The influence of organic additives on the morphologic and crystalline properties of SnO2 obtained by spray pyrolysis deposition

The paper presents a comparative analysis of the SnO₂ thin layers, obtained via spray pyrolysis deposition (SPD), using polymeric precursors with different compositions and concentrations. The changes in the crystalline structure (X-ray diffraction), morphology and surface energy (atomic force microscopy and contact angle) and electric (electrical conductivity) properties of the layers were investigated. The photocatalytic efficiency of the samples was tested considering these layers' future applications in removing organic pollutants.     

Production of SnO2 nano-particles by hydrogel thermal decomposition method

SnO₂ is an important functional material having a wide range of applications in gas sensors and optoelectronic devices. There is a great interest for finding new cost-effective and straight-forward methods for production of these particles. In this research, hydrogel thermal decomposition method (HTDM) is used for production of high purity SnO₂ nano-particles. Cost effective reactants and green routs of production are the advantages of polysaccharide based hydrogel as starting material for this method. Visual observations indicated that there is very little tendency for agglomeration in the SnO₂ nano-particles produced by this method which can be considered as an advantage for this method over other methods for production of SnO₂ nano-particles. SnO₂ nano-particles are also characterized by X-ray diffraction (XRD) in terms of purity and the sizes. It is found that high purity SnO₂ nano-particles in the size range of 25-36 nm can be produced by HTDM.     

Fast response detection of H2S by CuO-doped SnO2 films prepared by electrodeposition and oxidization at low temperature

Fast response detection of H₂S by CuO-doped SnO₂ films prepared was prepared by a simple two-step process: electrodeposition from aqueous solutions of SnCl₂ and CuCl₂, and oxidization at 600 °C. The phase constitution and morphology of the CuO-doped SnO₂ films were characterized by X-ray diffraction and scanning electron microscopy. In all cases, a polycrystalline porous film of SnO₂ was the product, with the CuO deposited on the individual SnO₂ particles. Two types of CuO-doped SnO₂ films with different microstructures were obtained via control of oxidation time: nanosized CuO dotted island doped SnO₂ and ultra-uniform, porous, and thin CuO film coated SnO₂. The sensor response of the CuO doped SnO₂ films to H₂S gas at 50–300 ppm was investigated within the temperature range of 25–125 °C. Both of the CuO-doped SnO₂ films show fast response and recovery properties. The response time of the ultra-uniform, porous, and thin CuO coated SnO₂ to H₂S gas at 50 ppm was 34 s at 100 °C, and its corresponding recovery time was about 1/3 of the response time.     

Preparation and application in p-n homojunction diode of p-type transparent conducting Ga-doped SnO2 thin films

The direct preparation of p-type transparent conducting Ga-doped SnO₂ thin films and their fundamental application in transparent p-n homojunction diode were realized. The films were grown in an active oxygen ambient using reactive rf magnetron sputtering without post-deposition annealing involved. This method improved the electrical properties of the films while maintaining their optical transparency. By growing a p-type thin film on commercial n-type SnO₂:F-coated glass, transparent p-n homojunction diode was obtained. It exhibits a distinct current-voltage rectifying characteristic, manifesting this p-type thin film and the fabrication technology are suitable for industrial applications.     

One-pot synthesis of intestine-like SnO2/TiO2 hollow nanostructures

In the present study the intestine-like binary SnO₂/TiO₂ hollow nanostructures are one-pot synthesized in aqueous phase at room temperature via a colloid seeded deposition process in which the intestine-like hollow SnO₂ spheres and Ti(SO₄)₂ are used as colloid seeds and Ti-source, respectively. The novel core (SnO₂ hollow sphere)-shell (TiO₂) nanostructures possess a large surface area of 122 m²/g (calcined at 350 °C) and a high exposure of TiO₂ surface. The structural change of TiO₂ shell at different temperatures was investigated by means of X-ray diffraction and Raman spectroscopy. It was observed that the rutile TiO₂ could form even at room temperature due to the presence of SnO₂ core and the unique core-shell interaction.     

Synthesis and ethanol sensing properties of Fe-doped SnO2 nanofibers

Fe-doped SnO₂ nanofibers are synthesized through an electrospinning method and characterized by scanning electron microscopy and transmission electron microscopy. The sensor fabricated from these nanofibers exhibits high sensitivity and rapid response/recovery to ethanol at 300 °C. The sensitivity is up to 15.3 when the sensor is exposed to 100 ppm ethanol, and the response and recovery time is about 1 and 3 s, respectively. The linear dependence of the sensitivity on the ethanol concentration is observed in the range of 10-300 ppm. These results demonstrate that Fe-doped SnO₂ nanofibers can be used as the sensing material for fabricating high performance ethanol sensors.     

