Evaluation of the Oceansat‐1 Multi‐frequency Scanning Microwave Radiometer and its potential for soil moisture retrieval

The Multi‐frequency Scanning Microwave Radiometer (MSMR) aboard the Indian Space Research Organization—Oceansat‐1 platform measured land surface brightness temperature at a C‐band frequency and provided an opportunity for exploring large‐scale soil moisture retrieval during its two‐year period of operation. These data may provide a valuable extension to the Scanning Multichannel Microwave Radiometer (SMMR) and the Advanced Microwave Scanning Radiometer (AMSR) since they covered a portion of the time period between the two missions. This investigation was one of the first to utilize the MSMR data for a land application and, as a result, several data quality issues had to be addressed. These included geolocation accuracy, calibration (particularly over land), erroneous data, and the significance of anthropogenic radio‐frequency interference (RFI). Calibration of the low frequency channels was evaluated using inter‐comparisons between the Tropical Rainfall Measuring Mission/Microwave Imager (TRMM/TMI) and the MSMR brightness temperatures. Biases (TMI T _B>MSMR T _B) of 3.4 and 3.6 K were observed over land for the MSMR 10.65 GHz horizontal and vertical polarization channels, respectively. These results suggested that additional calibration of the MSMR data was required. Comparisons between the MSMR measured brightness temperature and ground measured volumetric soil moisture collected during the South Great Plain experiment (SGP99) indicated that the lower frequency and horizontal polarization observations had higher sensitivity to soil moisture. Using a previously developed soil emission model, multi‐temporal regional soil moisture distributions were retrieved for the continental United States. Comparisons between the MSMR based soil moisture and ground measured volumetric soil moisture indicated a standard error of estimate of 0.052 m³/m³.     

A combined passive/active microwave remote sensing approach for surface variable retrieval using Tropical Rainfall Measuring Mission observations

The backscattering and emission measured simultaneously by radar and radiometer show promise for the estimation of surface variables such as near-surface soil moisture and vegetation characteristics. In this paper, the 10.7 GHz Tropical Rainfall Measuring Mission (TRMM) microwave imager (TMI) channel and 13.8 GHz precipitation radar (PR) observations are simultaneously used for the estimation of the near-surface soil moisture and vegetation properties. The Fresnel model for soil and a simple model for vegetation are used to simulate the passive microwave emission at 10.7 GHz. To determine the PR backscatter signal from a land surface, a theoretical approach is used based on the Geometric Optics Model for simulating bare soil and a semi-empirical water-cloud model for vegetation. The model parameters required in specifying the nature of the soil and vegetation are calibrated on the basis of in situ soil moisture data combined with remotely sensed observations. The calibrated model is subsequently used to retrieve near-surface soil moisture and leaf area index for assumed values of surface roughness and temperature. Algorithm assessment using synthetic passive and active microwave data shows a nonlinearity effect in the system inversion, which results in a varying degree of error statistics in soil wetness and vegetation characteristics retrieval. The technique was applied on TRMM radar/radiometer observations from three consecutive years and evaluated against in situ near-surface (5 cm) soil moisture measurements from the Oklahoma Mesonet showing a consistent performance.     

Validation of a practical normalized soil moisture model with in situ measurements in humid and semi-arid regions

Soil moisture is an important parameter that influences the exchange of water and energy fluxes between the land surface and the atmosphere. Through the simulation by a Soil–Vegetation–Atmosphere Transfer model, Carlson proposed the universal spatial information-based method to determine soil moisture that is insensitive to the initial atmospheric and surface conditions, net radiation, and atmospheric correction. In this study, a practical normalized soil moisture model is established to describe the relationship among the normalized soil moisture (M), the normalized land surface temperature (T*), and the fractional vegetation cover. The dry and wet points are determined using the surface energy balance principle, which has a robust physical basis. This method is applied to retrieve soil moisture for the Soil Moisture-Atmosphere Coupling Experiment campaign in the Walnut Creek watershed, which has a humid climate, and at the Linzestation, which has a semi-arid climate. The validation data are obtained on days of year (DOYs) 182 and 189 in 2002 in the humid region and on DOYs 148 and 180 in 2008 for the semi-arid region; these data collection days are coincident with the overpass of the Landsat Thematic Mapper/Enhanced Thematic Mapper Plus. When the estimates are compared with the in situ measurements of soil water content, the root mean square error is approximately 0.10 m³ m^?3 with a bias of 0.05 m³ m^?3 for the humid region and 0.08 m³ m^?3 with a bias of 0.03 m³ m^?3 for the semi-arid region. These results demonstrate that the practical normalized soil moisture model is applicable in both humid and semi-arid regions.     

