Structure and electrical properties of (1 − x)Bi0.5Na0.5TiO3-xBi0.5K0.5TiO3 ceramics near morphotropic phase boundary

The binary lead-free piezoelectric ceramics with the composition of (1 − x)Bi_0.5Na_0.5TiO₃-xBi_0.5K_0.5TiO₃ were synthesized by conventional mixed-oxide method. The phase structure transformed from rhombohedral to tetragonal phase in the range of 0.16 ≤ x ≤ 0.20. The grain sizes varied with increasing the Bi_0.5K_0.5TiO₃ content. Electrical properties of ceramics are significantly influenced by the Bi_0.5K_0.5TiO₃ content. Two phase transitions at T_t (the temperature at which the phase transition from rhombohedral to tetragonal occurs) and T_c (the Curie temperature) were observed in all the ceramics. Adding Bi_0.5K_0.5TiO₃ content caused the variations of T_t and T_c. A diffuse character was proved by the linear fitting of the modified Curie-Weiss law. Besides, the ceramics with homogeneous microstructure and excellent electrical properties were obtained at x = 0.18 and sintered at 1170 °C. The piezoelectric constant d₃₃, the electromechanical coupling factor K_p and the dielectric constant ?_r reached 144 pC/N, 0.29 and 893, respectively. The dissipation factor tan δ was 0.037.     

Morphotropic phase boundary and piezoelectric properties of (Bi1/2Na1/2)1 − x(Bi1/2K1/2)xTiO3-0.03(Na0.5K0.5)NbO3 ferroelectric ceramics

Lead-free piezoelectric ceramics, (Bi_1/2Na_1/2)_1 − x(Bi_1/2K_1/2)_xTiO₃-0.03(Na_0.5K_0.5)NbO₃ (x = 0.10-0.40) were synthesized by conventional solid-state sintering. A morphotropic phase boundary (MPB) between rhombohedral and tetragonal phases was confirmed. Two dielectric anomalies can be observed, showing diffused phase transition behavior. There is no shift of the dielectric maximum temperature with frequency due to the contribution of space charge at high temperatures, similar to pure (Bi_1/2Na_1/2)TiO₃. The materials near MPB show a strong compositional dependence with the optimal properties of a d₃₃ of 167 pC/N, a k_p of 35.5%, a P_r of 27.6 μC/cm² and a E_c of 27.9 kV/cm, suitable for future application.     

Electrical and luminescence properties of Er-doped Bi0.5Na0.5TiO3 ceramics

The influences of Er content on the dielectric and photoluminescence performances of Bi_0.5Na_0.5TiO₃-xEr (x = 0, 0.005, 0.01, 0.015, 0.02, 0.03) ceramics have been investigated. The results show that Bi_0.5Na_0.5TiO₃-xEr ceramics with x = 0.01 Er have maximum values of photoluminescence and piezoelectric properties. A bright green emission at 550 nm and enhanced piezoelectric response are achieved in the ceramic Bi_0.5Na_0.5TiO₃-0.01Er at room temperature. Furthermore, the photoluminescence performance of the ceramics is significantly enhanced by electric poling.     

Ferroelectric properties of lithia-doped (Bi0.95Na0.75K0.20)0.5Ba0.05TiO3 ceramics

Lead-free piezoelectric (Bi_0.95Na_0.75K_0.20−xLi_x)_0.5Ba_0.05TiO₃ ceramics have been prepared by conventional process for different lithium substitutions. The SEM images show that the ceramics are well sintered at 1428 K. Dielectric and ferroelectric measurements have been performed. With the increasing of lithium substitution, the Curie temperature of the (Bi_0.95Na_0.75K_0.20−xLi_x)_0.5Ba_0.05TiO₃ ceramics shifts from 570 K to 620 K, but the maximum value of the dielectric constant decreases from 6700 to 4700 correspondingly. A relatively larger remanent polarization of 36.8 μC/cm² has been found in the x = 0.05 sample. The coercive field decreases as the lithium substitution amount increases. An optimized d₃₃ = 194 × 10^− 12 C/N and a relative dielectric constant ε_r = 1510 have been obtained in (Bi_0.95Na_0.75K_0.15Li_0.05)_0.5Ba_0.05TiO₃.     