Dielectric properties of sol-gel derived Ta2O5 thin films

The dielectric constant and the dielectric loss of tantalum pentoxide (Ta₂O₅) thin films, produced by sol-gel spin-coated process on Corning glass substrates, have been investigated in the frequency range of 20-10⁵ Hz and the temperature range of 183-403 K, using ohmic Al electrodes. The frequency and temperature dependence of relaxation time has also been determined. The capacitance and loss factor were found to decrease with increasing frequency and increase with increasing temperature. The activation energy values were evaluated and a good agreement between the activation energy values obtained from capacitance and dielectric loss factor measurements were observed.     

In-situ preparation of TiO2/SnO2 nanocrystalline sol for photocatalysis

A novel preparation method to synthesize TiO₂/SnO₂ nanocrystalline sol under mild conditions was presented. Ti(OC₄H₉)₄ used as a precursor was hydrolyzed in the rutile SnO₂ nanocrystalline sol, and in-situ formed TiO₂/SnO₂ nanocrystalline sol. The crystal structure, morphology and photocatalysis performance of samples were investigated. The results show that the additional rutile SnO₂ nano grains serve as heterogeneous crystal nucleus and exhibite the inducing effect on TiO₂ grains growth, thus leading to the changes in crystalline phase and particle morphology. In addition, the photoluminescence (PL) spectra analysis indicates that TiO₂/SnO₂ composite structure induces a better charge separation, and thus the photocatalytic activity of TiO₂/SnO₂ sol is increased significantly compared with TiO₂ sol.     

An investigation of super-hydrophilic properties of TiO2/SnO2 nano composite thin films

A sol-gel dip coating technique was used to fabricate TiO₂/SnO₂ nano composite thin films on soda-lime glass. The solutions of SnO₂ and TiO₂ were mixed with different molar ratios of SnO₂:TiO₂ as 0, 3, 4, 6, 8, 9, 10.5, 13, 15, 19.5, 25 and 28 mol.% then the films were prepared by dip coating of the glasses. The effects of SnO₂ concentration, number of coating cycles and annealing temperature on the hydrophilicity of films were studied using contact angle measurement. The films were characterized by means of scanning electron microscopy, X-ray diffraction and atomic force microscopy measurements. The nano composite thin films fabricated with 8 mol.% of SnO₂, four dip coating cycles and annealing temperature of 500 °C showed super-hydrophilicity.     

Influence of surface Pd doping on gas sensing characteristics of SnO2 thin films deposited by spray pirolysis

In this article the analysis of steady state and transient gas sensing characteristics of undoped and Pd surface doped SnO₂ films, deposited by spray pyrolysis, is described. The influence of parameters such as air humidity (2-50% RH), operation temperature (25-500 °C) and Pd surface concentration (0-1% ML Pd) on gas response to CO and H₂ (0.1-0.5%), response time, shape of sensitivity S(T) curves and activation energy of τ(1/kT) dependencies are discussed. A mechanism based on a chemisorption model is proposed to explain how Pd influences the gas sensing characteristics of SnO₂ films.     

Large third-order optical nonlinearity of SrBi2Nb2O9 thin films fabricated by pulsed laser deposition

SrBi₂Nb₂O₉ (SBN) thin films with a single phase of layered perovskite structure have been fabricated on fused quartz substrates at room temperature by pulsed laser deposition. The XRD and AFM analysis indicated that the films had better crystallinity, less rough surface morphology, and larger grain size with increasing oxygen pressure. The nonlinear optical properties of the samples were determined using a single beam Z-scan technique at a laser wavelength of 532 nm with laser duration of 25 ps. The real and imaginary parts of the third-order nonlinear optical susceptibility χ⁽³⁾ of the films were measured to be 3.18 × 10^− 8 esu and 5.94 × 10^− 9 esu, respectively.     

Ultraviolet photodetectors made from SnO2 nanowires

SnO₂ nanowires can be synthesized on alumina substrates and formed into an ultraviolet (UV) photodetector. The photoelectric current of the SnO₂ nanowires exhibited a rapid photo-response as a UV lamp was switched on and off. The ratio of UV-exposed current to dark current has been investigated. The SnO₂ nanowires were synthesized by a vapor-liquid-solid process at a temperature of 900 °C. It was found that the nanowires were around 70-100 nm in diameter and several hundred microns in length. High-resolution transmission electron microscopy (HRTEM) image indicated that the nanowires grew along the [200] axis as a single crystallinity. Cathodoluminescence (CL), thin-film X-ray diffractometry, and X-ray photoelectron spectroscopy (XPS) were used to characterize the as-synthesized nanowires.     

