Gelatinization and rheological properties of rice starch/xanthan mixtures: Effects of molecular weight of xanthan and different salts

Effects of molecular weight (M_w) of xanthan (XG) and salts (0.1 M NaCl or CaCl₂) on the pasting, thermal, and rheological properties of rice starch (RS) were studied. A series of five XG samples, having various M_w, was prepared by homogenization of native XG solutions in the presence or absence of salts. The presence of salts greatly reduced the intrinsic viscosities, [η], of all XG solutions. Rapid visco-analysis (RVA) data showed that XG addition increased the peak, breakdown, final, and setback viscosities of RS, either in the presence or absence of salts, whereas the pasting temperatures were unaffected. Differential scanning calorimetry (DSC) demonstrated that the gelatinization temperatures of RS were unaffected by XG addition but slightly increased by CaCl₂ addition, whereas the gelatinization enthalpies (ΔH) were significantly decreased by additions of XG and salts. Dynamic shear data revealed weak gel-like behaviour in all paste samples in which their rigidity was decreased by XG addition. Flow tests showed that all pastes exhibited time-dependent shear-thinning (thixotropic) with yield stress behaviour in which the hysteresis loop areas were significantly decreased by XG addition, whereas the other rheological parameters varied differently among the samples, with and without added salt. In general, the effects of XG addition on the pasting and rheological properties of RS were more pronounced with increasing M_w of XG and these effects depended on salts added.     

Functional characterization of flour of selected cowpea (Vigna unguiculata) varieties: canonical discriminant analysis

Characterization of 28 varieties of cowpea flour, based on Brabender pasting properties of flour slurry (12% w/w flour: water), was achieved by canonical discriminant analysis. Pasting viscosities at various points on the amyiogram, pasting temperature and paste viscosity ratios were obtained for each variety of flour. Significant varietal influence on pasting properties was indicated by ANOVA (P<0.01) and MANOVA. The hot paste viscosity at 95 °C (HTPV) and the hot paste capacity index (HPCI) had the highest correlations with the 1st and 2nd canonical variables and together accounted for 78% of total variance in the whole dataset. A plot of the second canonical variable against the 1st canonical variable showed that varieties situated together had HTPV values within close ranges. The hot paste viscosity (HTPV) was the most discriminating paste viscosity and could become an important index of functionality of cowpea flour.     

Effect of ionic gums and dry heating on physicochemical,morphological, thermal and pasting properties of water chestnut starch

Starch from water chestnuts (Trapa natans) was isolated and modified by dry heating and hydrocolloids [carboxy methyl cellulose (CMC) and sodium alginate]. Native and modified starches were evaluated for their physicochemical, pasting, thermal and morphological properties. Pasting and thermal properties were studied using Rapid Visco Analyzer (RVA) and Differential Scanning Calorimeter (DSC) respectively. Morphological properties were studied by Scanning Electron Microscopy (SEM). Modification of the starch by dry heating with and without gums reduced paste clarity and increased the water and oil binding capacity; solubility and swelling power decreased. Dry heating of native starch increased peak viscosity; however, with addition of CMC, peak viscosity decreased. Starch modified with CMC and 4 h heating exhibited lowest gelatinization temperature (T₀). Pasting characteristics of native water chestnut starch were largely affected by the addition of gums and/or heat treatment. Overall onset gelatinization temperature reduced with heat treatment and addition of gums. Morphological studies revealed no significant variation in starch granule size. Starch granules were seen agglomerated because of leaching of amylose and granule interspacing decreased with addition of gums.     

