Vacuum ultraviolet excited photoluminescence properties of novel Na3Y9O3(BO3)8:Eu phosphor

The novel vacuum ultraviolet (VUV) excited Na₃Y₉O₃(BO₃)₈:Eu³⁺ red phosphor was synthesized and the photoluminescence (PL) properties were investigated. The phosphor showed strong VUV PL intensity, large quenching concentration (40 mol%) and good chromaticity (0.649, 0.351). The Eu³⁺-O²⁻ charge transition (CT) was observed to be at a higher energy (232 nm, 5.35 eV). The host absorption at 127-166 nm was broad and strong when monitoring the Eu³⁺ emission, which indicated that energy transfer from the host-lattice to the Eu³⁺ ions was efficient in Na₃Y₉O₃(BO₃)₈:Eu³⁺. These excellent VUV PL properties were revealed to be correlated with the unique isolated layer-type structure of Na₃Y₉O₃(BO₃)₈ host. The results showed that the Na₃Y₉O₃(BO₃)₈:Eu³⁺ would be a good candidate for VUV-excited red phosphor.     

Synthesis of ZnO flowers and their photoluminescence properties

Flower-like ZnO nano/microstructures have been synthesized by thermal treatment of Zn(NH₃)₄²⁺ precursor in aqueous solvent, using ammonia as the structure directing agent. A number of techniques, including X-ray diffraction (XRD), field emission scan electron microscopy (FESEM), transmission electron microscopy (TEM), thermal analysis, and photoluminescence (PL) were used to characterize the obtained ZnO structures. The photoluminescence (PL) measurements indicated that the as-synthesized ZnO structures showed UV (∼375 nm), blue (∼465 nm), and yellow (∼585 nm) emission bands when they were excited by a He-Gd laser using 320 nm as the excitation source. Furthermore, it has been interestingly found that the intensity of light emission at ∼585 nm remarkably decreased when the obtained ZnO nanocrystals were annealed at 600 °C for 3 h in air. The reason might be the possible oxygen vacancies and interstitials in the sample decreased at high temperature.     

Encapsulation of Coumarin 151 into the mesopores of modified rodlike SBA-15

Dye Coumarin 151 was postgrafted into the rodlike SBA-15 mesoporous materials, which were synthesized by a direct hydrothermal synthesis method and further modified by an organic silane with a terminal amino group. Characterization by powder X-ray diffraction, N₂ adsorption-desorption, transmission electron microscopy, photoluminescence and scanning electron microscopy were carried out. Small-angle X-ray diffraction and N₂ adsorption-desorption characterizations showed that these dye containing materials remained as ordered mesostructures and the pore size was from 6 nm for blank sample to 3.6 nm for postgrafting sample. PL characterization of composite samples exhibited optical properties with different dye concentrations. The characterization showed the existence of Coumarin 151 in the channels of SBA-15 and the composite materials with novel optical properties enabled possible applications in optical sensing and electron acceptors.     

Synthesis and photoluminescence properties of CaSiO3:Eu spheres prepared by the reverse micelles soft template

We report here the successful synthesis of CaSiO₃:Eu³⁺ spheres using the reverse micelles soft template. The influence of the calcination temperature on the shape, crystallization and photoluminescence properties of the prepared spheres was investigated by DTA-TG, XRD, IR, SEM and PL. The results showed that the temperature of crystallization (from amorphous phase to β-CaSiO₃) is 668 °C. The temperature of phase transition (from β-CaSiO₃ to α-CaSiO₃) is 790 °C. The average size of CaSiO₃:Eu³⁺ spheres calcined at 700 °C was about 350 nm. The radiation was dominated by the red emission peak at 613 nm and the highest emission intensity was observed when the spheres were calcined at 700 °C. When calcined at 800 °C, the spheres are almost cracked and melted down, due to the high temperature.     