Effect of Na/K excess on the electrical properties of Na0.5Bi0.5TiO3-K0.5Bi0.5TiO3 thin films prepared by sol-gel processing

(Na_0.85K_0.15)_0.5Bi_0.5TiO₃ (NKBT) thin films derived from different amounts of Na/K excess content were fabricated via an aqueous sol-gel method on a Pt(111)/Ti/SiO₂/Si substrate, and the effect of Na/K excess content on the microstructure and electrical properties of the NKBT thin films was investigated. A second phase appears when Na/K excess content is below 20 mol%. Appropriated Na/K excess can enhance the polarization and dielectric properties due to compensation of Na/K loss that occurred during heat treatment. The 20 mol% excess derived NKBT thin film exhibits the best ferroelectric and dielectric properties with a remnant polarization (Pr) of 13.6 μC/cm², and a coercive field (Ec) of 104.8 KV/cm, together with a dielectric constant of 406 and a dissipation factor of 0.064. Similar to the dielectric response change with Na/K excess content, the decreasing concentration of charged defects is the main reason resulting in the increase of the piezoelectric property. The film with a 20 mol% excess content exhibited an effective d₃₃^? of about 56 pm/V. Also, the NKBT with a 20 mol% excess content exhibits the lowest current density of 5.6 × 10^− 5 A/cm² at 10 V.     

Structure and ferroelectric properties in (K0.5Bi0.5)TiO3-BiScO3-PbTiO3 piezoelectric ceramic system

(K_0.5Bi_0.5)TiO₃-BiScO₃-PbTiO₃ ceramics were synthesized by conventional solid-state method. A morphotropic phase boundary (MPB) was confirmed with the aid of structural analysis. Two dielectric anomalous peaks were observed, the one around dielectric maximum temperature (T_m) due to phase transformation from ferroelectric to paraelectric while the second one could be ascribed to space charges. Furthermore, the existence of space charges also resulted in the independence of T_m with frequency at low lead composition. A new high temperature piezoelectric ceramic, 0.30(K_0.5Bi_0.5)TiO₃-0.30BiScO₃-0.40PbTiO₃ close to MPB exhibited excellent electrical properties with T_m of 384 °C, d₃₃ of 247 pC/N, k_p of 38.9%, P_r of 19.41 μC/cm², and E_c of 2.25 kV/mm, indicative of a candidate for high temperature application.     

Influences of poling condition and sintering temperature on piezoelectric properties of (Na0.5Bi0.5)1 − xBaxTiO3 ceramics

The structure, ferroelectric characteristics and piezoelectric properties of (Na_0.5Bi_0.5)_1 − xBa_xTiO₃ (x = 0.04, 0.06, 0.10) ceramics prepared by conventional solid state method were investigated. The influences of poling condition and sintering temperature on the piezoelectric properties of the ceramics were examined. The piezoelectric properties of the ceramics highly depend on poling field and temperature, while no remarkable effect of poling time on the piezoelectric properties was found in the range of 5-25 min. Compared with (Na_0.5Bi_0.5)_0.96Ba_0.04TiO₃ and (Na_0.5Bi_0.5)_0.90Ba_0.10TiO₃, the piezoelectric properties of (Na_0.5Bi_0.5)_0.94Ba_0.06TiO₃ are more sensitive to poling temperature due to the relatively low depolarization temperature. Moderate increase of sintering temperature improved the poling process and piezoelectric properties due to the development of microstructural densification and crystal structure. With respect to sintering behavior and piezoelectric properties, a sintering temperature range of 1130-1160 °C was ascertained for (Na_0.5Bi_0.5)_0.90Ba_0.10TiO₃.     

V-doping effects on ferroelectric properties of K0.5Bi4.5Ti4O15 thin films

V-doped K_0.5Bi_4.5Ti₄O₁₅ (K_0.5Bi_{4.5 − x/3}Ti_4 − xV_xO₁₅, KBTiV-x, x = 0.00, 0.01, 0.03, and 0.05) thin films were prepared on a Pt(111)/Ti/SiO₂/Si(100) substrate by a chemical solution deposition method. The thin films were annealed by using a rapid thermal annealing process at 750 °C for 3 min in an oxygen atmosphere. Among them, KBTiV-0.03 thin film exhibited the most outstanding electrical properties. The value of remnant polarization (2P_r) was 75 μC/cm² at an applied electric field of 366 kV/cm. The leakage current density of the thin film capacitor was 5.01 × 10⁻⁸ at 100 kV/cm, which is approximately one order of magnitude lower than that of pure K_0.5Bi_4.5Ti₄O₁₅ thin film capacitor. We found that V doping is an effective method for improving the ferroelectric properties of K_0.5Bi_4.5Ti₄O₁₅ thin film.     