Effect of cellulose ethers on the microstructure of fried wheat flour-based batters

The effect of type, molecular weight, and concentration of cellulose ethers on the microstructure of fried batter-coated potatoes in two batter systems: controlled viscosity batters (CVB) at 1200 cP and controlled initial moisture content batters (CIMB) at 134 g/100 g flour, were studied by coating cylindrical potatoes (10 mm diameter and 50 mm long) with treatment batters and fried at 160 °C for 3 min. The coatings were separated and their structures were viewed by scanning electron microscopy technique. The micrographs of fried batters showed that different types of cellulose ethers with the same molecular weight and concentration did not affect the microstructures of batters. The viscosity and water content of batters as well as the molecular weight and concentration of cellulose ethers altered the microstructure of fried batters. For CVB, the structure of fried batter containing methylcellulose of higher molecular weight and concentration with simultaneous higher moisture content showed greater hole-size which allowed higher amount of oil penetration through the batter into the food substrate. In contrast, the structure of CIMB with a higher molecular weight and concentration of methylcellulose was relatively more continuous; therefore, it might help in preventing oil penetration into the food substrate.     

FUNCTIONAL AND CHEMICAL PROPERTIES OF IKIVUNDE AND INYANGE, TWO TRADITIONALLY PROCESSED BURUNDIAN CASSAVA FLOURS

Ikivunde and Inyange are traditionally processed cassava flours that are widely consumed in Burundi. Functional and chemical properties were measured at fermentation periods of 0, 24, 48, 72, 96 and120 h. Yield, bulk density, dispersibility, crude fiber and pasting temperature (PT) increased as the fermentation time increased for both products. In addition, decreases in pH, starch, cyanide, peak viscosity (PV), hot paste viscosity, cold paste viscosity and water retention capacity were also observed as the fermentation time increased. At the end of the fermentation period, Ikivunde exhibited higher yield, dispersibility, bulk density and PT but showed lower water retention capacity and PV than Inyange. Color parameters showed that Ikivunde became whiter while Inyange turned yellowish in color as the fermentation time increased. Overall, the fermentation of cassava has a profound effect on the functional and chemical properties of both Ikivunde and Inyange.     

Physicochemical properties of thermal alkaline treated pigeonpea (Cajanus cajan L.) flour

Thermal alkaline treatment, normally used for corn, was applied to pigeonpea grains. Starch granules were isolated using wet milling and alkaline treatments. Effects of the calcium hydroxide [Ca(OH)₂] concentration in the range of 0–1% (w/v) on granule structure, crystalline structure, chemical composition, and physicochemical, thermal, and pasting properties of isolated starch granules were determined. Compared to native samples, thermal alkaline treated samples had higher protein, lipid, calcium, and phosphorus contents, but lower starch and amylose contents. Thermal alkaline treatment increased starch granular size and gelatinization temperatures, but decreased relative crystallinity, gelatinization enthalpy, swelling power, solubility, amylose leaching, and the pasting viscosity. Amylose-lipid complexes were not found in thermal alkaline treated flours. As the Ca(OH)₂ concentration increased, the amylose content, relative crystallinity, gelatinization temperature, and enthalpy also increased, but the swelling power, solubility, amylose leaching, and paste viscosity decreased. A higher Ca(OH)₂ concentration produced more stable starch granules that resisted re-gelatinization.     

Effect of hydrocolloids on the rheological, microscopic, mass transfer characteristics during frying and quality characteristics of puri

Effect of hydrocolloids such as guar gum (GG), arabic gum (AG), carrageenan (CG), locust bean gum (LBG), xanthan gum (XN), hydroxypropyl methylcellulose (HPMC) and carboxymethylcellulose (CMC) at 0.5% w/w level on rheological and quality parameters of puri from whole wheat flour was studied. Hydrocolloids like CMC, XN and HPMC increased the water absorption of puri dough, while it decreased in all other samples. The dough development time and mixing tolerance index values increased, while dough stability did not get affected. On addition of hydrocolloid, there was a reduction in the pasting temperature, while the peak viscosity, hot paste viscosity and cold paste viscosity values increased. Hardness, cohesiveness and adhesiveness properties of the puri dough increased with the addition of hydrocolloids. All the hydrocolloids used in general helped in retention of moisture in the puri and hence remained softer and pliable, while there was a significant reduction in the oil content of puri samples containing hydrocolloids. Among the different hydrocolloids used, addition of guar gum at 0.5% w/w level led to puris having improved quality characteristics to a greater extent with respect to moisture retention, lowering of oil content upon frying with softer and pliable texture and better keeping quality. The mass transfer studies confirmed that the mass transfer co-efficient values for moisture loss and oil uptake were lower in puris with guar gum than control.     