An approach to suppress the blue-shift of photoluminescence peaks in coupled multilayer InAs/GaAs quantum dots by high temperature post-growth annealing

Effect of post-growth annealing on 10 layer stacked InAs/GaAs quantum dots (QDs) with InAlGaAs/GaAs combination capping layer grown by molecular beam epitaxy has been investigated. The QD heterostructure shows a low temperature (8 K) photoluminescence (PL) emission peak at 1267 nm. No frequency shift in the peak emission wavelength is seen even for annealing up to 700 °C which is desirable for laser devices requiring strict tolerances on operating wavelength. This is attributed to the simultaneous effect of the strain field, propagating from the seed layer to the active layer of the multilayer QD (MQD) and the indium atom gradient in the capping layer due to the presence of a quaternary InAlGaAs layer. Higher activation energy (of the order of ∼250 meV) even at 650 °C annealing temperature also signifies the stronger carrier confinement potential of the QDs. All these results demonstrate higher thermal stability of the emission peak of the devices using this QD structure.     

Optical characterization of Bi doped SrS nanophosphors

Optical properties of Bi³⁺ doped SrS nanophosphors synthesized by solid state diffusion method in the presence of sodium thiosulfate as a flux have been reported. UV-vis absorption and photoluminescence (PL) spectra of SrS phosphors doped with trivalent Bi³⁺ ions either alone or in combination with charge compensating ions, were also studied. These studies reflect that the incorporation of Bi³⁺ into host lattice is facilitated by the charge compensating Na⁺ ions. PL emission for SrS:Bi shows a peak at 481 nm at an excitation wavelength of 430 nm, which is attributed to the transition from the ³P₁ to ¹S₀ states of Bi³⁺. We have also investigated the effect of different dopant concentrations on PL emission intensity.     

Photoluminescence, thermally stimulated luminescence and electron paramagnetic resonance investigations of Tb doped SrBPO5

Trap level spectroscopic studies were carried out on γ-irradiated Tb (1 mole%) doped SrBPO₅ were carried out using photoluminescence (PL), thermally stimulated luminescence (TSL) and electron paramagnetic resonance (EPR) techniques. The incorporation of Tb in the 3+ oxidation state was ascertained from PL studies. Life time for Tb³⁺ emission corresponding to the intense transition ⁵D₄ → ⁷F₅ at 543 nm was determined. The spectral characteristics of the TSL glows have shown that Tb³⁺ ions act as the emission center for the glow peak at 475 K. The trap parameters of the glow peak were determined. EPR investigations at room temperature/77 K revealed the stabilization of three boron oxygen hole trapped centers (BOHC's) and oxygen centered radicals such as O⁻ and O₂⁻ and trapped electrons in room temperature γ-irradiated samples. TSL glow peak at 475 K was found to be associated with recombination of electron released from trapped electron center and the BOHC₂ center.     

Synthesis and characterization of ?-Fe3N/GaN, 54/46-composite nanowires

?-Fe₃N/GaN, 54/46-composite nanowires (aspect ratio: 40), with core-shell structure, are synthesized by wet chemical method. Structural and morphological investigations are performed using X-ray diffraction (XRD)-Rietveld analysis and microscopy techniques. The encapsulation of ?-Fe₃N by GaN is probed by X-ray photoelectron spectroscopy (XPS). The in-depth profile analysis probes the large interface region consisting both the phases. Although the respective surface oxynitride phases are present, the nitride phases are dominant inside the nanowires. The interface region of the nanowires influences the low temperature magnetic behavior. The superparamagnetic and ferromagnetic fractions coexist even at 5 K, due to the nanowire size distribution. Spin-glass-like collective ordering is observed below 50 K due to the freezing of the localized frustrated spins. Room temperature photoluminescence (PL) reveals the presence of surface states in the GaN shell.     