Dielectric, ferroelectric and piezoelectric properties of Bi0.5Na0.5TiO3-(Ba0.7Ca0.3)TiO3 ceramics at morphotropic phase boundary composition

(1 − x)Bi_0.5Na_0.5TiO₃-x(Ba_0.7Ca_0.3)TiO₃ (BNT-xBCT, 0 ≤ x ≤ 0.15) solid solutions have been synthesized by a conventional solid state sintering method for obtaining a morphotropic phase boundary (MPB) with good piezoelectric properties. X-ray diffraction patterns reveal that a MPB of rhombohedral and tetragonal phases is formed at compositions 0.09 ≤ x ≤ 0.12. Addition of BCT into BNT greatly lowered coercive field E_c without degrading remanent polarization P_r. The specimen with x = 0.09 has the good piezoelectric properties: d₃₃ = 125 pC/N and k_p = 0.33. A modified Curie-Weiss law was used to fit the dielectric constant of BNT-xBCT ceramics, and a frequency dispersion was observed during the phase transitions from antiferroelectric to paraelectric in specimens with x exceeding 0.06.     

Fabrication of lead-free (Na0.82K0.18)0.5Bi0.5TiO3 piezoelectric nanofiber by electrospinning

(Na_0.82K_0.18)_0.5Bi_0.5TiO₃ nanofibers were synthesized by sol-gel process and electrospinning. Scanning electron microscopy was used to verify that the diameters and lengths are in the range of 150-600 nm and several hundreds of micrometer. Perovskite structure and grain size (20-70 nm) were verified by X-ray diffraction and transmission electron microscopy. The high effective piezoelectric coefficient d₃₃ (96 pm/V) was measured by scanning force microscopy. It may be attributed to easily tilting the polar vector of domain for an electric field and the increase in the number of possible spontaneous polarization direction near the rhombohedral-tetragonal morphotropic phase boundary. The research shows that there are potentional applications for (Na_0.82K_0.18)_0.5Bi_0.5TiO₃ nanofiber in nanoscale lead-free piezoelectric devices.     

Enhanced multiferroic properties and tunable magnetic behavior in multiferroic BiFeO3-Bi0.5Na0.5TiO3 solid solutions

A series of multiferroic (1−x)BiFeO₃−x(Bi_0.5Na_0.5)TiO₃ (BF-BNT) (x = 0 − 0.6) solid solution ceramics were prepared by a sol-gel method. The XRD results show that increasing BNT content induce a gradual phase transformation from rhombohedral to pseudocubic structure near x = 0.4. Compared with pure BiFeO₃, superior multiferroic properties are obtained for x = 0.3 with remnant polarization P_r = 1.49 μC/cm² and saturated magnetization M_s = 0.51 emu/g. Importantly, the paramagnetic (PM) to ferromagnetic (FM) transition is observed for the solutions, and the Curie temperature (T_C) can be tuned by varying the content of BNT. This observed FM ordering is discussed in terms of the possible existence of the long-range superexchange interaction of Fe³⁺-O-Ti-O-Fe³⁺ in the chemically ordered regions.     

Ferroelectric and pyroelectric properties of (Na0.5Bi0.5)TiO3-BaTiO3 based trilayered thin films

Trilayered Bi_3.25La_0.75Ti₃O₁₂ (25 nm)/(Na_0.5Bi_0.5)_0.94Ba_0.06TiO₃ (300 nm)/Bi_3.25La_0.75Ti₃O₁₂ (25 nm) and Pb(Zr_0.4Ti_0.6)O₃ (25 nm)/(Na_0.5Bi_0.5)_0.94Ba_0.06TiO₃ (300 nm)/Pb(Zr_0.4Ti_0.6)O₃ (25 nm) thin films without undesirable phases have been deposited on Pt/Ti/SiO₂/Si substrates. It was found that the Bi_3.25La_0.75Ti₃O₁₂ and Pb(Zr_0.4Ti_0.6)O₃ layers are very effective to inhibit the charge transport in the trilayered films. Much better insulating properties than those of (Na_0.5Bi_0.5)_0.94Ba_0.06TiO₃ films have been achieved in the trilayered films. The trilayered films show good dielectric, ferroelectric and pyroelectric properties. Remnant polarizations 2P_r of 16 µC/cm² and 34 µC/cm², pyroelectric coefficients of 4.8 × 10^− 4 C m^− 2 K^− 1 and 7.0 × 10^− 4 C m^− 2 K^− 1 have been obtained for the Bi_3.25La_0.75Ti₃O₁₂/(Na_0.5Bi_0.5)_0.94Ba_0.06TiO₃/Bi_3.25La_0.75Ti₃O₁₂ and Pb(Zr_0.4Ti_0.6)O₃/(Na_0.5Bi_0.5)_0.94Ba_0.06TiO₃/Pb(Zr_0.4Ti_0.6)O₃ thin films, respectively. The trilayered films are promising candidates for sensor and actuator applications.     