Photocatalytic performance of very thin TiO2/SnO2 stacked-film prepared by magnetron sputtering

TiO₂/SnO₂ stacked-layers are synthesized by reactive sputter deposition on the glass substrate. Very thin TiO₂/SnO₂ bilayer-photocatalysts exhibited a very high photocatalytic activity for a degradation of gaseous acetaldehyde. Both the control of an electronic structure of TiO₂ overlayer in the near-surface region and the interfacial separation of photogenerated electrons/holes in the TiO₂/SnO₂ stacked-layer are keys to improve the photocatalytic performance.     

Synthesis of SnO2/Pd composite films by PVD route for a liquid petroleum gas sensor

Synthesis of SnO₂/Pd composite films was carried out by depositing antimony doped SnO₂ films by magnetron sputtering technique and evaporating a thin layer of palladium on the top of it. This bi-layer structure was subjected to rapid thermal annealing for the incorporation of Pd in SnO₂. The films thus obtained were characterized by measuring electrical, optical and microstructural properties. Liquid petroleum gas-sensing properties were also investigated.     

静电纺丝法制备CuO/SnO2复合材料及其气敏特性研究

为研究p型材料和n型材料复合时气敏特性的变化,采用静电纺丝法分别制备了CuO、SnO_2以及3种比例混合的CuO/SnO_2复合纳米纤维材料,并通过XRD及SEM对其形貌、微观结构等进行表征.测试了该5种材料对丙酮、甲醛、甲醇、乙醇、甲苯等VOC气体的敏感特性.研究表明,CuO/SnO_2=2∶1的复合材料对丙酮、甲苯和乙醇的的响应值有一定提高;CuO/SnO_2=1∶1的复合材料对丙酮具有很高响应的同时,对乙醇和甲苯的响应产生了一定的抑制作用,从而大大提高了材料的选择性.其机理是:半导体材料复合后,在复合材料的表面会有更多的氧吸附,导致更多的VOC气体在半导体材料表面发生反应,使材料的电阻值变化更加明显,提高了材料的响应值.     

Silicon doped SnO2 films for liquid petroleum gas sensor

Silicon doped SnO₂ films were synthesized by sputtering SnO₂ layer onto glass substrates with appropriate amount of silicon sputtered onto them. The bilayer structures were subjected to rapid thermal annealing for the incorporation of Si in SnO₂ matrix. The films thus obtained were characterized by measuring optical and microstructural properties. Liquid petroleum gas (LPG) sensing properties were also investigated. FTIR and Raman studies were also carried out on these films, both, before and after LPG exposure.     

Preparation of CuAlO2 and CuCrO2 thin films by sol-gel processing

CuAlO₂ and CuCrO₂ thin films were prepared by sol-gel processing and subsequent thermal treatment in air and inert gas atmosphere. Resistivities of 700 Ω cm and 60 Ω cm with optical transmissions of 65% and 32% were achieved respectively. The crystallization temperature of 700 °C allows the preparation of CuCrO₂ on borosilicate glass. P-type conductivity was verified by Seebeck measurements and a transparent heterostructure including p-CuCrO₂ showed rectifying behavior.     

Self-construction of SnO2 cubes based on aggration of nanorods

The SnO₂ cubes with the rutile structure have been successfully synthesized without using any catalyst. Their morphology and microstructure were studied by field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HRTEM), and elected area electron diffraction (SAED). It is revealed that the SnO₂ nanocubes exhibit high crystalline quality. The size of the nanocubes ranges from 100 nm to 300 nm. The side surfaces of nanocubes are {110} planes, while their cube axes are [001] direction. The growth mechanism of SnO₂ nanocubes was discussed and we suggested vapor-solid process should dominate the growth. These SnO₂ nanostructures represent an important example of spontaneous organization.     

Structural and magnetic properties of epitaxial SnFe2O4 thin films

Epitaxial thin films of SnFe₂O₄ are deposited on sapphire substrate by ablating the sintered SnFe₂O₄ target with a KrF excimer laser (λ = 248 nm and pulsed duration of 20 ns). X-ray diffraction study reveals that SnFe₂O₄ films are epitaxial along (222) direction. The optical bandgap of SnFe₂O₄ film is estimated using transmittance vs. wavelength data and is observed to be 2.71 eV. The presence of hysteresis loop at room temperature in magnetization vs. field plot indicates the ferromagnetic behavior of the film. It is observed that the coercive field and remnant magnetization decrease with increase in temperature.     

Thermo-optic properties of TiO2, Ta2O5 and Al2O3 thin films for integrated optics on silicon

The direct measurement of the thermo-optic coefficients of aluminium oxide, tantalum pentoxide and titanium dioxide thin films is presented. Using ellipsometry on monolithically integrated permutations of the layers of silicon, silicon dioxide and the material under test, allows the direct measurement of the overall thermo-optic coefficient accounting for thermally induced changes in the dielectric permittivity and density of the materials as well as the elasto-optic effect due to the non-matching thermal expansion coefficients of the different materials.