卡尔曼的心电检测

文中将小波变换和扩展卡尔曼滤波器相结合,利用小波变换多尺度多分辨的特点,将心电信号进行分解。然后对心电信号在各尺度上进行扩展卡尔曼滤波。最后在扩展卡尔曼滤波的输出结果上进行QRS波形检测。文中方法经MIT-BIH心电数据库检验,QRS波Se（探测灵敏度）在99.40%以上,同时,QRS＋P（正探测率）在99.39%以上,提高了心电信号检测的正确率。     

Interfacial reaction and shear strength of SnAgCu-xNi/Ni solder joints during aging at 150 °C

The interfacial microstructure and shear strength of Sn3.8Ag0.7Cu-xNi (SAC-xNi, x = 0.5, 1, and 2) composite solders on Ni/Au finished Cu pads were investigated in detail after aging at 150 °C for up to 1000 h. The interfacial characteristics of composite solder joints were affected significantly by the weight percentages of added Ni micro-particles and aging time. After aging for 200 h, the solder joints of SAC, SAC-0.5Ni and -1Ni presented duplex intermetallic compound (IMC) layers regardless of the initial interfacial structure on as-reflowed joints, whose upper and lower IMC layers were comprised of (CuNi)₆Sn₅ and (NiCu)₃Sn₄, respectively. Only a single (NiCu)₃Sn₄ IMC layer was ever observed at the SAC-2Ni/Ni interface on whole aging process. Based on the compositional analysis, the amount of Ni within the IMC regions increased as the proportion of Ni addition increased. The IMC (NiCu)₃Sn₄ layer thickness on the interface of SAC and SAC-0.5Ni grew more slowly when compared to that of SAC-1Ni and -2Ni, while for the (CuNi)₆Sn₅ layer the reverse is true. Except the IMCs sizes are increased with increased aging time, the interfacial IMCs tended to transfer their morphologies to polyhedra. In all composite joints testing, the shear strengths were approximately equal to non-composite joints. The fracturing observed during shear testing of composite joints occurred in the bulk solder, indicating that the SAC-xNi/Ni solder joints had a desirable joint reliability.     

有机发光二极管中ADN掺杂ErQ的1.54μm电致发光

自行设计了基于8-羟基喹啉铒(ErQ)为发射层(EMLs)和二硝酰胺铵(ADN)为蓝光主体材料的近红外有机发光二级管.器件的基本结构为(p-Si/NPB/EML/Bphen/Bphen:Cs2CO3/Sm/Au),设计并比较了三套不同发射层结构(ErQ/ADN为双层结构器件,(ErQ/ADN)×3为多层结构器件,ErQ:ADN为掺杂结构器件)的器件.三组器件在一定的偏压下,均可发出1.54μm的光,对应三价铒离子4I13/2→4I15/2的跃迁.其中,ADN:ErQ(1∶1)掺杂结构的近红外电致发光强度是ADN/ErQ双层结构中的三倍.此外,不同掺杂浓度的ADN:ErQ复合膜做了以下表征:吸收谱、光致发光谱和荧光寿命谱.实验结果证实了在近红外电致发光过程中存在从ADN主体分子到ErQ发射分子的高效率的能量转移.     

BNBST无铅压电陶瓷的制备工艺研究

设计了（Bi0.55Na0.5）1-X（BaaSrb）xTiO3（BNBST[100x-100a／100b]）无铅压电陶瓷新体系。该体系压电陶瓷具有工艺特性及压电响应好，压电常数高的特点，且有实际应用前景的新型压电陶瓷材料体系。采用传统的陶瓷工艺制备了（Bi0.55Na0.5）1-X（BaaSrb）xTiO3无铅压电陶瓷，研究了制备工艺参数对其物化结构性能的影响。生料的热重-差热（TGA-DTA）分析表明，粉料合成过程中，先是SrTiO3、BaTiO3的形成，然后是（Bi0．5Na0．5）Tio，的形成，同时三者形成固溶体；密度测试表明，陶瓷的体积密度随烧结温度的升高而增大，可较易获得理论密度94％的陶瓷；X-射线能谱分析（EDAX）研究表明，陶瓷的Bi、Na的挥发随着烧结温度的升高而加剧。研究结果表明，要制备性能优良的无铅压电陶瓷，需要精确控制制备工艺。     

Emerging interconnects: a state-of-the-art review and emerging solutions

Aluminium was a primary material for interconnection in integrated circuits (ICs) since their inception. Later, copper was introduced as interconnect material which has better metallic conductivity and resistance to electromigration. As the aggressive technology scaling continues, the copper resistivity increased because of size effects, which causes increase in delay, power dissipation and electromigration. The need to reduce the resistor-capacitor??????? delay, dynamic power utilisation and the crosstalk commotion is as of now the fundamental main impetus behind the presentation of new materials. The purpose of this paper is to do a survey of interconnect material used in IC from introduction of ICs to till date. This paper studies and reviews new materials available for interconnect application which are optical interconnects, carbon nanotube (CNT), graphene nanoribbons (GNRs) and silicon nanowires which are alternatives to copper. While doing a survey of interconnect material, it is found that multiwalled CNTs, multilayer GNR and mixed CNT bundles are promising candidates and are ultimate choice that can strongly address the problems faced by copper but on integration basis copper would last for coming years.     