Comparative study of the functional,thermal and pasting properties of flours from different field pea (Pisum sativum L.) and pigeon pea (Cajanus cajan L.) cultivars

Physicochemical, functional, thermal and pasting properties of flours from field pea (LFP-48 and PG-3) and pigeon pea (AL-15 and AL-201) cultivars were determined and related to each other using Pearson correlation and principal component analysis (PCA). Field pea flours (FPF) were significantly (P < 0.05) different from pigeon pea flours (PPF) in their lower ash and higher fat and protein contents. FPF also exhibited higher L^∗, ΔE value, water solubility index (WSI), oil absorption capacity (OAC), foaming capacity (FC) and lower a^∗, b^∗ value, water absorption index (WAI) and water absorption capacity (WAC) in comparison to PPF. FPF differed significantly from PPF in exhibiting lower transition temperatures (T_o, T_p, T_c), enthalpy of gelatinization (ΔH_gel), peak height index (PHI) and higher gelatinization temperature range (R). PCA showed that LFP-48 and PG-3 flours were located at the far left of the score plot with a large negative score, while the AL-15 and AL-201 flours had large positive scores in the first principal component. Several significant correlations between functional, thermal and pasting properties were revealed, both by Pearson correlation and PCA. Pasting properties of the flours, measured using the rapid visco analyzer (RVA), also differed significantly. PPF were observed to have higher pasting temperature (PT), peak viscosity (PV), trough viscosity (TV), breakdown (BV), final viscosity (FV) and lower setback viscosity (SV) as compared to FPF.     

Buckwheat and Millet Affect Thermal,Rheological, and Gelling Properties of Wheat Flour

Buckwheat (BF) and millet (MF) are recommended as healthy foods due to their unique chemical composition and health benefits. This study investigated the thermal and rheological properties of BF‐WF (wheat flour) and MF‐WF flour blends at various ratios (0:100 to 100:0). Increasing BF or MF concentration led to higher cold paste viscosity and setback viscosity of pasting properties gel adhesiveness, storage modulus (G′) and loss modulus (G″) of dynamic oscillatory rheology, and yield stress (σ₀) of flow curve of WF. BF and MF addition decreased peak viscosity and breakdown of pasting, gel hardness, swelling volume, and consistency coefficient (K) of flow curve of WF. Thermal properties of the blends appeared additive of that of individual flour. Nonadditive effects were observed for some property changes in the mixtures, and indicated interactions between flour components. This may provide a physicochemical basis for using BF and MF in formulating novel healthy products.     

Gelatinization and Pasting Properties of Waxy and Non‐waxy Rice Starches

Gelatinization and pasting properties of diverse rice types grown in two locations were examined by differential scanning calorimetry (DSC) and rotational rheometry, respectively. The data were compared to previously reported molecular starch properties for these samples: specifically, amylose content, starch molecular weight (M_w), and amylopectin side‐chain‐length distributions. Significant correlations were observed between amylose content, starch M_w, and the weight degree of polymerization of the long side chains of amylopectin F₁(DP_w) and many of the gelatinization and pasting properties measured. Higher amylose content corresponded with increased gelatinization onset (T_o) and peak temperatures (T_p), pasting onset and peak temperatures, and decreased peak and trough viscosity. Starch M_w correlated negatively with T_o, T_p, pasting onset, and peak temperature and positively with peak, trough, final, and breakdown viscosity. Amylopectin with DP_w 59‐78 of F₁(DP_w) correlated with increased T_o, T_p, pasting onset and peak temperature, and decreased peak, trough, final and breakdown viscosity. Pasting properties were also somewhat related to DP_w 21 of shorter side chains of amylopectin (F₂(DP_w)). Significant correlations between F₂(DP_w) and peak, final, and breakdown viscosity were observed (r = −0.447*, −0.391*, −0.388*, peak, final, and breakdown viscosity, respectively).     

