A new true-single-phase-clocking BiCMOS dynamic pipelined logicfamily for high-speed, low-voltage pipelined system applications

New true-single-phase-clocking (TSPC) BiCMOS/BiNMOS/BiPMOS dynamic logic circuits and BiCMOS/BiNMOS dynamic latch logic circuits for high-speed dynamic pipelined system applications are proposed and analyzed. In the proposed circuits, the bootstrapping technique is utilized to achieve fast near-full-swing operation. The circuit performance of the proposed new dynamic logic circuits and dynamic latch logic circuits in both domino and pipelined applications are simulated by using HSPICE with 1 μm BiCMOS technology. Simulation results have shown that the new dynamic logic circuits and dynamic latch logic circuits in both domino and pipelined applications have better speed performance than that of CMOS and other BiCMOS dynamic logic circuits as the supply voltage is scaled down to 2 V. The operating frequency and power dissipation/MHz of the pipelined system, which is constructed by the new clock-high-evaluate-BiCMOS dynamic latch logic circuit and clock-low-evaluate-BiCMOS (BiNMOS) dynamic latch logic circuit, and the logic units with two stacked MOS transistors, are about 2.36 (2.2) times and 1.15 (1.1) times those of the CMOS TSPC dynamic logic under 1.5-pF output loading at 2 V, respectively. Moreover, the chip area of these two BiCMOS pipelined systems is about 1.9 times and 1.7 times as compared with that of the CMOS TSPC pipelined system. A two-input dynamic AND gate fabricated with 1 μm BiCMOS technology verifies the speed advantage of the new BiNMOS dynamic logic circuit. Due to the excellent circuit performance in high-speed, low-voltage operation, the proposed new dynamic logic circuits and dynamic latch logic circuits are feasible for high-speed, low-voltage dynamic pipelined system applications     

Bootstrapped full-swing BiCMOS/BiNMOS logic circuits for 1.2-3.3 Vsupply voltage regime

Novel full-swing BiCMOS/BiNMOS logic circuits using bootstrapping in the pull-up section for low supply voltage down to 1 V are reported. These circuit configurations use noncomplementary BiCMOS technology. Simulations have shown that they outperform other BiCMOS circuits at low supply voltage using 0.35 μm BiCMOS process. The delay and power dissipation of several NAND configurations have been compared. The new circuits offer delay reduction between 40 and 66% over CMOS in the range 1.2-3.3 V supply voltage. The minimum fanout at which the new circuits outperform CMOS gate is 5, which is lower than that of other gates particularly for sub-2.5 V operation     

A bootstrapped bipolar CMOS (B2CMOS) Gate forlow-voltage applications

This paper reports on a BiCMOS logic gate which combines bootstrapping and transient saturation techniques to achieve full swing operation down to 1.1 V supply voltage. The proposed B²CMOS uses a conventional (noncomplementary) BiCMOS process. HSPICE simulations have been used to compare the B²CMOS to CMOS, BiNMOS, and BS-BiCMOS for sub-0.5 μm BiCiMOS technologies. Simulation results have shown that the B²CMOS gate outperforms CMOS, BiNMOS, and BS-BiCMOS gates at 3 V and below. The crossover capacitance/fanout of the B²CMOS gate is 100 fF (i.e., fanout of 4) at 1.5 V. The delay-to-load sensitivity of the B²CMOS is 220 ps/pF (8 ps/fanout) which is one order of magnitude smaller than that of CMOS at 1.5 V     

BiCMOS circuit technology for a 704 MHz ATM switch LSI

This paper describes BiCMOS level-converter circuits and clock circuits that increase VLSI interface speed to 1 GHz, and their application to a 704 MHz ATM switch LSI. An LSI with a high speed interface requires a BiCMOS multiplexer/demultiplexer (MUX/DEMUX) on the chip to reduce internal operation speed. A MUX/DEMUX with minimum power dissipation and a minimum pattern area can be designed using the proposed converter circuits. The converter circuits, using weakly cross-coupled CMOS inverters and a voltage regulator circuit, can convert signal levels between LCML and positive CMOS at a speed of 500 MHz. Data synchronization in the high speed region is ensured by a new BiCMOS clock circuit consisting of a pure ECL path and retiming circuits. The clock circuit reduces the chip latency fluctuation of the clock signal and absorbs the delay difference between the ECL clock and data through the CMOS circuits. A rerouting-Banyan (RRB) ATM switch, employing both the proposed converter circuits and the clock circuits, has been fabricated with 0.5 μm BiCMOS technology. The LSI, composed of CMOS 15 K gate logic, 8 Kb RAM, I Kb FIFO and ECL 1.6 K gate logic, achieved an operation speed of 704-MHz with power dissipation of 7.2 W     