Global surface soil moisture from the Microwave Radiation Imager onboard the Fengyun-3B satellite

Soil moisture retrievals from China’s recently launched meteorological Fengyun-3B satellite are presented. An established retrieval algorithm – the Land Parameter Retrieval Model (LPRM) – was applied to observations of the Microwave Radiation Imager (MWRI) onboard this satellite. The newly developed soil moisture retrievals from this satellite mission may be incorporated in an existing global microwave-based soil moisture database. To reach consistency with an existing data set of multi-satellite soil moisture retrievals, an intercalibration step was applied to correct brightness temperatures for sensor differences between MWRI and the radiometer of the Tropical Rainfall Measuring Mission’s (TRMM’s) Microwave Imager (TMI), resulting from their individual calibration procedures. The newly derived soil moisture and vegetation optical depth product showed a high degree of consistency with parallel retrievals from both TMI and WindSat, the two satellites that are observing during the same time period and are already part of the LPRM database. High correlation (R > 0.60 at night-time) between the LPRM and official MWRI soil moisture products was shown over the validation networks experiencing semiarid climate conditions. The skills drop below 0.50 over forested regions, with the performance of the LPRM product slightly better than the official MWRI product. To demonstrate the promising use of the MWRI soil moisture in drought monitoring, a case study for a recent and unusually dry East Asian summer Monsoon was conducted. The MWRI soil moisture products are able to effectively delineate the regions that are experiencing a considerable drought, highly in agreement with spatial patterns of precipitation and temperature anomalies. The results in this study give confidence in the soil moisture retrievals from the MWRI onboard Fengyun-3B. The integration of the newly derived products into the existing database will allow a better understanding the diurnal, seasonal and interannual variations, and long-term (35 year) changes of soil moisture at the global scale, consequently enhancing hydrological, meteorological, and climate studies.     

Analysis of in-situ soil moisture data and validation of SMOS soil moisture products at selected agricultural sites over a tropical region

Calibration and validation activities on Soil Moisture and Ocean Salinity (SMOS)-derived soil moisture products have been conducted worldwide since the data became available, but this has not been the case over tropical regions. This study focuses on the setting up of a soil moisture data collection network over an agricultural site in a tropical region in Peninsular Malaysia and on the validation of SMOS soil moisture products. The in-situ data over a one-and-a-half-year period was analysed and the validation of the SMOS soil moisture products with this in-situ data was conducted. Bias and root mean square error (RMSE) were computed between the SMOS soil moisture products and the in-situ surface soil moisture collected at the satellite passing times (6 am and 6 pm local time). Due to the known limitations of SMOS soil moisture retrieval over vegetated areas with a vegetation water content higher than 5 kg m^?2, an overestimation of SMOS soil moisture products to in-situ data was noticed in this study. The bias ranged from 0.064 to 0.119 m³ m^?3 and the RMSE was from 0.090 to 0.158 m³ m^?3, when both ascending and descending mode data were measured. This RMSE was found to be similar to those of a number of studies conducted previously at different regions. However, a wet bias was found during the validation, while previous validation activities at other locations showed dry biases. The result of this study is useful to support the continuous development and improvement of the SMOS soil moisture retrieval model, aiming to produce soil moisture products with higher accuracy, especially in tropical regions.     