Effect of boron doping on optical properties of sol-gel based nanostructured zinc oxide films on glass

Boron doped zinc oxide thin films (∼80 nm) were deposited onto pure silica glass by sol-gel dip coating technique from the precursor sol/solution of 4.0 wt.% equivalent oxide content. The boron concentration was varied from 0 to 2 at.% w.r.t. Zn using crystalline boric acid. The nanostructured feature of the films was visualized by FESEM images and the largest cluster size of ZnO was found in 1 at.% boron doped film (B1ZO). The presence of mixed crystal phases with hexagonal as major phase was identified from XRD reflections of the films. Particle size, optical band gap, visible specular reflection, room temperature photoluminescence (PL) emissions (3.24-2.28 eV), infra-red (IR) and Raman active longitudinal optical (LO) phonon vibration were found to be dependent on dopant concentration. For the first time, we report the room temperature fine structured PL emissions as phonon replicas originated from the LO phonon (both IR and Raman active) in 1 at.% boron doped zinc oxide film.     

Photoinduced charge property of nanosized perovskite-type LaFeO3 and its relationships with photocatalytic activity under visible irradiation

In this paper, ABO₃-type perovskite LaFeO₃ nanosized photocatalysts were synthesized by a sol-gel method, using citric acid (HOOCCH₂C(OH)(COOH)CH₂COOH) as complexing reagent and La(NO₃)₃·6H₂O and Fe (NO₃)₃·9H₂O as raw materials. The as-prepared samples also were characterized by several testing techniques, such as thermogravimetry-differential thermal analysis (TG-DTA), X-ray powder diffraction (XRD), Brunauer-Emmett-Teller (BET), infrared spectrum (IR), ultraviolet-visible diffuse reflection spectrum (UV-vis DRS), photoluminescence spectrum (PL), surface photovoltage spectroscopy (SPS) and electrical field induced surface photovoltage spectroscopy (EFISPS). The sample activity of different LaFeO₃ nanoparticles for degrading Rhodamine B solution under visible irradiation (λ > 400 nm) was evaluated. The effects of thermal treatment temperature on photoinduced charge property and photocatalytic activity were mainly investigated, together with their relationships. The results show that the LaFeO₃ sample calcined at 500 °C exhibits higher activity, and the activity decreases with increasing calcination temperature, which is in good agreement with the characterization results. The weaker is the PL and SPS signal, the higher is the photocatalytic activity. Moreover, the activity of all as-prepared LaFeO₃ samples is higher than that of international P-25 TiO₂ under visible irradiation.     

Synthesis and characterization of bismuth doped barium sulphide nanoparticles

We have synthesized BaS:Bi nanocrystalline powder of average grain size 35 nm by solid-state diffusion method using sodium thiosulphate as a flux. During this work we have optimized the nature and amount of flux, amount of the dopant and temperature of firing for maximum yield of photoluminescence. The samples were characterized by X-ray powder diffraction (XRD) method, transmission electron microscopy (TEM), photoluminescence (PL) and UV-visible techniques. On excitation by 425 nm, these nanophosphors give one emission peak at 575 nm which corresponds to green color. In the excitation spectra of these particles there are two peaks at 350 nm and 425 nm. The effect of dopant concentration on the photoluminescence of BaS:Bi nanocrystallites has been studied which is in agreement with the principle of concentration quenching. The energy band gap of bismuth doped BaS nanopowder has been calculated to be 4.25 eV and is blue shifted in comparison to their bulk counterparts. The blue shift may be due to the quantum confinement in the particles.     

Synthesis of ultrafine YAG:Tb phosphor by nitrate-citrate sol-gel combustion process

Ultrafine terbium-doped yttrium aluminum garnet (YAG:Tb) phosphor powders are prepared by a nitrate-citrate sol-gel combustion process using 1:1 ratio of citrate/nitrate. Phase evolution of the synthesized powder is determined by X-ray diffraction (XRD) techniques. Single-phase cubic YAG:Tb crystalline powder is obtained by calcinating the amorphous materials at 900 °C and no intermediate phase is observed. Transmission electronic microscope (TEM) morphology shows that the resultant YAG:Tb powders have uniform size and good homogeneity. The particle size of the product is investigated as a function of the calcination temperature. The photoluminescence (PL) spectrum of Tb³⁺ substituted for Y³⁺ in YAG with 5.0% content has been measured on samples calcined at different temperatures.     