A 1.5-V full-swing BiCMOS logic circuit

A BiCMOS logic circuit applicable to sub-2-V digital circuits has been developed. A transiently saturated full-swing BiCMOS (TS-FS-BiCMOS) logic circuit operates twice as fast as CMOS at 1.5-V supply. A newly developed transient-saturation technique, with which bipolar transistors saturate only during switching periods, is the key to sub-2-V operation because a high-speed full-swing operation is achieved to remove the voltage loss due to the base-emitter turn-on voltage. Both small load dependence and small fan-in dependence of gate delay time are attained with this technique. A two-input gate fabricated with 0.3-μm BiCMOS technology verifies the performance advantage of TS-FS-BiCMOS over other BiCMOS circuits and CMOS at sub 2-V supply     

The SDC cell-A novel design methodology for high-speed arithmeticmodules using CMOS/BiCMOS precharged circuits

The shielded dynamic complex-gate (SDC) cell is a cell-based design methodology for generating high-speed modules or macrocells using precharged circuit technology. In order to achieve ultrafast operation, a BiCMOS precharged circuit has been developed. This circuit is about 1.5 to 2.0 times faster than the conventional CMOS precharged circuit. The effect of alpha-particle injection under low-voltage operation has been studied, and CMOS/BiCMOS precharged circuits with alpha-particle-induced noise suppression have been proposed. A 32-b arithmetic and logic unit (ALU) utilizing a BiCMOS SDC cell designed and fabricated with 0.5-μm BiCMOS technology is discussed. The application of the SDC cell design to a mainframe execution unit (parallel adder) is also described     

A sub-2.0 V BiCMOS logic circuit with a BiCMOS charge pump

A BiCMOS logic circuit with very small input capacitance has been developed, which operates at low supply voltages. A High-beta BiCMOS (Hβ-BiCMOS) gate circuit which fully utilizes the bipolar transistor features achieves 10 times the speed of a CMOS gate circuit with the same input capacitance and operating at 3.3 V supply voltage. In order to lower the minimum supply voltage of Hβ-BiCMOS, a BiCMOS circuit configuration using a charge pump to pull up the output high level of the BiCMOS gate circuit is proposed. By introducing a BiCMOS charge pump, Hβ-BiCMOS achieves very high speed operation at sub-2.0 V supply voltage. It has also been demonstrated that only a very small number of charge pump circuits are required to drive a large number of Hβ-BiCMOS gate circuits     

1.5V高速全摆幅BiCMOS逻辑电路的研究

分析了影响ＢｉＣＭＯＳ全摆幅输出和高速度的因素,探索了一种新的抑制ＢＪＴ过饱和和反馈网络,提出了具有高速全摆幅输出的ＢｉＣＭＯＳ逻辑单元。该单元可以工作于１．５Ｖ,并且易于多输入扩展,它特别适于ＶＬＳＩ设计。模拟结果表明,该单元实现了优于ＣＭＯＳ的全摆幅输出,且其速度高于同类ＣＭＯＳ电路１０倍以上。     

A delay model and optimization method of a low-power BiCMOS logiccircuit

A new delay model and optimization method is proposed for a low-power BiCMOS driver. A transient overdrive, base directly-tied complementary BiCMOS logic circuit operates faster than conventional BiCMOS and CMOS circuits for supply voltage down to 1.5 V by using a speed-power-area optimization approach. An analytical delay expression is derived for the first time for a full-swing BiCMOS circuit with short-channel effects. The circuit is simulated with a HSPICE model using 0.8-μm BiCMOS technology with a 6-GHz n-p-n and a 1-GHz p-n-p transistor. The simulation results have verified the analytical results and demonstrated that the circuit can work up to 200 MHz operating frequency for a load capacitance of 1 pF at 1.5 V of supply voltage     

