Proposed Fire Safety Ranking System EB-FSRS for Existing High-Rise Nonresidential Buildings in Hong Kong

A Fire Safety Ranking System (EB-FSRS) is proposed for assessing the fire safety provisions in existing high-rise nonresidential buildings in Hong Kong. The objective is to investigate how far the fire safety provisions in those existing buildings deviate from the expectation of new codes. Suitable fire safety management can then be worked out in the transition period, based on the scores. Local fire codes were reviewed first to decide what should be the attributes and their weightings. From the reviewing results, three groups of attributes were proposed in the EB-FSRS. These are the passive building construction, active fire protection systems (fire services installation), and key risk parameters, all following the local fire safety requirements. The concept is similar to those equivalent concepts on fire safety parameters of the National Fire Protection Association–Fire Safety Evaluation System (NFPA-FSES). But the EB-FSRS is not a “trade-off” exercise. Thirty-seven old high-rise buildings were rated by studying their architectural features, interior details, and fire safety provisions. Scores under EB-FSES and NFPA-FSES are also compared.     

Fuzzy Decision-Making Tool for Environmental Sustainable Buildings

Several alternatives are being attempted to obtain the sustainable residential building, based on the acceptable level of environmental impact and socio-economic characteristics of residential building. These criteria are in conflict each other, thus it is very difficult to assess or find the sustainable residential building. This paper presents a methodology of the assessment for residential building that is intended to assist the decision making for the building planners or practitioners. The results show that this approach can effectively work for the quantitative evaluation and selection of the best alternative of the residential buildings considered, especially when conflict relation exists. This approach allows the planner or construction companies to test design strategies against different sets of criteria.     

Web-Based Client Advisory Decision Support System for Design–Builder Prequalification

The design–build procurement route is gaining popularity and being extensively used by many clients. Scrutinizing the capabilities of design–build “candidate” organizations (who submit proposals for prequalification/short listing), is a complex task that demands the evaluation of several quantitative and qualitative attributes. The crucial task of design–builder prequalification needs multidisciplinary expertise that often poses tough challenges to many construction clients. A Hong Kong based cross-sectional research study of various international clients’ design–builder selection approaches unveiled several selection strategies and criteria used; and benchmarked some best practices. Based on such consolidated knowledge, a structured design–builder selection model was developed. The conceptualized frameworks for design–builder prequalification are described in this paper. An overview of the development and preliminary validation of a prototype web-based decision support system for design–builder prequalification is also presented in this paper.     

Site Layout Planning using Nonstructural Fuzzy Decision Support System

Site layout planning can affect productivity and is crucial to project success. However, as construction is heterogeneous in the nature of its organizations, project designs, time constraints, environmental effects, etc., site layout planning for each project becomes unique. Affected by many uncertainties (variables) and variations, site layout planning is a typical multiobjective problem. To facilitate the decision-making process for these problems, a nonstructural fuzzy decision support system (NSFDSS) is proposed. NSFDSS integrates both experts’ judgment and computer decision modeling, making it suitable for the appraisal of complicated construction problems. The system allows assessments based on pairwise comparisons of alternatives using semantic operators that can provide a reliable assessment result even under the condition of insufficient precise information.     

Decision Support System for Microtunneling Applications

Microtunneling is a trenchless technology method used for installing new pipelines. The inherent advantages of this method over open-cut trenching have led to its increasing use since its first introduction into North America in the early 1980s. With this technology, surface disruption can be minimized, especially in urban areas, and high accuracy of installation (usually less than 2?cm over 100?m) can be achieved in both line and grade. But microtunneling machines are very expensive and few contractors have extensive experience with this technology. Microtunneling can also be risky when unexpected obstacles or soil changes occur. Careful constructability analysis is needed, and an appropriate microtunneling method should be selected in order to achieve successful completion of microtunneling projects. A computerized decision support system (DSS) for microtunneling was developed to support decision making for contractors who want to bid on microtunneling projects. This paper discusses the decision-making process for microtunneling and the development of the DSS. When the user enters basic information about the potential project such as drive length, installation depth, pipe diameter, and soil condition, the DSS evaluates whether microtunneling will be economically feasible and suggests appropriate types of microtunneling methods. The user can then select microtunneling machines, types of pipes, and types of shaft construction methods. This DSS is most beneficial when used at the preplanning stage by utility contractors.     