Dielectric and piezoelectric properties of Y2O3 doped (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free piezoelectric ceramics

Y₂O₃ doped lead-free piezoelectric ceramics (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ (0-0.7 wt%) were synthesized by the conventional solid state reaction method, and the effect of Y₂O₃ addition on the structure and electrical properties was investigated. X-ray diffraction shows that Y₂O₃ diffuses into the lattice of (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ to form a solid solution with a pure perovskite structure. The temperature dependence of dielectric constant of Y₂O₃ doped samples under various frequencies indicates obvious relaxor characteristics different from typical relaxor ferroelectric and the mechanism of the relaxor behavior was discussed. The optimum piezoelectric properties of piezoelectric constant d₃₃ = 137 pC/N and the electromechanical coupling factor k_p = 0.30 are obtained at 0.5% and 0.1% Y₂O₃ addition, respectively.     

Dielectric and ferroelectric properties of A-site non-stoichiometric Na0.5Bi0.5TiO3-based thin films

The A-site non-stoichiometry of [(Na_0.7K_0.2Li_0.1)_0.45Bi_0.55]TiO_3 + x (NKLBT) films were epitaxially deposited on LaNiO₃(100)/Si substrates using metal organic decomposition. The structural evolution of NKLBT films annealed at different temperatures is studied and a single perovskite phase can be found at the low temperature of 600 °C. Ferroelectric hysteresis measurement shows a higher remanent polarization value of 15.6 μC/cm² with a lower coercive field of 89 kV/cm at 450 kV/cm due to the lower concentration of oxygen vacancies by the donor doping effect. The frequency dependence of the capacitance-voltage behavior and the correlation between the capacitance-voltage and polarization-electric field are analyzed. The dielectric constant and dissipation factor are measured to be 690 and 0.04, respectively, at a frequency of 1 MHz.     

Influence of sintering temperature on piezoelectric properties of (K0.5Na0.5)NbO3-LiNbO3 lead-free piezoelectric ceramics

Lead-free piezoelectric ceramics (1 − x)(K_0.5Na_0.5)NbO₃-xLiNbO₃ have been synthesized by traditional ceramics process without cold-isostatic pressing. The effect of the content of LiNbO₃ and the sintering temperature on the phase structure, the microstructure and piezoelectric properties of (1 − x)(K_0.5Na_0.5)NbO₃-xLiNbO₃ ceramics were investigated. The result shows that the phase structure transforms from the orthorhombic phase to tetragonal phase with the increase of the content of LiNbO₃, and the orthorhombic and tetragonal phase co-exist in (K_0.5Na_0.5)NbO₃-LiNbO₃ ceramics when the content of LiNbO₃ is about 0.06 mol. The sintering temperature of (1 − x)(K_0.5Na_0.5)NbO₃-xLiNbO₃ decreases with the increase of the content of LiNbO₃. The optimum composition for (1 − x)(K_0.5Na_0.5)NbO₃-xLiNbO₃ ceramics is 0.94(K_0.5Na_0.5)NbO₃-0.06LiNbO₃. The optimum sintering temperature of 0.94(K_0.5Na_0.5)NbO₃-0.06LiNbO₃ ceramics is 1080 °C. Piezoelectric properties of 0.94 (K_0.5Na_0.5)NbO₃-0.06LiNbO₃ ceramics under the optimum sintering temperature are piezoelectric constant d₃₃ of 215 pC/N, planar electromechanical coupling factor k_p of 0.41, thickness electromechanical coupling factor k_t of 0.48, the mechanical quality factor Q_m of 80, the dielectric constant of 530 and the Curie temperature T_c = 450 °C, respectively. The results indicate that 0.94(K_0.5Na_0.5)NbO₃-0.06LiNbO₃ piezoelectric ceramics is a promising candidate for lead-free piezoelectric ceramics.     