Chemometric Analysis of the Gelatinization and Pasting Properties of Long‐grain Rice Starches in Relation to Fine Structure

Chemometric tests were carried out to better understand the multidimensional facet of starch fine structure‐relationship concerning gelatinization and pasting properties. With Ward's hierarchical cluster analysis 20 long‐grain rice starch samples were sorted out into three clusters based on similarities in functional properties, particularly, paste peak (PV) and final viscosity (FV). The three clusters (arbitrarily named Clusters A, B, and C) exhibited a pasting profile trend of PV<FV, PV˜FV, and PV>FV, respectively. Cluster A samples were also lower in peak temperature, range and enthalpy of gelatinization, and swelling power. These attributes were associated with higher amylose content (AM), β‐amylolysis limit, and percentage of B1 chains (DP13‐24), but lower amylopectin weight‐average molar mass (M_w) and percentage of A chains (DP6‐12). A 5‐variable linear discriminant function correctly predicted 85% of the Ward's cluster membership of the individual cultivars. The discriminant function included the variables A, B1, and B2 (DP25‐36) chains, average chain length (ACL), and gyration radius (R_z). Fine structure variance was fully explained by a total of nine principal components, with the first three components cumulatively accounting for 74%. The leading variables included in the three rotated components pertained to amylopectin chain length distribution (A, B2, and B3+ or DP≥37 chains, and ACL) and amylopectin molar mass (M_w, R_z, and polydispersity). AM and M_w were loaded most frequently in the 4‐variable, best‐fit linear regression models for predicting gelatinization and pasting properties. A combination of at least two fine structure variables controls the functionality of rice starch.     

甲基纤维素对面糊流变性能及油炸挂糊肉片油脂渗透的影响

为增强油炸挂糊食品外裹糊稳定性以及降其含油率,本研究以甲基纤维素（MC）为研究对象,通过在面糊中加入0.4%~1.2%的甲基纤维素,探讨其对面糊流变性能、热特性及油炸挂糊肉片脂肪含量的影响。结果表明:随着MC添加量的增加,面糊的挂糊率和黏度不断上升,面糊黏弹性凝胶形成速度加快,同时热稳定性得到提高。添加MC可以有效地降低油炸挂糊肉片的脂肪含量,且当添加量为1%时,外壳与肉的脂肪含量最低分别为14.29%和3.05%,与对照组相比分别降低了61.06%和31.15%,苏丹红染色区域最小,油脂渗透深度最低为0.08 mm,其抑油效果最佳。因此,甲基纤维素能有效地改善面糊的流变性能以及降低油炸挂糊食品的脂肪含量。     

大米淀粉磷酸酯的制备及其理化性质研究

为合理地利用丰富的大米淀粉资源,以大米淀粉为原料,尿素为催化剂,正磷酸盐为酯化剂,采用响应曲面法确定了制备大米淀粉磷酸酯的最佳工艺条件:磷酸盐用量为淀粉质量的46.61%,催化剂用量为淀粉质量的4.03%,反应pH为5.5,反应时间为4.6 h。在此条件下制得的磷酸酯淀粉的取代度为0.020 34。并用扫描电镜(SEM)对反应前后淀粉颗粒的形貌进行了观察,结果表明,磷酸酯化后,部分淀粉颗粒受到侵蚀。同时研究了大米淀粉磷酸酯的理化性质,包括溶解度、膨胀度、糊化特性、凝沉性、冻融稳定性及黏弹特性。结果表明,相对于原淀粉,磷酸酯淀粉的溶解度、膨胀度、黏度有所提高,糊化温度、凝沉性、凝胶硬度和强度则下降。     