Integrated Decision Support for Roadway Safety Analysis

This paper presents an integrated decision-support framework that helps public agencies identify high-crash locations and develop cost-effective safety improvement projects. State-of-the-art safety concepts, such as safety performance functions, empirical Bayesian method, and potential for safety improvements, are incorporated to identify hazardous highway locations. Cost-effective safety projects are prioritized based on life-cycle safety benefit evaluation and optimal resource allocation models. An efficient solution algorithm to the optimization model is also proposed. The models are implemented in an internet-based, geographic information system (GIS) software tool that builds on state-of-the-art information technologies, graphical interfaces, and customized GIS algorithms such as spatial analysis with buffering operations.     

Decision Support System for Scheduling Steel Fabrication Projects

One of the most important and difficult problems faced by the steel fabrication industry is the planning and scheduling of shop activities. Competitive pressures force fabricators to disrupt schedules in progress to accommodate frequent requests from key customers for changes in design and/or delivery schedules. Capacity management is a complex problem and is key to proper management of manufacturing/fabrication activities. This paper presents a decision support system for planning and scheduling of steel fabrication projects. Although the immediate application of this approach is steel fabrication, its fundamental heuristic approach can be applied to any construction job shop scheduling exercise. Its main advantage over techniques such as CPM is that it is resource driven; its advantages over simulation techniques are its simplicity and overall schedule development time.     

Decision Support System for Surface Irrigation Design

The SADREG decision support system was developed to help decision makers in the process of design and selection of farm surface irrigation systems to respond to requirements of modernization of surface irrigation—furrow, basin, and border irrigation. It includes a database, simulation models, user-friendly interfaces, and multicriteria analysis models. SADREG is comprised of two components: design and selection. The first component applies database information, and through several simulation and computational tools, produces a set of design alternatives in agreement with the user options. These alternatives are characterized by several hydraulic, economic, and environmental indicators that allow appropriate selection and ranking. The selection component bases upon multicriteria analysis using composite programming and ELECTRE II ranking models, which support the decision maker to select the best alternative. The decision maker participates in all decision processes through a user-friendly interface that allows expressing design options and priorities. SADREG was tested with data collected from field experiments. In addition to describing the modeling approach, an application to a sector of the Lower Mondego Irrigation Project, Portugal, is presented.     

Simulation-Based Decision Support System for Economical Supply Chain Management of Rebar

The economics of a materials management system is defined by the size of the shipments, the scheduling strategy that allows contractors to handle uncertainty and variability in the supply chain, and the timing of the shipments, which in turn depend on the environment in which the project is taking place. This study presents a simulation-based decision support system to assist contractors in selecting the most economical rebar management system prior to the start of construction by recommending lot sizes (large, small), a scheduling strategy (optimistic, neutral, pessimistic), and buffer sizes (large, medium, small) given the conditions of the project. This model is of benefit to contractors and researchers because it generates the probable cost of inventory of 18 alternative rebar management systems ranging from just in case (JIC) to just in time (JIT) and including different variations in between. It allows contractors to select the alternative with least cost of inventory at the planning stages of a project. The simulation model was tested by using actual data obtained from a trade center project in Istanbul, Turkey. As expected, the test indicated that JIC was the most economical rebar management system in a case study conducted in a developing country, as it generated a savings of 4.8% over JIT.     

Predesign Cost Estimating Method for Multistory Buildings

Historical building costs are used to derive the mathematical relationship among the cost, height, and typical floor area of multistory office buildings. The method of least squares is used to select the functional form of the cost equation. The results of the derived model are compared with the cost book estimates.     

Decision Support Systems for Efficient Irrigation in the Middle Rio Grande Valley

Water is the lifeblood of the American West and the foundation of its economy, but it remains its scarcest resource. The explosive population growth in western United States, the emerging additional need for water for environmental uses, and the national importance of the domestic food production are driving major conflicts between these competing water uses. The case of the Middle Rio Grande illustrates the problem very well. The river is the ecological backbone of the Chihuahuan Desert region in the western United States, and supports its dynamic and diverse ecology, including the fish and wildlife habitat. The Rio Grande Silvery Minnow is federally listed as an endangered species, and the irrigated agriculture in the Middle Rio Grande has come under increasing pressure to reduce its water consumption and maintain the desired level of service to its water users. This paper will present the writers ongoing research on options to make irrigation system operations more efficient in the Middle Rio Grande Conservancy District (MRGCD). Specifically, it will describe formulation and implementation of a decision support system (DSS) that can assist the MRGCD managers to more efficiently plan and implement their water delivery operations, thereby reducing river diversions. The MRGCD DSS uses linear programming to find an optimum water delivery schedule for canal service areas in the MRGCD irrigation system. The computer model is presently formulated along with the related data sets for two of the four divisions in the MRGCD. For the past 3?years, the model has been validated in the field and the evaluation indicates that the model recommendations are realistic and represent current management practices. The future plans are to complete the data files for the irrigation networks in the remaining two divisions and concurrently help the MRGCD implement the DSS to guide water delivery operation.     