利用归一化微波差异指数和表面散射模型反演裸露地表土壤水分

在给定土壤质地和粗糙度状况条件下,用AIEM模型模拟AMSR-E的6.925GHz、10.65GHz和18.7GHz频率下不同含水量时土壤表面发射率和土壤温度的关系,分析表明V极化的发射率受土壤温度的影响很小,其变化主要由土壤水分的变化引起。通过计算不同频率组合V极化通道的归一化微波差异指数,并模拟与土壤水分的关系,然后利用这一关系对塔克拉玛干沙漠中部某地的土壤水分进行反演。结果发现用18.7GHz和10.65GHz V极化通道组合的反演值与AMSR-E Level 3土壤水分产品的吻合程度最好。在此基础上分别用3种常见的半经验表面散射模型:Q/H模型、Hp模型和Qp模型,通过计算上述通道组合的NMDI来反演研究区的土壤水分,结果表明利用3种半经验模型得到的反演值之间差异非常小,并且与用AIEM模型计算NMDI时的反演结果吻合较好。     

Soil moisture retrievals at L-band using a two-step inversion approach (COSMOS/NAFE'05 Experiment)

COSMOS (Campaign for validating the Operation of Soil Moisture and Ocean Salinity), and NAFE (National Airborne Field Experiment) were two airborne campaigns held in the Goulburn River catchment (Australia) at the end of 2005. These airborne measurements are being used as benchmark data sets for validating the SMOS (Soil Moisture and Ocean Salinity) ground segment processor over prairies and crops. This paper presents results of soil moisture inversions and brightness temperature simulations at different resolutions from dual-polarisation and multi-angular L-band (1.4 GHz) measurements obtained from two independent radiometers. The aim of the paper is to provide a method that could overcome the limitations of unknown surface roughness for soil moisture retrievals from L-band data. For that purpose, a two-step approach is proposed for areas with low to moderate vegetation. Firstly, a two-parameter inversion of surface roughness and optical depth is used to obtain a roughness correction dependent on land use only. This step is conducted over small areas with known soil moisture. Such roughness correction is then used in the second step, where soil moisture and optical depth are retrieved over larger areas including mixed pixels. This approach produces soil moisture retrievals with root mean square errors between 0.034 m³ m^− 3 and 0.054 m³ m^− 3 over crops, prairies, and mixtures of these two land uses at different resolutions.     

Identification of dry and wet soil conditions using TRMM/TMI brightness temperatures and potential for drought monitoring

In this study we present a methodology for monitoring drought conditions directly from microwave brightness temperature observations. Tropical Rainfall Measurement Mission (TRMM)/TRMM Microwave Imager (TMI) 10.7 GHz brightness temperatures were analysed along with TRMM merged rainfall products during June–August for 4 years to depict the spatial and temporal extent of dry and wet soil conditions. Comparison of brightness temperature anomalies with rainfall anomalies clearly shows the contrasting features of drought year 2002 and normal monsoon year 2001.     

Soil moisture estimates from TRMM Microwave Imager observations over the Southern United States

The lack of continuous soil moisture fields at large spatial scales, based on observations, has hampered hydrologists from understanding its role in weather and climate. The most readily available observations from which a surface wetness state could be derived is the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) observations at 10.65 GHz. This paper describes the first attempt to map daily soil moisture from space over an extended period of time. Methods to adjust for diurnal changes associated with this temporal variability and how to mosaic these orbits are presented. The algorithm for deriving soil moisture and temperature from TMI observations is based on a physical model of microwave emission from a layered soil-vegetation-atmosphere medium. An iterative, least-squares minimization method, which uses dual polarization observations at 10.65 GHz, is employed in the retrieval algorithm. Soil moisture estimates were compared with ground measurements over the U.S. Southern Great Plains (SGP) in Oklahoma and the Little River Watershed, Georgia. The soil moisture experiment in Oklahoma was conducted in July 1999 and Little River in June 2000. During both the experiments, the region was dry at the onset of the experiment, and experienced moderate rainfall during the course of the experiment. The regions experienced a quick dry-down before the end of the experiment. The estimated soil moisture compared well with the ground observations for these experiments (standard error of 2.5%). The TMI-estimated soil moisture during 6-22 July over Southern U.S. was analyzed and found to be consistent with the observed meteorological conditions.     