Effects of cationization on DSC thermal profiles,pasting and emulsifying properties of sago starch

Cationic sago starches were prepared using an aqueous alkaline process with different levels of cationic reagent 3‐chloro‐2‐hydroxypropyltrimethylammonium chloride (0.01–0.10 M ), sodium hydroxide (0.03–0.86 M ) and reaction temperature (30–62 °C). The degree of substitution (DS), reaction efficiency, thermal and pasting properties of cationic sago starches were analysed. Emulsifying and fat binding properties of native sago starch, cationized sago starch and commercial chitosan were compared at two different pH values (4 and 7). Degree of substitution increased with an increase in concentration of cationic reagent or NaOH, or reaction temperature. The reaction efficiency was proportional to the concentration of NaOH and reaction temperature but inversely proportional to the cationic reagent concentration. The highest DS and reaction efficiency achieved was 0.06 and 79%, respectively. The pasting temperature and gelatinization enthalpy of cationic starch (DS 0.06) were lower compared with native sago starch. Cationization increased the peak viscosity and breakdown of the starch paste but decreased the setback. The presence of cationic groups significantly increased emulsion stability, emulsion viscosity and fat binding capacity of sago starch. However, the cationic sago starch was still inferior to chitosan, which showed the highest emulsion stability, emulsion viscosity and fat binding capacity. There was no significant difference between the surface tension values of native and cationic sago starch and chitosan. The influence of pH on emulsifying properties was not significant. The emulsion stability of the cationic sago starch improved due to an increase in viscosity and fat binding capacity but not its surface active property. Copyright © 2004 Society of Chemical Industry     

Pasting Properties of Non‐waxy Rice Starch‐Hydrocolloid Mixtures

The swelling and pasting properties of non‐waxy rice starch‐hydrocolloid mixtures were investigated using commercial and laboratory‐generated hydrocolloids. The swelling power of the rice starch‐hydrocolloid mixtures was generally depressed at low concentration of hydrocolloids (0–0.05%), but increased directly with increasing hydrocolloid concentrations (0.05–0.1%). In gellan gum dispersion, the swelling power at 100°C was higher than that of control. The rice starch‐hydrocolloids mixtures showed shear‐thinning flow behavior (n = 0.26–0.49). Hydrocolloids except the exopolysaccharide from S. chungbukensis (EPS‐CB) increased apparent viscosity and consistency index (K) of rice starch dispersions, but decreased the n value. Hydrocolloids enhanced the trough and final viscosity of rice starch dispersions but EPS‐CB reduced the viscosity of rice starch pastes. Hydrocolloids lowered peak viscosity but addition of guar gum resulted in high peak viscosity, apparent viscosity, and consistency index of rice starch dispersions. Total setback viscosity appeared to be not affected by hydrocolloids at low concentration (0.05%). The hot and cold paste of the starch‐gellan gum mixture exhibited the highest viscosity values in the Brookfield viscometer.     

Characterization of Pea Starches in the Presence of Alkali and Borax

Refined field pea (Pisum sativum L.) starches were prepared from air‐classified pea starch by washing or from whole pea by wet milling, and analyzed for their physicochemical and pasting characteristics in the presence of alkali and borax. Commercial corn and high amylose corn starches were included in the study for comparative purposes. The two pea starches exhibited similar physicochemical characteristics. Amylose content markedly influenced pasting and other characteristics of the corn starches. Pea starch and high amylose corn starch exhibited little viscosity development during pasting in deionized water. The presence of alkali or borax significantly altered the peak viscosities and cold paste stabilities of all four starches in a concentration dependent manner. Alkali and borax increased peak and cold paste viscosity and reduced syneresis in all cases.     