Ultrasonic-assisted synthesis and magnetic studies of iron oxide/MCM-41 nanocomposite

Iron oxide nanoparticles were stabilized within the pores of mesoporous silica MCM-41 amino-functionalized by a sonochemical method. Formation of iron oxide nanoparticles inside the mesoporous channels of amino-functionalized MCM-41 was realized by wet impregnation using iron nitrate, followed by calcinations at 550 °C in air. The effect of functionalization level on structural and magnetic properties of obtained nanocomposites was studied. The resulting materials were characterized by powder X-ray diffraction (XRD), high-resolution transmission electron microscopy and selected area electron diffraction (HRTEM and SAED), vibrating sample and superconducting quantum interface magnetometers (VSM and SQUID) and nitrogen adsorption–desorption isotherms measurements. The HRTEM images reveal that the most of the iron oxide nanoparticles were dispersed inside the mesopores of silica matrix and the pore diameter of the amino-functionalized MCM-41 matrix dictates the particle size of iron oxide nanoparticles. The obtained material possesses mesoporous structure and interesting magnetic properties. Saturation magnetization value of magnetic iron oxide nanopatricles stabilized in MCM-41 amino-functionalized by in situ sonochemical synthesis was 1.84 emu g⁻¹. An important finding is that obtained magnetic nanocomposite materials exhibit enhanced magnetic properties than those of iron oxide/MCM-41 nanocomposite obtained by conventional method. The described method is providing a rather short preparation time and a narrow size distribution of iron oxide nanoparticles.     

Growth of quantum-confined CdS nanoparticles inside Ti-MCM-41 as a visible light photocatalyst

CdS nanocrystallites have been successfully incorporated into the mesopores of Ti-MCM-41 by a two-step method involving ion-exchange and sulfidation. The X-ray diffraction patterns (XRD), UV-vis absorption spectra (UV-vis), photoluminescence spectra (PL), Raman spectra and N₂ adsorption-desorption isotherms were used to characterize the structure of the composite materials. It is found that most of the CdS nanocrystallites are about 2.6 nm, less than the pore diameter of Ti-MCM-41. The CdS nanocrystallites inside the mesopores of Ti-MCM-41 host show a significant blue shift in the UV-vis absorption spectrum. Under irradiation of visible light (λ > 430 nm), the composite material has greater and more stable photocatalytic activity for hydrogen evolution than bulk CdS, which can be explained by the effective charge separation between the CdS nanocrystallites and mesoporous Ti-MCM-41.     

Optical properties of the InAs/InAlGaAs quantum dots subjected to thermal treatments

The inter-diffusion kinetics of group-III elements at the interface between self-assembled InAs quantum dots (QDs) and InAlGaAs barriers were investigated indirectly by post-growth annealing treatments and photoluminescence (PL) spectroscopy. The emission wavelength of the InAs/InAlGaAs QDs subjected to thermal annealing at 550 °C was 1444 nm at 10 K, which indicated a 57 nm red shift compared to the as-grown sample (1387 nm). The emission wavelength was blue-shifted with further increases in annealing temperature to 650 °C. Although there was a blue shift in the emission wavelength at an annealing temperature of 600 and 650 °C, the emission peak was still longer than that of the as-grown sample. These results were explained by the difference in inter-diffusion probability between group-III elements at the interface between the InAs QDs and InAlGaAs barrier.     

Synthesis, characterization and optical properties of sheet-like ZnO

Sheet-like ZnO with regular hexagon shape and uniform diameter has been successfully synthesized through a two-step method without any metal catalyst. First, the sheet-like ZnO precursor was synthesized in a weak alkaline carbamide environment with stirring in a constant temperature water-bath by the homogeneous precipitation method, then sheet-like ZnO was obtained by calcining at 600 °C for 2 h. The structures and optical properties of sheet-like ZnO have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and UV-vis-NIR spectrophotometer. The results reveal that the product is highly crystalline with hexagonal wurtzite phase and has appearance of hexagon at (0 0 0 1) plane. The HRTEM images confirm that the individual sheet-like ZnO is single crystal. The PL spectrum exhibits a narrow ultraviolet emission at 397 nm and a broad visible emission centering at 502 nm. The band gap of sheet-like ZnO is about 3.15 eV.     