Surface soil moisture estimation over dense crop using Envisat ASAR and Landsat TM imagery: an approach

This study focuses on developing a new method of surface soil moisture estimation over wheat fields using Environmental Satellite Advanced Synthetic Aperture Radar (Envisat ASAR) and Landsat Thematic Mapper (TM) data. The Michigan Microwave Canopy Scattering (MIMICS) model was used to simulate wheat canopy backscattering coefficients from experiment plots at incidence angles of 23° (IS2) and 43.9° (IS7). Based on simulated data, the scattering characteristics of a wheat canopy were first investigated in order to derive an optimal configuration of polarization (HH) and incidence angle (IS2) for soil moisture estimation. Then a parametric model was developed to describe wheat canopy backscattering at the optimal configuration. In addition, direct backscattering and two-way transmissivity of wheat crowns were derived from the TM normalized difference vegetation index (NDVI); direct ground backscattering was derived from surface soil moisture and TM NDVI; and backscattering from double scattering was derived from total backscattering. A semi-empirical model for soil moisture estimation was derived from the parametric model. Coefficients in the semi-empirical model were obtained using a calibration approach based on measured soil moisture, ASAR, and TM data. A validation of the model was performed over the experimental area. In this study, the root mean square error (RMSE) for the estimated soil moisture was 0.041 m³ m^?3, and the correlation coefficient between the measured and estimated soil moisture was 0.84. The experimental results indicate that the semi-empirical model could improve soil moisture estimation compared to an empirical model.     

Effects of corn on C- and L-band radar backscatter: A correction method for soil moisture retrieval

This paper discusses the effects of vegetation on C- (4.75 GHz) and L- (1.6 GHz) band backscattering (σ^o) measured throughout a growth cycle at incidence angles of 15, 35 and 55°. The utilized σ^o data set was collected by a truck mounted scatterometer over a corn field and is supported by a comprehensive set of ground measurements, including soil moisture and vegetation biomass. Comparison of σ^o measurement against simulations by the Integral Equation Method (IEM) surface scattering model (Fung et al., 1992) shows that the σ^o measurements are dominated either by an attenuated soil return or by scattering from vegetation depending on the antenna configuration and growth stage. Further, the measured σ^o is found to be sensitive to soil moisture even at peak biomass and large incidence angles, which is attributed to scattering along the soil-vegetation pathway.For the simulation of C-band σ^o and the retrieval of soil moisture two methods have been applied, which are the semi-empirical water cloud model (Attema & Ulaby, 1978) and a novel method. This alternative method uses the empirical relationships between the vegetation water content (W) and the ratio of the bare soil and the measured σ^o to correct for vegetation. It is found that this alternative method is superior in reproducing the measured σ^o as well as retrieving soil moisture. The highest retrieval accuracies are obtained at a 35° incidence angle leading to RMSD's of 0.044 and 0.037 m³ m^− 3 for the HH and VV-polarization, respectively. In addition, the sensitivity of these soil moisture retrievals to W and surface roughness parameter uncertainties is investigated.     

Development of an ATI-NDVI method for estimation of soil moisture from MODIS data

Estimation of soil moisture is essential for research of climatology, hydrology, and ecology. The commonly used remotely sensed approach is LST-NDVI (land-surface temperature-normalized difference vegetation index). In this study, the apparent thermal inertia (ATI) is used instead of surface temperature to develop an ATI-NDVI space for estimation of soil moisture. Comparison with ground-based measurements shows a root mean square error (RMSE) of 0.0378 m³ m^?3 between retrieved and measured soil moistures. Validation with time series in situ data indicates the RMSE as 0.0162, 0.0285, 0.0368, and 0.0093 m³ m^?3 for forest, shrub, cropland, and grassland, respectively, which is comparable to or even better than the results of previous studies. The proposed method in this study is a remote-sensing approach without elaborate ancillary data except for the percentage of sand in the soil, and it is practical and convenient to be applied to regions with surfaces from bare soil to full vegetation and the entire range of surface moisture contents from wet to dry.     