Knowledge-Enabled Decision Support System for Routing Urban Utilities

This paper presents a Web-based system for supporting the selection of the most suitable routes for buried urban utilities. The aim of the proposed system is to support (not make) decisions through a collaborative semiautomated environment, in which stakeholders can share information and/or study the impacts of different routing alternatives with respect to decision constraints. First, the knowledge relating to route selection for urban utilities is represented through an ontology. The ontology defines the types and attributes of infrastructure products and the surrounding areas. It also defines the impacts of routing options on surrounding areas through a set of decision criteria adopted to evaluate the effectiveness of any route in terms of its potential impacts. A set of constraints are also defined to help represent/study the decision criteria. Second, a GIS-based system has been created to help visualize route data, interact with users, and support the needed discussions among stakeholders. The portal also achieves data interoperability through wrapping existing geospatial data with ontology structures. Finally, a set of reasoners have been created to help quantify/augment some of the constraints. The system is capable of (1)?extracting the attributes of each routing option, (2)?testing the interaction/conflicts between route attributes and the constraints of the surrounding area, (3)?studying the impacts of a route as stipulated in the ontology, (4)?referring users to existing best practices to help enhance routes or address conflicts and, when needed, (5)?develop objective measures for comparing different routes. On the microlevel (street level), route options are evaluated through a “constraint-satisfaction” approach. On the macrolevel (city level), route options are evaluated through a fuzzy inference scoring system. The proposed system focuses on facility life cycle, sustainability, and community impacts. Construction costing, scheduling, labor, and equipment along with other management issues can either be added to the system or, better, analyzed through integrating the system with four-dimensional (4D) modeling tools.     

Integrated Decision Support System for Optimal Renewal Planning of Sewer Networks

Municipalities are under increasing pressure to adopt proactive and optimized renewal strategies to reduce the risks, life-cycle costs, and resources needed to maintain acceptable performance and service levels of their infrastructure assets. A new integrated approach for optimal renewal planning of municipal infrastructure systems has been developed. This paper discusses the application of the proposed approach to implement a GIS-based decision support system (DSS) to support the renewal planning of sewer networks. Condition rating, risk assessment, and prioritization techniques are described. A procedure for identifying and selecting the most suitable renewal technologies is also presented. A genetic algorithm-based multiobjective optimization technique is used to find a Pareto front of feasible solutions, each comprising a set of sewers to be renewed each year, along with the associated costs and expected benefits in terms of condition improvement and risk reduction. The paper also presents an example application of the prototype DSS on the sewer network in Regina, Canada.     

Decision Support System for Stakeholder Involvement

Stakeholder involvement is essential to the development of a total maximum daily load (TMDL) and its implementation plan. A tool, beyond a simulation model, is needed to support the decision making process that requires negotiation and compromise among stakeholders. The decision support system (DSS) described herein has a TMDL module to calculate various combinations of point and nonpoint loads that can meet the water quality criteria. Its Consensus module allows stakeholders to formulate, evaluate, modify, and vote for alternatives. The DSS displays bar charts for pollution loads from various subwatersheds and attributes the nonpoint loads to land uses. The water quality consequence of the pollution loads is output in maps, which shows sections meeting criteria in green and those not in red. The DSS requires a front end effort of site specific adaptation and model calibration. An Internet-based stakeholder process was developed to allow more concerned citizens to participate in management decisions.     

Decision Support System to Evaluate and Compare Concession Options

With the increased popularity of concession projects over the last three decades, there is a need for a decision support system (DSS) capable of evaluating and comparing several concession project investment (CPI) options in an effective and efficient manner. Hence, a novel DSS has been developed that takes into consideration both financial and nonfinancial aspects of the investment option, as well as the uncertainties commonly encountered during the feasibility stage of a project. The DSS is fully implemented as a standalone computer software package, ECCO (evaluate and compare concession options), in order to be of practical use. This paper outlines and validates ECCO’s design and structure through the demonstration of its capabilities in the evaluation and comparison of three real-life CPI case studies.     

