非线性系统开闭环PID型迭代学习控制算法的鲁棒性

针对非线性时变系统的迭代学习控制问题提出了一种开闭环PID型迭代学习控制律,并证明了系统满足收敛条件时,具有开闭环PID型迭代学习律的一类非线性时变系统在动态过程存在干扰的情况下控制算法的鲁棒性问题.分析表明,系统在状态干扰、输出干扰和初态干扰有界的情况下跟踪误差有界收敛,在所有干扰渐近重复的情况下可以完全地跟踪给定的期望轨迹.     

具有输入死区的非线性系统的鲁棒重复控制

针对一类输入含死区非线性特性的周期时变系统, 在周期时变参数不可参数化的情形下设计鲁棒重复控制器. 采用微分自适应律估计未知死区参数, 剩余的有界项通过鲁棒方法予以消除, 为避免出现颤振现象, 采用饱和函数替代符号函数. 在系统输出跟踪周期轨迹的情形下, 将非参数化不确定项转化为含周期时变参数的形式, 以达到利用周期学习律进行估计的目的. 理论分析与仿真结果表明, 采用部分饱和或全饱和学习算法均能实现输出误差有界收敛, 并保证闭环系统所有信号有界.     

一类非线性时变系统的鲁棒输出跟踪控制

研究一类具有非匹配不确定性的非线性时变系统的鲁棒状态反馈输出跟踪控制器设计问题。通过引入非线性时变系统的相对阶将系统输入输出线性化,然后设计出一种基于标称系统和不确定性上界的连接型鲁棒输出跟踪控制器,利用该方案设计的控制器可保证整个闭环系统是一致有界稳定的,且闭环输出可以渐近跟踪期望的轨迹。     

非线性参数化系统自适应迭代学习控制

研究一类含有未知时变参数的非线性参数化系统的学习控制问题.利用参数分离技术和信号置换思想,通过置换系统方程,合并所有时变参数为一个未知时变参数,用迭代自适应方法估计该未知参数,设计了一种自适应迭代学习控制方法,使得跟踪误差的平方在一个有限区间上的积分渐近收敛于零.通过构造一个类Lyapunov函数,给出了跟踪误差收敛和所有闭环系统信号有界的一个充分条件.仿真结果验证了该方法的有效性.     

周期时变时滞非线性参数化系统的自适应学习控制

针对一阶未知非线性参数化周期时变时滞系统, 设计了一种自适应学习控制方案. 假设未知时变参数, 时变时滞和参考信号的共同周期是已知的, 通过重构系统方程, 将包含时变时滞在内的所有未知时变项合并成为一个周期时变向量, 采用周期自适应律估计该向量. 通过构造一个Lyapunov-Krasovskii型复合能量函数证明了所有信号有界并且跟踪误差收敛. 结果被推广到一类含有混合参数的高阶非线性系统. 通过两个仿真例子说明本文所提出的控制算法的有效性.     

基于观测器的非线性互连系统的自适应模糊控制

针对一类不确定非线性MIMO互连系统,提出一种自适应模糊控制算法.通过设计观测器来估计系统的状态,因此不要求假设系统的状态是可测的.给出的自适应律只对不确定界进行在线调节,从而大大减轻了在线计算负担.该算法能够保证闭环系统的所有信号是一致有界的,并且跟踪误差指数收敛到一个小的零邻域内.仿真结果表明了算法的可行性.     

基于观测器的非线性时变时滞系统自适应重复控制

针对一类未知时变时滞非线性系统,提出一种基于观测器的重复控制方案．采用线性矩阵不等式设计非线性观测器,所设计的控制律含有ＰＩＤ 反馈项,常值参数自适应律是微分差分型的,时变参数学习律是差分型的．在假设未知时变时滞、时变参数和参考输出的周期有已知的最小公倍数下,通过构造一个Ｌｙaｐｕｎｏｖ-Ｋｒａｓｏｖｓｋｉｉ型复合能量函数,证明了所有闭环信号有界且输出跟踪误差收敛．仿真实例表明了算法的有效性．     

一类非线性时滞输出反馈系统的自适应控制

针对一类参数化非线性时滞输出反馈系统,提出了一种无记忆自适应跟踪控制器的设计方案.采用时滞滤波器估计系统状态,用Domination处理非线性时滞项,应用Backstepping技术设计控制器和参数自适应律.放宽了对时滞项的要求.通过构建一个Lyapunov＿Krasoviskii泛函,证明了闭环系统的稳定性,实现了对目标轨线的渐近跟踪,保证了所有信号一致有界.实例仿真说明了该方案的可行性.     