Effect of heating–cooling on rheological properties of tapioca starch paste with and without xanthan gum

The effect of xanthan gum (Xan) on pasting and gelatinization behavior of tapioca starch (TS) was investigated. Rheological measurements of TS/Xan mixtures with 5% w/w total polysaccharide concentration at different mixing ratios (10/0, 9.5/0.5, 9/1 and 8.5/1.5) were performed to understand the pasting and gelatinization behavior of TS with and without Xan on heating–cooling cycle using a Rapid Visco Analyzer (RVA) and conventional rheometers. Xan increased storage modulus (G′) and loss modulus (G″) of TS dispersions during gelatinization process. Pastes of TS/Xan tended to be more solid-like, i.e., G′ larger than G″, with increasing Xan. The G′ of TS/Xan paste increased when kept at 10 °C indicating the network formation. Pasting temperatures, peak viscosity, final viscosity and breakdown values of TS increased with increasing Xan content but the opposite result was observed in setback value from RVA measurement. Temperature dependence of steady shear viscosity became less pronounced with increasing Xan content on both cooling and reheating indicating that Xan made the mixture more thermally stable. All the results suggest that the sample preparation and measuring conditions influence the rheological properties of TS/Xan mixtures, which should be taken into account in food application.     

Prediction of sweetpotato starch physiochemical quality and pasting properties using near-infrared reflectance spectroscopy

A rapid predictive method based on near-infrared reflectance (NIR) spectroscopy (NIRS) was developed to measure sweetpotato starch physiochemical quality and pasting properties. The starch samples were scanned by NIRS and analyzed for quality properties by reference methods, respectively. Results of statistical modeling indicated that NIRS was reasonably accurate in predicting amylose content (AC), amylose percent (AP), total starch content (TSC), protein content (PRC), phosphorus content (PHC), solubility (SOL), swelling power (SP), average granule diameter (AGD), big granule percent (BGP), small granule percent (SGP), crystallinity (CRY), peak viscosity (PKV), hot paste viscosity (HPV), setback (SB), and pasting temperature (P_temp) with high coefficients of determination (RSQ = 0.85–0.92) and relatively low standard errors of prediction. The results showed that NIR analysis was sufficiently accurate and effective for rapid evaluation of starch physicochemical properties in sweetpotato. The NIR-based protocol developed in this study can be used for screening large number of starch samples in food enterprises and sweetpotato breeding programs.     

Effects of Cationization on Functional Properties of Pea and Corn Starches

Amylography, scanning electron microscopy and storage tests demonstrated that native pea starches were highly resistant to granule disintegration during heating in dilute slurries, resulting in low hot paste viscosity, high retrogradation and syneresis. Cationization at degrees of substitution of 0.02 to 0.05 reduced the pasting and gelatinization temperatures, increased peak viscosities and set-back on cooling but eliminated syneresis after storage at 4°C and − 15°C. The principal effects of cationization were to promote rapid granule dispersion at low pasting temperatures, yielding a molecular dispersion of amylose and amylopectin on heating to 95°C. On cooling, the gel structures were firm and the cationic groups controlled the realignment of starch chains during low temperature storage.     

Production and properties of exopolysaccharide by Rhodotorula acheniorum MC

Production of exopolysaccharide by Rhodotorula acheniorum MC was studied. Polysaccharide synthesis, biomass concentration, sugar consumption, pH value, dynamic viscosity and NH₄⁺ concentration were studied in batch fermentation under aeration 0.75 vvm and agitation 500 rpm. In a medium containing 50 g/litre sucrose the maximum amount of exopolysaccharide 6.2 g/litre and 10.2 g/litre biomass were obtained at 96 h. The chemical composition of the polysaccharide was carbohydrate — 98.2%, protein — 1.2%, ash — 0.4%, monosaccharide: mannose — 92.8% and glucose — 7.2%. The interaction between the polysaccharide synthesized by Rh.acheniorum MC polymer and xanthan showed synergistic effect. The viscosity of a mannan–xanthan (20:80) mixture was 40% higher as compared to the xanthan alone.