Design of a 1.5 V full-swing bootstrapped BiCMOS logic circuit

A low voltage full-swing BiCMOS bootstrapping technique that allows the design of BiCMOS logic circuits at supply voltages down to 1.5 V is presented. This is the first 1.5-V design technique that does not require complementary bipolar devices. The technique is shown to have significant advantages over existing low voltage BiCMOS logic designs in sub-3 V operation. Inverter gates fabricated using a 0.8-μm technology were operated at 150 MHz with a supply voltage of 1.5 V. Implementation of this technique on dynamic logic is also demonstrated and experimental results match closely with simulation     

2.5-V bipolar/CMOS circuits for 0.25-μm BiCMOS technology

An ECL circuit with an active pull-down device, operated from a CMOS supply voltage, is described as a high-speed digital circuit for a 0.25-μm BiCMOS technology. A pair of ECL/CMOS level converters with built-in logic capability is presented for effective intermixing of ECL with CMOS circuits. Using a 2.5-V supply and a reduced-swing BiNMOS buffer, the ECL circuit has reduced power dissipation, while still providing good speed. A design example shows the implementation of complex logic by emitter and collector dottings and the selective use of ECL circuits to achieve high performance     

BiCMOS nonthreshold logic for high-speed low-power applications

New high-speed low-power BiCMOS nonthreshold logic (BNTL) circuits are presented. These circuits offers a built-in CMOS and bipolar level conversion and are suitable for reduced power supply voltage. A 4-b carry lookahead generator (CLG) circuit is designed in BNTL, ECL, and CMOS using 0.8-μm BiCMOS technology. Circuit simulations show that this new logic provides speed comparable to or better than that provided by emitter-coupled logic (ECL) for lower power dissipation     

Low-voltage dynamic BiCMOS CLA circuit with carry skip using novelfull-swing logic

This paper presents novel low-voltage dynamic BiCMOS logic gates and an improved carry look-ahead (CLA) circuit with carry skip using these new dynamic BiCMOS topologies. The well-known “MOS clock feedthrough effect” is used to achieve full swing with substantially reduced low-to-high evaluation delay in the logic gates, thus, resulting in reduced carry propagation/bypass delay in the cascaded CLA array. Simulations at clocking frequency of 100 MHz, using 2-μm BiCMOS process parameters and supply voltage in the range of 2-4 V displays lower gate delay and lower power dissipation compared to other recent dynamic BiCMOS logic topologies. The circuit has no dc power dissipation, race, or charge redistribution problems. An 8-b CLA with 5-b carry skip was achieved in 2.917 ns. This speed is significantly higher than other recent dynamic BiCMOS CLA designs. In addition, the new CLA circuit is more compact compared to previous dynamic BiCMOS CLA designs. A tiny chip was fabricated using the MOSIS Orbit Analog 2-μm V-well CMOS process for the experimental verification of the new low-voltage dynamic BiCMOS topologies     

Low supply voltage operation of over-40-Gb/s digital ICs based on parallel-current-switching latch circuitry

We implemented a low-voltage latch circuit topology in a full-rate 4:1 multiplexer (MUX) using InP-HBT technology. The proposed latch circuitry incorporates parallel current switching together with inductive peaking a combination that makes it suitable for over-40-Gb/s operation at supply voltages ranging from 1.5 to 1.8 V. The full-rate 4:1 MUX provided 40-Gb/s error-free operation with a power dissipation of only 1 W at a supply voltage of 1.8 V. The D-flip/flop (D-F/F) based on this latch circuitry provided 50-Gb/s D-F/F operation at a supply voltage as low as 1.5 V. Demultiplexing operation was also confirmed for the D-F/F with this circuit technology at a data rate of up to 110Gb/s with a 1.8-V supply voltage. The latch circuitry should help enable development of a low-voltage 40-Gb/s full-rate module which can be seamlessly connected with high-speed CMOS I/O circuits.     