一类MISO 最小相位系统的执行器故障自适应容错控制

针对一类具有执行器卡死或/和变执行器故障的多输入单输出(MISO)非线性最小相位系统,提出一种自适应容错跟踪控制方案.采用自适应算法估计系统的不确定性,利用神经网络逼近执行器未知故障函数,以完成执行器组合故障状态下的跟踪控制.所设计的控制律不仅保证了闭环系统稳定,而且所有状态均有界,跟踪误差一致最终有界.仿真结果表明了所提出方法的有效性.     

输入具有齿隙非线性特性的周期系统的自适应控制

针对一类输入含齿隙非线性动态特性的周期时变系统, 在周期不确定性可时变参数化的条件下设计自适应控制器. 对周期时变参数进行傅里叶级数展开, 并采用微分自适应律估计未知傅里叶系数和齿隙动态特性参数, 通过鲁棒方法消除截断误差和齿隙模型的有界误差项对系统性能的影响. 采用双曲函数替代符号函数确保控制器可微, 同时能有效抑制颤振. 引入Δ函数, 避免参数估计发散, 并保证系统输出渐近跟踪理想轨迹. 理论分析与仿真结果表明, 闭环系统所有信号有界.     

Robust adaptive quantized DSC of uncertain pure‐feedback nonlinear systems with time‐varying output and state constraints

In this paper, the problem of neural adaptive dynamic surface quantized control is studied the first time for a class of pure‐feedback nonlinear systems in the presence of state and output constraint and unmodeled dynamics. The considered system is under the control of a hysteretic quantized input signal. Two types of one‐to‐one nonlinear mapping are adopted to transform the pure‐feedback system with different output and state constraints into an equivalent unconstrained pure‐feedback system. By designing a novel control law based on modified dynamic surface control technique, many assumptions of the quantized system in early literary works are removed. The unmodeled dynamics is estimated by a dynamic signal and approximated based on neural networks. The stability analysis indicates that all the signals in the closed‐loop system are semiglobally uniformly ultimately bounded, and the output and all the states remain in the prescribed time‐varying or constant constraints. Two numerical examples with a coarse quantizer show that the proposed approach is effective for the considered system.     

Transient performance for discrete‐time singular systems with actuators saturation via composite nonlinear feedback control

This paper is concerned with the transient performance improvement in tracking control problems for linear multivariable discrete‐time singular systems subject to actuators saturation. A composite nonlinear feedback control strategy is considered, and the resulting controller consists of a linear feedback law and a nonlinear feedback law without any switching element. The nonlinear term leads to a varying damping ratio of the closed‐loop system and yields a small overshoot as the output approaches the target reference, whereas the linear component is designed to achieve a quick response of the closed‐loop system. Two composite nonlinear feedback control laws by both state feedback and measurement output feedback are addressed. An illustrative example is included to show the validity of the obtained results. Copyright © 2012 John Wiley & Sons, Ltd.     

Global Practical Tracking for Nonlinear Systems With More Unknowns via Adaptive Output‐Feedback

This paper investigates the global practical tracking via adaptive output‐feedback for a class of uncertain nonlinear systems. Essentially different from the closely related literature, the system under investigation possesses unknown time‐varying control coefficients and a polynomial‐of‐output growth rate, and meanwhile, the system nonlinearities and the reference signal allow serious unknowns. For this, an adaptive observer is designed to reconstruct the system unmeasured states, where a new dynamic gain is introduced to compensate the serious unknowns in the system nonlinearities and the reference signal. Based on this and by backstepping technique, an adaptive output‐feedback controller is successfully designed, such that all the states of the closed‐loop system are bounded, and the tracking error will be prescribed sufficiently small after a finite time. A numerical simulation is provided to demonstrate the effectiveness of the proposed method.     

Finite‐time output tracking for a class of switched nonlinear systems

This paper investigates the finite‐time output tracking for a class of switched nonlinear systems in p‐normal form. Compared with the existing results, the restrictions on power orders of the system are relaxed. Using the convex combination method and the adding a power integrator technique, a state‐dependent switching and law, and state feedback controllers of individual subsystems are constructed. It is shown that all states of the closed‐loop system are bounded, and the tracking error can converge to a small neighborhood of zero in finite time. An example is provided to show the effectiveness of the proposed method. Copyright © 2016 John Wiley & Sons, Ltd.     