Bare surface soil moisture retrieval from the synergistic use of optical and thermal infrared data

Land surface soil moisture (SSM) is crucial to research and applications in hydrology, ecology, and meteorology. To develop a SSM retrieval model for bare soil, an elliptical relationship between diurnal cycles of land surface temperature (LST) and net surface shortwave radiation (NSSR) is described and further verified using data that were simulated with the Common Land Model (CoLM) simulation. In addition, with a stepwise linear regression, a multi-linear model is developed to retrieve daily average SSM in terms of the ellipse parameters x₀ (horizontal coordinate of the ellipse centre), y₀ (vertical coordinate of the ellipse centre), a (semi-major axis), and θ (rotation angle), which were acquired from the elliptical relationship. The retrieval model for daily average SSM proved to be independent of soil type for a given atmospheric condition. Compared with the simulated daily average SSM, the proposed model was found to be of higher accuracy. For eight cloud-free days, the root mean square error (RMSE) ranged from 0.003 to 0.031 m³ m^?3, while the coefficient of determination (R²) ranged from 0.852 to 0.999. Finally, comparison and validation were conducted using simulated and measured data, respectively. The results indicated that the proposed model showed better accuracy than a recently reported model using simulated data. A simple calibration decreased RMSE from 0.088 m³ m^?3 to 0.051 m³ m^?3 at Bondville Companion site, and from 0.126 m³ m^?3 to 0.071 m³ m^?3 at the Bondville site. Coefficients of determination R² = 0.548 and 0.445 were achieved between the estimated daily average SSM and the measured values at the two sites, respectively. This paper suggests a promising avenue for retrieving regional SSM using LST and NSSR derived from geostationary satellites in future developments.     

Effects of vegetation and soil texture on surface soil moisture retrieval using multi-temporal optical and thermal infrared observations

To retrieve surface soil moisture (SSM) content over natural surfaces quantitatively, the effects of vegetation and soil texture on a previously developed bare SSM retrieval model are evaluated using simulated data from the common land model (CoLM). The results indicate that (1) both the accuracy and the five model parameters of the previous SSM retrieval model show relatively consistent variations when the fractional vegetation cover (FVC) varies from 0 to 0.7; and (2) the SSM exhibits a generally significant and exponential relationship with the rotation angle when the clay content is lower than 30%, with the FVC ranging from 0 to 0.7. These findings make it possible to estimate SSM directly under the conditions that the underlying surface is in the presence of spatially variable FVC and soil texture. On this basis, we further confirm the feasibility of using the previous bare SSM retrieval model to estimate SSM for FVC varying from 0 to 0.7 with a clay content lower than 30%. For the simulated data on eight cloud-free days, the total root mean square error (RMSE) of the retrieved SSM and the coefficient of determination (R²) are 0.033 m³m^?3 and 0.758, respectively. Ultimately, a preliminary validation is conducted using the ground measurements at the Bondville site; an R² = 0.328 and a RMSE = 0.058 m³m^?3 are obtained for 14 cloud-free days.     

An appraisal of the accuracy of operational soil moisture estimates from SMOS MIRAS using validated in situ observations acquired in a Mediterranean environment

Acquiring information on the spatio-temporal variability of soil moisture is of key importance in extending our capability to understand the Earth system’s physical processes, and is also required in many practical applications. Earth observation (EO) provides a promising avenue to observe the distribution of soil moisture at different observational scales, with a number of products distributed at present operationally. Validation of such products at a range of climate and environmental conditions across continents is a fundamental step related to their practical use. Various in situ soil moisture ground observational networks have been established globally providing suitable data for evaluating the accuracy of EO-based soil moisture products. This study aimed at evaluating the accuracy of soil moisture estimates provided from the Soil Moisture and Ocean Salinity Mission (SMOS) global operational product at test sites from the REMEDHUS International Soil Moisture Network (ISMN) in Spain. For this purpose, validated observations from in situ ground observations acquired nearly concurrent to SMOS overpass were utilized. Overall, results showed a generally reasonable agreement between the SMOS product and the in situ soil moisture measurements in the 0–5 cm soil moisture layer (root mean square error (RMSE) = 0.116 m³ m^?3). An improvement in product accuracy for the overall comparison was shown when days of high radio frequency interference were filtered out (RMSE = 0.110 m³ m^?3). Seasonal analysis showed highest agreement during autumn, followed by summer, winter, and spring seasons. A systematic soil moisture underestimation was also found for the overall comparison and during the four seasons. Overall, the result provides supportive evidence of the potential value of this operational product for meso-scale studies and practical applications.     