Decision Support System for Monthly Operation of Hydropower Reservoirs: A Case Study

This paper presents a decision support system for multipurpose reservoir operation. The mathematical models in the system are formulated for monthly operation of hydropower reservoirs. The key components of the system are four main modules: database management, inflow modeling and forecasting, operation management, and real-time operation. Flexibility is the key feature of the system, providing the users with different decision tools and different indices for measuring the performance of each tool. A cost function is developed based on the present value of the total capital cost and the cost of operation and maintenance of the system. This cost function, which is developed based on “reasonable” estimates of water and energy prices, is used to measure the performance of reservoir operation policies. A utility function based on multicriterion decision making (MCDM) that uses an analytical hierarchy process is also developed. The MCDM utility function enables decision makers to incorporate the priority of different objectives in developing optimal operating policies and can be effectively used when the priority of objectives is not clear and the decision-making process relies mainly on the decision maker’s preferences. Both economic and MCDM utility functions are implemented and coupled with deterministic and stochastic optimization models. The decision support system (DSS) is applied to the largest surface water resources system in Iran, namely, the Dez and Karoon river-reservoir system. The results of the case study have shown that the DSS has been able to significantly increase the long-term power generation of the system while satisfying water demands for different purposes.     

Decision Support System for Manufactured Housing Facility Layout

Productivity improvement of manufactured housing (MH) production systems has been a great concern to manufacturers and production managers. Studies show that a typical manufactured housing plant fails to produce at desired capacity and production rate because of several shortcomings. The evaluation of the production system efficiency in the factory is essential for meeting the growing demand of customers with respect to design and size of the housing product. It is imperative to explore alternative layout designs that would be more efficient and productive. A decision support system (DSS) is proposed to assist the user in selecting an efficient layout design matching specified requirements and business constraints. The DSS framework covers interrelated factors of: (1) the market demand; (2) MH organization; (3) MH production process; and (4) MH production planning and facility design. Existing MH factories can utilize simulation and optimization components of the DSS in streamlining their activities and locating then solving potential bottlenecks. Additionally, the DSS can be used in selecting optimal production system layout for new plant design.     

Using Group Decision Support System to Support Value Management Workshops

A group decision support system (GDSS) is an interactive computer-based information system that combines the capabilities of communication technologies, database technologies, computer technologies, and decision technologies to support the identification, analysis, formulation, evaluation, and solution of semistructured or unstructured problems by a group in a user-friendly computing environment. As there is a strong demand for improvements to the practice of value management (VM), research has been conducted to design a GDSS prototype system, named the interactive value management system (IVMS), to explore its potential application in VM workshops and to investigate the effect of the application. The paper begins with an introduction to the problems of implementing VM in the Hong Kong construction industry and then proceeds to an illustration of the features of the proposed system, which has been developed in the research. Two validation studies designed to test the support of the proposed system are described and the results discussed. Findings from this research indicate that IVMS is supportive in overcoming the problems and difficulties in VM workshops.     

Thermal and Economic Evaluation of Slab-on-Grade Insulation in Wood-Framed Buildings

This paper presents a new one-equation model, and case studies utilizing it, for evaluating the thermal effectiveness of slab-on-grade perimeter insulation in common wood-framed buildings for any time period such as a month, a season, or an entire year. Many previous studies focused on heat losses in very cold climates, but this new model can be effective for both heating and cooling in potentially any climate that has coefficients available. Two case studies, of residential and commercial buildings, are presented in this paper for three levels of foundation insulation and for three different, somewhat-warm to somewhat-cold, climates. Economic analyses of their heating seasons, cooling seasons, and annual performance are then presented, and the overall worthiness of the insulation, from energy cost and other perspectives, is discussed. The hand calculation method presented differs from previous efforts because it uses a new, single transient analytical equation and site-specific coefficients. The model gives designers, builders, and code officials, for example, the specific, defensible information needed to make decisions on whether insulation is needed. For the residential and commercial building examples presented at least a minimal amount of perimeter insulation is justified, both thermally and economically, for at least two of the three locations studied.     

Entropic Risk Analysis by a High Level Decision Support System for Construction SMEs

The method of entropy has been useful in evaluating inconsistency on human judgments. This paper illustrates an entropy-based decision support system called e-FDSS to the solution of multicriterion risk and decision analysis in projects of construction small and medium enterprises (SMEs). It is optimized and solved by fuzzy logic, entropy, and genetic algorithms. A case study demonstrated the use of entropy in e-FDSS on analyzing multiple risk criteria in the predevelopment stage of SME projects. Survey data studying the degree of impact of selected project risk criteria on different projects were input into the system in order to evaluate the preidentified project risks in an impartial environment. Without taking into account the amount of uncertainty embedded in the evaluation process; the results showed that all decision vectors are indeed full of bias and the deviations of decisions are finally quantified providing a more objective decision and risk assessment profile to the stakeholders of projects in order to search and screen the most profitable projects.