Synthesis by an ionic liquid-assisted method and optical properties of nanoflower Y2O3

Flower-like Y₂O₃ nano-/microstructured phosphors without metal activators have successfully been fabricated by an ionic liquid (IL)-assisted method involving temperature (600 °C) annealing. In this paper, the effect of IL concentration on the morphology of the product has been investigated. The IL plays a crucial role in the formation of various morphologies of Y₂O₃. The structural and morphological features of the obtained samples have been characterized by means of X-ray powder diffraction (XRD) analysis, photoluminescence spectra (PL), Fourier-transform infrared (FT-IR) spectra and X-ray photoelectron spectra (XPS). The photoluminescence spectra of the products exhibit an intense bluish-white emission (ranging from 405 to 430 nm and centered at 418 nm). The luminescent mechanisms have been ascribed to the carbon impurities in the Y₂O₃ host. The effect of the ILs cation and the counter anions on the Y₂O₃ morphology of these nanostructures was studied experimentally. It was observed that Y₂O₃ morphology and PL of these nanostructures were strongly influenced by the type of cation and anion. As the length of the subsidiary chain of cation section of IL (imidaziole ione) reduces, the thickness of the nano-sheets increases. It is expected that the present method may easily be extended to similar nano-/microstructures of other oxide materials. Such investigations are currently underway.     

Photoluminescence characteristics of ZnO clusters confined in the micropores of zeolite L

Sub-nanometric ZnO clusters were prepared in the micropores of zeolite L by the incipient wetness impregnation method. The X-ray patterns (XRD), transmission electron microscope (TEM), N₂ adsorption-desorption isotherms, UV-vis absorption spectra (UV-vis) and photoluminescence spectra (PL) were used to characterize the composite materials. The results indicate that a small amount of sub-nanometric ZnO clusters can be introduced into the channel of zeolite L, however, when the amount of ZnO loading exceeds 20 wt%, macrocrystalline ZnO appears on the external surface of zeolite L. Different from bulk ZnO materials, these sub-nanometric ZnO clusters exhibit their absorption onset below 255 nm and a blue luminescence band in the range of 404-422 nm. The temperature-dependent luminescence demonstrates that the amount of the ZnO loading significantly affects the exciton-phonon interaction between the ZnO clusters and the zeolite host. The ZnO clusters exhibit a picosecond scale emission lifetime at room temperature.     

Facile synthesis, optical and photoconductive properties of novel ZnO nanocones

Large-scale, uniform ZnO nanocones with tips about 200 nm and length about 50 μm have been synthesized by a facile hydrothermal method. The morphology and structures were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and high-resolution transmission electron microscope (HR-TEM). The effects of reaction time and PEG-400 on the morphology of ZnO nanostructures were investigated, also an oriented attachment mechanism has been briefly proposed. The optical properties were investigated by lasing confocal microscope and photoluminescence spectrum, a strong near band edge emission peak centered at 387 nm from the ZnO nanocones was observed in photoluminescence spectrum. Finally, we have fabricated UV photodetector based on single ZnO nanocone, which present good switching properties by turning the UV light on and off.     

Photoluminescence from terbium doped silica-titania prepared by a sol-gel method

Terbium doped (0.5 at.%) TiO₂-SiO₂ (30%/70%) was prepared by a sol-gel method. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) were used to characterize the powder calcined at two different temperatures. At a low temperature of 550 °C an amorphous phase was obtained, but at a higher temperature of 1000 °C, the anatase TiO₂ phase was crystallized in the amorphous SiO₂ phase. Green photoluminescence from ultraviolet excitation was detected after heating to either temperature, but the amorphous sample heated to 550 °C exhibited a higher intensity. X-ray diffraction and photoluminescence excitation data are discussed to explain these observations.