Novel high speed circuit structures for BiCMOS environment

Novel high speed BiCMOS circuits including ECL/CMOS, CMOS/ECL interface circuits and a BiCMOS sense amplifier are presented. A generic 0.8 μm complementary BiCMOS technology has been used in the circuit design. Circuit simulations show superior performance of the novel circuits over conventional designs. The time delays of the proposed ECL/CMOS interface circuits, the dynamic reference voltage CMOS/ECL interface circuit and the BiCMOS sense amplifier are improved by 20, 250, and 60%, respectively. All the proposed circuits maintain speed advantage until the supply voltage is scaled down to 3.3 V     

Study of BiCMOS logic gate configurations for improved low-voltageperformance

A simple BiCMOS configuration employing the source-well tie PMOS/n-p-n pull-down combination is proposed for low-voltage, high-performance operations. The improved BiCMOS gate delay time over that of the NMOS/n-p-n (conventional) BiCMOS gate is confirmed by means of inverter simulations and measured ring oscillator data. The source-well tie PMOS/n-p-n BiCMOS gate outperforms its conventional BiCMOS counterpart in the low-voltage supply range, at both high and low temperatures. A critical speed path from the 68030 internal circuit is used as a benchmark for the proposed BiCMOS design technique. The measured propagation delay of the BiCMOS speed path is faster than its CMOS counterpart down to 2.3 V supply voltage at -10°C and sub-2 V at 110°C     

A 200 MHz pipelined multiplier using 1.5 V-supply multiple-valuedMOS current-mode circuits with dual-rail source-coupled logic

A new multiple-valued current-mode MOS integrated circuit is proposed for high-speed arithmetic systems at low supply voltage. Since a multiple-valued source-coupled logic circuit with dual-rail complementary inputs results in a small signal-voltage swing while providing a constant driving current, the switching speed of the circuit is improved at low supply voltage. As an application to arithmetic systems, a 200 MHz 54×51-b pipelined multiplier using the proposed circuits with a 1.5 V supply voltage is designed with a 0.8-μm standard CMOS technology. The performance of the proposed multiplier is evaluated to be about 1.4 times faster than that of a corresponding binary implementation under the normalized power dissipation. A prototype chip is also fabricated to confirm the basic operation of the multiple-valued arithmetic circuit     

3.3-V BiCMOS current-mode logic circuits for high-speed adders

New high-speed BiCMOS current mode logic (BCML) circuits for fast carry propagation and generation are described. These circuits are suitable for reduced supply voltage of 3.3-V. A 32-b BiCMOS carry select adder (CSA) is designed using 0.5-μm BiCMOS technology. The BCML circuits are used for the correct carry path for high-speed operation while the rest of the adder is implemented in CMOS to achieve high density and low power dissipation. Simulation results show that the BiCMOS CSA outperforms emitter coupled logic (ECL) and CMOS adders     

0.5-μm 3.3-V BiCMOS standard cells with 32-kilobyte cache andten-port register file

BiCMOS standard cell macros, including a 0.5-W 3-ns register file, a 0.6-W 5-ns 32-kbyte cache, a 0.2-W 3-ns table look-aside buffer (TLB), and a 0.1-W 3-ns adder, are designed with a 0.5-μm BiCMOS technology. A supply voltage of 3.3 V is used to achieve low power consumption. Several BiCMOS/CMOS circuits, such as a self-aligned threshold inverter (SATI) sense amplifier and an ECL HIT logic are used to realize high-speed operation at the low supply voltage. The performance of the BiCMOS macros is verified using a fabricated test chip     

Full-swing Schottky BiCMOS/BiNMOS and the effects of operatingfrequency and supply voltage scaling

Novel full-swing BiCMOS/BiNMOS logic circuits which use Schottky diode in the pull-up section for low supply-voltage regime are developed. The full-swing pull-up operation is performed by saturating the bipolar transistor with a base current pulse. After which, the base is isolated and bootstrapped to a voltage higher than V_DD. The BiCMOS/BiNMOS circuits do not require a PNP bipolar transistor. They outperform other BiCMOS circuits at low supply voltage, particularly at 2 V using 0.5 μm BiCMOS technology. Delay, area, and power dissipation comparisons have been performed. The new circuits offer delay reduction at 2 V supply voltage of 37% to 56% over CMOS. The minimum fanout at which the new circuits outperform CMOS gate is 2 to 3. Furthermore, the effect of the operating frequency on the delay of a wide range of BiCMOS and BiNMOS circuits is reported for the first time, showing the superiority of the Schottky circuits