Preliminary validation of two temporal parameter-based soil moisture retrieval models using a satellite product and in situ soil moisture measurements over the REMEDHUS network

This study aims to preliminarily validate two newly developed temporal parameter-based surface soil moisture (SSM) retrieval models, namely the mid-morning model and daytime model, using both microwave satellite soil moisture product and in situ SSM measurements over a well-organized soil moisture network named REd de MEDición de la HUmedad del Suelo (REMEDHUS) in Spain. Ground SSM measurements and geostationary satellite observations were primarily implemented to obtain the model coefficients for the two SSM retrieval models for each cloud-free day. These model coefficients were subsequently used to estimate SSM using the Meteosat Second Generation products over the study area. Preliminary verification using both a satellite product and in situ SSM measurements demonstrated that SSM variation can be well detected by both SSM retrieval models. Specifically, a generally similar accuracy (coefficient of determination R²: 0.419–0.379, root mean square error: 0.046–0.051 m³ m^?3, Bias: ?0.020 to ?0.025 m³ m^?3) was found for the mid-morning model and the daytime model with the microwave missions based climate change initiative SSM product, respectively. Moreover, except for the comparable R² (0.614–0.675), a better accuracy (Bias: 0.032–0.044 m³ m^?3, RMSE: 0.043–0.050 m³ m^?3) are achieved for the daytime model and the mid-morning model with network SSM measurements, respectively. These results indicate that the daytime model exhibited generally comparable or better accuracy than that of the mid-morning model over the study area. This study has strengthened the feasibility of using multi-temporal information derived from the geostationary satellites to estimate SSM in future research.     

Downscaling of passive microwave soil moisture retrievals based on spectral analysis

The retrieval of soil moisture from passive microwave remote-sensing data is presently one of the most effective methods for monitoring soil moisture. However, the spatial resolution of passive microwave soil moisture products is generally low; thus, existing soil moisture products should be downscaled in order to obtain more accurate soil moisture data. In this study, we explore the theoretical feasibility of applying the spectral downscaling method to the soil moisture in order to generate high spatial resolution soil moisture based on both Moderate Resolution Imaging Spectroradiometer and Fengyun-3B (FY3B) data. We analyse the spectral characteristics of soil moisture images covering the east-central of the Tibetan Plateau which have different spatial resolutions. The spectral analysis reveals that the spectral downscaling method is reliable in theory for downscaling soil moisture. So, we developed one spectral downscaling method for deriving the high spatial resolution (1 km) soil moister data from the FY3B data (25 km). Our results were compared with the ground truth measurements from 15 selected experimental days in 16 different sites. The average coefficient of determination (R²) of the spectral downscaling increased nearly doubled than that of the original FY3B soil moisture product. The spectral downscaled soil moister data were successfully applied to examine the water exchange between the land and atmosphere in the study regions. The spectral downscaling approach could be an efficient and effective method to improve the spatial resolution of current microwave soil moisture images.     

A methodological approach for spatial downscaling of TRMM precipitation data in North China