钠离子对poly(dT).poly(dA).poly(dT)三螺旋DNA分子呼吸模式的影响

利用分子结构的螺旋对称性,建立了一个包括钠离子的三链DNA分子poly(dT)*poly(dA)*poly(dT)的晶格动力学模型,计算了poly(dT)*poly(dA)*poly(dT)的氢键呼吸模式.结果发现钠离子的加入明显地淬灭了位于较低频率的几个最为强烈的Hoogensteen氢键呼吸模式,而对Watson-Crick氢键呼吸模式影响不明显,这说明钠离子能提高poly(dT)*poly(dA)*poly(dT)三螺旋结构的稳定性.该计算结果很好地解释了poly(dT)*poly(dA)*poly(dT)的热融化实验.     

聚对苯撑苯并双(口恶)唑发光及其器件制备

采用光谱技术,研究了聚对苯撑苯并双(口恶)唑(PBO)溶液的光敏发光特性,并用相对法估算出溶液发光效率在50%范围.结合光谱技术、半导体电学和电化学等研究手段,具体研究了以PBO为发光层的单层电致发光器件,研究结果显示,电致发光与薄膜的光致发光有具有相同的发光中心,峰值位于510 nm左右.同时发现,由于存制备过程中不同处理条件使得不同厚度薄膜残留的掺杂物质浓度不同,从而引起薄膜的导电性的不同.使得器件的阈值场强随PBO厚度的减小而逐渐增加.     

人小肠粘膜免疫酶的定位研究—光镜和电镜免疫组织化学染色法

本文对免疫酶组织化学的样品制备程序和染色方法做了详细的阐述。用直接法、间接法和ABC法,对人小肠免疫酶的定位,进行了光镜和电镜的观察,染色阳性反应显著,获得了满意的效果。并对染色技巧做了分析和探讨。     

Arsenic deposition as a precursor layer on silicon (211) and (311) surfaces

We investigate the properties of arsenic (As) covered Si(211) and Si(311) surfaces by analyzing data from x-ray photoelectron spectroscopy (XPS) and low-energy electron diffraction (LEED) images. We then create a model using total surface energy calculations. It was found that both Si(211) and Si(311) had 0.68±0.08 surface As coverage. Si(211) had 0.28±0.04 Te coverage and Si(311) had 0.24±0.04 Te coverage. The Si(211) surface replaces the terrace and trench Si atoms with As for a lower surface energy, while the Si edge atoms form dimers. The Si(311) surface replaces all terrace atoms and adsorbs an As dimer every other edge site. These configurations imply an improvement in the mean migration path from the bare silicon surface by allowing the impinging atoms for the next epitaxial layer, tellurium (Te), to bind at every other pair of edge atoms, and not the step terrace sites. This would ensure a nonpolar, B-face growth.     

Joint estimation of TOA and DOA in IR-UWB system using a successive propagator method

Impulse radio ultra-wideband (IR-UWB) ranging and positioning require accurate estimation of time-of-arrival (TOA) and direction-of-arrival (DOA). With receiver of two antennas, both of the TOA and DOA parameters can be estimated via two-dimensional (2D) propagator method (PM), in which the 2D spectral peak searching, however, renders much higher computational complexity. This paper proposes a successive PM algorithm for joint TOA and DOA estimation in IR-UWB system to avoid 2D spectral peak searching. The proposed algorithm firstly gets the initial TOA estimates in the two antennas from the propagation matrix, then utilises successively one-dimensional (1D) local searches to achieve the estimation of TOAs in the two antennas, and finally obtains the DOA estimates via the difference in the TOAs between the two antennas. The proposed algorithm, which only requires 1D local searches, can avoid the high computational cost in 2D-PM algorithm. Furthermore, the proposed algorithm can obtain automatically paired parameters and has better joint TOA and DOA estimation performance than conventional PM algorithm, estimation of signal parameters via rotational invariance techniques algorithm and matrix pencil algorithm. Meanwhile, it has very close parameter estimation to that of 2D-PM algorithm. We have also derived the mean square error of TOA and DOA estimation of the proposed algorithm and the Cramer-Rao bound of TOA and DOA estimation in this paper. The simulation results verify the usefulness of the proposed algorithm.     

系统级封装新型埋入式电源滤波结构的研究

在高密度小尺寸的系统级封装(SiP)中,对供电系统的完整性要求越来越高,多芯片共用一个电源网路所产生的电压抖动除了会影响到芯片的正常工作,还会通过供电网路干扰到临近电路和其他敏感电路,导致芯片误动作,以及信号完整性和其他电磁干扰问题.这种电压抖动所占频带相当宽,几百MHz到几个GHz的中频电源噪声普通方法很难去除.结合埋入式电容和电源分割方法的特点,提出一种新型高性能埋入式电源低通滤波结构直接替代电源/地平面.研究表明,在0.65～4GHz的频带内隔离深度可达-40～75 dB,电源阻抗均在0.25ohm以下,实现了宽频高隔离度的高性能滤波作用.分别用电磁场和广义传输线两种仿真器模拟,高频等效电路模型分析这种低通滤波器的工作原理以及结构对隔离性能的影响,并进行了实验验证.