Structure and electrical properties of Bi0.5Na0.5TiO3-Y0.5Na0.5TiO3-BaTiO3 lead-free piezoelectric ceramics

New (1 – x ? y)Bi_0.5Na_0.5TiO₃-xY_0.5Na_0.5TiO₃-yBaTiO₃ lead-free ceramics have been prepared by a conventional ceramic fabrication technique, and their structure and electrical properties have been studied. A morphotropic phase boundary (MPB) of rhombohedral and tetragonal phases is formed at 0.04 < y < 0.10. As compared to pure Bi_0.5Na_0.5TiO₃ ceramic, the partial substitutions of Y³⁺ for Bi³⁺ and Ba²⁺ for (Bi_0.5Na_0.5)²⁺ in the A-sites of Bi_0.5Na_0.5TiO₃ lower effectively the coercive field E _c and increase the remanent polarization P _r of the ceramics. Because of low E _c, large P _r and the MPB, the ceramics with x = 0–0.02 and y = 0.06 exhibit the optimum piezoelectric properties: d ₃₃ = 155–159 pC/N and k _p = 28.8–36.7%. The temperature dependences of dielectric properties of the ceramics show relaxor-like behaviors. The ferroelectric properties at different temperature suggest that the ceramics may contain both the polar and non-polar regions near/above T _d.     

Synthesis and characterization of (Na0.85K0.15)0.5Bi0.5TiO3 ceramics by different methods

The (Na_0.85K_0.15)_0.5Bi_0.5TiO₃ (BNKT) powders were synthesized by solid-state method, sol-gel method and stearic acid method. Microstructure, piezoelectric and dielectric properties of the ceramics were investigated. Attempts had been made to understand the reaction processes by using thermo gravimetric (TG) and differential scanning calorimetry (DSC). The BNKT powders have a perovskite structure with average crystallite sizes of 168 nm, 85 nm and 79 nm, corresponding to the solid-state method, the sol-gel method and the stearic acid method, respectively. The ceramics derived from the powder synthesized by sol-gel method presents the most homogeneous microstructure and largest grain size (5-7 μm). The effects of average crystallite size on microstructures and electric properties of the BNKT ceramics were investigated. Both the piezoelectric properties and dielectric properties were enhanced with the increase of grain size.     

Sol-gel synthesis of lead-free (K0.5Bi0.5)0.4Ba0.6TiO3 nanorods

A kind of lead-free ferroelectric nanorods, (K_0.5Bi_0.5)_0.4Ba_0.6TiO₃, has been prepared by the sol-gel process. The phase formation, structure and morphological analyses of (K_0.5Bi_0.5)_0.4Ba_0.6TiO₃ were investigated by XRD, FTIR, Raman and TEM. The results revealed that single-crystalline (K_0.5Bi_0.5)_0.4Ba_0.6TiO₃ nanorods with width around 80 to 120 nm, and length around 200-300 nm were obtained by calcining dried gels at 800 °C for 2 h. Raman analysis of (K_0.5Bi_0.5)_0.4Ba_0.6TiO₃ nanorods indicated that A₁(TO₂) and E(TO) mode incorporated into one broad peak at around 285 cm^− 1, which can be attributed to the cation disorder (Bi, K, Ba) on the 12-fold coordinated A site of ABO₃ structure.     

Giant strain in Nb-doped Bi0.5(Na0.82K0.18)0.5TiO3 lead-free electromechanical ceramics

The effect of Nb substitution on the crystal structure, ferroelectric, and electric field induced strain properties of Bi_0.5(Na₈₂K_0.18)_0.5TiO₃ (BNKT) ceramics has been investigated. The coexistence of rhombohedral and tetragonal phases was found in undoped BNKT ceramics, however, Nb doping induced a phase transition to a pseudocubic phase with high electrostriction coefficients. When 3 mol% Nb was substituted on Ti ions, the electric field induced strain was markedly enhanced up to S_max/E_max = 641 pm/V, which is higher than those previously reported on non-textured lead-free electromechanical ceramics.     

Topochemical synthesis of plate-like Na0.5Bi0.5TiO3 templates from Bi4Ti3O12

Plate-like templates for the development of grain oriented microstructures are required for lead-free piezoelectric ceramics with directionality of properties. Plate-like Na_0.5Bi_0.5TiO₃ templates with perovskite structure were synthesized by the Topochemical Microcrystal Conversion (TMC) method from bismuth layer-structured ferroelectric compound Bi₄Ti₃O₁₂. The TMC-derived NBT templates, with diameters of 5-15 µm and an average thickness of 0.7 µm, maintained the morphology of Bi₄Ti₃O₁₂ precursors, showing a high degree of preferred pseudocubic < 001> orientation. The Na_0.5Bi_0.5TiO₃ particles prepared could serve as good templates for the preparation of grain oriented lead-free NBT-based piezoelectric ceramics.