Prescribed performance adaptive neural output control for a class of switched nonstrict‐feedback nonlinear time‐delay systems: State‐dependent switching law approach

This paper investigates the tracking problem for a class of uncertain switched nonlinear delayed systems with nonstrict‐feedback form. To address this problem, by introducing a new common Lyapunov function (CLF), an adaptive neural network dynamic surface control is proposed. The state‐dependent switching rule is designed to orchestrate which subsystem is active at each time instance. In order to compensate unknown delay terms, an appropriate Lyapunov‐Krasovskii functional is considered in the constructing of the CLF. In addition, a novel switched neural network–based observer is constructed to estimate system states through the output signal. To maintain the tracking error performance within a predefined bound, a prescribed performance bound approach is employed. It is proved that by the proposed output‐feedback control, all the signals of the closed‐loop system are bounded under the switching law. Moreover, the transient and steady‐state tracking performance is guaranteed by the prescribed performance bound. Finally, the effectiveness of the proposed method is illustrated by two numerical and practical examples.     

一类不确定非线性系统的指数鲁棒输出跟踪

研究一类不确定非线性系统的鲁棒输出跟踪控制问题。应用输入／输出反馈线性化法和李亚普诺夫方法,提出一种基于不确定项上界的连续型鲁棒输出跟踪控制器设计方法。该控制器不仅可确保闭环系统的状态一致最终有界,使系统输出按指数规律跟踪期望输出,而且计算简单,更易实现。仿真结果证明了该方法的可行性与有效性。     

Quantized feedback control for nonlinear feedforward systems with unknown output functions and unknown control coefficients

This paper investigates the quantized feedback control for nonlinear feedforward systems with unknown output functions and unknown control coefficients. The unknown output function is Lipschitz continuous but may not be derivable, and the unknown control coefficients are assumed to be bounded. To deal with this challenging quantized control problem, a time‐varying low‐gain observer is designed and a delicate time‐varying scaling transformation is introduced, which can avoid using the derivative information of the output function. Then, based on the well‐known backstepping method and the sector bound approach, a time‐varying quantized feedback controller is designed using the quantized output, which can achieve the boundedness of the closed‐loop system states and the convergence of the original system states. Moreover, a guideline is provided for choosing the parameters of the input and output quantizers such that the closed‐loop system is stable. Finally, two simulation examples are given to show the effectiveness of the control scheme.     

Robust inverse optimal control laws for nonlinear systems

This work proposes a robust inverse optimal controller design for a class of nonlinear systems with bounded, time‐varying uncertain variables. The basic idea is that of re‐shaping the scalar nonlinear gain of an L_gV controller, based on Sontag's formula, so as to guarantee certain uncertainty attenuation properties in the closed‐loop system. The proposed gain re‐shaping is shown to yield a control law that enforces global boundedness of the closed‐loop trajectories, robust asymptotic output tracking with an arbitrary degree of attenuation of the effect of uncertainty on the output, and inverse optimality with respect to a meaningful cost that penalizes the tracking error and the control action. The performance of the control law is illustrated through a simulation example and compared with other controller designs. Copyright © 2003 John Wiley & Sons, Ltd.     

Adaptive Non‐Backstepping Fuzzy Control for a Class of Uncertain Nonlinear Systems with Unknown Dead‐Zone Input

Based on the approximation property of fuzzy logic systems, we propose a novel non‐backstepping adaptive tracking control algorithm for a class of single input single output (SISO) strict‐feedback nonlinear systems with unknown dead‐zone input. In this algorithm, we introduce some novel state variables and coordinate transforms to convert the strict‐feedback form into a normal one, and it is not necessary to consider the traditional approximation‐based the backstepping scheme. Due to new states variables being unavailable, the tracking control is changed from a state‐feedback one to an output‐feedback one. So, observers need to be designed to estimate the indirect nonmeasurable states. According to Lyapunov stability analysis method, the developed controller can guarantee that all of the signals in the closed‐loop system will be ultimately uniformly bounded (UUB), and the output can track the reference signal very well. Simulation results are presented to show the effectiveness of the proposed approach.