Accurate precipitation data with high spatial resolution are crucial for many applications in water and land management. Tropical Rainfall Monitoring Mission (TRMM) data, with accurate, high spatial resolution are crucial for improving our understanding of temporal and spatial variations of precipitation. However, when used in the Three-North Shelter Forest Programme of China, the spatial resolution of TRMM data is too coarse. In this study, we presented a hybrid method, i.e. a regression model with residual correction method, for downscaling annual TRMM 3B43 from 0.25° to 1 km grids from 2000 to 2009. The regression model was applied to construct the relationship among TRMM 3B43 data, continentality (CON), and the normalized difference vegetation index (NDVI) under five different scales (0.25°, 0.50°, 0.75°, 1.00°, and 1.25°). In the residual correction, three spatial interpolation techniques, i.e. inverse distance weighting (IDW), ordinary kriging, and tension spline, were employed. The 1 km monthly precipitation was disaggregated from 1 km annual precipitation by using monthly fractions. Analysis shows that (1) CON was a good variable for precipitation modelling at large-scale regions; (2) the optimum relationship between precipitation, NDVI, and CON was found at a scale of 1.25°; (3) the most feasible option for residual correction was IDW; and (4) the final annual/monthly downscaled precipitation (1 km) not only improved the spatial resolution but also agreed well with data from 220 rain gauge stations (average R² = 0.82, slope = 1.09, RRMSE = 18.30%, and RMSE = 51.91 mm for annual downscaled precipitation; average R² = 0.41, slope = 0.79, RRMSE = 76.88%, and RMSE = 15.09 mm for monthly downscaled precipitation).     

Intercomparison of microwave remote-sensing soil moisture data sets based on distributed eco-hydrological model simulation and in situ measurements over the North China Plain

Intercomparisons of microwave-based soil moisture products from active ASCAT (Advanced Scatterometer) and passive AMSR-E (Advanced Microwave Scanning Radiometer for the Earth Observing System) is conducted based on surface soil moisture (SSM) simulations from the eco-hydrological model, Vegetation Interface Processes (VIP), after it is carefully validated with in situ measurements over the North China Plain. Correlations with VIP SSM simulation are generally satisfactory with average values of 0.71 for ASCAT and 0.47 for AMSR-E during 2007–2009. ASCAT and AMSR-E present unbiased errors of 0.044 and 0.053 m³ m^?3 on average, with respect to model simulation. The empirical orthogonal functions (EOF) analysis results illustrate that AMSR-E provides more consistent SSM spatial structure with VIP than ASCAT; while ASCAT is more capable of capturing SSM temporal dynamics. This is supported by the facts that ASCAT has more consistent expansion coefficients corresponding to primary EOF mode with VIP (R = 0.825, p < 0.1). However, comparison based on SSM anomaly demonstrates that AMSR-E and ASCAT have similar skill in capturing SSM short-term variability. Temporal analysis of SSM anomaly time series shows that AMSR-E provides best performance in autumn, while ASCAT provides lower anomaly bias during highly-vegetated summer with vegetation optical depth of 0.61. Moreover, ASCAT retrieval accuracy is less influenced by vegetation cover, as it is in relatively better agreement with VIP simulation in forest than in other land-use types and exhibits smaller interannual fluctuation than AMSR-E. Identification of the error characteristics of these two microwave soil moisture data sets will be helpful for correctly interpreting the data products and also facilitate optimal specification of the error matrix in data assimilation at a regional scale.     

Spatial information of high-frequency brightness temperatures for passive microwave rainfall retrievals

The effect of rainfall inhomogeneity within the sensor field of view (FOV) affects significantly the accuracy of rainfall retrievals causing the so-called beam-filling error. Observational analyses of Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) and Precipitation Radar (PR) data suggest that the beam-filling error can be classified in terms of the mean rain rate and the rainfall inhomogeneity parameter or coefficient of variation (CV_R, standard deviation divided by mean). The dependence of the beam-filling error on the rain rate and CV_R has been confirmed quantitatively using a single channel at 19.4 GHz. It is also found significantly different beam-filling errors for the two different regions, the East and West Pacific, where the spatial and vertical distributions of rainfalls are different. It is also observed that the vertical distribution of rainfall is related to the spatial variability of rainfall (CV_R) and similarly to the spatial variability of TMI 85.5 GHz brightness temperature (CV _Tb). Based on these findings, this study exploits the CV _Tb to correct the beam-filling error in a direct inversion from a rainfall (R) and brightness temperature (T _b) curve at a single frequency, and to reduce the retrieval error in the context of a Bayesian-type inversion method for multi-frequency rainfall retrievals. Both the experiments suggest that the spatial variability of the high-frequency radiometer data appears to contain useful information for retrievals.